Related
So, I got my new OnePlus One today and I tried to get CM12 onto it. I was following the [GUIDE] How to Install CM12 on the OnePlus One- Android Lollipop/5.0 on the OPO forums, and everything went well until I tried to get the TWRP on there. I flashed the recovery and rebooted the phone. I turned it off and then tried to boot it into recovery but it doesn't, it just hangs at the OPO logo until I hard-restart it.
I've tried factory resetting it and doing
fastboot oem unlock
but nothing happened. The factory reset pretty much just reset the phone. I think I might've messed up the kernel. How do I fix it?
EDIT 1: I've tried reflashing twrp recoveries and nothing. When I hold power+volume down, it powers on, shows the one plus logo, then reboots and just goes to the lockscreen.
UPDATE 1: I managed to manually flash all the CM12 files and use lollipop. I haven't tried the recovery yet but I'll keep you guys updated (if any of you even care).
UPDATE 2: Apparently flashing CM12 made the recovery work. Everything works as it should and the OTA to the most recent CM12 worked perfectly.
You're probably doing the button combo wrong. Hold volume down, then hold power (so you're holding them together), when you see the boot logo let go of power but keep holding volume down until you reach recovery.
Heisenberg said:
You're probably doing the button combo wrong. Hold volume down, then hold power (so you're holding them together), when you see the boot logo let go of power but keep holding volume down until you reach recovery.
Click to expand...
Click to collapse
I was curios and enabled advanced reboot to try and boot into recovery and it worked (after I had flashed CM12). Everything's working now.
SDCore said:
UPDATE 1: I managed to manually flash all the CM12 files and use lollipop. I haven't tried the recovery yet but I'll keep you guys updated (if any of you even care).
Click to expand...
Click to collapse
How did you manually flash CM12? I think I'm having the same trouble you were having. I used the oneplus toolbox from the forum to unlock the bootloader, then flash the TWRP, but no luck in getting into recovery mode. It just boot loops with the oneplus logo until I release the volume down button at which point it then boots to the lock screen.
Heisenberg said:
You're probably doing the button combo wrong. Hold volume down, then hold power (so you're holding them together), when you see the boot logo let go of power but keep holding volume down until you reach recovery.
Click to expand...
Click to collapse
@Heisenberg I'm also having trouble getting into recovery. I've tried the different button combos (power + vol down; power + vol down and release power) as well as the advance reboot options to get into recovery, but they all fail. I get the 1+ logo and after I let go of the volume down button the screen goes black and boots again to the 1+ screen and then to the lockscreen. It's almost like it doesn't recognize the recovery. I tried putting the stock recovery back on using the image in the OnePlus One toolkit folder, but that one doesn't work either. In addition to unchecking the "CM Recovery Update", are there any other settings that could be causing problems?
For background info, I initially used the toolkit interface to unlock the bootloader and then flash the recovery. The bootloader unlocked with no issue...it wiped my device and I was in sync with the "How to root" video posted by alex.inthi. I got sidetracked after the (seemingly) successful flash of TWRP onto the phone I kept getting booted into the Cyanogen recovery. I realized out that I needed to uncheck the setting to keep it from overwriting TWRP and after that was not able to boot into recovery. After finding your beginners guide (thanks, by the way, very well written) I tried using fastboot from the command line as you show, but still no luck.
Thanks in advance for any help...
bellino13 said:
I used the oneplus toolbox from the forum to unlock the bootloader, then flash the TWRP, but no luck in getting into recovery mode. It just boot loops with the oneplus logo until I release the volume down button at which point it then boots to the lock screen.
Click to expand...
Click to collapse
bellino13 said:
@Heisenberg I'm also having trouble getting into recovery. I've tried the different button combos (power + vol down; power + vol down and release power) as well as the advance reboot options to get into recovery, but they all fail. I get the 1+ logo and after I let go of the volume down button the screen goes black and boots again to the 1+ screen and then to the lockscreen. It's almost like it doesn't recognize the recovery. I tried putting the stock recovery back on using the image in the OnePlus One toolkit folder, but that one doesn't work either. In addition to unchecking the "CM Recovery Update", are there any other settings that could be causing problems?
For background info, I initially used the toolkit interface to unlock the bootloader and then flash the recovery. The bootloader unlocked with no issue...it wiped my device and I was in sync with the "How to root" video posted by alex.inthi. I got sidetracked after the (seemingly) successful flash of TWRP onto the phone I kept getting booted into the Cyanogen recovery. I realized out that I needed to uncheck the setting to keep it from overwriting TWRP and after that was not able to boot into recovery. After finding your beginners guide (thanks, by the way, very well written) I tried using fastboot from the command line as you show, but still no luck.
