Hi,
I have recently purchased a p9 lite and I was planning on putting a screen protector on it, however it seems like to me that something is already on it by default (at least it was like this straight out of the box). See the pictures attached. Is it something I should remove before applying my own protector? do I even need one with this pre-applied?
Unfortunately I cant embed outside links in my message directly because of the forum policy, but here are the links (replace the dots):
www dot starfleet dot hu/rhorvath/p9_top.jpg
www dot starfleet dot hu/rhorvath/p9_bottom.jpg
You should look for 3mk hybrid glass because logo in P9 Lite is not so flat and there could be bubble problem with regular glass protection
ring.ring said:
You should look for 3mk hybrid glass because logo in P9 Lite is not so flat and there could be bubble problem with regular glass protection
Click to expand...
Click to collapse
Thanks for the tip, but that doesn't answer my question
rhorv said:
Hi,
I have recently purchased a p9 lite and I was planning on putting a screen protector on it, however it seems like to me that something is already on it by default (at least it was like this straight out of the box). See the pictures attached. Is it something I should remove before applying my own protector? do I even need one with this pre-applied?
Unfortunately I cant embed outside links in my message directly because of the forum policy, but here are the links (replace the dots):
www dot starfleet dot hu/rhorvath/p9_top.jpg
www dot starfleet dot hu/rhorvath/p9_bottom.jpg
Click to expand...
Click to collapse
You have a plastic screen protector applied from factory.
If you plan to apply a different like tempered glass, first remove the pre applied one. Otherwise you will have touch issues sometimes
Now this help me a bit ..mine came with a screen protector in the accessories box but it didn't have one applied from the factory and I tried 2 different tempered glass ones and both have ended up with an air bubble by the logo..
lilbrat said:
Now this help me a bit ..mine came with a screen protector in the accessories box but it didn't have one applied from the factory and I tried 2 different tempered glass ones and both have ended up with an air bubble by the logo..
Click to expand...
Click to collapse
That's strange. My unit doesn't have this problem
Did anyone try this one out?
http://nillkin.org/smartphones-acce...e-g9-accessories/nillkin-huawei-p9-lite-g9-pe
I looked as much as I could for a screen protector with a cut-out,but I nothing came up.
just tried a glass protector from PULESEN ,left me with huge bubbles around the logo as well ... dont think any of the protectors would work fine given they are all flat... seems to be a problem of the phone really
rhorv said:
just tried a glass protector from PULESEN ,left me with huge bubbles around the logo as well ... dont think any of the protectors would work fine given they are all flat... seems to be a problem of the phone really
Click to expand...
Click to collapse
This may sound extreme,but has anyone tried scratching the logo off(with fingernails,of course)?
My P9 lite (L21) Also came with protector in the accessories box but the shopkeeper told me that its not a glass protector so he applied another glass protector but now i have 2 huge bubbles of air at the bottom.I Wonder if i had asked him to apply original protector that came in the accessories box would bubbles appear even then? Anyone?
Usama707 said:
My P9 lite (L21) Also came with protector in the accessories box but the shopkeeper told me that its not a glass protector so he applied another glass protector but now i have 2 huge bubbles of air at the bottom.I Wonder if i had asked him to apply original protector that came in the accessories box would bubbles appear even then? Anyone?
Click to expand...
Click to collapse
Mine came with the factory protector pre-applied (see the images in my original post) that one is supposed to be just a plastic protector so it is more flexible than the glass one, and I had no bubbles with that on, however probably worse in terms of protection. The choice is yours
I just stumbled upon this one:
http://s.aliexpress.com/3mM3MVfM
I will take the "Black" and the "Clear" one. The "Black" one has a cut-out for the logo,and people in the comments don't complain about the bubble on the logo with the "Clear" one.
As soon as they arrive,I will make a reply describing both.
Sent from my HUAWEI VNS-L21 using Tapatalk
I too experienced the bubble issue but on top and the bottom. Near the logo and around the speaker area. Seems to lift easily at the top and bottoms of the handset is it a shape of the handset? I'm trying to understand before purchasing another.
What is meant by '3mk hybrid glass'?
ShadleyP said:
I too experienced the bubble issue but on top and the bottom. Near the logo and around the speaker area. Seems to lift easily at the top and bottoms of the handset is it a shape of the handset? I'm trying to understand before purchasing another.
What is meant by '3mk hybrid glass'?
Click to expand...
Click to collapse
It's supposed to be flexible glass which won't "reject" a little bump like the logo.
I am using this protector, perfect coating, very hard, fits great, no bubbles...
NILLKIN Amazing PE for Huawei P9 Lite / G9 Lite Anti-blue-ray Tempered Glass Screen Protector
http://s.aliexpress.com/qQZBJb6F
(from AliExpress Android)
Sent from my HUAWEI VNS-L21 using XDA-Developers mobile app
hackras said:
I am using this protector, perfect coating, very hard, fits great, no bubbles...
