[ROM] 6.0.1_r46 Android MarshMallow Pure AOSP for Google Nexus 7 2012 WIFI CodeName Grouper
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
INSTRUCTIONS,
1. UPDATE RECOVERY to TWRP 3.0.0-0
2. FACTORY RESET (needed if you have LP or other custom LP or MM Roms)
3. Download ROM Build 06/07
4. Gapps 6.0
5. Root (Optional) Direct Download
6. Optionally,to speed up device,consider to flash ParrotMod
7. Reboot and enjoy...
CREDITS,
AOSP/Google,Dmitry Grinberg for great initial support on build
Bugs
During Google Account registration if you choose Restore device phone return to same screen.After that choose Configure as new device and restore start normally!!!
Stock rom browser generate random soft reboot if you enable Location sharing with device only mode in Location options!!!
Changelog
Beta Release 0.1 Build 10/15
Initial support for N7 2012 WIFI on AOSP MarshMallow
Kernel compiled with Christopher83 4.9 arm toolchain based on google asus 3.1.10 lollipop-mr1 and kernel patch of Dmitry Grinberg
Enable sparsemem option on kernel to optimize memory managemnt and free up memory quickly
Add some options to speed up first boot and dex2oat compilation
Beta Release 0.2 Build 10/19
Possible fix to random sound and autorotate issue
Beta Release 0.3 Build 10/29
Kernel 3.1.x compiled with last 4.9 toolchain
Possible fix to autorotate sound and GPS bug and random sensor problems (test needed!!)
Beta Release 0.4 Build 10/30
Kernel 3.1.x compiled with last 4.9 toolchain reworked to avoid random freezes after deep sleep
Compiled with latest commits of AOSP sources 6.0.0_r1
New BootAnimation based on Nexus factory Images MM
Possible fix to autorotate sound and GPS bug and random sensor problems (test needed!!)
Beta Release 0.5 Build 10/31
Fix NFC lost on Settings--> Other
Beta Release 0.6 Build 01/12
Kernel 3.1.x compiled with last 4.9 toolchain reworked with f2fs support
Compiled with latest commits of AOSP sources 6.0.1_r10)
Beta Release 0.7 Build 02/15
Kernel 3.1.x compiled with last 4.9 toolchain reworked with f2fs support
Compiled with latest commits of AOSP sources 6.0.1_r16)
Beta Release 0.8 Build 03/08
Kernel 3.1.x compiled with last 4.9 toolchain reworked with f2fs support
Compiled with latest commits of AOSP sources 6.0.1_r17
Update to security bulletin 1st march 2016
[/COLOR]
Beta Release 0.9 Build 04/15
Kernel 3.1.x compiled with last 4.9 toolchain reworked with f2fs support
Compiled with latest commits of AOSP sources 6.0.1_r24
Update to security bulletin 1st April 2016
Added reboot shortcut to developer options
[/COLOR]
Beta Release 1.0 Build 05/07
Kernel 3.1.x compiled with last 4.9.2 toolchain reworked with f2fs support
Compiled with latest commits of AOSP sources 6.0.1_r43
Update to security bulletin 1st May 2016
Added patch to prevent Gapps Error on first boot.Thanks to Rock-86
[/COLOR]
Beta Release 1.1 Build 06/07
Kernel 3.1.x compiled with last 4.9.2 toolchain reworked with f2fs support
Compiled with latest commits of AOSP sources 6.0.1_r46
Update to security bulletin 1st Jun 2016
Sources
Google
Kernel tree
I read from the other thread that sound / microphone isn't working. Is sound fixed for this rom?
Root is not working after flashing SuperSU 2.52 zip.
Anyone with a solution?
Error updating binary script on that gapps.
Sent from my Nexus 5 using Tapatalk
tcat007 said:
Error updating binary script on that gapps.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
go to mount and delete flag on system then retry
yogesh1998 said:
Root is not working after flashing SuperSU 2.52 zip.
Anyone with a solution?
Click to expand...
Click to collapse
on my device with my build works fine
dookie23 said:
I read from the other thread that sound / microphone isn't working. Is sound fixed for this rom?
Click to expand...
Click to collapse
seems mic problem only in google app i'm investigating
Thank you a lot !!!
But gapps installation failed.
Bryandu13 said:
Thank you a lot !!!
But gapps installation failed.
Click to expand...
Click to collapse
wipe all
update recovery to twrp 2.8.7.0
in mount if you have a flag on system remove it
then install rom,gapps and supersu
works fine
Thanks for this
Fully working for me. SuperSu. All.