Click to expand...
Click to collapse
Okay, I must have been having a special kind of moment - I've got TWRP 2.8.7.0 running on my handset now. I may have been holding the volume down button too long, or it may be that I was using an older version of TWRP, but I'm going to go with the former. I've also been able to successfully flash and boot into Philz 6.59.2
Having the same problem
I am having the exact same problem and cannot seem to find a solution. Recovery screen just doesn't appear, but goes to lockscreen.
Tried erasing, flashing both twrp, philz etc., but nothing works. The phone doesn't recognize the recovery status. Advanced booting does the same.
Update CM-recovery is checked off, phone is unlocked. I've followed every step of the big guide down to every detail.
Is manually flashing the 12.1 ROM the only way and in that case: is it hard for a relative newcomer?
I have searched around but cannot find a solution. I can't seem to get a working recovery after flashing stock images with and without TWRP 2.8.7.1.
I followed these steps to upgrade to Android 6.0 after verifying the md5 checksum of my download:
adb reboot bootloader
fastboot flash bootloader bootloader-hammerhead....img [it looks the same as before, but I did it anyway]
reboot bootloader
fastboot flash radio radio-hammerhead....img
reboot bootloader
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
....I have also tried with and without flashing cache
fastboot reboot
...then I go back into the bootloader and try to access recovery, but I only get the dead android with the red triangle.
Is anyone else having this problem? Does anyone have a suggestion for a fix?
I'm having the same problem with my Nexus 7 (2013).
Hold down the Power button and press Volume Up.
slackhouse said:
Hold down the Power button and press Volume Up.
Click to expand...
Click to collapse
When I see the dead android? When the phone is off? When the phone is booted into the system?
The dead Android means you have stock recovery installed. When you see the dead Android, hold down the power button and push the volume up then release and you will receive the stock recovery menu
funnel71 said:
The dead Android means you have stock recovery installed. When you see the dead Android, hold down the power button and push the volume up then release and you will receive the stock recovery menu
Click to expand...
Click to collapse
Thanks for the description, but it didn't work. If I hold those buttons long enough, it just loops on the "Google" screen, and if I let go, it boots into the system.
After flashing other times, I have been able to either get the recovery menu or enter TWRP when I choose Recovery from the bootloader menu. Not this time though.
Well, I re-extracted the recovery.img file and flashed it - same problem. I decided to try flashing TWRP again. After flashing I rebooted the bootloader (probably not necessary), then chose Recovery and it booted TWRP like I normally expect.
Still not sure what is happening with the stock recovery. For now I don't have to worry - I'm getting my backup.
Sometimes it doesn't work right away, I keep switching between the volume buttons and it eventually pops up. Only need to tap the volume key, no need to hold it when at the dead Android.
Good luck
treefrog321 said:
Well, I re-extracted the recovery.img file and flashed it - same problem. I decided to try flashing TWRP again. After flashing I rebooted the bootloader (probably not necessary), then chose Recovery and it booted TWRP like I normally expect.
Still not sure what is happening with the stock recovery. For now I don't have to worry - I'm getting my backup.
Click to expand...
Click to collapse
Getting into stock recovery from the dead android can be very tricky. As stated above, from the dead android screen, you want to hold the Power Button and press Volume Up quickly, then release. It sounds like you are holding the Power Button way too long which is causing it to do a reboot. I had the same issue the first few times.
Below is a video of someone doing it. On the video, he says to press volume up, volume down, and the power button at the same time until the recovery menu works. But, it is just the power button and volume up. The video will just show you how quickly to press the button combination.
https://youtu.be/DRp5jJO34PE?t=471
I don't recall having any difficulty in the past, but I think I get it now. Thanks for the tips guys.
I am unable to install TWRP over the huawei eRecovery.
>I first unlocked the bootloader by using fastboot OEM command
>then installed TWRP. Tried all the versions that i found for mate 8. I get a message "OKAY"
> Then I get a message saying that I have to press the up vol button to go to recovery. And when I try to go to the recovery window I see Huwaei's recovery and not TWRP. I cant use TWRP manager for this as it will not work until I have rooted my phone. SuperSu through playstore does not work. How will I proceed with rooting and installing TWRP. I am stuck !!
Is there any application like ODIN for huawei? That always worked, no matter what went wrong. Please help!!!!!!
I guess I am using the international version
ure going about this all wrong mate
as already explained in the other thread, u cant enter twrp that way. if u press power up in the start screen ull always end up in the erecovery, no matter which regular recovery u have flashed.
easiest way to enter regular recovery is to install flashify from the playstore and choose to reboot phone into recovery
Sent from my Huawei Mate 8 NXT-AL10 using Tapatalk
cheth20 said:
I am unable to install TWRP over the huawei eRecovery.