NILLKIN Amazing PE for Huawei P9 Lite / G9 Lite Anti-blue-ray Tempered Glass Screen Protector
http://s.aliexpress.com/qQZBJb6F
(from AliExpress Android)
Sent from my HUAWEI VNS-L21 using XDA-Developers mobile app
Click to expand...
Click to collapse
I was first going to order that one,but was scared about the possible bubble on the logo. But now I think I will order it.
Thanks for the info!
Sent from my HUAWEI VNS-L21 using Tapatalk
EDIT
I found it for around 8$ on this link:
http://s.aliexpress.com/3eMbIBFB
I bought the tempered glass from HERE
I paid 4.5$ in total(3$ and 1.5$ shipping),and it arrived in only 7 days. The package was snug,I got a little phone bag as a gift,and it is just awesome. Got instructions,wet and dry wipes and dust removal and screen placement stickers.
I will definitely buy another few of the Clear HD ones,and will try with the black frame one.
There were no bubbles around the logo,as visible in the pic. Those bubbles on the top are only because I placed it a bit too far to the top,otherwise those who are skilled at placing it will have a literally perfect fit. It is precisely sized to cover the whole front.
For 4.5$,I pretty much have the 2.5d screen like the P9. xD
"I paid 4.5$ in total(3$ and 1.5$ shipping),and it arrived in only 7 days. The package was snug,I got a little phone bag as a gift,and it is just awesome. Got instructions,wet and dry wipes and dust removal and screen placement stickers.
I will definitely buy another few of the Clear HD ones,and will try with the black frame one.
There were no bubbles around the logo,as visible in the pic. Those bubbles on the top are only because I placed it a bit too far to the top,otherwise those who are skilled at placing it will have a literally perfect fit. It is precisely sized to cover the whole front.
For 4.5$,I pretty much have the 2.5d screen like the P9. xD"
With just 0.2mm thickness. It seems to me a very good choice. Thanks for tip.
lzimbrea said:
That's strange. My unit doesn't have this problem
Click to expand...
Click to collapse
Which glass screenprotector did u use then? because I am having the same problem? :s
Hello,everyone!
I ordered the Black framed tempered glass from HERE.
It arrived and I applied it,but there are some bad things.
The good thing is that there are no bubbles visible.
The bad thing is that the Black glass is a bit smaller than the Full HD Clear one,and its screen zone is smaller than the phone's actual screen. I did manage to balance it out so the cut-out was minimal,but it's still there.
Here are some pics.
Related
Just ordered a 6x, do someone know something about a good tempered glass screen protector?
Is the screen flat or curved on the edges?
flat protector https://www.amazon.co.uk/Protector-APICI-Tempered-Hardness-Anti-fingerprint/dp/B01MG9MLRJ
Thank you, I also found some by googling, I ask about something someone tried.
Sent from my Nexus 6 using XDA-Developers Legacy app
Mine came with some kind of screen protector already stuck on the screen. Also seems to be fairly stubborn to remove, did anyone else's come delivered with it?
Would prefer to have a tempered one, but the one currently on there seems to be made of glass already.
Mvs1989 said:
Mine came with some kind of screen protector already stuck on the screen. Also seems to be fairly stubborn to remove, did anyone else's come delivered with it?
Would prefer to have a tempered one, but the one currently on there seems to be made of glass already.
Click to expand...
Click to collapse
It's probably a plastic PET screen protector, which has really strong glue on it. I doubt Honor would supply their devices with a tempered glass screen protector straight out the box.
My must arrive on Monday, I hope that there will be a protection like on yours..
Edit:
Arrived today and there is a sort of hard protection on the display, not glass but probably policarbonate, invisible.
Sent from my Nexus 6 using XDA-Developers Legacy app
Ordered a tempered glass screen protector from nilkin.org, but after paying i noticed the payment going to some russian name, but nilkin is asian as far as i know.
Also, some reviews on google classify this website as a fake / scam.
So for now, avoid nilkin.org.
The official website doesnt list any honor 6x support, so i'll have to wait and see if what gets delivered actually fits, if it even arrives/was sent at all.
i bought the mr shield
https://www.amazon.com/gp/product/B01M74TFP9/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
didnt like it at all.
if you notice the plastic one that the phone came with it does not cover the screen completely { about 1mm on each side }.
mr shield is exactly the same. makes the phone look bad. im returning this and waiting for someone to make the screen protector correctly
towncarblue said:
i bought the mr shield
https://www.amazon.com/gp/product/B01M74TFP9/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
didnt like it at all.
if you notice the plastic one that the phone came with it does not cover the screen completely { about 1mm on each side }.
mr shield is exactly the same. makes the phone look bad. im returning this and waiting for someone to make the screen protector correctly
Click to expand...
