This is an unofficial build of Slim6 and Slim7 for Neuxs 7 (2012).
**Click the above logo to visit the official SlimRoms siteRelease notes:
2017/07/16
The latest Slim7 Build 1.2 Android-7.1.2_r23 (NHG47O) is out but AFH is under maintenance. Will upload later...
2017/06/16
The latest Slim7 Build 0.27 Android-7.1.2_r17 (NJH47B) is out now.
History
2017/05/19
The latest Slim7 Build 0.24 Android-7.1.2_r8 (N2G47O) is out now.
2017/05/7
Have some time to update the Slim this weekend. The latest Slim7 Build 0.22 Android-7.1.2_r8 (N2G47O) is out now.
2017/03/11
The latest Slim7 Build 0.15 Android-7.1.1_r26 (NOF27C) is out now. After finished the development of MediaTek, I have some time to take a look at the PerformanceControl app. The apply at boot feature is fixed. Settings are preserved after reboot now. Cheers!
2017/02/17
The latest Slim7 Build 0.12 Android-7.1.1_r21 (NOF26W) is out now. I have tested a bit longer this time. The SlimLauncher (modified from Launcher 3) behaves the same as Carbon. It was not prepared to run in landscape (was for a phone) so the app drawer button is not handled properly in landscape. See if there will be a fix in the next build.
2017/01/21
This is the build I promised. I have tested for a while. It is slim as before and approaching complete.
The Slim7 Build 0.8 Android-7.1.1_r9 (N6F26Q) is out now. Cheers!
2016/11/19
Build 1.12 Android 6.0.1_r74 (MOB31K) is out now.
2016/10/7
Build 1.6 Android 6.0.1_r66 (MOB31E) is out now.
2016/9/17
Build 1.3 Android 6.0.1_r66 (MOB31E) is out now.
2016/9/3
Weekly Build 1.1 (Android 6.0.1_r61) is out now.
2016/8/27
Build 1.0 (Android 6.0.1_r61) is out now.
2016/8/20
Alpha 0.10 (Android 6.0.1_r61) is out now. Cheers!
2016/8/13
Alpha 0.9 (Android 6.0.1_r61) is out now. Performance Control is upgraded to 2.1.6 with drawer view UI. Cheers!
2016/8/6
Alpha 0.8 (Android 6.0.1_r61) is out now. Some reports that the last build didn't stable. The voltage tables are reverted.
2016/7/31
Try to keep up with the official weekly. Alpha 0.7 is out now.
In this build, the customizations of UI are included. The kernel default voltages of CPU and GPU are adjusted to reduce the power consumption. Hoping it would work for most of the devices. Cheers!
2016/7/25
This is the latest Slim6 Alpha 0.6. I have built SlimRoms since JB. It is known to be the slimmest and provide all the necessary features. I have included the tweaks which I have been making for Omni6 and DC-kernel. After testing it for a few days, I decided to share it. It is quite stable and responsive. It would be my new daily driver now. Cheers!
Change log: :victory:
Code:
Official [URL="https://slimroms.org/"]Change log[/URL]
[COLOR="Blue"]2017/07/16[/COLOR]
- Slim7 Build 1.2, AOSP 7.1.2_r23 (NHG47O)
- fix a bug in PerformanceControl
[COLOR="Blue"]2017/06/16[/COLOR]
- Slim7 Build 0.27, AOSP 7.1.2_r17 (NJH47B)
[COLOR="Blue"]2017/05/19[/COLOR]
- Slim7 Build 0.24, AOSP 7.1.2_r8 (N2G47O)
- fix a bug in Wifi scan
[COLOR="Blue"]2017/05/7[/COLOR]
- Slim7 Build 0.22, AOSP 7.1.2_r8 (N2G47O)
[COLOR="Blue"]2017/03/11[/COLOR]
- Slim7 Build 0.15, AOSP 7.1.1_r26 (NOF27C) beta
- Fix the apply at boot in PerformanceControl.
[COLOR="Blue"]2017/02/17[/COLOR]
- Slim7 Build 0.12, AOSP 7.1.1_r21 (NOF26W) beta
[COLOR="Blue"]2017/01/21[/COLOR]
- Slim7 Build 0.8, AOSP 7.1.1_r9 (N6F26Q) alpha
[COLOR="Blue"]2016/11/19[/COLOR]
- Slim6 Build 1.12, AOSP 6.0.1_r74 (MOB31K)
[COLOR="Blue"]2016/10/7[/COLOR]
- Slim6 Build 1.6, AOSP 6.0.1_r66 (MOB31E)
[COLOR="Blue"]2016/9/17[/COLOR]
- Slim6 Build 1.3, AOSP 6.0.1_r66 (MOB31E)
[COLOR="Blue"]2016/9/3[/COLOR]
- Slim6 Build 1.1, AOSP 6.0.1_r61 (MOB30Z)
[COLOR="Blue"]2016/8/27[/COLOR]
- Slim6 Build 1.0, AOSP 6.0.1_r61 (MOB30Z)
[COLOR="Blue"]2016/8/20[/COLOR]
- Slim6 Alpha 0.10, AOSP 6.0.1_r61 (MOB30Z)
[COLOR="Blue"]2016/8/13[/COLOR]
- Slim6 Alpha 0.9, AOSP 6.0.1_r61 (MOB30Z)
- Performance Contorl: 2.1.6 with Drawer view UI
- Performance Contorl: better support with the built-in root access
[COLOR="Blue"]2016/8/6[/COLOR]
- Slim6 Alpha 0.8, AOSP 6.0.1_r61 (MOB30Z)
- Revert the voltage values in the Kernel. Some device might not working...
[COLOR="Blue"]2016/7/31[/COLOR]
- Slim6 Alpha 0.7, AOSP 6.0.1_r52 (MOB30R)
- A new set of voltage values in the Kernel to reduce power consumption.
- Personalisation of UI
[COLOR="Blue"]2016/7/25[/COLOR]
- Slim6 Alpha 0.6, AOSP 6.0.1_r52 (MOB30R)
- equipped with the DC-kerenel
- All tweaks from my Omni6
Know issues:
1. Picture taken by built-in Camera limited to preview quality. (Can't connect to the buffer of Camera HAL blob)
2. Please report
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloads: :highfive:
Host: AFH Slim6 AFH Slim7 mirror: 百度网盘
Gapps: ** We have a 650M system partition but SlimRoms can accept nano or pico Gapps.
All those with nano and pico Gapps are recommended. (eg. OpenGapps)
** latest TWRP is recommended.
Slim6 has root access. You may also flash the latest systemless SuperSU(2.6x or above) from @Chainfire in recovery.