>I first unlocked the bootloader by using fastboot OEM command
>then installed TWRP. Tried all the versions that i found for mate 8. I get a message "OKAY"
> Then I get a message saying that I have to press the up vol button to go to recovery. And when I try to go to the recovery window I see Huwaei's recovery and not TWRP. I cant use TWRP manager for this as it will not work until I have rooted my phone. SuperSu through playstore does not work. How will I proceed with rooting and installing TWRP. I am stuck !!
Is there any application like ODIN for huawei? That always worked, no matter what went wrong. Please help!!!!!!
I guess I am using the international version
Click to expand...
Click to collapse
When the phone is off, hold on the volume + & power button at the same time. When the screen flashes on, quickly remove your fingers from the said key presses and it should boot into twrp. If you hold them too long it will boot into erecovery. If you want to reboot into twrp recovery when the phone is already on, then you will have to get an app like quick reboot or flash a Rom which has that option.
Sent from my NEXT using Tapatalk
tdamocles said:
When the phone is off, hold on the volume + & power button at the same time. When the screen flashes on, quickly remove your fingers from the said key presses and it should boot into twrp.
Click to expand...
Click to collapse
This.
Power plus volume down does nothing, TWRP-wise. However that is whta's being said to press in 99% of the threads/tutorials.
Took me HOURS and countless re-flashing of TWRP to figure this out myself. (the up *plus* down thingy). Really annoying.
tdamocles said:
When the phone is off, hold on the volume + & power button at the same time. When the screen flashes on, quickly remove your fingers from the said key presses and it should boot into twrp. If you hold them too long it will boot into erecovery. If you want to reboot into twrp recovery when the phone is already on, then you will have to get an app like quick reboot or flash a Rom which has that option.
Sent from my NEXT using Tapatalk
Click to expand...
Click to collapse
Thanks a ton! this worked
cheth20 said:
I am unable to install TWRP over the huawei eRecovery.
>I first unlocked the bootloader by using fastboot OEM command
>then installed TWRP. Tried all the versions that i found for mate 8. I get a message "OKAY"
> Then I get a message saying that I have to press the up vol button to go to recovery. And when I try to go to the recovery window I see Huwaei's recovery and not TWRP. I cant use TWRP manager for this as it will not work until I have rooted my phone. SuperSu through playstore does not work. How will I proceed with rooting and installing TWRP. I am stuck !!
Is there any application like ODIN for huawei? That always worked, no matter what went wrong. Please help!!!!!!
I guess I am using the international version
Click to expand...
Click to collapse
Well, I have a question. What is the eRecovery, because I've seen this screen also and I dont know what it does. Also, there are three options in it: download latest version and recovery, reboot and shutdown. So if I press download latest version and recovery what will happen? Because I'm actually looking for a way to get off TWRP without having to lose any data (I want to install the latest OTA, but I've seen that TWRP doesn't support well those, and I don't want to mess up my phone)...
Please help!
easy: download a stock rom identical to your current version, extract recovery partition using the huawei app extractor from the rom's update.app file and then flash that through fastboot
and since u probably have no idea what im talking about, i suggest u use google and xda search functions before asking any further questions here dont be lazy and expect everyone to work for you and serve everything on a silver platter, do your due diligence!
Sent from my Huawei Mate 8 NXT-AL10
Hi, simply press Volume up an down at same time when device is powering up...and hold it, until Twrp logo is on the screen. Works always for me.
Greets Tobias
OMGiidiness
Guys, volume-up+power goes to recovery
Volume-down+power goes to fastboot or bootloader
bluheart said:
OMGiidiness
Guys, volume-up+power goes to recovery
Volume-down+power goes to fastboot or bootloader
Click to expand...
Click to collapse
And just for the complete list:
Volume up + power AND USB plugged in goes into eRecovery (or TWRP, if you flashed TWRP to RECOVERY2 instead to RECOVERY)
Volume up and down + power and USB plugged in forces update via USB (indicated by a little USB-like icon in the recovery circle. The progess bar goes to 5% and waits for input from your PC)
True, when usb is attached
tdamocles said:
When the phone is off, hold on the volume + & power button at the same time. When the screen flashes on, quickly remove your fingers from the said key presses and it should boot into twrp. If you hold them too long it will boot into erecovery. If you want to reboot into twrp recovery when the phone is already on, then you will have to get an app like quick reboot or flash a Rom which has that option.
Click to expand...