Click to collapse
Thanks for sharing
mine had tempered glass on it already..so no issue faced for this
If you're talking about the screen protector from the factory, it's not glass, just a plastic. It's a finger print magnet for sure too. I ordered one of the newer styles that just came on Amazon. Will update with my thoughts when I comes in in a day or so.
Sent from my Nexus 6P using Tapatalk
madeSICC said:
If you're talking about the screen protector from the factory, it's not glass, just a plastic. It's a finger print magnet for sure too. I ordered one of the newer styles that just came on Amazon. Will update with my thoughts when I comes in in a day or so.
Click to expand...
Click to collapse
Mine was gifted by Huawei in China and had tempered glass.
Does it leave big gaps around the edges or is it more of a full edge style?
Sent from my Nexus 6P using Tapatalk
madeSICC said:
Does it leave big gaps around the edges or is it more of a full edge style?
Click to expand...
Click to collapse
More gaps at edges
Got this one in the mail today: https://www.amazon.com/dp/B01MU7Y0EG/ref=cm_sw_r_cp_apa_40KIyb6NMD2N9
I wanted to try a more edge to edge one and this one is really close. But you do get the raised edges as the curved glass starts. I will see how much it collects dust and probably remove it. It's my wife's phone so she probably won't like it.
Sent from my Nexus 6P using Tapatalk
madeSICC said:
Got this one in the mail today: https://www.amazon.com/dp/B01MU7Y0EG/ref=cm_sw_r_cp_apa_40KIyb6NMD2N9
I wanted to try a more edge to edge one and this one is really close. But you do get the raised edges as the curved glass starts. I will see how much it collects dust and probably remove it. It's my wife's phone so she probably won't like it.
Click to expand...
Click to collapse
Thanks for sharing
Mvs1989 said:
Ordered a tempered glass screen protector from nilkin.org, but after paying i noticed the payment going to some russian name, but nilkin is asian as far as i know.
Also, some reviews on google classify this website as a fake / scam.
So for now, avoid nilkin.org.
The official website doesnt list any honor 6x support, so i'll have to wait and see if what gets delivered actually fits, if it even arrives/was sent at all.
Click to expand...
Click to collapse
Update:
The screenprotector just came in and is the correct one. Unfortunately the same problem persist with the 2.5d glass, the protector doesn't go edge to edge.
So, nillkin.org seems to be legit (enough) to order from. The screen protector box just used a variation on the name 'honor 6x', namely 'Huawei Mate 9 Lite GR5 2017', which is apparently the same phone .
Do not buy
DO NOT BUY.
just got this one from amazon today
https://www.amazon.com/gp/product/B01MR65JJD/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
it broke during installation, the slightest movement destroys it. the material is not really good at all.
i have a TUDIA Slim-Fit HEAVY DUTY case and the protector and there is a small gap between the case and the screen protector.
if the installation would have been successful, doubt it would last more than a day .
gotta keep looking
another do not buy...
the toshion screen protector.
https://www.amazon.com/gp/product/B01M2BM9H4/ref=od_aui_detailpages00?ie=UTF8&psc=1
does not even cover the screen , box reads 6x but i dont think its for a 6x or they really messed up their measurements
use this from amazon.in
http://amzn.to/2k6aTOW
May I know which tempered glass screen protector I should order from eBay or Amazon.ca which will attract less finger print?
There are not any really good ones because of the curved screen. You either are going to have it peel a bit on the edges or the screen protector will be cut well short of the sides.
I went with this film one and although I wanted glass I am happy with it
https://www.amazon.com/gp/product/B01M700TQ2/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
there all terrible tried 5 now not one any good, the film ones are no good for me as there offer no protection from impact..
I'm happy with this.
I use this. http://www.ebay.com/itm/25266402845...49&var=551590088571&ssPageName=STRK:MEBIDX:IT
Ready to have this and sit the dimensions well. https://fr.aliexpress.com/item/Pzoz...663571.html?shortkey=UfIVFz2q&addresstype=600
gomcse2002 said:
May I know which tempered glass screen protector I should order from eBay or Amazon.ca which will attract less finger print?
Click to expand...
Click to collapse
This is the one I am using after trying several different tempered glass. It's not edge to edge but since it so thin you can barely see the gap. The best part is no halo effect and it's super responsive.
http://www.protectionfilms24.com/ar...en-protector-clear-huawei-mate-9-2729860.html
Here's a review on youtube
https://www.youtube.com/watch?v=zEpMWkIPqyQ
I'm on my second Brotect. Didn't like them the first time around but they have grown on me. I don't think they'd offer as much impact protection as a thicker tg, but they also fit and look better on a 2.5d screen.
