Database Info

[Q] Recovery help

Ok, I have tried google and search and can't get any help, I can't access the recovery on a xt926, it is rooted and unlocked on 4.4.2 but I can't get it to load from the PWR/ VOL UP menu immediately after flashing either twrp, or cwm. when I try to use fastboot to flash the recovery I get told that the variable is not supported but then it continues with flashing and says it's complete but obviously doesn't work.
Any ideas?

I have an XT925. I got the latest DROID_RAZR_HD_Utility_1.41. Used that included TWRP 2.7.1.0 specifically for the XT 925.
Make sure you have the most recent drivers for your PC to recognize the XT925.
Boot to fastboot.
Connect the phone and make sure it is recognized.
Flash into the recovery partition the above TWRP.
yes, I also received the 'variable not supported' message. But the flash does confirm completion.
Once the flash is completed, unplug the phone. Then a quick press and release of the power switch to turn off. Once off, use simultaneous power and Volume+- press to get into boot menu. From there, select Recovery option and you should get into TWRP.
This worked for me after I thought I had completely bricked my XT925.
Cheers

Latheman said:
Ok, I have tried google and search and can't get any help, I can't access the recovery on a xt926, it is rooted and unlocked on 4.4.2 but I can't get it to load from the PWR/ VOL UP menu immediately after flashing either twrp, or cwm. when I try to use fastboot to flash the recovery I get told that the variable is not supported but then it continues with flashing and says it's complete but obviously doesn't work.
Any ideas?
Click to expand...
Click to collapse
Power phone off and press volume up, down, and power buttons simultaneously and hold them until you see white text with boot options. Scroll down to recovery and press vol up. Of thia still doesn't work, then you may be flashing a bad recovery image.

Thanks guys, I already got it fixed, I used flashify and it worked great.

[Q] Can't boot into recovery?

So, I got my new OnePlus One today and I tried to get CM12 onto it. I was following the [GUIDE] How to Install CM12 on the OnePlus One- Android Lollipop/5.0 on the OPO forums, and everything went well until I tried to get the TWRP on there. I flashed the recovery and rebooted the phone. I turned it off and then tried to boot it into recovery but it doesn't, it just hangs at the OPO logo until I hard-restart it.
I've tried factory resetting it and doing
fastboot oem unlock
but nothing happened. The factory reset pretty much just reset the phone. I think I might've messed up the kernel. How do I fix it?
EDIT 1: I've tried reflashing twrp recoveries and nothing. When I hold power+volume down, it powers on, shows the one plus logo, then reboots and just goes to the lockscreen.
UPDATE 1: I managed to manually flash all the CM12 files and use lollipop. I haven't tried the recovery yet but I'll keep you guys updated (if any of you even care).
UPDATE 2: Apparently flashing CM12 made the recovery work. Everything works as it should and the OTA to the most recent CM12 worked perfectly.

You're probably doing the button combo wrong. Hold volume down, then hold power (so you're holding them together), when you see the boot logo let go of power but keep holding volume down until you reach recovery.

Heisenberg said:
You're probably doing the button combo wrong. Hold volume down, then hold power (so you're holding them together), when you see the boot logo let go of power but keep holding volume down until you reach recovery.
Click to expand...
Click to collapse
I was curios and enabled advanced reboot to try and boot into recovery and it worked (after I had flashed CM12). Everything's working now.

SDCore said:
UPDATE 1: I managed to manually flash all the CM12 files and use lollipop. I haven't tried the recovery yet but I'll keep you guys updated (if any of you even care).
Click to expand...
Click to collapse
How did you manually flash CM12? I think I'm having the same trouble you were having. I used the oneplus toolbox from the forum to unlock the bootloader, then flash the TWRP, but no luck in getting into recovery mode. It just boot loops with the oneplus logo until I release the volume down button at which point it then boots to the lock screen.