Click to collapse
I can attest to this, i flashed twrp many times thinking it was not working beacause i am used to the mate 7 holding volume up + power long enough boots into recovery (twrp) but this won't work on mate 8
sibiyav1486 said:
I can attest to this, i flashed twrp many times thinking it was not working beacause i am used to the mate 7 holding volume up + power long enough boots into recovery (twrp) but this won't work on mate 8
Click to expand...
Click to collapse
Works just fine.
Work like a charm
cheth20 said:
Thanks a ton! this worked
Click to expand...
Click to collapse
Work like a charm ...
Same to me
I see same this problem from my Honor 6X Pakistani version
installed twrp in my ,honor 5c,,,but cant get to the recovery,,tried every version of u tip,guys,,,what to do,,,,?
I have same problem, in theory i have TWRP as recovery but when star entry in eRecovery .... help
tdamocles said:
When the phone is off, hold on the volume + & power button at the same time. When the screen flashes on, quickly remove your fingers from the said key presses and it should boot into twrp. If you hold them too long it will boot into erecovery. If you want to reboot into twrp recovery when the phone is already on, then you will have to get an app like quick reboot or flash a Rom which has that option.
Sent from my NEXT using Tapatalk
Click to expand...
Click to collapse
Thanks mate it worked out perfectly.
to come to twrp hold on the volume+ and volume- works on mine P10
Not able to get into TWRP recovery, stuck on "Your device is booting now..."
Hey everyone,
I just unlocked my bootloader and now want to flash TWRP and SuperSU. My Phone is already Nougat with Emui 5.
The Problem is that I'm just not able to enter the recovery. When pressing volume down + power or trying "adb reboot recovery" in the command line, the phone starts in the "unlocked bootloader warning screen". But not like in the normal warning screen it doesn't give me options but just shows a white line saying "Your device is booting now..." and thats where it gets stuck. Only gets hotter...
The fun thing is I already was in the recovery but wasn't able to flash the SuperSU (r275). Maybe it was not compatible with Nougat. TWRP just couldn't mount various things. After reflashing the recovery below instead of some other version (don't know anymore) I'm not able to enter the recovery again.
Feels like I searched the whole Internet and there is nearly nobody with the problem or a solution. Tried this as well: https://forum.xda-developers.com/honor-8/help/honor-8-boot-to-twrp-recovery-lost-root-t3567462. It seems like nobody who published a Honor 8 + Nougat + TWRP + SuperSU "How To" acutally tried it himself.
I used this TWRP https://forum.xda-developers.com/honor-8/development/twrp-t3566563
Please help me I can't use WhatsApp because I need to restore it with Titanium (Database way doesn't restore all chats... Other problem)
Thanks everybody I just can't stand this anymore
I had this issue after downgrading to EMUI 4.1 and upgrading to 5.0 again via twrp. I flashed some old 3.0.2.0 version from another developer. Booted into that, flashed the update.zip package for emui 5.0 and then i was able to successfully flash and boot into 3.1.1.0
sysak said:
I had this issue after downgrading to EMUI 4.1 and upgrading to 5.0 again via twrp. I flashed some old 3.0.2.0 version from another developer. Booted into that, flashed the update.zip package for emui 5.0 and then i was able to successfully flash and boot into 3.1.1.0
Click to expand...
Click to collapse
Thank you I got it!
So I got my L09 with Nougat/Emui 5 on it. Then just used TWRP from https://forum.xda-developers.com/showpost.php?p=70228949&postcount=252 (bootable, think ist ist 3.0.2.0) then flashed 3.1.1.0 from https://forum.xda-developers.com/honor-8/development/twrp-t3566563 (bootable) and finally flashed SuperSu from first Link again. Other SuperSU versions (like the phh r275) WERE NOT flashable.
Magisk is the most compatible root solution for the Honor 8 on Nougat. The only thing that doesn't work (seamlessly) is MagiskHide, but the root itself works and flashes fine from TWRP.
I have tried to flash twrp multiple times to no success. I have tried multiple variations of the tool but for some reason when I go try to boot into recovery it takes me to erecovery which fails to do anything.
Are you sure about button combination
If you're trying to boot in to recovery with your phone plugged in to the computer it will także you to erecovery. If only i could find the person who całe up with this stupid idea that caused me hours of struggles, they'd pay for it. also when you use the pwr + vol.down combination let go off the power when you feel the vibration and further hold the vol.down until you see the boot screen appear.
sysak said:
If you're trying to boot in to recovery with your phone plugged in to the computer it will także you to erecovery. If only i could find the person who całe up with this stupid idea that caused me hours of struggles, they'd pay for it. also when you use the pwr + vol.down combination let go off the power when you feel the vibration and further hold the vol.down until you see the boot screen appear.