Sent from my MHA-L29 using Tapatalk
I went with the Supershieldz from Amazon and it has been good for me, works with 3 different case I have tried.
https://www.amazon.com/gp/product/B01N6BCXDJ/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Amazon Mr Shield For Huawei Mate 9
I have the newest Nillkin and it is a bit oversized, which leaves a halo around the edges. Not bad when the screen is on, but very noticeable when the screen is dark. That being said, it did save my bacon this morning. I dropped my phone from about 4 foot up(bobbled the catch) straight onto concrete... it landed on a corner and fell flat on the face. The screen protector did it's job and saved the display. The protector now has a very nice diagonal crack running the entire width, but it still works. Unfortunately, it means I need to buy a new one as Nillkin only provides one in the package. So it is off to Amazon to order my old standby, the SuperShieldz
Okiera29 said:
I have the newest Nillkin and it is a bit oversized, which leaves a halo around the edges. Not bad when the screen is on, but very noticeable when the screen is dark. That being said, it did save my bacon this morning. I dropped my phone from about 4 foot up(bobbled the catch) straight onto concrete... it landed on a corner and fell flat on the face. The screen protector did it's job and saved the display. The protector now has a very nice diagonal crack running the entire width, but it still works. Unfortunately, it means I need to buy a new one as Nillkin only provides one in the package. So it is off to Amazon to order my old standby, the SuperShieldz
Click to expand...
Click to collapse
Get Mr Shield on amazon, include 2 and if you broke one only email with picture and they sent replacement free, it happen to me on Galaxy Tab A and Nexbit Robin and get both free...
Try full covdr
I installed a Cafele glass screen protector the first day i got my Mate 9 and didn't had to replace it in a year.
It's a bit oversized, so it covers the edges, and comes with a liquid that fills the ait bubbles.
You don't really see them anymore.
None of the tempered glass I bought fits to the mate 9. So I took " hydrogel" screen protector on aliexpress and it fits perfect !
Sorry for bad english ≥≤
tenson22000 said:
None of the tempered glass I bought fits to the mate 9. So I took " hydrogel" screen protector on aliexpress and it fits perfect !
Sorry for bad english ≥≤
Click to expand...
Click to collapse
This
Sent from my MHA-L29 using Tapatalk
Hello all, I have tried a couple of tempered glass screen protectors; I have also read many many reviews.
It seems that there is no tempered glass protector that would be full screen; fit (most) cases and does not release on the edges for all.
I actually did not mind the screen protector which was installed by 1+ when I got the phone (and I did not like the tempered glass ones I tried).
So I contacted them today asking if I could buy a couple of those. To my biggest disappointment I was advised that although I am not the first one to ask, they do not consider the included screen protector to be a "product" and so they do not sell it even if I wanted a large quantity.
I spent some time researching ebay - but most (nearly all) sellers sell only tempered glass (which I don't want). The few seller that sell films are very expensive ($10+ vs. $1 for the tempered glass). That is also surprising as the cost of the film is much less...
So, my question to you all: who has tried film screen protectors? Where did you get it from and what experience did you have?
Thank you for sharing
I personally use 3MK Flexible glass - its hibrid glass. I use it from years, now on OP6. I think its the best option for any phone
https://folie-ochronne.3mk.pl/pl/p/OnePlus-6-Nietlukace-szklo-hybrydowe-3mk-FlexibleGlass/39482
I find this to be the pretty close and its an 8 pack.
https://www.amazon.com/gp/product/B07D1HNQSK/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
bamfsig45 said:
I find this to be the pretty close and its an 8 pack.
https://www.amazon.com/gp/product/B07D1HNQSK/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Just ordered me a set.
Im waiting for my iqshield to be delivered next week. Got some high hopes. Gave up on tgsps as there is none currently i would be happy about. Not even the original one.
I'm thinking of getting those from gadgetshieldz. do they ship door to door? or pass it into your local post office?
Abaddon said:
I'm thinking of getting those from gadgetshieldz. do they ship door to door? or pass it into your local post office?
Click to expand...
Click to collapse
Its Door to Door only. For me, they shipped within 2 days.
bamfsig45 said:
I find this to be the pretty close and its an 8 pack.
https://www.amazon.com/gp/product/B07D1HNQSK/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
How is the fit on those? Can you possibly snap a pic of it on your phone with a case on as well?
ajsmsg78 said:
How is the fit on those? Can you possibly snap a pic of it on your phone with a case on as well?
Click to expand...
Click to collapse
I don't have one installed at the moment, testing a G-Most TPG. But the fit is pretty precise, need patience to get it even on both sides. It's case friendly.
Z51 said:
Just ordered me a set.
Click to expand...
Click to collapse
Can you please do a quick review when you got it? Right now there is one positive and one negative review on Amazon - so sharing your experience would be very valuable! Thank you
Gadgetguy2005 said:
Can you please do a quick review when you got it? Right now there is one positive and one negative review on Amazon - so sharing your experience would be very valuable! Thank you
Click to expand...