Thank you
i updated gapps links for broken mic auth on gogle now
https://www.androidfilehost.com/?fid=24052804347833783
Thank your for the rom!
vocoderism said:
wipe all
update recovery to twrp 2.8.7.0
in mount if you have a flag on system remove it
then install rom,gapps and supersu
works fine
Click to expand...
Click to collapse
It worked !
Thanks for help and fast reply !!!
How can I change the default launcher? I installed google now launcher but it says "clear defaults of your launcher", but I can't. Settings doesn't have a section for Launcher anymore.
everesee said:
How can I change the default launcher? I installed google now launcher but it says "clear defaults of your launcher", but I can't. Settings doesn't have a section for Launcher anymore.
Click to expand...
Click to collapse
What gapps did you install?
Inviato dal mio Nexus 4 utilizzando Tapatalk
Thank's for this Job !!! this rom and mod sound Dolby Digital Plus Awesome Nexus 7 2012:good:
http://forum.xda-developers.com/note-4/themes-apps/audio-mod-dolby-digital-plus-note-4-t3075871
laugeek57 said:
Thank's for this Job !!! this rom and mod sound Dolby Digital Plus Awesome Nexus 7 2012:good:
Click to expand...
Click to collapse
Mod sound? Link please, I'm getting no sound at all. Otherwise working as good or better than when I bought this thing.
Edit: Looks like dnd was on by default, all sound working well now. Camera doesn't seem to work, but Camera Zoom does (and who uses the n7 camera anyway). Layers work. So far so good!
vocoderism said:
Kernel compiled with Christopher83 4.9 arm toolchain based on google asus 3.1.10 lollipop-mr1 and kernel patch of Dmitry Grinberg
Enable sparsemem option on kernel to optimize memory managemnt and free up memory quickly
Click to expand...
Click to collapse
Just FYI, if you provide a binary of a kernel you must offer sources as per GPL
I do not need it (I am done with N7 work) but you are otherwise on shaky legal ground
dmitrygr said:
Just FYI, if you provide a binary of a kernel you must offer sources as per GPL
I do not need it (I am done with N7 work) but you are otherwise on shaky legal ground
Click to expand...
Click to collapse
Sure i upload tomorrow on github
Inviato dal mio Nexus 4 utilizzando Tapatalk
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SlimRoms is a custom android operating system. The main goal is to offer users a slimmed down but still feature rich alternative to other android operating systems.
The entire SlimTeam work together to bring you this tailor-made beauty straight from Android Open Source Project (AOSP) source code.
All of the sources can be publicly viewed through Github and you can stop by the public Gerrit to submit patches of any type.
SlimLP is the project name for SlimRoms based on Android 5.0 and offers the following original features:
Custom Shortcuts. Everywhere.
Hardware keys, Navigation Ring, Navigation Bar, Lockscreen, Tiles, Notifications etc. - We've got you covered.
System-Wide Keyboard Controls
Rotation, cursor control, optional emoticions, etc. - You'll be tapping away to your heart's content.
SlimCenter (Coming Soon)
Downloads, contact information, system app removal. - More fun than you can shake a stick at.
Camera Features
Trueview, Smart Capture. - Capture life moments with ease.
Important links:
SlimRoms.net - The official webpage where you find everything you need to know about SlimRoms.
Downloads - Download the rom, gapps and other addons. Temporarily:
ROM:
Old builds (until 08/22)
New builds (after 08/22)
GAPPS:
Official Slim GApps
Installation instructions
maultasche said:
Sure =)
1. make sure you are on a recovery which can flash .img files. I recommend TWRP 2.8.5.0
2. While in recovery go to install, change .zip to img on the bottom right, choose the image and flash the needed recovery which you can find here
3. reboot your phone into recovery
4. F2FS is not mandatory - the install.zip formats /system automatically into F2FS. But as aaz03 recommended to get full feature of F2FS and the ROM format /cache and /data to F2FS as well. You can do that in recovery with wipe - advanced wipe - select cache - click on repair or change file system - click on change file system - choose F2FS and confirm with a swipe. Do that as well for data. But as mentioned you can run /cache, /data in ext4 as well.
5. Flash gapps and you're done.
If you decide to format /data into F2FS make sure you backup everything in internal storage as you'll lose those files etc. in there
Click to expand...
Click to collapse
But what if i don't want to use F2FS? Can you please make a ext4 rom?
FOR GOD'S SAKE F2FS IS NOT MANDATORY, THE ROM JUST SUPPORTS IT YOU DON'T HAVE TO FORMAT EVERYTHING TO F2FS TO USE THIS ROM. YOU CAN PERFECTLY USE IT WITHOUT DOING ANY CHANGE TO PARTITIONS! EXT4 IS PERFECTLY WORKING
Click to expand...