Click to expand...
Click to collapse
OK so i go to bootloader flash twrp then when i try to reboot ive tried disconnecting from computer and holding vol up and power then when it vibrates release power and hold vol down too. It still just boots to unlocked bootloader screen then to os
Dalg1991 said:
OK so i go to bootloader flash twrp then when i try to reboot ive tried disconnecting from computer and holding vol up and power then when it vibrates release power and hold vol down too. It still just boots to unlocked bootloader screen then to os
Click to expand...
Click to collapse
Try adb reboot recovery in command line on your PC when phone is turned on
0mrwhatsupguy0 said:
Try adb reboot recovery in command line on your PC when phone is turned on
Click to expand...
Click to collapse
I tried this like 20 times but this time it worked! I know have TWRP working. weird think tho is that no keyboard or default Huawei apps are preinstalled and BT isn't working.
Few problems with Binary SU and BusyBox
My phone seems to be rooted. Titanium Backup works but I have to accept every App instalation manually. With other settings restoring gets stuck. Also SuperSU reminds me every time that my BinarySU needs an actualisation but fails if it tries. And finally BusyBox just isn't able to get itself installed.
I'm thinking about restoring stock firmware, update to Nougat, and flash the two TWRP Versions and SuperSU again but hate to spend ours on my phone. OnePlus One rooting was sooo easy...
Dalg1991 said:
I tried this like 20 times but this time it worked! I know have TWRP working. weird think tho is that no keyboard or default Huawei apps are preinstalled and BT isn't working.
Click to expand...
Click to collapse
Is there a number of times you have to do it? How should I transition from this stupid "Your device is an enemy of the state" screen to something that will connect to adb?
I've been trying to flash TWRP onto my Galaxy S3 and my Galaxy S9 for a few days now, and every time I try to do so, it flashes successfully, but then boots into stock Samsung recovery when entering recovery mode. I've used Odin on Windows and Heimdall on Linux, but both have the same issue. I tried different versions of TWRP as well.
If it helps, I'm pretty sure both phones are OEM unlocked. The S9 has the option in developer options, and says it it unlocked in download mode. The S3 doesn't have any option for this, and doesn't say anything in download mode about it.
Even though the S3 might not be OEM unlocked, it still doesn't explain the issue with the S9.
I'm also dual booting, so all attempts were from the same computer. It might be some issue with my computer, but I really don't have access to another one right now, so I was wondering if anyone had any other ideas or thoughts on the issue. Any help would be appreciated.
Did you check this?
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
Click to expand...
Click to collapse
https://twrp.me/samsung/samsunggalaxys3internationalexynos.html
I think for S3 it's
Vol up + Home + Power
Basically:
1. Flashing
2. Reboot into Recovery by keep pressing Vol up + Home + Power
3. Allow TWRP to become permanent
Perhaps you want to check/re-ask here as well:
https://forum.xda-developers.com/c/samsung-galaxy-s-iii-i9300-i9305.1563/
SigmundDroid said:
Did you check this?
https://twrp.me/samsung/samsunggalaxys3internationalexynos.html
I think for S3 it's
Vol up + Home + Power
Basically:
1. Flashing
2. Reboot into Recovery by keep pressing Vol up + Home + Power
3. Allow TWRP to become permanent
Perhaps you want to check/re-ask here as well:
https://forum.xda-developers.com/c/samsung-galaxy-s-iii-i9300-i9305.1563/
Click to expand...
Click to collapse
Holding the given buttons just brings me to default recovery, so I'm not sure what the proper recovery is. I've also tried Volume Up + Down + Home + Power.
Hmm, didn't flash an S3 for quite some time but I vaguely remember that I had similar problems during
"After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted"
and often missed or was too clumsy, too late or both
Would in fastboot the command
fastboot reboot recovery
work for you? Or does it still end up in stock recovery?
Perhaps it's really time to check in the s3 threads for further advice?
SigmundDroid said:
Hmm, didn't flash an S3 for quite some time but I vaguely remember that I had similar problems during
"After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted"
and often missed or was too clumsy, too late or both
Would in fastboot the command
fastboot reboot recovery
work for you? Or does it still end up in stock recovery?
Perhaps it's really time to check in the s3 threads for further advice?
Click to expand...
Click to collapse
Okay so turns out I needed to boot into recovery immediately after flashing TWRP on both phones because when booting into the system, the recovery is replaced. After doing this, everything worked fine and I was able to get custom ROMs working! I appreciate your help though