I've been trying to flash TWRP onto my Galaxy S3 and my Galaxy S9 for a few days now, and every time I try to do so, it flashes successfully, but then boots into stock Samsung recovery when entering recovery mode. I've used Odin on Windows and Heimdall on Linux, but both have the same issue. I tried different versions of TWRP as well.
If it helps, I'm pretty sure both phones are OEM unlocked. The S9 has the option in developer options, and says it it unlocked in download mode. The S3 doesn't have any option for this, and doesn't say anything in download mode about it.
Even though the S3 might not be OEM unlocked, it still doesn't explain the issue with the S9.
I'm also dual booting, so all attempts were from the same computer. It might be some issue with my computer, but I really don't have access to another one right now, so I was wondering if anyone had any other ideas or thoughts on the issue. Any help would be appreciated.
Did you check this?
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
Click to expand...
Click to collapse
https://twrp.me/samsung/samsunggalaxys3internationalexynos.html
I think for S3 it's
Vol up + Home + Power
Basically:
1. Flashing
2. Reboot into Recovery by keep pressing Vol up + Home + Power
3. Allow TWRP to become permanent
Perhaps you want to check/re-ask here as well:
https://forum.xda-developers.com/c/samsung-galaxy-s-iii-i9300-i9305.1563/
SigmundDroid said:
Did you check this?
https://twrp.me/samsung/samsunggalaxys3internationalexynos.html
I think for S3 it's
Vol up + Home + Power
Basically:
1. Flashing
2. Reboot into Recovery by keep pressing Vol up + Home + Power
3. Allow TWRP to become permanent
Perhaps you want to check/re-ask here as well:
https://forum.xda-developers.com/c/samsung-galaxy-s-iii-i9300-i9305.1563/
Click to expand...
Click to collapse
Holding the given buttons just brings me to default recovery, so I'm not sure what the proper recovery is. I've also tried Volume Up + Down + Home + Power.
Hmm, didn't flash an S3 for quite some time but I vaguely remember that I had similar problems during
"After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted"
and often missed or was too clumsy, too late or both
Would in fastboot the command
fastboot reboot recovery
work for you? Or does it still end up in stock recovery?
Perhaps it's really time to check in the s3 threads for further advice?
SigmundDroid said:
Hmm, didn't flash an S3 for quite some time but I vaguely remember that I had similar problems during
"After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted"
and often missed or was too clumsy, too late or both
Would in fastboot the command
fastboot reboot recovery
work for you? Or does it still end up in stock recovery?
Perhaps it's really time to check in the s3 threads for further advice?
Click to expand...
Click to collapse
Okay so turns out I needed to boot into recovery immediately after flashing TWRP on both phones because when booting into the system, the recovery is replaced. After doing this, everything worked fine and I was able to get custom ROMs working! I appreciate your help though
Related
Hi,
I tried to restore my Nexus S (european, GT-I9023) which has a broken power button before sending it to Samsung for repair.
I just screwed my ROM flash using Clockworkmod and now my phone only shows a beautiful Google screen.
When I try to use fastboot screen (using vol+/vol-) nothing moves, and even if it moved I wouldn't be able select any option as my power button is broken. I can't also access Odin (vol+ and vol- pressed when the phone is off) as I can't turn off my phone.
What can I do to flash my rom? May I send it to Samsung anyway?
Thanks for your answers!
Txkw said:
Hi,
I tried to restore my Nexus S (european, GT-I9023) which has a broken power button before sending it to Samsung for repair.
I just screwed my ROM flash using Clockworkmod and now my phone only shows a beautiful Google screen.
When I try to use fastboot screen (using vol+/vol-) nothing moves, and even if it moved I wouldn't be able select any option as my power button is broken. I can't also access Odin (vol+ and vol- pressed when the phone is off) as I can't turn off my phone.
What can I do to flash my rom? May I send it to Samsung anyway?
Thanks for your answers!
Click to expand...