Click to collapse
Latest Changelog - For now check Gerrit for changelog.
FAQ - The most frequent asked questions with answers.
Get in touch! - Contact SlimRoms at these places if you have questions, requests or feedback.
Google+
Twitter
Facebook
Kernel source
Disclaimer: SlimRoms or the builder of the rom are not responsible for any damages to your device.
Thanks to
SlimRoms for their awesome rom
Archidroid for his optimizations and his kernel
CyanogenMod for various sources
Derteufel for his lollipop sources
BitSyko and LayersTeam for RRO/Layers theming
SdtBarbarossa for his fully F2FS compatible recovery
NamelessRoms for various sources
HboHD for his awesome work on porting ArchiKernel to our device
And all those who helped me to learn to build in any way
XDA:DevDB Information
SlimLP, ROM for the Samsung Galaxy S III I9305
Contributors
aaz03
ROM OS Version: 5.1.x Lollipop
Based On: Slim
Version Information
Status: Beta
Created 2015-03-07
Last Updated 2015-06-15
Reserved
Changelog:
Alpha builds
-09 June 2015 : SlimLP 5.1.1 Alpha released
-14 June 2015 : SlimLP 5.1.1 Alpha Build 2 released: All previous bugs fixed
-15 June 2015 : SlimLP 5.1.1 Alpha Build 3 released: Using UBER Toolchains and Archi's optis V4
-17 June 2015 : SlimLP 5.1.1 Alpha Build 4 released: Added Boeffla , ZZmoove Governors to stock kernel, build from clean .ccache
-22 June 2015 : SlimLP 5.1.1 Alpha Build 5 released: BFQ v7r8 fully working
-02 July 2015 : SlimLP 5.1.1 Alpha Build 6 released: ArchiKernel Opti
Beta Builds
-09 July 2015 : SlimLP 5.1.1 Beta Build 1 released: mdnie tweaks (not sure if working) + all the updates from official slim
-12 July 2015 : EXPERIMENTAL F2FSlimLP 5.1.1 Beta released : Full F2FS-only rom !
-14 July 2015 : SlimLP 5.1.1 Beta Build 2 released: Stable release with F2FS or ext4 , UBER 5.1 for kernel
-19 July 2015 : SlimLP 5.1.1 Beta Build 3 released: Full RRO/Layers theme support , SIO Scheduler as default, intake amperage changed to [email protected] & [email protected] for faster charging
-21 July 2015 : SlimLP 5.1.1 Beta Build 4 released: Layers theming patched for Settings, SystemUI, Contacts, Dialer and Settings
-26 July 2015 : SlimLP 5.1.1 Beta Build 5 released: Google Play Services FC fixed, PIPE & Graphite Rom optimizations
-13 August 2015 : SlimLP 5.1.1 Beta Build 6 released :Stock kernel perfectly working, ART & Bionic Optimizations
-15 August 2015 : SlimLP 5.1.1 Beta Build 7 released :Settings FC fixed, RRO/layers fixed, Zzmoove v1.0 beta 8
-22 August 2015 : SlimLP 5.1.1 Beta Build 8 released : Replaced Liquify Optimizations by Archidroid v4.1, build from clean ccache (will take more time), build with user instead of userdebug (better for battery)
-31 August 2015 : SlimLP 5.1.1 Beta Build 9 released : Use dlmalloc for bionic, art Optimizations, L1/L2 cache optimizations
- 01 September 2015 : SlimLP 5.1.1 Beta Build 10 released : Art dex-preoptimization, optimized sqlite, rro fix for frameworks/base, added gpu control to kernel
- 06 September 2015 : SlimLP 5.1.1 Beta Build 11 released : slim updates
- 13 September 2015 : SlimLP 5.1.1 Beta Build 12 released : skia optimized, vendor optimized for art, ndk optimized, libcore optimized
- 25 September 2015 : SlimLP 5.1.1 Beta Build 13 released : updated to slimLP beta0.8 + updated kernel toolchain to UberTC 5.2
- 11 October 2015 : SlimLP 5.1.1 Beta Build 14 released: updated to android 5.1.1 R24, updated Kernel Source and SMDK common source
- 24 October 2015 : SlimLP 5.1.1 Beta Build 15 released: updated kernel source, cleaned kernel, all the changes from SlimRoms
- ?? November 2015 : SlimLP 5.1.1 Beta Build 16 incomng: wm8994 sound upgrades from latest samsung kernel + Layers 3.0 support + Slim 0.12
Caution : To read before flashing
Important: Wtf is wrong with this rom?
