Hi! I just wanted to ASK, if i go to a store and want to buy this crystal clear view cover it Costa around 50 Euro. But on amazon i geht the same looking cover also said to be from samsung for just 11 Euro. Is this possible? Vor would i buy something that later doesnt work anymore?
Thanks, freaky.
Gesendet von meinem SM-G920F mit Tapatalk
Can anyone tell me which back cover good for Indian user availability
I had a cheap version. Satisfied to some extent. It is different from the original for sure. I went with an Otterbox after that
Related
Does anybody knows where i can find the coating of the micro usb port? As you can see on the picture i have a break in it.
I searched already but i dont find these coating.
Mfg
I think, hat it is one piece with the back housing. You should be able to find it on Google. But if i remember right its not that easy to replace.
And also be aware of loosing your waranty by switching it..
Gesendet von meinem HTC Desire mit Tapatalk
domsch1988 said:
I think, hat it is one piece with the back housing. You should be able to find it on Google. But if i remember right its not that easy to replace.
And also be aware of loosing your waranty by switching it..
Gesendet von meinem HTC Desire mit Tapatalk
Click to expand...
Click to collapse
Thx, but my waranty is gone anyway because now it must be older than 2 years.
Everybody who searches these part too
Click Here
Its called back bottom cover
domsch1988 said:
I think, hat it is one piece with the back housing. You should be able to find it on Google. But if i remember right its not that easy to replace.
Click to expand...
Click to collapse
It's fastened with two little screws - you need a T5 Torx screwdriver to loosen/fasten them.
Very easy.
http://viewitem.eim.ebay.fi/HTC-DESIRE-BRAVO-6200-A8181-OEM-BOTTOM-COVER-HOUSING/330707216064/item
I just ordered this for total of 7,89 €.
Superglue held my antenna together about half a year. Then it cracked for good.
Hi,
I've put a TPU case on my N5 without removing the IMEI first. It fit's well, but will it wear out the case (..as the sticker makes the phone slightly thicker)?
I dont think so. I Didnt remove the imei stickers on both my nexus 4 and my nexus 5 and my cases are fine
Sent from my Nexus 4 using Tapatalk
That sticker was one of the first stuff I removed . Don't see the point in keeping it ...
kraven001 said:
That sticker was one of the first stuff I removed . Don't see the point in keeping it ...
Click to expand...
Click to collapse
My case is pretty hard to remove. That's my reason atm
Gesendet von meinem Nexus 5 mit Tapatalk
if you have it in place already forget about it ! I don't see how a small sticker would damage anything.
Hey guys, I just purchased my Style and love it. Since I'm from Spain, we don't have Moto Maker and I wanted the wood back instead of the rubber. I looked on Aliexpress and found the original wood back:
http://www.aliexpress.com/snapshot/7021194170.html?orderId=70233598457754
And here's a link to the rubber backs with all the colours:
http://m.aliexpress.com/item/32497334315.html?tracelog=storedetail2mobilesitedetail
It shouldn't be very difficult to replace it.
WARNING: You might void your warranty.
That is pretty neat. I was wondering if this was available. Would you know how to remove and replace it?
maggotboy said:
That is pretty neat. I was wondering if this was available. Would you know how to remove and replace it?
Click to expand...
Click to collapse
There's a teardown video somewhere on YouTube. Looks like some heat and a little prying.
Sent from my XT1575 using Tapatalk
There is a few tear down videos now. And yes it involves heat and prying off the back which is glued on. Your old back will be wrecked in the process so you better like your new one. I am keen if I can get the right kind of wood back for the right price.
https://www.youtube.com/watch?v=vuewklttaSc
https://www.youtube.com/watch?v=VCCR1knAp6g
I found a listing for Ebony & Walnut. Its a bit pricy, but might be worth it.
http://www.aliexpress.com/item/Orig..._77_91_80,searchweb201644_5,searchweb201560_9
Just ordered the walnut. I bought it with ebony and had it engraved. I regret engraving it now and the ebony did not look like it did on moto maker. Hope this will satisfy my needs!
maggotboy said:
Just ordered the walnut. I bought it with ebony and had it engraved. I regret engraving it now and the ebony did not look like it did on moto maker. Hope this will satisfy my needs!