Click to collapse
I am also facing the exact same problem. Can someone kindly guide us please?
Switch off. Press Volume Up and plug in the charging cable. Now, see if you tackle with the Fastboot mode.
Sent from my Nexus S using Tapatalk 2
a2zRulz said:
I am also facing the exact same problem. Can someone kindly guide us please?
Click to expand...
Click to collapse
My power button is broken too.
I solved the problem flashing ClockworkMod Touch from Windows Terminal.
DJBhardwaj said:
Switch off. Press Volume Up and plug in the charging cable. Now, see if you tackle with the Fastboot mode.
Sent from my Nexus S using Tapatalk 2
Click to expand...
Click to collapse
He might not be able to. When the power button breaks, it stays in a "on" state and that messed up fastboot as it doesn't let you scroll or initialize properly.
a2zRulz said:
I am also facing the exact same problem. Can someone kindly guide us please?
Click to expand...
Click to collapse
If your rom starts booting (you see a quick flash after initial Google logo) you might be able to ADB from there (while it's not booting and the rom logo is showing, I know weird but often works). Check it out.
Edit: Oh and if you get adb access, then what you want to do is "reboot recovery" to reboot to recovery, and then wipe/flash a rom and whatnot.
polobunny said:
He might not be able to. When the power button breaks, it stays in a "on" state and that messed up fastboot as it doesn't let you scroll or initialize properly.
If your rom starts booting (you see a quick flash after initial Google logo) you might be able to ADB from there (while it's not booting and the rom logo is showing, I know weird but often works). Check it out.
Edit: Oh and if you get adb access, then what you want to do is "reboot recovery" to reboot to recovery, and then wipe/flash a rom and whatnot.
Click to expand...
Click to collapse
You are absolutely right. The phone thinks that the power button is pressed and doesn't let us move up and down using the volume keys.
Also, even if I get adb access after the Google logo, how do I use fastboot mode? I actually wanted to flash a recovery as my Power button doesn't work even in the recovery. Moreover, I can boot into recovery without adb, from inside the rom power menu.
So adb doesn't help here
a2zRulz said:
You are absolutely right. The phone thinks that the power button is pressed and doesn't let us move up and down using the volume keys.
Also, even if I get adb access after the Google logo, how do I use fastboot mode? I actually wanted to flash a recovery as my Power button doesn't work even in the recovery. Moreover, I can boot into recovery without adb, from inside the rom power menu.
So adb doesn't help here
Click to expand...
Click to collapse
What recovery do you currently have? All custom recoveries enable you to scroll with menu and home key, go back with the back key and select with the search key. So if you can get adb while it's "not booting" and reboot to your custom recovery, then you can navigate, mount usb and transfer a rom if needed or flash one that is on your phone.
Edit: Also, I was under the impression you couldn't boot your ROM. If you can, what is it exactly that you are trying to do??
polobunny said:
What recovery do you currently have? All custom recoveries enable you to scroll with menu and home key, go back with the back key and select with the search key. So if you can get adb while it's "not booting" and reboot to your custom recovery, then you can navigate, mount usb and transfer a rom if needed or flash one that is on your phone.
Edit: Also, I was under the impression you couldn't boot your ROM. If you can, what is it exactly that you are trying to do??
Click to expand...
Click to collapse
I have ClockworkMod (CWM) 6.0.2.5 Non-Touch from this thread:
Code:
http://forum.xda-developers.com/showthread.php?t=2032337
I flashed this earlier when my power button was working. And I have tried all the capacitive buttons. None of them work with this recovery. That's why I was looking forward to flashing a touch based recovery.
a2zRulz said:
I have ClockworkMod (CWM) 6.0.2.5 Non-Touch from this thread:
Code:
http://forum.xda-developers.com/showthread.php?t=2032337
I flashed this earlier when my power button was working. And I have tried all the capacitive buttons. None of them work with this recovery. That's why I was looking forward to flashing a touch based recovery.