Heisenberg said:
You're probably doing the button combo wrong. Hold volume down, then hold power (so you're holding them together), when you see the boot logo let go of power but keep holding volume down until you reach recovery.
Click to expand...
Click to collapse
@Heisenberg I'm also having trouble getting into recovery. I've tried the different button combos (power + vol down; power + vol down and release power) as well as the advance reboot options to get into recovery, but they all fail. I get the 1+ logo and after I let go of the volume down button the screen goes black and boots again to the 1+ screen and then to the lockscreen. It's almost like it doesn't recognize the recovery. I tried putting the stock recovery back on using the image in the OnePlus One toolkit folder, but that one doesn't work either. In addition to unchecking the "CM Recovery Update", are there any other settings that could be causing problems?
For background info, I initially used the toolkit interface to unlock the bootloader and then flash the recovery. The bootloader unlocked with no issue...it wiped my device and I was in sync with the "How to root" video posted by alex.inthi. I got sidetracked after the (seemingly) successful flash of TWRP onto the phone I kept getting booted into the Cyanogen recovery. I realized out that I needed to uncheck the setting to keep it from overwriting TWRP and after that was not able to boot into recovery. After finding your beginners guide (thanks, by the way, very well written) I tried using fastboot from the command line as you show, but still no luck.
Thanks in advance for any help...

bellino13 said:
I used the oneplus toolbox from the forum to unlock the bootloader, then flash the TWRP, but no luck in getting into recovery mode. It just boot loops with the oneplus logo until I release the volume down button at which point it then boots to the lock screen.
Click to expand...
Click to collapse
bellino13 said:
@Heisenberg I'm also having trouble getting into recovery. I've tried the different button combos (power + vol down; power + vol down and release power) as well as the advance reboot options to get into recovery, but they all fail. I get the 1+ logo and after I let go of the volume down button the screen goes black and boots again to the 1+ screen and then to the lockscreen. It's almost like it doesn't recognize the recovery. I tried putting the stock recovery back on using the image in the OnePlus One toolkit folder, but that one doesn't work either. In addition to unchecking the "CM Recovery Update", are there any other settings that could be causing problems?
For background info, I initially used the toolkit interface to unlock the bootloader and then flash the recovery. The bootloader unlocked with no issue...it wiped my device and I was in sync with the "How to root" video posted by alex.inthi. I got sidetracked after the (seemingly) successful flash of TWRP onto the phone I kept getting booted into the Cyanogen recovery. I realized out that I needed to uncheck the setting to keep it from overwriting TWRP and after that was not able to boot into recovery. After finding your beginners guide (thanks, by the way, very well written) I tried using fastboot from the command line as you show, but still no luck.
Click to expand...
Click to collapse
Okay, I must have been having a special kind of moment - I've got TWRP 2.8.7.0 running on my handset now. I may have been holding the volume down button too long, or it may be that I was using an older version of TWRP, but I'm going to go with the former. I've also been able to successfully flash and boot into Philz 6.59.2

Having the same problem
I am having the exact same problem and cannot seem to find a solution. Recovery screen just doesn't appear, but goes to lockscreen.
Tried erasing, flashing both twrp, philz etc., but nothing works. The phone doesn't recognize the recovery status. Advanced booting does the same.
Update CM-recovery is checked off, phone is unlocked. I've followed every step of the big guide down to every detail.
Is manually flashing the 12.1 ROM the only way and in that case: is it hard for a relative newcomer?

Recovery Flash not working

Hello, I bought a OnePlus one (came with CM11 - 4.4.4) and followed the standard steps to root it
1) unlock bootloader - successful, phone got factory reset, checked the status using fastboot
2) Flash custom recovery (TWRP) using fastboot - always "okay" message
3) The phone DOES NOT boot to recovery after this - it gets stuck at the 1+ logo, or remains stuck for a few seconds and goes to normal reboot. -I've tried using fastboot to reboot phone while holding down volume button
Please help! i've look this problem up and haven't found a solution.
I tried 2.7.0.0, and the latest 2.8.5.1, along with 2.8.6.0, along with trying to use the one plus tool kit. Using the toolkit, even flashing the stock recovery, then booting it didn't work.