Click to collapse
will do
Might grab some of these and see what they are like https://www.ebay.co.uk/itm/3-X-For-....TR1.TRC0.A0.H0.Xoneplus+6+full+coverage.TRS0
Gadgetguy2005 said:
Can you please do a quick review when you got it? Right now there is one positive and one negative review on Amazon - so sharing your experience would be very valuable! Thank you
Click to expand...
Click to collapse
I installed it. its a little bigger than I'd like. if it were maybe 1 cm smaller all around it would be perfect fit. im sure you can align this to fit correctly, but it leaves no room for error. ill try and get a pic.
Z51 said:
I installed it. its a little bigger than I'd like. if it were maybe 1 cm smaller all around it would be perfect fit. im sure you can align this to fit correctly, but it leaves no room for error. ill try and get a pic.
Click to expand...
Click to collapse
Hmm, thats not good. Is it equally too big each way or is it just difficult to install totally centered, so its big on one side only?
A pic would help for sure.
I finally found regular PET protectors similar to the OEM ones that fit the phone well and are of good quality. I got them from here:
https://www.ebay.com/itm/5X-Ultra-Thin-Tempered-Glass-PET-Soft-HD-Screen-Protector-Film-For-OnePlus-6/163161457336?ssPageName=STRK%3AMEBIDX%3AIT&var=462326426650&_trksid=p2060353.m2749.l2649
The adhesive is pretty sticky on them so they don't lift off but it's hard to get them perfectly bubble free. The way I get these on perfect every time is put rubbing alcohol all over the screen then apply the protector and set it in place exactly centered (it's easy to move because of the alcohol) Then lightly push down on it and very lightly push out some of the alcohol so you don't see any bubbles. Then wait five minutes and peel off the front layer then lightly with a small cloth push out the rest of the bubbles. When the alcohol dries (takes about 10-15 mins) it will adhere perfectly and there will be no residue, bubbles or dust under the protector.
I've got an IQshield on my OP6 http://www.iqshield.com/iq32368-oneplus-6-phone-screen-protector.html
I tried a few TG ones and wasn't happy with any. They either didn't stick properly or had the annoying black border. The IQshield is the best protector I've tried.
The best screen protector is the soft nano TPU protectors they sell at ebay or aliexpress for a buck a piece and these cover the whole screen and can be applied wet with some soap and water.
Aakash_Aaku said:
Does it cover the entire screen or leaves a gap at the edges?
Click to expand...
Click to collapse
I know why you are asking ...Most protectors don't cover the edges well. But this does .
I got this one:
OnePlus 6 Screen Protector, IQ Shield LiQuidSkin Full Coverage Screen Protector for OnePlus 6 HD Clear Anti-Bubble Film
From Amazon.
Accidentally dropped it on a concrete slab that had small gravel and dirt all over it about a week ago. Right out of my pocket. I do have one of those Tudia cases on it with a lip, HOWEVER some of that gravel did hit the glass. Tore up the screen protector in a couple spots. They kind of look like pin pricks but no discernible cracks or knicks in the glass what so ever, and the other scratches to the screen protector went away after rubbing with my fingers.
Talk about a freak out moment.
crberus81 said:
I got this one:
OnePlus 6 Screen Protector, IQ Shield LiQuidSkin Full Coverage Screen Protector for OnePlus 6 HD Clear Anti-Bubble Film
From Amazon.
Accidentally dropped it on a concrete slab that had small gravel and dirt all over it about a week ago. Right out of my pocket. I do have one of those Tudia cases on it with a lip, HOWEVER some of that gravel did hit the glass. Tore up the screen protector in a couple spots. They kind of look like pin pricks but no discernible cracks or knicks in the glass what so ever, and the other scratches to the screen protector went away after rubbing with my fingers.
Talk about a freak out moment.
Click to expand...
Click to collapse
How is the texture and clarity of the IQ? I got a Skinomi (with has a similar product description) and personally I was not happy with the stretchy texture and less-then-smooth feel when swiping. Also, it seemed to like clarity and almost had small "webs" when looking at it at certain angles. (not bubbles)
---------- Post added at 06:47 AM ---------- Previous post was at 06:42 AM ----------
crberus81 said:
I got this one:
OnePlus 6 Screen Protector, IQ Shield LiQuidSkin Full Coverage Screen Protector for OnePlus 6 HD Clear Anti-Bubble Film
From Amazon.
Accidentally dropped it on a concrete slab that had small gravel and dirt all over it about a week ago. Right out of my pocket. I do have one of those Tudia cases on it with a lip, HOWEVER some of that gravel did hit the glass. Tore up the screen protector in a couple spots. They kind of look like pin pricks but no discernible cracks or knicks in the glass what so ever, and the other scratches to the screen protector went away after rubbing with my fingers.