Click to expand...
Click to collapse
From the same thread you can simply download any of these (highly suggest ClockworkMod (CWM) 5.8.0.2 Touch, one if not the most reliable) and flash them from within your current CWM.
polobunny said:
From the same thread you can simply download any of these (highly suggest ClockworkMod (CWM) 5.8.0.2 Touch, one if not the most reliable) and flash them from within your current CWM.
Click to expand...
Click to collapse
Dear sir,
Please understand. That's what I am trying to tell you. I cannot use power button or any other button to select anything in the recovery. So how will I install this one?
a2zRulz said:
Dear sir,
Please understand. That's what I am trying to tell you. I cannot use power button or any other button to select anything in the recovery. So how will I install this one?
Click to expand...
Click to collapse
Ok let's get this right
What is your goal? Flash a different recovery? Then you can flash a recovery from within something such as ROM Manager if your rom still boots.
Yes sir, my goal is to flash a touch based recovery just so that I can flash new ROMs and kernels without the help of the power button.
Koushik charges for in-app flashing of CWM Touch which is otherwise free. So that's the main issue here. I guess I'll have to live with it
a2zRulz said:
Yes sir, my goal is to flash a touch based recovery just so that I can flash new ROMs and kernels without the help of the power button.
Koushik charges for in-app flashing of CWM Touch which is otherwise free. So that's the main issue here. I guess I'll have to live with it
Click to expand...
Click to collapse
Ok.
You can use this Flash Image GUI to flash a recovery of your choice from within Android then:
http://forum.xda-developers.com/showthread.php?t=1453617
It's free. Make sure to download the right recovery for your device and select recovery image in Flash Image GUI.
polobunny said:
Ok.
You can use this Flash Image GUI to flash a recovery of your choice from within Android then:
http://forum.xda-developers.com/showthread.php?t=1453617
It's free. Make sure to download the right recovery for your device and select recovery image in Flash Image GUI.
Click to expand...
Click to collapse
You sir, are my hero... Many thanks for this :highfive: :victory:
If you are flashing a touch version of CWM recovery, I highly suggest v6.0.1.0. The later version (up to 6.0.2.5) have a bug that will make you unable to mount the SD card within the recovery. Otherwise TWRP is very interesting, but backups made with CWM are not compatible with TWRP.
Thanks, I'll try TWRP this time
I rebooted my OnePlus One yesterday and found myself in a weird situation. The phone would go to the initial OnePlus logo then after, a smal android logo with a red warning sign appears for a split second, and I boot into the CM stock recovery. I can't turn it on or enter fastboot, nor can I turn on ADB Debugging on my phone and would really appreciate help as I do not want this phone to be gone. Pretty scared guys, help would be much appreciated!
I've never seen this problem before.
I supose you are bootloader unlocked, rooted and have costum recovery, right?
For fastboot, if it does not work normally, try: up button + power with the phone connected to the PC; if it does not work, try the same button combo + plug the phone to the pc while you are holding down the buttons.
badjoras said:
I've never seen this problem before.
I supose you are bootloader unlocked, rooted and have costum recovery, right?
For fastboot, if it does not work normally, try: up button + power with the phone connected to the PC; if it does not work, try the same button combo + plug the phone to the pc while you are holding down the buttons.
Click to expand...
Click to collapse
Thanks for the prompt response. I think you should also know that I attempted to put a custom recovery on my OPO, but after saying that it worked, I only loaded into the CM Stock Recovery. I do not, have my phone with me at the moment as I did not think it would be necessary to bring to school with me, but I will attempt everything you have said. Thanks for the help so far!
badjoras said:
I've never seen this problem before.
I supose you are bootloader unlocked, rooted and have costum recovery, right?
For fastboot, if it does not work normally, try: up button + power with the phone connected to the PC; if it does not work, try the same button combo + plug the phone to the pc while you are holding down the buttons.
Click to expand...