Source:
kernel & device trees on Github
Credits: :good:
** The SlimRoms team.
** Dmitry Grinbeg for his work making our life easier.
** All those who donate and/or help the developers. Giving us the resources and reason to carry on.
Donations: :angel:
Edit: just looked again at OP, see the su I need to use. Will try that.
Flashed this today, running really smooth until I updated supersu rebooted and was stuck at logo. Is this ROM prerooted?
melp57 said:
Edit: just looked again at OP, see the su I need to use. Will try that.
Flashed this today, running really smooth until I updated supersu rebooted and was stuck at logo. Is this ROM prerooted?
Click to expand...
Click to collapse
slim6 is pre-rooted.. enable root in Developer Options..
This is the weekly update. Slim6 Alpha 0.7 is out. cheers!
I was curious if DC kernel works with this has anyone tried it?
Sent from my LG-VS985 using Tapatalk
kend0g said:
I was curious if DC kernel works with this has anyone tried it?
Sent from my LG-VS985 using Tapatalk
Click to expand...
Click to collapse
Already mentioned in post#1. This ROM is equipped with my DC-kernel.
The weekly Slim6 Alpha 0.8 (Android 6.0.1_r61) is out. cheers!
will f2fs work?
wow... fast updates
supertiger1234 said:
will f2fs work?
Click to expand...
Click to collapse
Works for me (cache and data).
BTW: great rom, not as fast as SlimKat, but looks very promising. Thanks
supertiger1234 said:
will f2fs work?
Click to expand...
Click to collapse
working for me too.. data and cache in f2fs
how is this with slimgapps?
ibrokemypie said:
how is this with slimgapps?
Click to expand...
Click to collapse
I can't find the slimgapps for MM. The old one is not compatible.
The weekly update Alpha 0.9 is out. Cheers!
daniel_hk said:
I can't find the slimgapps for MM. The old one is not compatible.
The weekly update Alpha 0.9 is out. Cheers!
Click to expand...
Click to collapse
Many thanks for your work.. The first newer Rom (since the LP garbage) which runs more smoothly on this old device... I'll never understand, why a quadcore could be so slow, but with this slim-Version it is useable enough
Cheers,
SP
The weekly update Alpha 0.10 is out. Cheers!
Slim6 Build 1.0 is out now!
daniel_hk said:
Slim6 Build 1.0 is out now! [/QUOTE
nice work my device running like a charm many thanks
Click to expand...
Click to collapse
Work fine on my tilapia with supersu 2.76 and xposed. Thanks!
Weekly Build 1.1 (Android 6.0.1_r61) is out now.
Downloaded SuperSu from the app store and let the app flash an update via recovery, which worked. But after that I'm stuck in a bootloop
Pris0n said:
Downloaded SuperSu from the app store and let the app flash an update via recovery, which worked. But after that I'm stuck in a bootloop
Click to expand...
Click to collapse
There is no need for supersu... Slimrom has buildin su management...
Gesendet von meinem A0001 mit Tapatalk
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About
From the G+ page:: Welcome to Euphoria-OS where you will be in a state of intense excitement and happiness with your device!
My build: This is little side project that might grow into something bigger if time permits. EOS is successor of famous Mahdi ROM. I always wanted to try it, but nobody would do it while we were on KitKat. So here it is, built completely from AOSP sources, using CM device tree.
XDA:DevDB Information
Euphoria-OS Note 3, ROM for the Samsung Galaxy Note 3
Contributors
encho
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2015-04-01
GPL/Sources
Kernel
Device tree
EOS
Created 2015-02-06
Download
ROM
Gapps
Slim gapps
Banks gapps
TK Gapps
Open Gapps
Links
Google+ page
Notes
Superuser built in - go to Developer settings to enable. SuperSu available. Rom uses 400dpi as default, might change that.
Changelog and other stuff here. Some day. Or not.
Changelog (after all)
Euphoria-OS-1.0-hlte-20150205 - first build - beta quality
Euphoria-OS-1.0-hlte-20150306- second build - alpha quality
Euphoria-OS-1.0-hlte-20150309 - third - you know
Euphoria-OS-1.0-hlte-20150313 - beta again
Euphoria-OS-1.0-hlte-20150326 - totally bad build - qcom drivers issues
Euphoria-OS-1.0-hlte-20150401 - there you have it - stable build, if anything in this world can be stable. I'm sure some of you will find something that's broken, I couldn't, lol. Fixed drivers, using EOS sources for everything qcom related. Have I mentioned it is stable?
Euphoria-OS-1.1-hlte-20150415/16 - Euphoria 1.1, based on LP 5.1 - saber/linaro
Euphoria-OS-1.1-hlte-20150422/23 - Euphoria 1.1, LP 5.1.1 linaro/saber
Euphoria-OS-1.1-hlte-20150501 - Euphoria 1.1, LP 5.1.1 linaro, slim camera
Euphoria-OS-1.1-hlte-20150528 - Euphoria 1.1, LP 5.1.1_r3 linaro+archi, arter's bluetooth+audio fixes
Euphoria-OS-1.1-hlte-20150604 - Euphoria 1.1, now hltespr as separate build.
Euphoria-OS-1.1-hlte-20150611 - Mainly stability fixes and upstream changes.
Euphoria-OS-1.1-hlte-20150616 - Upstream changes, navbar, theming and stability fixes. Also includes emergency call fix.
Euphoria-OS-1.1-hlte-20150624 - Upstream changes, includes custom kernel SD card r/w fix. Lots of theme chooser updates and optimizations - Fixed blacklisting private numbers - Merged in translations from CM - Dynamic tiles (ADB, IME selector, Root access, Next alarm)
Euphoria-OS-1.1-hlte-20150703 - Upstream changes,.
Euphoria-OS-1.1-hlte-20150716 - Upstream changes, new kernel. Built with Uber TC.
Euphoria-OS-1.1-hlte-20150803 - Upstream changes
Euphoria-OS-1.1-hlte-20150907 - Upstream changes, theme fixes, stagefright fixes, new features. Includes new kernel based on temasek's.
Euphoria-OS-1.1-hlte-20150918 - Euphoria rebuilt, now with slim kernel.
Euphoria-OS-1.1-hlte-20150925 -Maintenance release, reverting few kernel commits that might cause lags. Compiled with UBERTC 4.8+4.9.
Euphoria-OS-1.1-hlte-20151001 -Upstream changes and fixes.
Euphoria-OS-1.1-hlte-20151012 - Final LP build.
Nice.
Ill update after i test
Glad to see a new ROM here. Compatabilty with the 900T? also maybe some screenshots? I'd be happy to contribute if you need...
kevp75 said:
Nice.
Ill update after i test
Click to expand...