No error that i know about
My recovery isn't working with F2FS HELP
Install any TWRP recovery with .img support and then flash the AAAWESOME recovery of SdtBarbarossa here
What do we already have in addition to a simple rom?
In rom:
- SlimLP
- Uber Toolchains 4.9
- Archi's optimizations V4.1
- Liquify, PIPE , Graphite build optimizations
- Art Optimizations
- Sqlite Optimized
- 3g/lte data is working
- Xposed compatibility
- RRO/Layers/Overlay themes compatibility
- F2FS for /system
- Bionic Optimizations for Cortex A9
In stock kernel:
- ArchiKernel 's optimizations
- Uber Toolchains 5.1
- Full F2FS support (/system , /data and /cache)
- Cpu UV
- ZZmoove governors (v1.0b8) + BFQ (v7r8) & SIO schedulers
- Boeffla Sound Engine 1.6.7
What will come soon?
- MOAR BUILDS
Awesome mate. I'm a big fan of slimroms!! I'll keep a look out for when the rom is ready. Let me know if you want anything tested. :good:
Can't wait!!!! Great and thanks, if not for the job yet, for the intention!
Sent from my GT-I9305 using XDA Free mobile app
Fingers crossed this one will actually work! Any idea of an ETA?
slimrom is the best, cant wait
Could you say what is the base for this rom? Why exactly you chosen to compile SlimLP, not some other more feature-packed rom? [emoji14]
Just wondering and looking forward to testing a cm based slim lp?!? Sounds interesting and new for me ...can you share your local manifest? Are your sources on github?
can´t wait to test but will the cm12 musicplayer and musicfx be in this rom?
My sources aren't on github.com for the simple reason that I can't upload it, my upload rate is 100kb/s so imagine the time it'd get for 20gb... But I'll upload my local manifest. It'll be based on cm12 as atm we don't have an aosp base so I'll do with what I got.
Why slim ? Because we don't have slim on our device and it's known to work well with optimizations
EDIT: -08 March 2015 : Build started, pray for it
aaz03 said:
My sources aren't on github.com for the simple reason that I can't upload it, my upload rate is 100kb/s so imagine the time it'd get for 20gb... But I'll upload my local manifest. It'll be based on cm12 as atm we don't have an aosp base so I'll do with what I got.
Why slim ? Because we don't have slim on our device and it's known to work well with optimizations
EDIT: -08 March 2015 : Build started, pray for it
Click to expand...
Click to collapse
nice. hope its as stable as on my galaxy tab 2. looking forward to test soon :fingers-crossed:
aaz03 said:
My sources aren't on github.com for the simple reason that I can't upload it, my upload rate is 100kb/s so imagine the time it'd get for 20gb... But I'll upload my local manifest. It'll be based on cm12 as atm we don't have an aosp base so I'll do with what I got.
Why slim ? Because we don't have slim on our device and it's known to work well with optimizations
EDIT: -08 March 2015 : Build started, pray for it
Click to expand...
Click to collapse
it is uploading or you are building this?
However, SlimLP is less feature-packed than any other ROMs. And I somehow prefer to have aaaaall possible options to configure my phone
I got a Optipop build finished from sources but it doesn't boot...does not even pass the samsung boot logo. I think its because of the kernel, which is DerTeufels CM kernel without changes. Any idea what I have to change and/or which kernel I could/should try? Cm-12-Boeffla 3.0 alpha 9 I have already tried, but with same result ....
One option is Boeffla 3.0 and the other is latest PSN kernel. These two are working for different roms
Well f*ck ,seems like it doesn't found the linux/videodev.h while compiling hwcomposer, i installed libv4l-dev and done the trick to use the new replacement videodev version but still not
when you gonna upload the rom I'm waiting anxiously. @aaz03
When I will find Wtf is going wrong with videodev.h
EDIT: Changelog updated , keep an eye on it i'll update as soon I have news.
SOON...
[ROM] 6.0.1_r46 Android MarshMallow Pure AOSP for Google Nexus 7 2012 WIFI+3G CodeName Tilapia
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
INSTRUCTIONS,
1. UPDATE RECOVERY to TWRP 2.8.7.0
2. FACTORY RESET (needed if you have LP or other custom LPor MM Roms)
3. Download ROM Build 06/07
4. Gapps 6.0
5. Root (Optional) Direct Download
6. Optionally,to speed up device,consider to flash ParrotMod
7. Reboot and enjoy...
CREDITS,
AOSP/Google,Dmitry Grinberg for great initial support on build
Known Bugs
During Google Account registration if you choose Restore device phone return to same screen.After that choose Configure as new device and restore start normally!!!