Click to collapse
I attempted both ways but nothing happens as I press the buttons. It will only boot in the CM Simple Recovery.
NizzleFish98 said:
I attempted both ways but nothing happens as I press the buttons. It will only boot in the CM Simple Recovery.
Click to expand...
Click to collapse
I believe you messed it up for good, since you: can't get into fastboot; have no recovery; have no backups... If you could get fastboot to go you would only need to flash twrp and then sideload a rom =/
Does the stock recovery let you sideload?
badjoras said:
I believe you messed it up for good, since you: can't get into fastboot; have no recovery; have no backups... If you could get fastboot to go you would only need to flash twrp and then sideload a rom =/
Does the stock recovery let you sideload?
Click to expand...
Click to collapse
Yes. It does.
Download the stock image. I'm sure it will be there somewhere in the forums.
Then go to recovery and do the following:
Select 'apply update'. Then you either have the option to apply update from Internal Storage or from adb.
Select adb and enter: adb sideload update_filename.zip
badjoras said:
I believe you messed it up for good, since you: can't get into fastboot; have no recovery; have no backups... If you could get fastboot to go you would only need to flash twrp and then sideload a rom =/
Does the stock recovery let you sideload?
Click to expand...
Click to collapse
assuming it's the stock android recovery, i'm pretty sure it allows for sideloading.
Def sounds like something got flashed to the wrong parition though
So, I got my new OnePlus One today and I tried to get CM12 onto it. I was following the [GUIDE] How to Install CM12 on the OnePlus One- Android Lollipop/5.0 on the OPO forums, and everything went well until I tried to get the TWRP on there. I flashed the recovery and rebooted the phone. I turned it off and then tried to boot it into recovery but it doesn't, it just hangs at the OPO logo until I hard-restart it.
I've tried factory resetting it and doing
fastboot oem unlock
but nothing happened. The factory reset pretty much just reset the phone. I think I might've messed up the kernel. How do I fix it?
EDIT 1: I've tried reflashing twrp recoveries and nothing. When I hold power+volume down, it powers on, shows the one plus logo, then reboots and just goes to the lockscreen.
UPDATE 1: I managed to manually flash all the CM12 files and use lollipop. I haven't tried the recovery yet but I'll keep you guys updated (if any of you even care).
UPDATE 2: Apparently flashing CM12 made the recovery work. Everything works as it should and the OTA to the most recent CM12 worked perfectly.
You're probably doing the button combo wrong. Hold volume down, then hold power (so you're holding them together), when you see the boot logo let go of power but keep holding volume down until you reach recovery.
Heisenberg said:
You're probably doing the button combo wrong. Hold volume down, then hold power (so you're holding them together), when you see the boot logo let go of power but keep holding volume down until you reach recovery.
Click to expand...
Click to collapse
I was curios and enabled advanced reboot to try and boot into recovery and it worked (after I had flashed CM12). Everything's working now.
SDCore said:
UPDATE 1: I managed to manually flash all the CM12 files and use lollipop. I haven't tried the recovery yet but I'll keep you guys updated (if any of you even care).
Click to expand...
Click to collapse
How did you manually flash CM12? I think I'm having the same trouble you were having. I used the oneplus toolbox from the forum to unlock the bootloader, then flash the TWRP, but no luck in getting into recovery mode. It just boot loops with the oneplus logo until I release the volume down button at which point it then boots to the lock screen.
Heisenberg said:
You're probably doing the button combo wrong. Hold volume down, then hold power (so you're holding them together), when you see the boot logo let go of power but keep holding volume down until you reach recovery.
Click to expand...
Click to collapse
@Heisenberg I'm also having trouble getting into recovery. I've tried the different button combos (power + vol down; power + vol down and release power) as well as the advance reboot options to get into recovery, but they all fail. I get the 1+ logo and after I let go of the volume down button the screen goes black and boots again to the 1+ screen and then to the lockscreen. It's almost like it doesn't recognize the recovery. I tried putting the stock recovery back on using the image in the OnePlus One toolkit folder, but that one doesn't work either. In addition to unchecking the "CM Recovery Update", are there any other settings that could be causing problems?