Click to expand...
Click to collapse
I got the walnut through Moto maker. I love it. Just the right shade.
Please update when you receive them. How they look, if they are the same quality as the original ones, and how easy are they to put in. ?
Sent from my XT1572 using Tapatalk
Package is still in China. Might be a while.
I'd just like to mention after changing my battery cover from black to purple that the accent is easier to change as it's not glued on it slides off as you change the back panel
Just replaced mine today and I love it ?? the phone is more slippery now so I have to use a tempered glass and the provided bumper
TigerCourage said:
Just replaced mine today and I love it ?? the phone is more slippery now so I have to use a tempered glass and the provided bumper
Click to expand...
Click to collapse
Very nice ?? Was it hard to replace it?
Inviato dal mio XT1572 utilizzando Tapatalk
GabryBSK said:
Very nice ?? Was it hard to replace it?
Inviato dal mio XT1572 utilizzando Tapatalk
Click to expand...
Click to collapse
It wasn't hard, just that it took me a while to clean all the old adhesive. Using a hair dryer, the sim tray remover and debit card. I followed a disassembly tutorial on YouTube
Hey guys, I am quite new posting here, but I have been reading the forum for years. I have been looking for the bamboo cover online, for like a week now. So far, I did not have much luck. It's pretty easy to find walnut and ebony on aliexpress and the like, but after asking the sellers for the bamboo one, they say it is not available at all.
The only one I found is on taobao, which as far as I know, only ships to China, the whole website is in chinese... so I am not very sure of what I am buying and if they may ship to Spain. Also the description is not very accurate at all
The link where I found it is:
sea.taobao.com/item/en/41837311878.htm?spm=a1z3n.7398726.0.0.iEn8en
Anyone got luckier than I did?
Anyone knows where to buy the leather back replacement? No luck looking for it.
Throw a dbrand on it..
Sent from my XT1575 using XDA-Developers mobile app
yea just use dbrand so you will not break any wires
Hi!
I'm looking for new protektion and I'm thinking about something with an aluminium frame vor even aluminium backcover. Are there experiences, especially about transmission quality? Which cases are good?
Greetings
MacDidi
Gesendet von meinem Nexus 9 mit Tapatalk
Well, I used aluminium cases before (not on edge+) and they only reduced my wifi and cell signal by half in worst cases.
If you still want one I find this one cool:
http://m.ebay.com/itm/161851665547?_mwBanner=1
Sent from my SM-N930F using Tapatalk
Looks great, thanks. Have to think about signal quality
"Mit Schwund ist zu rechnen!"
Guys... Where on earth is our NFC antenna allocated? I've tried to connect various types of NFC stuff with zero success. Relp :3
The sensor is on backside on top of the Camara. U see a black point. When u don't have the original cover for the phone you can try without cover. The original cover is open on this place.
If it is not working is it maybe defect. I have the same problem with the mate 8. So it was in service, after service it works.
Now I have mate 9. Is much better.
Gesendet von meinem MHA-L29 mit Tapatalk
sascha__w said:
The sensor is on backside on top of the Camara. U see a black point. When u don't have the original cover for the phone you can try without cover. The original cover is open on this place.
If it is not working is it maybe defect. I have the same problem with the mate 8. So it was in service, after service it works.
Now I have mate 9. Is much better.
Gesendet von meinem MHA-L29 mit Tapatalk
Click to expand...
Click to collapse
Will try, thank you.
Is it turned on in the quick settings you should have a nfc logo on the top bar.
sutty86 said:
Is it turned on in the quick settings you should have a nfc logo on the top bar.
Click to expand...
Click to collapse
Yeah, I knew THAT, I just couldn't find the place physically where I should touch, it works now Thanks guys
Where is NFC antenna? It is on the motherboard or on back cover? My phone can interact with payment terminals but don't react to any bank cards. I think it's NFC antenna failure but I can't find it.