Database Info

[Q] Can't boot into recovery

Trying to install CyanogenMod for my razr maxx HD. Recently used RSDlite to install 183.46.10 after OTA KK update kept failing. Then used towelroot to root and motopocalype to unlock bootloader. Fastboot screen shows bootloader is unlocked with status code: 3.
I then followed the instructions on the CyanogenMod site to flash CWM 6.0.4.4 recovery using fastboot, and all appeared to work fine.
However, when I try to reboot into recovery, nothing happens. I get hung up on the motorola dual core flashscreen for about a minute or two, then the screen goes black, then the phone reboots normally.
I tried flashing a different copy of CWM, tried TRWP, and tried several third party apps from Google Play store to boot directly into recovery using software reboot instead of hardware keys - all with the same results. I even tried flashing custom CWM recovery using ROM Manager and Rashr, same result.
Do I have a corrupt recovery partition? Any suggestions for how to fix?

You need to install a recovery for that phone specifically.
http://androidhosting.org/Devs/Dhacker29/
Use the recovery files found here.
Edit: on the site I posted, browse to the msm8690 folder. There you will find the recovery files.

to make this even easier here
TWRP http://forum.xda-developers.com/showthread.php?t=2776515
CWM http://forum.xda-developers.com/showthread.php?t=2747535
next time be sure your flashing for this phone and bootloader

billycar11 said:
to make this even easier here
TWRP http://forum.xda-developers.com/showthread.php?t=2776515
CWM http://forum.xda-developers.com/showthread.php?t=2747535
next time be sure your flashing for this phone and bootloader
Click to expand...
Click to collapse
Thanks, guys, total noob mistake. I knew the recovery needed to be specific for the phone, but didn't realize it varied depending on the bootloader. Will try again with the right recovery!

billycar11 said:
to make this even easier here
TWRP http://forum.xda-developers.com/showthread.php?t=2776515
CWM http://forum.xda-developers.com/showthread.php?t=2747535
next time be sure your flashing for this phone and bootloader
Click to expand...
Click to collapse
Those recovery aren't sticking for me. Does anyone have a suggestion to fix that issue.
Pushing the buttons doesn't work.
The only thing that is working is place the phone in fastboot mode and flash the recovery to my device three time and then I will go straight in recovery and there it is.
Sent from my SM-N900V using Tapatalk

TheGman125 said:
Those recovery aren't sticking for me. Does anyone have a suggestion to fix that issue.
Pushing the buttons doesn't work.
The only thing that is working is place the phone in fastboot mode and flash the recovery to my device three time and then I will go straight in recovery and there it is.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Your phone has been upgraded to Kit Kat and the bootloader unlocked, correct? The two recoveries linked to are for phones that already have already been upgraded to KK.
If so, power off your phone.
Then, hold down volume up and then press and hold power. After a few seconds, let go and the boot menu should come up.
Use Volume down to select "Recovery" and then hit "Volume Up". That should boot you into the custom recovery, depending on which one you flashed.
I prefer TWRP. CWM seemed buggy and it wouldn't always boot into it. A lot of times, I'd get a blank screen and would have to reflash it.
Another option is, when it's booted up, hooked up your phone to your pc and use adb to reboot it into recovery using "adb reboot recovery".

iBolski said:
Your phone has been upgraded to Kit Kat and the bootloader unlocked, correct? The two recoveries linked to are for phones that already have already been upgraded to KK.
If so, power off your phone.
Then, hold down volume up and then press and hold power. After a few seconds, let go and the boot menu should come up.
Use Volume down to select "Recovery" and then hit "Volume Up". That should boot you into the custom recovery, depending on which one you flashed.
I prefer TWRP. CWM seemed buggy and it wouldn't always boot into it. A lot of times, I'd get a blank screen and would have to reflash it.
Another option is, when it's booted up, hooked up your phone to your pc and use adb to reboot it into recovery using "adb reboot recovery".
Click to expand...
Click to collapse
Yep.. I had some issue with my devices. I tried the update well root and the devices didn't want to boot up anymore. So I had to RSD lite the devices back to health. So I do have the latest software for the devices. I guess. I am going to use Twrp since you say it boots fine from the boot menu.