For background info, I initially used the toolkit interface to unlock the bootloader and then flash the recovery. The bootloader unlocked with no issue...it wiped my device and I was in sync with the "How to root" video posted by alex.inthi. I got sidetracked after the (seemingly) successful flash of TWRP onto the phone I kept getting booted into the Cyanogen recovery. I realized out that I needed to uncheck the setting to keep it from overwriting TWRP and after that was not able to boot into recovery. After finding your beginners guide (thanks, by the way, very well written) I tried using fastboot from the command line as you show, but still no luck.
Thanks in advance for any help...
bellino13 said:
I used the oneplus toolbox from the forum to unlock the bootloader, then flash the TWRP, but no luck in getting into recovery mode. It just boot loops with the oneplus logo until I release the volume down button at which point it then boots to the lock screen.
Click to expand...
Click to collapse
bellino13 said:
@Heisenberg I'm also having trouble getting into recovery. I've tried the different button combos (power + vol down; power + vol down and release power) as well as the advance reboot options to get into recovery, but they all fail. I get the 1+ logo and after I let go of the volume down button the screen goes black and boots again to the 1+ screen and then to the lockscreen. It's almost like it doesn't recognize the recovery. I tried putting the stock recovery back on using the image in the OnePlus One toolkit folder, but that one doesn't work either. In addition to unchecking the "CM Recovery Update", are there any other settings that could be causing problems?
For background info, I initially used the toolkit interface to unlock the bootloader and then flash the recovery. The bootloader unlocked with no issue...it wiped my device and I was in sync with the "How to root" video posted by alex.inthi. I got sidetracked after the (seemingly) successful flash of TWRP onto the phone I kept getting booted into the Cyanogen recovery. I realized out that I needed to uncheck the setting to keep it from overwriting TWRP and after that was not able to boot into recovery. After finding your beginners guide (thanks, by the way, very well written) I tried using fastboot from the command line as you show, but still no luck.
Click to expand...
Click to collapse
Okay, I must have been having a special kind of moment - I've got TWRP 2.8.7.0 running on my handset now. I may have been holding the volume down button too long, or it may be that I was using an older version of TWRP, but I'm going to go with the former. I've also been able to successfully flash and boot into Philz 6.59.2
Having the same problem
I am having the exact same problem and cannot seem to find a solution. Recovery screen just doesn't appear, but goes to lockscreen.
Tried erasing, flashing both twrp, philz etc., but nothing works. The phone doesn't recognize the recovery status. Advanced booting does the same.
Update CM-recovery is checked off, phone is unlocked. I've followed every step of the big guide down to every detail.
Is manually flashing the 12.1 ROM the only way and in that case: is it hard for a relative newcomer?
I have searched around but cannot find a solution. I can't seem to get a working recovery after flashing stock images with and without TWRP 2.8.7.1.
I followed these steps to upgrade to Android 6.0 after verifying the md5 checksum of my download:
adb reboot bootloader
fastboot flash bootloader bootloader-hammerhead....img [it looks the same as before, but I did it anyway]
reboot bootloader
fastboot flash radio radio-hammerhead....img
reboot bootloader
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
....I have also tried with and without flashing cache
fastboot reboot
...then I go back into the bootloader and try to access recovery, but I only get the dead android with the red triangle.
Is anyone else having this problem? Does anyone have a suggestion for a fix?
I'm having the same problem with my Nexus 7 (2013).
Hold down the Power button and press Volume Up.
slackhouse said:
Hold down the Power button and press Volume Up.
Click to expand...
Click to collapse
When I see the dead android? When the phone is off? When the phone is booted into the system?