Click to collapse
Got a recommended package of gapps?
tank120 said:
Glad to see a new ROM here. Compatabilty with the 900T? also maybe some screenshots? I'd be happy to contribute if you need...
Click to expand...
Click to collapse
It is universal, all hlte variants. Warning: this is my private testing rom at this stage, no bug reports or feature requests. Well, you can ask, I'll just ignore you.
kevp75 said:
Got a recommended package of gapps?
Click to expand...
Click to collapse
Nope. Just tested it with PA, works fine.
encho said:
Nope. Just tested it with PA, works fine.
Click to expand...
Click to collapse
Thanks bud. Gonna test once downloaded. Probably with lk
kevp75 said:
Thanks bud. Gonna test once downloaded. Probably with lk
Click to expand...
Click to collapse
You never rest, do you?
Have to go now, but before I leave, just a quick reminder:
Superuser built in - go to Developer settings to enable.
Uses 400dpi as default, use texdroider from the store if annoyed.
Thanks
encho said:
You never rest, do you?
Have to go now, but before I leave, just a quick reminder:
Superuser built in - go to Developer settings to enable.
Uses 400dpi as default, use texdroider from the store if annoyed.
Click to expand...
Click to collapse
All day
Had an issue after flashing (systemui fc), but will try again tomorrow. I gotta mod gapps installer anyways.
Wow!!!need to flash this rom
austino pele said:
Wow!!!need to flash this rom
Click to expand...
Click to collapse
Don't, it might be too fast. [emoji41]
full wipe and just installed....got android is upgrading....and when playing music and surf on internet, got gggrrrrrr.....but solved with sound fix from cm11...
rayman95 said:
full wipe and just installed....got android is upgrading....and when playing music and surf on internet, got gggrrrrrr.....but solved with sound fix from cm11...
Click to expand...
Click to collapse
Can you give me example when exactly this happens, I have no such issues.
android is upgrading is arrived just after the reboot after the flash......for the music when I play music and if I run browser when I turn the screen to vertical it's making ggggr noise but resolved with sound patch .
I really do love mahdis works ! Thank you so much for your hard work. And bringing an amazing rom to our device.
Only got my note last week and all I have installed so fast is your work. And loving it to :good:
Thank you so much for your work. Great rom. Thanks encho..
Sent from my hlte using Tapatalk
Thank you all. Can anyone confirm that sounds issue, is it phone variant related?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SlimRoms is a custom android operating system. The main goal is to offer users a slimmed down but still feature rich alternative to other android operating systems.
The entire SlimTeam work together to bring you this tailor-made beauty straight from Android Open Source Project (AOSP) source code.
All of the sources can be publicly viewed through Github and you can stop by the public Gerrit to submit patches of any type.
SlimLP is the project name for SlimRoms based on Android 5.0 and offers the following original features:
Custom Shortcuts. Everywhere.
Hardware keys, Navigation Ring, Navigation Bar, Lockscreen, Tiles, Notifications etc. - We've got you covered.
System-Wide Keyboard Controls
Rotation, cursor control, optional emoticions, etc. - You'll be tapping away to your heart's content.
SlimCenter (Coming Soon)
Downloads, contact information, system app removal. - More fun than you can shake a stick at.
Camera Features
Trueview, Smart Capture. - Capture life moments with ease.
Important links:
SlimRoms.net - The official webpage where you find everything you need to know about SlimRoms.
Downloads - Download the rom, gapps and other addons. Temporarily:
ROM:
Old builds (until 08/22)
New builds (after 08/22)
GAPPS:
Official Slim GApps
Installation instructions
maultasche said:
Sure =)
1. make sure you are on a recovery which can flash .img files. I recommend TWRP 2.8.5.0
2. While in recovery go to install, change .zip to img on the bottom right, choose the image and flash the needed recovery which you can find here
3. reboot your phone into recovery
4. F2FS is not mandatory - the install.zip formats /system automatically into F2FS. But as aaz03 recommended to get full feature of F2FS and the ROM format /cache and /data to F2FS as well. You can do that in recovery with wipe - advanced wipe - select cache - click on repair or change file system - click on change file system - choose F2FS and confirm with a swipe. Do that as well for data. But as mentioned you can run /cache, /data in ext4 as well.
5. Flash gapps and you're done.
If you decide to format /data into F2FS make sure you backup everything in internal storage as you'll lose those files etc. in there
Click to expand...
Click to collapse
But what if i don't want to use F2FS? Can you please make a ext4 rom?
FOR GOD'S SAKE F2FS IS NOT MANDATORY, THE ROM JUST SUPPORTS IT YOU DON'T HAVE TO FORMAT EVERYTHING TO F2FS TO USE THIS ROM. YOU CAN PERFECTLY USE IT WITHOUT DOING ANY CHANGE TO PARTITIONS! EXT4 IS PERFECTLY WORKING
Click to expand...
Click to collapse
Latest Changelog - For now check Gerrit for changelog.
FAQ - The most frequent asked questions with answers.
Get in touch! - Contact SlimRoms at these places if you have questions, requests or feedback.
Google+
Twitter
Facebook
Kernel source
Disclaimer: SlimRoms or the builder of the rom are not responsible for any damages to your device.
Thanks to
SlimRoms for their awesome rom
Archidroid for his optimizations and his kernel
CyanogenMod for various sources
Derteufel for his lollipop sources
BitSyko and LayersTeam for RRO/Layers theming
SdtBarbarossa for his fully F2FS compatible recovery
NamelessRoms for various sources
HboHD for his awesome work on porting ArchiKernel to our device
And all those who helped me to learn to build in any way
XDA:DevDB Information
SlimLP, ROM for the Samsung Galaxy S III I9305
Contributors
aaz03
ROM OS Version: 5.1.x Lollipop
Based On: Slim
Version Information
Status: Beta
Created 2015-03-07
Last Updated 2015-06-15
Reserved
Changelog:
Alpha builds
-09 June 2015 : SlimLP 5.1.1 Alpha released
-14 June 2015 : SlimLP 5.1.1 Alpha Build 2 released: All previous bugs fixed
-15 June 2015 : SlimLP 5.1.1 Alpha Build 3 released: Using UBER Toolchains and Archi's optis V4
-17 June 2015 : SlimLP 5.1.1 Alpha Build 4 released: Added Boeffla , ZZmoove Governors to stock kernel, build from clean .ccache
-22 June 2015 : SlimLP 5.1.1 Alpha Build 5 released: BFQ v7r8 fully working
-02 July 2015 : SlimLP 5.1.1 Alpha Build 6 released: ArchiKernel Opti
Beta Builds
-09 July 2015 : SlimLP 5.1.1 Beta Build 1 released: mdnie tweaks (not sure if working) + all the updates from official slim
-12 July 2015 : EXPERIMENTAL F2FSlimLP 5.1.1 Beta released : Full F2FS-only rom !