Stock rom browser generate random soft reboot if you enable Location sharing with device only mode in Location options!!!
Changelog
Beta Release 0.1 Build 10/15
Initial support for N7 2012 WIFI on AOSP MarshMallow
Kernel compiled with Christopher83 4.9 arm toolchain based on google asus 3.1.10 lollipop-mr1 and kernel patch of Dmitry Grinberg
Enable sparsemem option on kernel to optimize memory managemnt and free up memory quickly
Add some options to speed up first boot and dex2oat compilation
Hack ril vendor files to try to activate 3g on MM code
Beta Release 0.2 Build 10/16
Possible fix to rild daemon permission to try to acticate SIM (test needed!!)
Beta Release 0.3 Build 10/19
fix 3g Data Connection broken
fix to libstlport bootloop stuck
Beta Release 0.4 Build 10/30
Kernel 3.1.x compiled with last 4.9 toolchain reworked to avoid random freezes after deep sleep
Compiled with latest commits of AOSP sources 6.0.0_r1
New BootAnimation based on Nexus factory Images MM
Possible fix to autorotate sound and GPS bug and random sensor problems (test needed!!)
Beta Release 0.5 Build 10/31
fix NFClost on Settings-->Other
fix bootloop
Beta Release 0.6 Build 01/12
Kernel 3.1.x compiled with last 4.9 toolchain now support f2fs
Compiled with latest commits of AOSP sources 6.0.1_r10
Beta Release 0.7 Build 02/15
Kernel 3.1.x compiled with last 4.9 toolchain now support f2fs
Compiled with latest commits of AOSP sources 6.0.1_r16
Beta Release 0.7 Build 03/08
Kernel 3.1.x compiled with last 4.9 toolchain now support f2fs
Compiled with latest commits of AOSP sources 6.0.1_r17
Update to security bulletin 1st March 2016
[/I][/B]Beta Release 0.8 Build 04/15
Kernel 3.1.x compiled with last 4.9 toolchain now support f2fs
Compiled with latest commits of AOSP sources 6.0.1_r24
Update to security bulletin 1st April 2016
Added reboot shortcut to developer options
/I][/B]Beta Release 0.9 Build 05/07
Kernel 3.1.x compiled with last 4.9.2 toolchain now support f2fs
Compiled with latest commits of AOSP sources 6.0.1_r43
Update to security bulletin 1st May 2016
Added patch to prevent Gapps Error on first boot.Thanks to Rock-86
/I][/B]Beta Release 1.0 Build 06/07
Kernel 3.1.x compiled with last 4.9.2 toolchain now support f2fs
Compiled with latest commits of AOSP sources 6.0.1_r46
Update to security bulletin 1st Jun 2016
Sources
Google
Kernel tree
Thanks for the great working. It seems working and I also attached the logcat output.
cas_xp said:
Thanks for the great working. It seems working and I also attached the logcat output.
Click to expand...
Click to collapse
3g works?
Inviato dal mio Nexus 4 utilizzando Tapatalk
vocoderism said:
3g works?
Inviato dal mio Nexus 4 utilizzando Tapatalk
Click to expand...
Click to collapse
Says no SIM
pavik62 said:
Says no SIM
Click to expand...
Click to collapse
You have noto signal in status bar!?
Inviato dal mio Nexus 4 utilizzando Tapatalk
Doesn't see SIM card.
pavik62 said:
Doesn't see SIM card.
Click to expand...
Click to collapse
Screenshot please
Inviato dal mio Nexus 4 utilizzando Tapatalk
No SIM
Logcat please when you try to activate sim
Inviato dal mio Nexus7 2012 WIFI utilizzando Tapatalk
Logcat
pavik62 said:
Logcat
Click to expand...
Click to collapse
Seems rild permission but tomorrow i will investigate better.i have only grouper so IT is too hard to reproduce issue.for the rest ROM seems work fine
Inviato dal mio Nexus7 2012 WIFI utilizzando Tapatalk
Going to try in Next few days. Thanks for sharing.
Sent from my ONE A2003 using Tapatalk
vocoderism said:
Seems rild permission but tomorrow i will investigate better.i have only grouper so IT is too hard to reproduce issue.for the rest ROM seems work fine
Inviato dal mio Nexus7 2012 WIFI utilizzando Tapatalk
Click to expand...
Click to collapse
please try new build to verify ril 3g data connection
[ROM] 6.0 Android MarshMallow Pure AOSP for Google Nexus 7 2012 WIFI+3G CodeName Tilapia Build 10/16
link in first OP and then please report :good:
someone can try last build please?
thaks a lot
vocoderism said:
someone can try last build please?
thaks a lot
Click to expand...