after you flash recovery in fastboot, do not issue the fastboot reboot command. you need to manually power off the phone by keeping the power button pressed till it powers off

kenboyles72 said:
after you flash recovery in fastboot, do not issue the fastboot reboot command. you need to manually power off the phone by keeping the power button pressed till it powers off
Click to expand...
Click to collapse
I tried this, same result

ak14523 said:
I tried this, same result
Click to expand...
Click to collapse
As the other posted mentioned you have to fastboot flash twrp (2.8.6.0) then power off phone and use volume down + power button combo to get to recovery. Its flashing but if you boot to OS it will be overwritten by CM recovery hence booting directly will alleviate that

Boot into os, enable dev options by tapping the build number a bunch of times in settings-about phone section, go back and go into settings-developer options, make sure "update cyanogen recovery" is unchecked. Flash recovery again, and like people have said, power off the phone and use volume down and power buttons together to boot into recovery.

Thanks for the quick replies guys. I have tried all the above s and none of them have worked

Should I try unlocking the bootloader again?

I recommend going to this guide and following it closely: http://forum.xda-developers.com/oneplus-one/general/guides-bacon-timmaaas-how-to-guides-t2839471
As for which version of TWRP to use, I recommend this version: https://www.androidfilehost.com/?fid=24391638059059048

Not getting into recovery

I'm not able to get into recovery.
After doing something stupid on my phone, i wanted to flash a new rom (crDroid). But the recovery gave an error 7. So i wanted to flash the recovery from the thread. I wasn't near a pc so i downloaded an app called Rashr to flash the recovery.img. But then my phone wouldn't boot or get into recovery.
So i used the official flashtool from sony to flash the official software to reset my phone and now my phone works again, but i still wanted crDroid. I downloaded a permissive kernel from zach and installed it through fastboot. I also installed the recovery through fastboot but when i booted, no yellow light came up and holding the volume up button wouldn't work as well.
Any suggestions?
Edit: Also fastboot boot recovery.img results in the phone being stuck at the sony logo

When you have recovery installed in FOTA partition, you can enter it by holding VOL DOWN + Power button while the phone is off.
The way you described only applies when recovery is installed in boot partition.

serenize said:
When you have recovery installed in FOTA partition, you can enter it by holding VOL DOWN + Power button while the phone is off.
The way you described only applies when recovery is installed in boot partition.
Click to expand...
Click to collapse
This only works with 100% reliability after flashing at least .160 Nougat firmware via FTF (XperiFirm),
then flashing twrp/recovery via
Code:
fastboot flash recovery recovery.img
and the behavior varies from country to country (or even firmware to firmware, among network operators / giving the name "custom firmware" credit :silly.
This time [2nd flash of .160 firmware, different operator] the notification led lights up violet for me, previously it was something else (a form of red, orange) and recovery almost instantly booted up,
now it takes several seconds - if not 30 seconds until it's in TWRP.

Okay so i'm on 34.4.A.0.160. I flashed some different recovery images by now but still no change in the situation. I did al the recovery flashing using the 'fastboot flash recovery recovery.img' code and fastboot gave no errors and it looked like it works everytime. But when i boot there is no led light during the entire boot sequence.
Also booting to recovery with volume down + power button when phone is off, didn't work. It just boots normal. I tried it serveral times and every time i changed some things, like pressing the volume button or power button for a longer time. Also once again, here no led indicators appear....
My led light is not broken as it still lights up when i get a message.

I installed a old lolipop firmware through flashtool, installed the Androplus permissive kernel and recovery, also from Androplus, through fastboot. Now when the phone boots it gets a yellow led indicator. When pressing volume up during the indicator, the light turn orange but the phone does not boot into recovery, but instead reboot itself.
Once again, no idea what is happening. Fastboot is working fine or i would not be able to flash the permissive kernel and get a yellow led light. But why won't my phone boot to recovery? I tried multiple different variants of twrp by different people. Tried multiple firmwares. I think there is something wrong with the partition where the recovery is stored. Is this possible? And if so, how would i fix it?