-14 July 2015 : SlimLP 5.1.1 Beta Build 2 released: Stable release with F2FS or ext4 , UBER 5.1 for kernel
-19 July 2015 : SlimLP 5.1.1 Beta Build 3 released: Full RRO/Layers theme support , SIO Scheduler as default, intake amperage changed to [email protected] & [email protected] for faster charging
-21 July 2015 : SlimLP 5.1.1 Beta Build 4 released: Layers theming patched for Settings, SystemUI, Contacts, Dialer and Settings
-26 July 2015 : SlimLP 5.1.1 Beta Build 5 released: Google Play Services FC fixed, PIPE & Graphite Rom optimizations
-13 August 2015 : SlimLP 5.1.1 Beta Build 6 released :Stock kernel perfectly working, ART & Bionic Optimizations
-15 August 2015 : SlimLP 5.1.1 Beta Build 7 released :Settings FC fixed, RRO/layers fixed, Zzmoove v1.0 beta 8
-22 August 2015 : SlimLP 5.1.1 Beta Build 8 released : Replaced Liquify Optimizations by Archidroid v4.1, build from clean ccache (will take more time), build with user instead of userdebug (better for battery)
-31 August 2015 : SlimLP 5.1.1 Beta Build 9 released : Use dlmalloc for bionic, art Optimizations, L1/L2 cache optimizations
- 01 September 2015 : SlimLP 5.1.1 Beta Build 10 released : Art dex-preoptimization, optimized sqlite, rro fix for frameworks/base, added gpu control to kernel
- 06 September 2015 : SlimLP 5.1.1 Beta Build 11 released : slim updates
- 13 September 2015 : SlimLP 5.1.1 Beta Build 12 released : skia optimized, vendor optimized for art, ndk optimized, libcore optimized
- 25 September 2015 : SlimLP 5.1.1 Beta Build 13 released : updated to slimLP beta0.8 + updated kernel toolchain to UberTC 5.2
- 11 October 2015 : SlimLP 5.1.1 Beta Build 14 released: updated to android 5.1.1 R24, updated Kernel Source and SMDK common source
- 24 October 2015 : SlimLP 5.1.1 Beta Build 15 released: updated kernel source, cleaned kernel, all the changes from SlimRoms
- ?? November 2015 : SlimLP 5.1.1 Beta Build 16 incomng: wm8994 sound upgrades from latest samsung kernel + Layers 3.0 support + Slim 0.12
Caution : To read before flashing
Important: Wtf is wrong with this rom?
No error that i know about
My recovery isn't working with F2FS HELP
Install any TWRP recovery with .img support and then flash the AAAWESOME recovery of SdtBarbarossa here
What do we already have in addition to a simple rom?
In rom:
- SlimLP
- Uber Toolchains 4.9
- Archi's optimizations V4.1
- Liquify, PIPE , Graphite build optimizations
- Art Optimizations
- Sqlite Optimized
- 3g/lte data is working
- Xposed compatibility
- RRO/Layers/Overlay themes compatibility
- F2FS for /system
- Bionic Optimizations for Cortex A9
In stock kernel:
- ArchiKernel 's optimizations
- Uber Toolchains 5.1
- Full F2FS support (/system , /data and /cache)
- Cpu UV
- ZZmoove governors (v1.0b8) + BFQ (v7r8) & SIO schedulers
- Boeffla Sound Engine 1.6.7
What will come soon?
- MOAR BUILDS
Awesome mate. I'm a big fan of slimroms!! I'll keep a look out for when the rom is ready. Let me know if you want anything tested. :good:
Can't wait!!!! Great and thanks, if not for the job yet, for the intention!
Sent from my GT-I9305 using XDA Free mobile app
Fingers crossed this one will actually work! Any idea of an ETA?
slimrom is the best, cant wait
Could you say what is the base for this rom? Why exactly you chosen to compile SlimLP, not some other more feature-packed rom? [emoji14]
Just wondering and looking forward to testing a cm based slim lp?!? Sounds interesting and new for me ...can you share your local manifest? Are your sources on github?
can´t wait to test but will the cm12 musicplayer and musicfx be in this rom?
My sources aren't on github.com for the simple reason that I can't upload it, my upload rate is 100kb/s so imagine the time it'd get for 20gb... But I'll upload my local manifest. It'll be based on cm12 as atm we don't have an aosp base so I'll do with what I got.
Why slim ? Because we don't have slim on our device and it's known to work well with optimizations
EDIT: -08 March 2015 : Build started, pray for it
aaz03 said:
My sources aren't on github.com for the simple reason that I can't upload it, my upload rate is 100kb/s so imagine the time it'd get for 20gb... But I'll upload my local manifest. It'll be based on cm12 as atm we don't have an aosp base so I'll do with what I got.
Why slim ? Because we don't have slim on our device and it's known to work well with optimizations
EDIT: -08 March 2015 : Build started, pray for it
Click to expand...
Click to collapse
nice. hope its as stable as on my galaxy tab 2. looking forward to test soon :fingers-crossed:
aaz03 said:
My sources aren't on github.com for the simple reason that I can't upload it, my upload rate is 100kb/s so imagine the time it'd get for 20gb... But I'll upload my local manifest. It'll be based on cm12 as atm we don't have an aosp base so I'll do with what I got.
Why slim ? Because we don't have slim on our device and it's known to work well with optimizations
EDIT: -08 March 2015 : Build started, pray for it
Click to expand...
Click to collapse
it is uploading or you are building this?
However, SlimLP is less feature-packed than any other ROMs. And I somehow prefer to have aaaaall possible options to configure my phone
I got a Optipop build finished from sources but it doesn't boot...does not even pass the samsung boot logo. I think its because of the kernel, which is DerTeufels CM kernel without changes. Any idea what I have to change and/or which kernel I could/should try? Cm-12-Boeffla 3.0 alpha 9 I have already tried, but with same result ....
One option is Boeffla 3.0 and the other is latest PSN kernel. These two are working for different roms
Well f*ck ,seems like it doesn't found the linux/videodev.h while compiling hwcomposer, i installed libv4l-dev and done the trick to use the new replacement videodev version but still not
when you gonna upload the rom I'm waiting anxiously. @aaz03
When I will find Wtf is going wrong with videodev.h
EDIT: Changelog updated , keep an eye on it i'll update as soon I have news.
SOON...