TheGman125 said:
Yep.. I had some issue with my devices. I tried the update well root and the devices didn't want to boot up anymore. So I had to RSD lite the devices back to health. So I do have the latest software for the devices. I guess. I am going to use Twrp since you say it boots fine from the boot menu.
Click to expand...
Click to collapse
Is your bootloader unlocked? If not, that is your problem. You need to root, and then unlock the bootloader before you can flash TWRP and use CM.

iBolski said:
Is your bootloader unlocked? If not, that is your problem. You need to root, and then unlock the bootloader before you can flash TWRP and use CM.
Click to expand...
Click to collapse
Yes my bootloader is unlocked. Have code 3 on the devices.

try and unplug from USB when you reboot

PhilZ recovery issues

Finally got around to unlocking my device with SunShine and was looking forward to installing a Moto X rom. Installed PhilZ recovery and set about cleaning the phone state to I could install rom. Unfortunately, I couldn't connect to the phone with ADB in PhilZ while trying to sideload the rom. I reboot my phone to try again and now I can't seem to get past the unlocked bootloader warning. Holding Vol+ and Power isn't taking me to recovery. Fastboot cable doesn't either. Any ideas?

zefyx said:
Finally got around to unlocking my device with SunShine and was looking forward to installing a Moto X rom. Installed PhilZ recovery and set about cleaning the phone state to I could install rom. Unfortunately, I couldn't connect to the phone with ADB in PhilZ while trying to sideload the rom. I reboot my phone to try again and now I can't seem to get past the unlocked bootloader warning. Holding Vol+ and Power isn't taking me to recovery. Fastboot cable doesn't either. Any ideas?
Click to expand...
Click to collapse
Hold vol- and power for 3 secs then let go of vol- keep holding power for another 3secs then let go. That should get you to bootloader. Then scroll using vol-, use vol+ to select. If you plan on running ghost (Moto x) roms only then you need to use Phils touch ghost build and cm12 patch.
Did you nandroid your stock rom, if so restore and boot up then just plug in the phone and transfer roms/gapps. I never used adb sideload as it is easier just to download directly to the phone...just don't wipe internal storage

Yeah, it's always super difficult to get my phone into recovery for some reason. I backed up my original files, but removed them when trying to get the new rom installed by accident -.-
EDIT: finally got Mini into recovery but the same issue with not being seen by adb is here. I'm not sure how to proceed as Moto Device Mgr is installed and when I plug/unplug the device I hear a chime.

going to use fastboot to start from scratch and get rid of philz. thanks anyway guys.

you cannot ADB from Philz... or at least mine doesnt let me either.

I wonder how you made out with this issue.
I wanted to say, you're doing it wrong. I run the Moto-X ROM on my Maxx. Piece of cake.
You do must use Philz recovery. From your booted stock ROM connect your phone to your PC and copy the ROM, gapps and CM11 Patch, (SuperSU also) to your phone into the Download folder. To boot into fastboot is simple, press and hold vol- and pwr, I do about 5 secs and release the pwr button. Vol- to recovery and press vol+ to select.
Install zips from there, ROM, then gapps, then patch, then SuperSU. All done.

[Q] Can't boot into recovery?

So, I got my new OnePlus One today and I tried to get CM12 onto it. I was following the [GUIDE] How to Install CM12 on the OnePlus One- Android Lollipop/5.0 on the OPO forums, and everything went well until I tried to get the TWRP on there. I flashed the recovery and rebooted the phone. I turned it off and then tried to boot it into recovery but it doesn't, it just hangs at the OPO logo until I hard-restart it.
I've tried factory resetting it and doing
fastboot oem unlock
but nothing happened. The factory reset pretty much just reset the phone. I think I might've messed up the kernel. How do I fix it?
EDIT 1: I've tried reflashing twrp recoveries and nothing. When I hold power+volume down, it powers on, shows the one plus logo, then reboots and just goes to the lockscreen.
UPDATE 1: I managed to manually flash all the CM12 files and use lollipop. I haven't tried the recovery yet but I'll keep you guys updated (if any of you even care).
UPDATE 2: Apparently flashing CM12 made the recovery work. Everything works as it should and the OTA to the most recent CM12 worked perfectly.

You're probably doing the button combo wrong. Hold volume down, then hold power (so you're holding them together), when you see the boot logo let go of power but keep holding volume down until you reach recovery.

Heisenberg said:
You're probably doing the button combo wrong. Hold volume down, then hold power (so you're holding them together), when you see the boot logo let go of power but keep holding volume down until you reach recovery.
Click to expand...
Click to collapse
I was curios and enabled advanced reboot to try and boot into recovery and it worked (after I had flashed CM12). Everything's working now.