Click to collapse
Unfortunately as there is no SIM
pavik62 said:
Unfortunately as there is no SIM
Click to expand...
Click to collapse
thx a lot i prepare new build and share with you
pavik62 said:
Unfortunately as there is no SIM
Click to expand...
Click to collapse
wait build with possible 3g fix in 20 minutes
pavik62 said:
Unfortunately as there is no SIM
Click to expand...
Click to collapse
build ready download flasg test all including 3g and report back
link updated in thread
https://www.androidfilehost.com/?fid=24052804347839008
vocoderism said:
build ready download flasg test all including 3g and report back
link updated in thread
https://www.androidfilehost.com/?fid=24052804347839008
Click to expand...
Click to collapse
Boots up to bootanimation and restarts. Sometimes it starts optimizing apps, but again restarts.
pavik62 said:
Boots up to bootanimation and restarts. Sometimes it starts optimizing apps, but again restarts.
Click to expand...
Click to collapse
Format data including data media and System then reboot recovery again copy rom gapps and supersu and flash please
ElementalX Kernel - UNOFFICIAL
ASUS MeMOPAD 10 FHD LTE - ME302KL
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THIS IS A PORTING FOR THE MEMOPAD 10 FHD - ME302KL Many thanks to @flar2 for his work !
Features
Easy installation and setup with AROMA installer
Stock/AOSP versions
Best balance of performance and battery life
Color control
USB fastcharge (optional)
Sweep2sleep (optional)
Sweep2wake and doubletap2wake (optional)
Wake Gestures app support
MultiROM support
disable fsync (optional)
sound control
Underclock or overclock CPU
L2 and bus overclocking options
choose automatic minimum voltage (725mV to 850mV)
kernel-based thermal control
GPU overclocking options
voltage control
NTFS read/write and exFAT support
init.d support
optional USB OTG + charge mode
No forceencrypt
UNOFFICIAL ElementalX 6.15 for DUMA Use this Only for LineageOS 14.1, AOSP 7.1.2 r12 or newer, Resurrection Remix and AOSP Extended from @Den147
https://www.androidfilehost.com/?fid=673791459329055112
UNOFFICIAL ElementalX 6.13 for DUMA Use this Only for LineageOS 14.1, AOSP 7.1.2 r12 or newer, Resurrection Remix and AOSP Extended from @Den147
https://www.androidfilehost.com/?fid=673368273298987229
UNOFFICIAL ElementalX 6.12 for DUMA Use this Only for LineageOS 14.1, AOSP 7.1.2 r12 or newer, Resurrection Remix and AOSP Extended from @Den147
https://www.androidfilehost.com/?fid=889764386195924832
UNOFFICIAL ElementalX 6.10 for DUMA Use this Only for LineageOS 14.1, AOSP 7.1.2 r12 or newer, Resurrection Remix and AOSP Extended from @Den147
https://www.androidfilehost.com/?fid=817550096634783603
UNOFFICIAL ElementalX 6.09 for DUMA Use this Only for LineageOS 14.1, AOSP 7.1.2 r12 or newer, Resurrection Remix and AOSP Extended from @Den147
https://www.androidfilehost.com/?fid=889764386195908699
UNOFFICIAL ElementalX 6.07 for DUMA Use this Only for AOSP 7.1.2 r8 (and Nitrogen OS 7.1.2) or older
https://www.androidfilehost.com/?fid=673368273298953844
APP TO CUSTOMIZE WAKE GESTURES
https://elementalx.org/wake-gestures/
REMEMBER: DO NOT USE ELEMENTAL X FILES FOR NEXUS 7 (2013) (FLO/DEB) ON MEMOPAD ME302KL
Source
https://github.com/yatto/ElementalX
XDAevDB Information
[DUMA][Unofficial]ElementalX, Kernel for the MeMOPAD 10FHD 4G
Contributors
All credits to @flar2 - Many thanks to you !
Flar2 Source Code: https://github.com/flar2/flo
Version Information
Status: Stable
Current Stable Version: 6.5
Hi @yattodettaman thanks a lot for your hard work!
Just only a question, i've installed the new kernel and follow the aroma wizard for customizing kernel parameter.
EX kernel manager 2.101 does not allow to tweak any settings, is it normal? With the previous version it worked letting me to choice all parameters.
Have a nice day.
GiGiSSiMo said:
Hi @yattodettaman thanks a lot for your hard work!
Just only a question, i've installed the new kernel and follow the aroma wizard for customizing kernel parameter.