[ROM] 6.0.1_r46 Android MarshMallow Pure AOSP for Google Nexus 7 2012 WIFI CodeName Grouper
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
INSTRUCTIONS,
1. UPDATE RECOVERY to TWRP 3.0.0-0
2. FACTORY RESET (needed if you have LP or other custom LP or MM Roms)
3. Download ROM Build 06/07
4. Gapps 6.0
5. Root (Optional) Direct Download
6. Optionally,to speed up device,consider to flash ParrotMod
7. Reboot and enjoy...
CREDITS,
AOSP/Google,Dmitry Grinberg for great initial support on build
Bugs
During Google Account registration if you choose Restore device phone return to same screen.After that choose Configure as new device and restore start normally!!!
Stock rom browser generate random soft reboot if you enable Location sharing with device only mode in Location options!!!
Changelog
Beta Release 0.1 Build 10/15
Initial support for N7 2012 WIFI on AOSP MarshMallow
Kernel compiled with Christopher83 4.9 arm toolchain based on google asus 3.1.10 lollipop-mr1 and kernel patch of Dmitry Grinberg
Enable sparsemem option on kernel to optimize memory managemnt and free up memory quickly
Add some options to speed up first boot and dex2oat compilation
Beta Release 0.2 Build 10/19
Possible fix to random sound and autorotate issue
Beta Release 0.3 Build 10/29
Kernel 3.1.x compiled with last 4.9 toolchain
Possible fix to autorotate sound and GPS bug and random sensor problems (test needed!!)
Beta Release 0.4 Build 10/30
Kernel 3.1.x compiled with last 4.9 toolchain reworked to avoid random freezes after deep sleep
Compiled with latest commits of AOSP sources 6.0.0_r1
New BootAnimation based on Nexus factory Images MM
Possible fix to autorotate sound and GPS bug and random sensor problems (test needed!!)
Beta Release 0.5 Build 10/31
Fix NFC lost on Settings--> Other
Beta Release 0.6 Build 01/12
Kernel 3.1.x compiled with last 4.9 toolchain reworked with f2fs support
Compiled with latest commits of AOSP sources 6.0.1_r10)
Beta Release 0.7 Build 02/15
Kernel 3.1.x compiled with last 4.9 toolchain reworked with f2fs support
Compiled with latest commits of AOSP sources 6.0.1_r16)
Beta Release 0.8 Build 03/08
Kernel 3.1.x compiled with last 4.9 toolchain reworked with f2fs support
Compiled with latest commits of AOSP sources 6.0.1_r17
Update to security bulletin 1st march 2016
[/COLOR]
Beta Release 0.9 Build 04/15
Kernel 3.1.x compiled with last 4.9 toolchain reworked with f2fs support
Compiled with latest commits of AOSP sources 6.0.1_r24
Update to security bulletin 1st April 2016
Added reboot shortcut to developer options
[/COLOR]
Beta Release 1.0 Build 05/07
Kernel 3.1.x compiled with last 4.9.2 toolchain reworked with f2fs support
Compiled with latest commits of AOSP sources 6.0.1_r43
Update to security bulletin 1st May 2016
Added patch to prevent Gapps Error on first boot.Thanks to Rock-86
[/COLOR]
Beta Release 1.1 Build 06/07
Kernel 3.1.x compiled with last 4.9.2 toolchain reworked with f2fs support
Compiled with latest commits of AOSP sources 6.0.1_r46
Update to security bulletin 1st Jun 2016
Sources
Google
Kernel tree
I read from the other thread that sound / microphone isn't working. Is sound fixed for this rom?
Root is not working after flashing SuperSU 2.52 zip.
Anyone with a solution?
Error updating binary script on that gapps.
Sent from my Nexus 5 using Tapatalk
tcat007 said:
Error updating binary script on that gapps.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
go to mount and delete flag on system then retry
yogesh1998 said:
Root is not working after flashing SuperSU 2.52 zip.
Anyone with a solution?
Click to expand...
Click to collapse
on my device with my build works fine
dookie23 said:
I read from the other thread that sound / microphone isn't working. Is sound fixed for this rom?
Click to expand...
Click to collapse
seems mic problem only in google app i'm investigating
Thank you a lot !!!
But gapps installation failed.
Bryandu13 said:
Thank you a lot !!!
But gapps installation failed.
Click to expand...
Click to collapse
wipe all
update recovery to twrp 2.8.7.0
in mount if you have a flag on system remove it
then install rom,gapps and supersu
works fine
Thanks for this
Fully working for me. SuperSu. All.
Thank you
i updated gapps links for broken mic auth on gogle now
https://www.androidfilehost.com/?fid=24052804347833783
Thank your for the rom!
vocoderism said:
wipe all
update recovery to twrp 2.8.7.0
in mount if you have a flag on system remove it
then install rom,gapps and supersu
works fine
Click to expand...
Click to collapse
It worked !
Thanks for help and fast reply !!!
How can I change the default launcher? I installed google now launcher but it says "clear defaults of your launcher", but I can't. Settings doesn't have a section for Launcher anymore.
everesee said:
How can I change the default launcher? I installed google now launcher but it says "clear defaults of your launcher", but I can't. Settings doesn't have a section for Launcher anymore.
Click to expand...
Click to collapse
What gapps did you install?
Inviato dal mio Nexus 4 utilizzando Tapatalk
Thank's for this Job !!! this rom and mod sound Dolby Digital Plus Awesome Nexus 7 2012:good:
http://forum.xda-developers.com/note-4/themes-apps/audio-mod-dolby-digital-plus-note-4-t3075871
laugeek57 said:
Thank's for this Job !!! this rom and mod sound Dolby Digital Plus Awesome Nexus 7 2012:good:
Click to expand...
Click to collapse
Mod sound? Link please, I'm getting no sound at all. Otherwise working as good or better than when I bought this thing.
Edit: Looks like dnd was on by default, all sound working well now. Camera doesn't seem to work, but Camera Zoom does (and who uses the n7 camera anyway). Layers work. So far so good!
vocoderism said:
Kernel compiled with Christopher83 4.9 arm toolchain based on google asus 3.1.10 lollipop-mr1 and kernel patch of Dmitry Grinberg
Enable sparsemem option on kernel to optimize memory managemnt and free up memory quickly
Click to expand...
Click to collapse
Just FYI, if you provide a binary of a kernel you must offer sources as per GPL
I do not need it (I am done with N7 work) but you are otherwise on shaky legal ground
dmitrygr said:
Just FYI, if you provide a binary of a kernel you must offer sources as per GPL
I do not need it (I am done with N7 work) but you are otherwise on shaky legal ground
Click to expand...
Click to collapse
Sure i upload tomorrow on github
Inviato dal mio Nexus 4 utilizzando Tapatalk
This is an unofficial build of DirtyUnicorns v-10.x for Neuxs 7 (2012).
**Click the above logo to visit the official DirtyUnicorns siteRelease notes:
2016/9/9
Dirty Unicorns v10.6 Android 6.0.1_r68 (MTC20L). This is the FINAL DU-10.x.