SDCore said:
UPDATE 1: I managed to manually flash all the CM12 files and use lollipop. I haven't tried the recovery yet but I'll keep you guys updated (if any of you even care).
Click to expand...
Click to collapse
How did you manually flash CM12? I think I'm having the same trouble you were having. I used the oneplus toolbox from the forum to unlock the bootloader, then flash the TWRP, but no luck in getting into recovery mode. It just boot loops with the oneplus logo until I release the volume down button at which point it then boots to the lock screen.

Heisenberg said:
You're probably doing the button combo wrong. Hold volume down, then hold power (so you're holding them together), when you see the boot logo let go of power but keep holding volume down until you reach recovery.
Click to expand...
Click to collapse
@Heisenberg I'm also having trouble getting into recovery. I've tried the different button combos (power + vol down; power + vol down and release power) as well as the advance reboot options to get into recovery, but they all fail. I get the 1+ logo and after I let go of the volume down button the screen goes black and boots again to the 1+ screen and then to the lockscreen. It's almost like it doesn't recognize the recovery. I tried putting the stock recovery back on using the image in the OnePlus One toolkit folder, but that one doesn't work either. In addition to unchecking the "CM Recovery Update", are there any other settings that could be causing problems?
For background info, I initially used the toolkit interface to unlock the bootloader and then flash the recovery. The bootloader unlocked with no issue...it wiped my device and I was in sync with the "How to root" video posted by alex.inthi. I got sidetracked after the (seemingly) successful flash of TWRP onto the phone I kept getting booted into the Cyanogen recovery. I realized out that I needed to uncheck the setting to keep it from overwriting TWRP and after that was not able to boot into recovery. After finding your beginners guide (thanks, by the way, very well written) I tried using fastboot from the command line as you show, but still no luck.
Thanks in advance for any help...

bellino13 said:
I used the oneplus toolbox from the forum to unlock the bootloader, then flash the TWRP, but no luck in getting into recovery mode. It just boot loops with the oneplus logo until I release the volume down button at which point it then boots to the lock screen.
Click to expand...
Click to collapse
bellino13 said:
@Heisenberg I'm also having trouble getting into recovery. I've tried the different button combos (power + vol down; power + vol down and release power) as well as the advance reboot options to get into recovery, but they all fail. I get the 1+ logo and after I let go of the volume down button the screen goes black and boots again to the 1+ screen and then to the lockscreen. It's almost like it doesn't recognize the recovery. I tried putting the stock recovery back on using the image in the OnePlus One toolkit folder, but that one doesn't work either. In addition to unchecking the "CM Recovery Update", are there any other settings that could be causing problems?
For background info, I initially used the toolkit interface to unlock the bootloader and then flash the recovery. The bootloader unlocked with no issue...it wiped my device and I was in sync with the "How to root" video posted by alex.inthi. I got sidetracked after the (seemingly) successful flash of TWRP onto the phone I kept getting booted into the Cyanogen recovery. I realized out that I needed to uncheck the setting to keep it from overwriting TWRP and after that was not able to boot into recovery. After finding your beginners guide (thanks, by the way, very well written) I tried using fastboot from the command line as you show, but still no luck.
Click to expand...
Click to collapse
Okay, I must have been having a special kind of moment - I've got TWRP 2.8.7.0 running on my handset now. I may have been holding the volume down button too long, or it may be that I was using an older version of TWRP, but I'm going to go with the former. I've also been able to successfully flash and boot into Philz 6.59.2

Having the same problem
I am having the exact same problem and cannot seem to find a solution. Recovery screen just doesn't appear, but goes to lockscreen.
Tried erasing, flashing both twrp, philz etc., but nothing works. The phone doesn't recognize the recovery status. Advanced booting does the same.
Update CM-recovery is checked off, phone is unlocked. I've followed every step of the big guide down to every detail.
Is manually flashing the 12.1 ROM the only way and in that case: is it hard for a relative newcomer?

Manually flashed 6.0 stock images, but only get dead android for recovery

I have searched around but cannot find a solution. I can't seem to get a working recovery after flashing stock images with and without TWRP 2.8.7.1.
I followed these steps to upgrade to Android 6.0 after verifying the md5 checksum of my download:
adb reboot bootloader
fastboot flash bootloader bootloader-hammerhead....img [it looks the same as before, but I did it anyway]
reboot bootloader
fastboot flash radio radio-hammerhead....img
reboot bootloader
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
....I have also tried with and without flashing cache
fastboot reboot
...then I go back into the bootloader and try to access recovery, but I only get the dead android with the red triangle.
Is anyone else having this problem? Does anyone have a suggestion for a fix?
I'm having the same problem with my Nexus 7 (2013).