*i think it is against the rules, but here is a BUMP*
No one any idea ? I can't flash anything without recovery

Same here

I had a similar experience. What worked for me was
"fastboot erase recovery" before fastboot flash recovery etc.
Might work.

Wow - folks there you have your answer - but no one seems to care or read it:
serenize said:
When you have recovery installed in FOTA partition, you can enter it by holding VOL DOWN + Power button while the phone is off.
The way you described only applies when recovery is installed in boot partition.
Click to expand...
Click to collapse
well, I flash twrp to the recovery partition (FOTA huh ?)
Code:
fastboot flash recovery twrp.img
after both steps were [OK]
you can disconnect the cable (= phone off)
Now press VOL DOWN + POWER at the same time,
wait for the Sony logo/screen to appear,
wait 1-3 seconds and release the POWER button - keep the VOL DOWN button pressed [probably can release ALL but still ...]
the phone should boot into TWRP/recovery after quite some time

Just boot the recovery:
$ fastboot boot twrp.img

[SOLVED] TWRP not booting

I've been trying to flash TWRP onto my Galaxy S3 and my Galaxy S9 for a few days now, and every time I try to do so, it flashes successfully, but then boots into stock Samsung recovery when entering recovery mode. I've used Odin on Windows and Heimdall on Linux, but both have the same issue. I tried different versions of TWRP as well.
If it helps, I'm pretty sure both phones are OEM unlocked. The S9 has the option in developer options, and says it it unlocked in download mode. The S3 doesn't have any option for this, and doesn't say anything in download mode about it.
Even though the S3 might not be OEM unlocked, it still doesn't explain the issue with the S9.
I'm also dual booting, so all attempts were from the same computer. It might be some issue with my computer, but I really don't have access to another one right now, so I was wondering if anyone had any other ideas or thoughts on the issue. Any help would be appreciated.

Did you check this?
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
Click to expand...
Click to collapse
https://twrp.me/samsung/samsunggalaxys3internationalexynos.html
I think for S3 it's
Vol up + Home + Power
Basically:
1. Flashing
2. Reboot into Recovery by keep pressing Vol up + Home + Power
3. Allow TWRP to become permanent
Perhaps you want to check/re-ask here as well:
https://forum.xda-developers.com/c/samsung-galaxy-s-iii-i9300-i9305.1563/

SigmundDroid said:
Did you check this?
https://twrp.me/samsung/samsunggalaxys3internationalexynos.html
I think for S3 it's
Vol up + Home + Power
Basically:
1. Flashing
2. Reboot into Recovery by keep pressing Vol up + Home + Power
3. Allow TWRP to become permanent
Perhaps you want to check/re-ask here as well:
https://forum.xda-developers.com/c/samsung-galaxy-s-iii-i9300-i9305.1563/
Click to expand...
Click to collapse
Holding the given buttons just brings me to default recovery, so I'm not sure what the proper recovery is. I've also tried Volume Up + Down + Home + Power.

Hmm, didn't flash an S3 for quite some time but I vaguely remember that I had similar problems during
"After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted"
and often missed or was too clumsy, too late or both
Would in fastboot the command
fastboot reboot recovery
work for you? Or does it still end up in stock recovery?
Perhaps it's really time to check in the s3 threads for further advice?

SigmundDroid said:
Hmm, didn't flash an S3 for quite some time but I vaguely remember that I had similar problems during
"After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted"
and often missed or was too clumsy, too late or both
Would in fastboot the command
fastboot reboot recovery
work for you? Or does it still end up in stock recovery?
Perhaps it's really time to check in the s3 threads for further advice?
Click to expand...
Click to collapse
Okay so turns out I needed to boot into recovery immediately after flashing TWRP on both phones because when booting into the system, the recovery is replaced. After doing this, everything worked fine and I was able to get custom ROMs working! I appreciate your help though