As a bonus, I uploaded the first DU-11.0 for those interested to test... See post #96
2016/8/3
Dirty Unicorns v10.4 Android 6.0.1_r62 (MTC20F).
2016/7/7
This is the Dirty Unicorns v10.3 update.
2016/6/9
Dirty Unicorns merged Android 6.0.1_r46 (MOB30M) now.
2016/5/15
This is the Dirty Unicorns v10.2. DU merged Android 6.0.1_r43 now.
2016/4/29
This is the Dirty Unicorns v10.1. In this build, I modified the settings of activity manager and service. Hoping to improve the overall performance and memory management. The ApkPermission script is updated. Hoping to aware of any combination of flashing. Cheers!
2016/4/16
This is an version update. DU merged Android 6.0.1_r30 now.
HISTORY:
2016/4/6
This is an version update. DU merged Android 6.0.1_r24 now. The native AOSP "Tap to wake" (DT2W) Display settings is implemented. For those who want to use other performance control apks (eg. TricksterMod), you can still enjoy the DT2W feature. Cheers!
Note: Don't enable set on boot of DT2W in PerformanceControl if you want the native AOSP settings to take over.
2016/3/31
The current Gapps have permission issues again. Flash this View attachment gapps-perm-patch.zip after the ROM and Gapps would fix the permission of Gapps at reboot. This patch is universal. If your ROM support init.d, it would work for you too.
Theory: I didn't want to change the original security of AOSP so I put an init.d script to fix the permission at start. It would be the same as the assignment of permission in App settings. The default security and permissions hierarchy is preserved. I think this is the better way.
However, the current growth of ROM and Gapps delay the Package Manager service (which is for permission granting). A wait loop is now added to the script. It would wait for the Package Manage service now.
2016/3/29
NFC apk is missing in DU. I prepared the View attachment du-nfc-patch-20160329.zip. Flash it in recovery will get the NFC back.
2016/3/28
In this build, the Power HAL is adjusted for the O/C frequencies. The latest kernel patch and DT2W adjustments are included. A few bugs are fixed. Cheers!
2016/3/20
The last DU for Tilapia fail to detect the SIM. A library is missing. There is a patch in my Omni6 thread. It would fix this issue.
2016/3/12
I have been building DU for other devices for sometimes. It feels quite good and balance in many ways. I long for the Official (or Unofficial) build too. I tested building DU late last year. There were still some glitches which required quite a few patches so I picked Omni. At that time Omni was comparatively stable. Omni is good but I want to try something new for myself after a few months. I think DU is ready now so its time to kick my slothful ass for a new daily driver. DU is the first (I think) one merging 6.0.1_r22. Cheers!
Note:If you are from Omni (or AOSP based ROM?) like me, you probably don't needed to do factory reset. Just wipe cache/dalvik and your apps current state is most likely preserved.
Change log: :victory:
Code:
Official Gerrit [URL="http://gerrit.dirtyunicorns.com/#/q/status:open"]Change log[/URL]
[COLOR="Blue"]2016/9/9[/COLOR]
- DU v10.6, AOSP 6.0.1_r68 (MTC20L)
- and DU v11.0 AOSP 7.0.0_r4 (NRD90S) alpha test...
[COLOR="Blue"]2016/8/3[/COLOR]
- DU v10.4, AOSP 6.0.1_r62 (MTC20F)
- New set of voltage values for CPU and GPU in kernel
- New boot animation
[COLOR="Blue"]2016/7/7[/COLOR]
- DU v10.3, AOSP 6.0.1_r46 (MOB30M)
[COLOR="Blue"]2016/6/9[/COLOR]
- DU v10.2, AOSP 6.0.1_r46 (MOB30M)
[COLOR="Blue"]2016/5/15[/COLOR]
- DU v10.2, AOSP 6.0.1_r43 (MOB30J)
[COLOR="Blue"]2016/4/29[/COLOR]
- DU v10.1, AOSP 6.0.1_r30 (MOB30D)
- ActivityManager: Modified the settings to improve performance and memory management.
- ApkPermission update, permission would be assigned only once when Gapps is first found.
[COLOR="Blue"]2016/4/16[/COLOR]
- Latest DU source, AOSP 6.0.1_r30 (MOB30D)
[COLOR="Blue"]2016/4/6[/COLOR]
- Latest DU source, AOSP 6.0.1_r24 (MHC19Q)
- Settings: Implement the native AOSP "Tap to wake" (DT2W) settings.
- ApkPermission update, wake for Package Manager start before granting permission
- kernel: Adjust the initial value of DT2W
- Tegra3 Settings: fix a bug in frequency settings
[COLOR="Blue"]2016/3/28[/COLOR]
- Latest DU source, AOSP 6.0.1_r22 (MHC19J)
- Tilapia: Reinstate the missing library for SIM access
- Camera: Fix the crash in video recording. Picture taken still limited to preview quality...
- Power HAL: Adjust with the O/C frequencies
- Power HAL: Add the feature settings. May adopt the built-in DT2W settings later.
- kernel: patches in DT2W
- kernel: New settings for O/C and LP core
- Tegra3 Settings: Fix a bug of potential crash
[COLOR="Blue"]2016/3/12[/COLOR]
- Latest DU source, AOSP 6.0.1_r22 (MHC19J)
- All DU's cool stuffs. Change log for v.10.0 is not yet available.
- All fixes in my [URL="http://forum.xda-developers.com/nexus-7/development/rom-omnirom-6-0-1-homemake-t3282311"]Omni6[/URL]
- kernel: The latest DC-kernel is equipped
- Tegra3 Settings: PerformanceControl v2.1.5 is included
Know issues:
1. Picture taken by built-in Camera limited to preview quality. (Can't connect to the buffer of Camera HAL blob)
2. Please report
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloads: :highfive:
Host: Android File Host mirror: 百度网盘
Gapps: Banks Gapps is included in DU's site but I didn't try it myself.
** We have a 650M system partition. Only have room for pico Gapps.
All those with pico Gapps is recommended. (eg. OpenGapps)
** latest TWRP is recommended.
DU is already rooted.
If you are from Omni (or AOSP based ROM?) like me, you probably don't needed to do factory reset. Just wipe cache/dalvik and your current state (apps) would mostly likely be resumed.
Source:
kernel & device trees on Github
Credits: :good:
** The Dirty Unicorns team provide us such a good experience.
** Dmitry Grinbeg for his work making our life easier.
** All those who donate and/or help the developers. Giving us the resources and reason to carry on.
Hi Daniel, Thanks for the DU build. I haven't gotten around to flashing it yet but from grouper not having any DU Marshmallow builds, now we have 2 unofficial builds. Looks like the other build http://forum.xda-developers.com/nexus-7/orig-development/rom-dirty-unicorns-grouper-edition-t3334912 is from one of the DU team members, @chasmodo.