Hold down the Power button and press Volume Up.

slackhouse said:
Hold down the Power button and press Volume Up.
Click to expand...
Click to collapse
When I see the dead android? When the phone is off? When the phone is booted into the system?

The dead Android means you have stock recovery installed. When you see the dead Android, hold down the power button and push the volume up then release and you will receive the stock recovery menu

funnel71 said:
The dead Android means you have stock recovery installed. When you see the dead Android, hold down the power button and push the volume up then release and you will receive the stock recovery menu
Click to expand...
Click to collapse
Thanks for the description, but it didn't work. If I hold those buttons long enough, it just loops on the "Google" screen, and if I let go, it boots into the system.
After flashing other times, I have been able to either get the recovery menu or enter TWRP when I choose Recovery from the bootloader menu. Not this time though.

Well, I re-extracted the recovery.img file and flashed it - same problem. I decided to try flashing TWRP again. After flashing I rebooted the bootloader (probably not necessary), then chose Recovery and it booted TWRP like I normally expect.
Still not sure what is happening with the stock recovery. For now I don't have to worry - I'm getting my backup.

Sometimes it doesn't work right away, I keep switching between the volume buttons and it eventually pops up. Only need to tap the volume key, no need to hold it when at the dead Android.

Good luck
treefrog321 said:
Well, I re-extracted the recovery.img file and flashed it - same problem. I decided to try flashing TWRP again. After flashing I rebooted the bootloader (probably not necessary), then chose Recovery and it booted TWRP like I normally expect.
Still not sure what is happening with the stock recovery. For now I don't have to worry - I'm getting my backup.
Click to expand...
Click to collapse
Getting into stock recovery from the dead android can be very tricky. As stated above, from the dead android screen, you want to hold the Power Button and press Volume Up quickly, then release. It sounds like you are holding the Power Button way too long which is causing it to do a reboot. I had the same issue the first few times.
Below is a video of someone doing it. On the video, he says to press volume up, volume down, and the power button at the same time until the recovery menu works. But, it is just the power button and volume up. The video will just show you how quickly to press the button combination.
https://youtu.be/DRp5jJO34PE?t=471

I don't recall having any difficulty in the past, but I think I get it now. Thanks for the tips guys.

Recovery Flash not working

Hello, I bought a OnePlus one (came with CM11 - 4.4.4) and followed the standard steps to root it
1) unlock bootloader - successful, phone got factory reset, checked the status using fastboot
2) Flash custom recovery (TWRP) using fastboot - always "okay" message
3) The phone DOES NOT boot to recovery after this - it gets stuck at the 1+ logo, or remains stuck for a few seconds and goes to normal reboot. -I've tried using fastboot to reboot phone while holding down volume button
Please help! i've look this problem up and haven't found a solution.
I tried 2.7.0.0, and the latest 2.8.5.1, along with 2.8.6.0, along with trying to use the one plus tool kit. Using the toolkit, even flashing the stock recovery, then booting it didn't work.

after you flash recovery in fastboot, do not issue the fastboot reboot command. you need to manually power off the phone by keeping the power button pressed till it powers off

kenboyles72 said:
after you flash recovery in fastboot, do not issue the fastboot reboot command. you need to manually power off the phone by keeping the power button pressed till it powers off
Click to expand...
Click to collapse
I tried this, same result

ak14523 said:
I tried this, same result
Click to expand...
Click to collapse
As the other posted mentioned you have to fastboot flash twrp (2.8.6.0) then power off phone and use volume down + power button combo to get to recovery. Its flashing but if you boot to OS it will be overwritten by CM recovery hence booting directly will alleviate that

Boot into os, enable dev options by tapping the build number a bunch of times in settings-about phone section, go back and go into settings-developer options, make sure "update cyanogen recovery" is unchecked. Flash recovery again, and like people have said, power off the phone and use volume down and power buttons together to boot into recovery.

Thanks for the quick replies guys. I have tried all the above s and none of them have worked

Should I try unlocking the bootloader again?

I recommend going to this guide and following it closely: http://forum.xda-developers.com/oneplus-one/general/guides-bacon-timmaaas-how-to-guides-t2839471
As for which version of TWRP to use, I recommend this version: https://www.androidfilehost.com/?fid=24391638059059048