Talk about a freak out moment.
Click to expand...
Click to collapse
How is the texture and clarity of the IQ? I got a Skinomi (with has a similar product description) and personally I was not happy with the stretchy texture and less-then-smooth feel when swiping. Also, it seemed to like clarity and almost had small "webs" when looking at it at certain angles. (not bubbles)
So after seeing bad reviews of countless glass screen protectors, I have finally stumbled upon one that is actually fantastic and covers the entire display.
https://www.amazon.ca/ESR-Protector...2+tempered&dpPl=1&dpID=51kmkyd-p6L&ref=plSrch
I purchased this thing about a week ago and have so far been extremely satisfied. For starters it comes with a alignment tool that makes putting it on a breeze.
One benefit of this screen protector is that it is truly edge to edge, leaving about 0.75mm of space on each edge of the glass while simultaneously not cutting out any part of the display. The other benefit is that it has adhesive throughout the entire glass including the edges so no issues with the rainbow halo effect. The oleophobic coating on it is also superb. It feels EXACTLY like the original display, most glass screen protectors skimp out on this which leads them to feel a bit sticky but this one glides like the original display under it.
I installed it in under 3 minutes perfectly and there are absolutely no bubbles and the singular camera cutout is perfectly made in the correct spot. Hands down the best glass screen protector I've had for any smarthphone.
Thanks for the tip. I've ordered one on AliExpress from the same brand, costs only 5 usd
Using one for one month, just perfect and easy to apply. Very good quality and i have tried many screen protectors for mix 2 but none was as good as this one.
Vin87 said:
Thanks for the tip. I've ordered one on AliExpress from the same brand, costs only 5 usd
Click to expand...
Click to collapse
Can You add link to this screen protector? I serch but i find only to mi mix 2S. Thanks!
jankes13 said:
Can You add link to this screen protector? I serch but i find only to mi mix 2S. Thanks!
Click to expand...
Click to collapse
it is compatible with mix 2 too. and it's amazing, best one i've had
kostekzg said:
it is compatible with mix 2 too. and it's amazing, best one i've had
Click to expand...
Click to collapse
GREAT! Thanks for answer!
Hey.
I use my phone since early 2018 now.
After a few different screen protectors i gave up and use it without protector.
The phone is like a new one. I think the glass is very good and no protector is needed.
The display is very smooth to tap without one scratch on it.
Use it with full cover/case with magnetic closer.
I managed to get some hair-like fine scratches. I think your full cover helps a lot
I just shattered my ESR protector, you will never guess how. While pulling the phone out of my pocket, I somehow hooked the corner of my glass, right where the front camera is located ( here: https://imgur.com/F5Crawg ) with some loose thread in my pocket They should just make a round cutout :\
Just put mine on this morning, fits really well but 3 areas have a speck of dust under them, I put it on after getting out of the shower as the mist in the air normally keeps the dust away but not this time.
Got the esr case as well which is ok for the price.
Got them from the ESR store on AliExpress.
Sent from my Mi MIX 2 using Tapatalk
kostekzg said:
I just shattered my ESR protector, you will never guess how. While pulling the phone out of my pocket, I somehow hooked the corner of my glass, right where the front camera is located ( here: https://imgur.com/F5Crawg ) with some loose thread in my pocket They should just make a round cutout :\
Click to expand...
Click to collapse
Ruined 2 glass protector with that idiotic cut
Sent from my Mi MIX 2 using Tapatalk
Best screen protector I've ever had, and I think I've tried them all. Full glue so no weird effects, no dot matrix, perfect cut and perfect fit with the supplied tool. I'm highly impressed.
Tbh I can't understand why we need a camera cut out, just make a circular clear area.
Vin87 said:
Best screen protector I've ever had, and I think I've tried them all. Full glue so no weird effects, no dot matrix, perfect cut and perfect fit with the supplied tool. I'm highly impressed.
Tbh I can't understand why we need a camera cut out, just make a circular clear area.
Click to expand...
Click to collapse
ESR? The one in the OP?
Miso122 said:
ESR? The one in the OP?
Click to expand...
Click to collapse
Yes the ESR from the Op. I got mine from AliExpress
Vin87 said:
Yes the ESR from the Op. I got mine from AliExpress
Click to expand...
Click to collapse
thanks, got mine on plane rn
crzykiller said:
So after seeing bad reviews of countless glass screen protectors, I have finally stumbled upon one that is actually fantastic and covers the entire display.
https://www.amazon.ca/ESR-Protector...2+tempered&dpPl=1&dpID=51kmkyd-p6L&ref=plSrch
I purchased this thing about a week ago and have so far been extremely satisfied. For starters it comes with a alignment tool that makes putting it on a breeze.