The dead Android means you have stock recovery installed. When you see the dead Android, hold down the power button and push the volume up then release and you will receive the stock recovery menu
funnel71 said:
The dead Android means you have stock recovery installed. When you see the dead Android, hold down the power button and push the volume up then release and you will receive the stock recovery menu
Click to expand...
Click to collapse
Thanks for the description, but it didn't work. If I hold those buttons long enough, it just loops on the "Google" screen, and if I let go, it boots into the system.
After flashing other times, I have been able to either get the recovery menu or enter TWRP when I choose Recovery from the bootloader menu. Not this time though.
Well, I re-extracted the recovery.img file and flashed it - same problem. I decided to try flashing TWRP again. After flashing I rebooted the bootloader (probably not necessary), then chose Recovery and it booted TWRP like I normally expect.
Still not sure what is happening with the stock recovery. For now I don't have to worry - I'm getting my backup.
Sometimes it doesn't work right away, I keep switching between the volume buttons and it eventually pops up. Only need to tap the volume key, no need to hold it when at the dead Android.
Good luck
treefrog321 said:
Well, I re-extracted the recovery.img file and flashed it - same problem. I decided to try flashing TWRP again. After flashing I rebooted the bootloader (probably not necessary), then chose Recovery and it booted TWRP like I normally expect.
Still not sure what is happening with the stock recovery. For now I don't have to worry - I'm getting my backup.
Click to expand...
Click to collapse
Getting into stock recovery from the dead android can be very tricky. As stated above, from the dead android screen, you want to hold the Power Button and press Volume Up quickly, then release. It sounds like you are holding the Power Button way too long which is causing it to do a reboot. I had the same issue the first few times.
Below is a video of someone doing it. On the video, he says to press volume up, volume down, and the power button at the same time until the recovery menu works. But, it is just the power button and volume up. The video will just show you how quickly to press the button combination.
https://youtu.be/DRp5jJO34PE?t=471
I don't recall having any difficulty in the past, but I think I get it now. Thanks for the tips guys.
Hello, I bought a OnePlus one (came with CM11 - 4.4.4) and followed the standard steps to root it
1) unlock bootloader - successful, phone got factory reset, checked the status using fastboot
2) Flash custom recovery (TWRP) using fastboot - always "okay" message
3) The phone DOES NOT boot to recovery after this - it gets stuck at the 1+ logo, or remains stuck for a few seconds and goes to normal reboot. -I've tried using fastboot to reboot phone while holding down volume button
Please help! i've look this problem up and haven't found a solution.
I tried 2.7.0.0, and the latest 2.8.5.1, along with 2.8.6.0, along with trying to use the one plus tool kit. Using the toolkit, even flashing the stock recovery, then booting it didn't work.
after you flash recovery in fastboot, do not issue the fastboot reboot command. you need to manually power off the phone by keeping the power button pressed till it powers off
kenboyles72 said:
after you flash recovery in fastboot, do not issue the fastboot reboot command. you need to manually power off the phone by keeping the power button pressed till it powers off
Click to expand...
Click to collapse
I tried this, same result
ak14523 said:
I tried this, same result
Click to expand...
Click to collapse
As the other posted mentioned you have to fastboot flash twrp (2.8.6.0) then power off phone and use volume down + power button combo to get to recovery. Its flashing but if you boot to OS it will be overwritten by CM recovery hence booting directly will alleviate that
Boot into os, enable dev options by tapping the build number a bunch of times in settings-about phone section, go back and go into settings-developer options, make sure "update cyanogen recovery" is unchecked. Flash recovery again, and like people have said, power off the phone and use volume down and power buttons together to boot into recovery.
Thanks for the quick replies guys. I have tried all the above s and none of them have worked
Should I try unlocking the bootloader again?
I recommend going to this guide and following it closely: http://forum.xda-developers.com/oneplus-one/general/guides-bacon-timmaaas-how-to-guides-t2839471
As for which version of TWRP to use, I recommend this version: https://www.androidfilehost.com/?fid=24391638059059048