Just figured I'd let you know. Thanks again.
Mike T
webdroidmt said:
Hi Daniel, Thanks for the DU build. I haven't gotten around to flashing it yet but from grouper not having any DU Marshmallow builds, now we have 2 unofficial builds. Looks like the other build http://forum.xda-developers.com/nexus-7/orig-development/rom-dirty-unicorns-grouper-edition-t3334912 is from one of the DU team members, @chasmodo.
Just figured I'd let you know. Thanks again.
Mike T
Click to expand...
Click to collapse
Really, I didn't know that. I might drop grouper later then. I was thinking this was the first 6.0.1_r22..
Here is the experimental pool I mentioned earlier. I just upload a test kernel with kexec patch and zRAM support. I don't think I would install MultiROM on my Tilapia recently. There are just too many projects in hand.... Anyone want to test it may report to the DC-kernel thread or PM me.
daniel_hk said:
Really, I didn't know that. I might drop grouper later then. I was thinking this was the first 6.0.1_r22..
Here is the experimental pool I mentioned earlier. I just upload a test kernel with kexec patch and zRAM support. I don't think I would install MultiROM on my Tilapia recently. There are just too many projects in hand.... Anyone want to test it may report to the DC-kernel thread or PM me.
Click to expand...
Click to collapse
I didn't know either until this morning. Also, yours was the first build by about 2 hours. LOL I'll test out the kernel with kexec later and let you know. Thanks.
Mike T
It's running great here c Pico open gapps and @parrotgeek1 universal mod. Is running smooth and fast, only camera issue so far. Thanks for building for grouper
Valsorim said:
It's running great here c Pico open gapps and @parrotgeek1 universal mod. Is running smooth and fast, only camera issue so far. Thanks for building for grouper
Click to expand...
Click to collapse
Does camera crash again in Grouper? Or else?
I have fix it in Tilapia. May be I forgot to put it in Grouper...
daniel_hk said:
Does camera crash again in Grouper? Or else?
I have fix it in Tilapia. May be I forgot to put it in Grouper...
Click to expand...
Click to collapse
Takes pic but when look at it in gallery looks distorted, also fc when switch to video
Trying post pic
Perfect, will flash it later as our internet provider is down! And please don't quit support for grouper as YOUR kernel is included and it's flashable with pico gapps... The build from chasmodo is kinda slow... And definitely i want to try the experimental kernel for MultiROM
As stated by @Valsorim, camera app shows distorted pic and video force closes. I installed opencamera.apk and both camera and video work fine. In Performance Control/Advanced Settings, when I tick/untick Force high end graphics, I get a force close but the setting I choose does stick. I've been setting performance at CPU 204/1500Mhz, GPU446Mhz and so far it seems to be pretty good for me with the new kexec patch test kernel.
Overall, cool rom that's working well. Thanks.
Mike T
As promised a small feedback. I've flashed this as secondary in MultiROM. So your test kernel with kexec hardboot patch's working well on Slimkat 9.1 which is primary. I've OC'ed the CPU slightly with 102/1600 Mhz, GPU 486 Mhz... I've used Trickster for the settings as I'm not sure that the performance control app is sticking the settings after reboot. But I'll investigate about. Not to forget i use the parrotgeek-Mod, so i can confirme it's compatible with your DU-build and the test kernel...
Thank you very much, it's my new daily driver
I also installed this with the previously mentioned Parrotgeek Mod. It's an excellent combination. I haven't used my grouper this much in months. Now to start exploring Fling.
Jaloviina said:
... I've used Trickster for the settings as I'm not sure that the performance control app is sticking the settings after reboot. But I'll investigate about...
Click to expand...
Click to collapse
Extracting/Copying the .apk from system and reinstalling did the trick! Performance Control is working now... About a minute after reboot there's is an information that the root access is granted and the settings are sticked... So no Trickster Mod needed anymore ?
But DT2W is still a bit like the fortune wheel!
Daniel, thanks for today's new build! :good:
Mike T
Didn't noticed, thank you!
Jaloviina said:
Didn't noticed, thank you!
Click to expand...
Click to collapse
You're welcome, I've gotten used to Daniel's threads. He generally doesn't make a post for a new release but instead edits the heading of his thread and adds any changelog in his OP. Maybe he wants to see if we're paying attention. LOL
Mike T
I know but wasn't mindful enough...
webdroidmt said:
You're welcome, I've gotten used to Daniel's threads. He generally doesn't make a post for a new release but instead edits the heading of his thread and adds any changelog in his OP. Maybe he wants to see if we're paying attention. LOL
Mike T
Click to expand...
Click to collapse
Jaloviina said:
I know but wasn't mindful enough...
Click to expand...
Click to collapse
I didn't aware that... May be it's time to change...
daniel_hk said:
I didn't aware that... May be it's time to change...
Click to expand...
Click to collapse
Maybe it is time to change. Making a post for a new release has the added advantage of bumping your thread back toward the top of the list.
Fyi, so far new build running with no issues on my grouper except stock video camera is still FC'ing for me. I have been using Open Camera, which works great for me but wanted to test stock camera to see if video was working. Btw, I did a dirty flash over the previous DU build. Maybe a clean flash would fix the stock video camera but since I'm using Open Camera, I didn't bother.
As always, thanks for your excellent work!
Mike T
Hi Daniel, great ROM all OK. I have used your kernel with pure nexus and it is good. Now i have flashed (dirty, wipe system,cache and dalvik) your rom but i dont find NFC option .... Is this a problem DU?? With pure nexus NFC is OK.
Sorry for bad english.
Inviato dal mio Nexus 7 utilizzando Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction:
CodeX makes your device even snappier than before. Being a battery and performance balanced kernel it never compromises on stability. You know why? Cause your device deserves it! CodeX main priority is battery. More Juice equals More Fun. Introducing the new CodeX Kernel Updater, which downloads the latest builds available from the remote server and flashes it automatically! All you need is network access to download the latest builds from the app. Then just click the Flash Kernel option in the navigation menu to flash the kernel. This app flashes the kernel through TWRP automatically and reboots your device with the latest CodeX Kernel
Rules that CodeX follow:
Be up to date with linux-stable
Stability and Security are at peaks
Features will be added based on Stability (If some feature breaks the stability, then I'll need to break it)
Have fun. And yeah, let me know if you need any feature. I'll always consider user opinions. But as I said, If that feature breaks the stability then I'll consider removing it!
Okay, time for most Interesting part, FEATURES!