EX kernel manager 2.101 does not allow to tweak any settings, is it normal? With the previous version it worked letting me to choice all parameters.
Have a nice day.
Click to expand...
Click to collapse
I use ExManager ver 2.90 and It works very well
yattodettaman said:
I use ExManager ver 2.90 and It works very well
Click to expand...
Click to collapse
Stupid me... I forgot to root again after flashing new kernel...
Sorry for wasting your time
Inviato dal mio Nexus 5 utilizzando Tapatalk
GiGiSSiMo said:
Stupid me... I forgot to root again after flashing new kernel...
Sorry for wasting your time
Inviato dal mio Nexus 5 utilizzando Tapatalk
Click to expand...
Click to collapse
Do you like the new kernel ??!?!?!
yattodettaman said:
Do you like the new kernel ??!?!?!
Click to expand...
Click to collapse
I love it! It's wonderful and first impression is that is more stable!!!!
Cpu 1998
Gpu 490
Love!!!
Inviato dal mio Nexus 5 utilizzando Tapatalk
UPDATE: 7.1.2 boot.img
https://www.androidfilehost.com/?fid=457095661767153687
UPDATED to 6.07 release.
Download in 1st post
init.d support
Hi.
For starters I would like to commend for the roms of the 7.1.1-7.1.2 series and for the experimental kernel. It's a great job.
I have one problem with init.d. I put script in /system/etc/init.d and gave it the executable permission.
The script has a call to the command: 'service call SurfaceFlinger 1008 i32 1'
This command turns on the option "Disable HW Overlay".
However, at startup the script is not executed. In the script I also posted a command that writes the restart date: 'date >> /storage/2CA6-1DE2/log.txt'
And this is also not done.
Script file - /system/etc/init.d/11FixOverlays:
Code:
#!/system/bin/sh
service call SurfaceFlinger 1008 i32 1
date >> /storage/2CA6-1DE2/log.txt
Script running manually works: it turn on the "Disable HW Overlay" option and writes the date of the file.
How to force the system to run script in init.d when system starting???
I have installed ROM AOSP 7.1.2 Release R2, Elemental X 6.07 Kernel, and SuperSU-v2.79.
tik2009 said:
Hi.
For starters I would like to commend for the roms of the 7.1.1-7.1.2 series and for the experimental kernel. It's a great job.
I have one problem with init.d. I put script in /system/etc/init.d and gave it the executable permission.
The script has a call to the command: 'service call SurfaceFlinger 1008 i32 1'
This command turns on the option "Disable HW Overlay".
However, at startup the script is not executed. In the script I also posted a command that writes the restart date: 'date >> /storage/2CA6-1DE2/log.txt'
And this is also not done.
Script file - /system/etc/init.d/11FixOverlays:
Code:
#!/system/bin/sh
service call SurfaceFlinger 1008 i32 1
date >> /storage/2CA6-1DE2/log.txt
Script running manually works: it turn on the "Disable HW Overlay" option and writes the date of the file.
How to force the system to run script in init.d when system starting???
I have installed ROM AOSP 7.1.2 Release R2, Elemental X 6.07 Kernel, and SuperSU-v2.79.
Click to expand...
Click to collapse
The kernel has init.d support.
The rom is AOSP. So if you want to enable init.d script flash this with Twrp https://forum.xda-developers.com/android/software/mod-universal-init-d-enabler-android-t3396695
Hi @yattodettaman can i flash new 6.07 on crDroid?
GiGiSSiMo said:
Hi @yattodettaman can i flash new 6.07 on crDroid?
Click to expand...
Click to collapse
I don't know. Make a backup and try... i have no time to try everything. Sorry. I'm on aosp with last glitch now and works very well
yattodettaman said:
I don't know. Make a backup and try... i have no time to try everything. Sorry. I'm on aosp with last glitch now and works very well
Click to expand...
Click to collapse
I was on the same as you, but i want to try all your ROMs!
Just another question... Does Ex Kernel or crDroid supports F2FS?
New Release is UP !
Download in 1st post
It's only for new kind of DUMA boot.img shipped with AOSP 7.1.2 r12, so don't use with older release !
New Release is UP - 6.09 !
Download in 1st post
It's only for new kind of DUMA boot.img shipped with AOSP 7.1.2 r12, so don't use with older release !
New Release is UP - 6.10 !
Download in 1st post
It's only for new kind of DUMA boot.img shipped with AOSP 7.1.2 r12, so don't use with older release !
Changelog?
What's new in 6.10?
moldowan said:
What's new in 6.10?
Click to expand...
Click to collapse
,
The same as ExKernel for Nexus7 2013, sync with last lineageos updates and security updates.