One benefit of this screen protector is that it is truly edge to edge, leaving about 0.75mm of space on each edge of the glass while simultaneously not cutting out any part of the display. The other benefit is that it has adhesive throughout the entire glass including the edges so no issues with the rainbow halo effect. The oleophobic coating on it is also superb. It feels EXACTLY like the original display, most glass screen protectors skimp out on this which leads them to feel a bit sticky but this one glides like the original display under it.
I installed it in under 3 minutes perfectly and there are absolutely no bubbles and the singular camera cutout is perfectly made in the correct spot. Hands down the best glass screen protector I've had for any smarthphone.
Click to expand...
Click to collapse
There is a white frame and black frame available. Which one did you choose? . . . and is there a case that would be most compatible with this rounded edge protector?
ESR
Well, ESR glasss has the best oleofobic coating and clearness. No rainbow efect too, it has gule on the whole surface. Just that nowel plastic frame needs some practice to get use to it. There are no gaps between it and the glass on all sides , when install. The glue is really strong. I am siprised that somebody managed to stisck something between glass and screen.
My ESR protector died after a couple months of use. First some scratches appeared (the protector is softer than the screen) and on one of those scratches (a deeper one on the edge) the protector cracked. Removal was not that easy as the force required to pull it of will result in a shattered protector everywhere so expect lots of glass dust. I've ordered a new one together with a ESR case (that fits lovely too). These things are so cheap anyway that I don't mind going through a couple of them each year.
Just got the ESR case and screen protector. Thanks for the recommendation, this screen protector feels and looks like there is no protector at all, no more smudges over the original screen. The perfect application from the bracket and adhesive across the entire protector makes it the best one I've used, after giving up on covering my mix 2 after 3-4 different protectors giving neuton rings and immediately thrown out. I have probably dropped my mix 2 on the pavement 7 or 8 times in the last year getting out of my car, and only got a tiny crack on the bottom bezel corner of the screen. Since the bottom bezel on the ESR protector is black my phone looks undamaged now.
The ESR case is nearly as good as the one in the box. I do notice it's slightly thicker than the case in the box, and the added bottom protection makes the phone slightly longer, but it's overall an exceptional fit.
I got mine from taobao directly.
https://detail.tmall.com/item.htm?id=544415913057&spm=a1z09.2.0.0.1be12e8dZtBmgW&_u=i23vb00o11c6
3-protector for 39 CNY, with a free silicon case (very ****ty).
This protector have soft edges to fit the curved screen edge, perfect for my case.
Planning to get the Redmi K20 Pro but would like to keep it minimal in terms of protection. Just need some scratch protection.
Seen Gadgetshieldz full body screen protector as one of the recommendations.
https://www.gadgetshieldz.com/xiaomi-redmi-k20-pro-screen-protector-guards.html
Anything else that can be used without adding much bulk just for scratch protection? Don't want to hide those lovely patterns on the k20 back.
You should be able to use any screen protector for the Mi Mix 3 we they have the same screen size.
saiarnav said:
I didn't find anything like body protectors like gadgetshieldz.
Click to expand...
Click to collapse
Have you seen or tried the Mobile Outfitters films for front, back or whole size?
So I recently got my Mi 9T pro and found this thread while looking for a screen protector.
Has anyone tried the linked one from gadgetshieldz? If yes, good experiences? Does it cover the complete screen? I really can't stand the glass protectors which leave like 2mm of the screen on each side completely uncovered...
ChrisM243 said:
So I recently got my Mi 9T pro and found this thread while looking for a screen protector.
Has anyone tried the linked one from gadgetshieldz? If yes, good experiences? Does it cover the complete screen? I really can't stand the glass protectors which leave like 2mm of the screen on each side completely uncovered...
Click to expand...
Click to collapse
I'm using the ID glass from ringke full display protection a bit pricey though
Some one here having a problem with their tempered glass and their vasr?
Thank you
I mean their case.
Anton_Chigurh said:
Have you seen or tried the Mobile Outfitters films for front, back or whole size?
Click to expand...
Click to collapse
No
bought Glazedinc screen protector.. its hard and solid. covered every side.
I am using The Ringke Red Case, along with a generic Hydragel screen Protector from AliExpress (₹65). Till now my phone has had atleast 6-7 falls of which 2 were serious enough to stop the heart but zero bumps or cracks...
I haven't felt the need for over priced screen protectors from Glazedinc or anyone else...
Previously i used to use S-sheildz (Origin of GadetshieldZ from USA). Had to use water to apply the film but it was good enough that in my 7+ years of using them never had a screen scratch.... Or crack.. But can't find a source anymore. And Don't want pay more then 200 per screen guard....
maddy143ded said:
I am using The Ringke Red Case, along with a generic Hydragel screen Protector from AliExpress (₹65). Till now my phone has had atleast 6-7 falls of which 2 were serious enough to stop the heart but zero bumps or cracks...