Features:
OTA
More Juice
Built with clang-7.0.2
Latest CAF upstream tag merged (LA.UM.6.2.r2-04800-sdm660.0)
Latest linux-stable upstream (4.4.150)
Built on OOS source
DT2W support
Deep sleep fixed
Dirty Ratio tweaks
Better performance than stock
KCAL color control
Boeffla wake lock blocker
CPU wake boost driver
Switch for Fsync
Wireguard VPN support
Audio Control
Disables dm-verity
AnyKernel2 Flashable
CPU Governors:
Alucard
Blu_active
I/O Schedulers:
Maple(default)
TCP:
Westwood(default)
Instructions:
1. Download both the builds (given below).
2. Flash both of them in TWRP/RWRP.
3. Reboot and enjoy
Downloads:
CodeX Updater:
Don't install any of these APKs directly without flashing the Version 1.0 zip! (If you do so, Flashing Kernel option crashes the app!)
Version 1.1 It is a zip to install the app with the right privileges. The app has auto-updater for latest releases
CodeX Kernel:
Version 1.3
Version 1.4
Version 1.5
Version 1.6
Version 1.7
FAQs:
1. Can you add xyz feature?
A. As already said, I'll always consider user opinions. But as I said, If that feature breaks the stability then I'll consider removing it!
2. Why the app needs internet for loading changelog or while flashing kernel?
A. Well, the app tries to load the latest changelog available in the remote server. And regarding flashing kernel, it makes sure that you're flashing latest version of the kernel.
3. Battery drains a lot! Damn CodeX?!
A. I've added most of the battery patches to the kernel. Still if battery drains faster for you, then consider either calibrating your battery or use an app like BetterBatteryStats to know what's causing the drain. Alternatively, I suggest using Greenify.
4. Which ROMs does this kernel support?
A. Have a look at the title. Only AOSP/LOS based ROMs. Though you can try it on MIUI, but you may face bugs
5. Why does the app says CodeX not found?
A. Well, I made this app to work exclusively with CodeX Kernel. I may plan to support other kernels in the future.
6. App Force closes on clicking Flash Kernel?
A. Make sure that you have your Updater in the system.
Thanks to:
@AxelBlaz3 for inviting me to continue his project. He'll work on it when he finds time.
@mihran_thalhath for helping me with some kernel things :good:
@sscsps for his cloud. CodeX shouldn't be existing without him
@Psycho-Mods for helping me in UI designing and fixing weird bugs in the CodeX Updater app.
@Shahan_mik3 for DT2W on custom ROMs.
@shekhawat2 for qcacld driver (Wi-Fi fix).
@nathanchance for the commits I've cherry-picked.
@Sultanxda for several battery and performance commits.
@franciscofranco for battery tweaks.
@osm0sis for AnyKernel2
Sources:
https://github.com/MiguelNdeCarvalho/Codex-Kernel
Telegram group:
Codex Kernel | Whyred: https://t.me/codexkernel
Whyred - OFFICIAL: https://t.me/redminote5proofficial
XDA:DevDB Information
[KERNEL][OTA][AOSP/LOS][CLANG-7.0.2][4.4.150] CodeX Kernel v1.6 [August 18, 2018], Kernel for the Xiaomi Redmi Note 5 Pro
Contributors
MIguelNdeCarvalho, AxelBlaz3
Source Code: https://github.com/MiguelNdeCarvalho/Codex-Kernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v1.7
Stable Release Date: 2018-08-18
Created 2018-07-23
Last Updated 2018-08-18
Changelog:
Version 1.3 (July 23, 2018)
Latest linux-stable upstream (4.4.143),
Latest CAF upstream tag merged (LA.UM.6.2.r1-09500-sdm660.0),
Remove Adreno Boost,
Remove Adreno Idler
Version 1.4 (July 25, 2018)
Latest linux-stable upstream (4.4.144)
Version 1.5 (August 4, 2018)
Latest linux-stable upstream (4.4.145),
Latest CAF upstream tag merged (LA.UM.6.2.r2-04800-sdm660.0),
Add sound control,
Enabled sound control by default,
Added more frequencies and dropped voltage. Thanks to Mihran,
Fully working on Android P
Version 1.6 (August 16, 2018)
Latest linux-stable upstream (4.4.148)
Version 1.7 (August 18, 2018)
Latest linux-stable upstream (4.4.150)
The Codex Updater link is unavailable...
Why another thread?
bayad said:
The Codex Updater link is unavailable...
Click to expand...
Click to collapse
already fixed
alreadyregistered said:
Why another thread?
Click to expand...
Click to collapse
because the project will be mantained by me and Axel will only help me, he has no time
Audio control feature ??
Ara Seferian said:
Audio control feature ??
Click to expand...
Click to collapse
I am not so experienced with kernel, but I will take a look
Uh oh. This happened.
The AndroidGuy said:
Uh oh. This happened.
Click to expand...
Click to collapse
Soon you'll have to ask Google for permission before making a phone call.
peter-k said:
Soon you'll have to ask Google for permission before making a phone call.
Click to expand...
Click to collapse
Haha:silly:
New Build Is Up!
Version 1.5 (August 4, 2018)
Latest linux-stable upstream (4.4.145)
Latest CAF upstream tag merged (LA.UM.6.2.r2-04800-sdm660.0)
Add sound control
Enabled sound control by default
Added more frequencies and dropped voltage. Thanks to Mihran
Fully working on Android P
Have fun!
Great
Thx brthr for this Kernel?? and Thx for Keeping it Updated
Updates Not Showing In The CodeX Updater App...
New Version 1.5, Still Showing 1.2 New Version
great kernel, best performance on AEX. Thanks.
i'm using AEX 5.7 now, how can i flash this kernel?
should i download v1.3 and v1.4? or just v1.5 and then flash it through RWRP?
edomiredo said:
i'm using AEX 5.7 now, how can i flash this kernel?
should i download v1.3 and v1.4? or just v1.5 and then flash it through RWRP?
Click to expand...
Click to collapse
You only need to download 1.5 and flash with twrp. sorry for my bad english.
Ver 1.5 UC/OC CPU
Big: 300 -> 2.2 Ghz
Litle: 300->1.8 Ghz
nghiabh said:
You only need to download 1.5 and flash with twrp. sorry for my bad english.
Ver 1.5 UC/OC CPU
Big: 300 -> 2.2 Ghz
Litle: 300->1.8 Ghz
Click to expand...
Click to collapse
so i can customize kernel configuration with Kernel Adiutor?
edomiredo said:
so i can customize kernel configuration with Kernel Adiutor?
Click to expand...
Click to collapse
Yes
nghiabh said:
Yes
Click to expand...
Click to collapse
it is just me or v1.5 is draining too fast than v1.2?