I haven't felt the need for over priced screen protectors from Glazedinc or anyone else...
Previously i used to use S-sheildz (Origin of GadetshieldZ from USA). Had to use water to apply the film but it was good enough that in my 7+ years of using them never had a screen scratch.... Or crack.. But can't find a source anymore. And Don't want pay more then 200 per screen guard....
Click to expand...
Click to collapse
once the Hydragel screen protector is applied, can that be removed .. when we dont want it..
I am using a nillkin screen protector 0.33mm without the black edges. Fits perfect without any bubbles or ring effect. So far the best screen protector for this phone if you want a glass screen protector. It has good olephobic coating so it's smooth and because I got the 0.33mm version they don't crack easily.
Where did you buy that? I have Nillkin tempered glass screen 0.2mm from Amazon India. It doesn't cover the whole screen. It doesn't even cover the display area completely. It also has halo around the edges even though I went to mobile phone store and asked them to apply the screen protector.
This is in fact my 3rd screen protector. I applied 2 others - one which had black edge which covered part of the display, and second one without black edges which also didn't cover the entire display.
I've also bought a set of 2 from GearBest, but I haven't applied it as it's the same size as the Nillkin one.
2 more on the way from Aliexpress, but I'm not too hopeful about them either. I don't want to take chance with another Nillkin, but you've found one that covers the entire screen and the edges stick properly as well, then I'd like to try it.
thexplode7 said:
I am using a nillkin screen protector 0.33mm without the black edges. Fits perfect without any bubbles or ring effect. So far the best screen protector for this phone if you want a glass screen protector. It has good olephobic coating so it's smooth and because I got the 0.33mm version they don't crack easily.
Click to expand...
Click to collapse
nandakis4 said:
once the Hydragel screen protector is applied, can that be removed .. when we dont want it..
Click to expand...
Click to collapse
Oh easily,,, It's just some kind of plastic+rubber film that is preventing any scratches on my screen... Should offer enough protection from breaks also...
I'm using Clearplex on the screen with this phone. Is awesome. The case in the box is nice but not very strong, it's breaking in corners without getting hit or fallen.
I ordered hydrogel back film (Im waiting for it from Aliexpress) and a Nillkin transparent cover to have a couple of options.
Does transparent Nillkin cover get yellowish after a couple of months?
Sent from my Mi 9T Pro using Tapatalk
Glazedinc
Can you tell me if it has the black borders?
nandakis4 said:
bought Glazedinc screen protector.. its hard and solid. covered every side.
Click to expand...
Click to collapse
scarmage said:
Can you tell me if it has the black borders?
Click to expand...
Click to collapse
Yes it has black borders
Sent from my Redmi K20 Pro using XDA Labs
I have hydrogel AND Nillkin 2.5D double protection.
Sent from my Redmi K20 Pro using Tapatalk
Hey guys and gals,
Has anybody tried a frosted/matte/anti-glare screen protector with the 9T PRO/K20 Pro? Which one?
Have you noticed any changes with the performance of the fingerprint sensor?
Thanks!
maddy143ded said:
I am using The Ringke Red Case, along with a generic Hydragel screen Protector from AliExpress (₹65). Till now my phone has had atleast 6-7 falls of which 2 were serious enough to stop the heart but zero bumps or cracks...
I haven't felt the need for over priced screen protectors from Glazedinc or anyone else...
Previously i used to use S-sheildz (Origin of GadetshieldZ from USA). Had to use water to apply the film but it was good enough that in my 7+ years of using them never had a screen scratch.... Or crack.. But can't find a source anymore. And Don't want pay more then 200 per screen guard....
Click to expand...
Click to collapse
Which Hydrogel link?
scarmage said:
Where did you buy that? I have Nillkin tempered glass screen 0.2mm from Amazon India. It doesn't cover the whole screen. It doesn't even cover the display area completely. It also has halo around the edges even though I went to mobile phone store and asked them to apply the screen protector.
This is in fact my 3rd screen protector. I applied 2 others - one which had black edge which covered part of the display, and second one without black edges which also didn't cover the entire display.
I've also bought a set of 2 from GearBest, but I haven't applied it as it's the same size as the Nillkin one.
2 more on the way from Aliexpress, but I'm not too hopeful about them either. I don't want to take chance with another Nillkin, but you've found one that covers the entire screen and the edges stick properly as well, then I'd like to try it.
Click to expand...
Click to collapse
Hmm I bought in lazada which is like aliexpress but for my country the 0.33mm one doesn't breakf easily and I understand what you mean by not fitting fully it does have like a gap of few cm of the edges. But a case solves this. I am using spoken case btw. it doesn't have the rainbow effect though. When I got it and install I just push the bubbles out from the side the rainbow effect is gone. Idk maybe different place they use different kind of glass. I am using Redmi k20 pro btw