New Release is UP - 6.12 !
Download in 1st post
It's only for new kind of DUMA boot.img shipped with LineageOS 14.1 and from AOSP 7.1.2 r12 and newer , so don't use with older release !
New Release is UP - 6.13 !
Download in 1st post
It's only for new kind of DUMA boot.img shipped with LineageOS 14.1 and from AOSP 7.1.2 r12 and newer , so don't use with older release !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Instructions:-
- Download ROM and Gapps
- Flash ROM then Gapps
Downloads:-
- ROM: https://drive.google.com/open?id=1HUGMWtMOFqJfZYrfrdHnEDh0hvNQ9i9X (2018-07-25)
ARM version: https://drive.google.com/open?id=13k-mtoxvl1ZscGSStATRp9zDO0tzLzTp (2018-08-19)
- Gapps: https://cdn.dirtyunicorns.com/api/d...ioGappsMini-arm64-8.x.x-official-June2018.zip
For ARM: https://opengapps.org/
- Previous RR custom bootanimation (In 6.1.0 update, RR uses generic android bootanimation which is boring, if you want to show off then flash this one): https://drive.google.com/open?id=1hNni3y9nEpeqS8alDSzEWPfl2XXKfTot
- No need bootanimation.zip for ARM build
Thanks to:-
@Alberto97 for device, vendor and kernel tree
@DeHuMaNiZeD for letting me build the updated ROM he already built
RR team for this cool ROM: https://github.com/ResurrectionRemix
@BtbN For ARM commits
Join the telegram group
https://t.me/resurrectionremixchat
Bugs:-
- Every bug from my first build has been fixed in recent builds.
- For any other bugs, post in this forum
Created: 2018-06-17
Last Updated: 2018-08-19
GoT ReSuRrEcTeD !!
2018-07-06
Added sdfat support for exfat cards.
Fixed vendor mismatch bug.
2018-07-10
AudioFX works on some apps
July security patch
Overclocked CPU to 2.2GHz
Overclocked GPU to 800MHz
Battery Idle drain fixed
2018-07-22
Nothing new just changed kernel from Permissive to Enforcing for security.
2018-07-23
Gesture menu is back which I happened to remove accidentally in 0722 build
2018-07-25
Added Kcal support
Added Boeffla Wakelock Blocker
Added blu_active CPU governor
Added Adreno Idler
Some Build.prop tweaks for battery
Removed overclocking
Back to Permissive because of Gcam
2018-08-02
SafetyNet Fixed
ARM build
Overclocked CPU 2.2Ghz, GPU 750Mhz
All kernel features from previous build is removed except sdfat
No need for external bootanimation.zip
Cleaner build
Permissive
2018-08-04
Overclocking removed
Added elementalx, alucard and smartmax governors
Added Kcal
Selinux Enforcing
Set initial GPU Freq to 133mhz for better battery (set it back to 320mhz if you feel UI is stuttering)
2018-08-19
Removed elementalx and smartmax
Added zzmoove governor
Some optimisations
Lift to check phone works now
Added Boeffla Wakelock Blocker
*Restart device after turning on fingerprint sleep
Greate news - will try it tommorow .
Downloading... Thanks a lot!
Is this rom 64bit?
I like mu ROM The trouble is that they do not want to be an official
Great, thanks for this!
Do you plan to add MOD support ?
Ax1qwer said:
Great, thanks for this!
Do you plan to add MOD support ?
Click to expand...
Click to collapse
Thanks but no, I don't have that much time.
joaonv00 said:
Is this rom 64bit?
Click to expand...
Click to collapse
Yes OP says that..
Nice powerfull rom , many settings - but elegant simply interface . A lot to check ... if Bluetooth communication work for calls I stay on it .
Thanks for build RR!
hello, I find this rom very stable.
it has a lot of options we can almost set everything. I prefer it largely to candyos.
I will surely keep this rom for every day.
Harlemito said:
hello, I find this rom very stable.
it has a lot of options we can almost set everything. I prefer it largely to candyos.
I will surely keep this rom for every day.
Click to expand...
Click to collapse
I'm using it as my daily driver for 3 days now and it's quite stable. No FCs or anything till now.
Manish355 said:
I'm using it as my daily driver for 3 days now and it's quite stable. No FCs or anything till now.
Click to expand...
Click to collapse
Is this build on-pair with dotOS with moto sources and android - it is OPM2 other builds are OPM6 does it change anything ? On Magisk 16.4 rom is slower than with Magisk 16.0 and cameras lags on Magisk 16.4
Overall rom is a bit slower than eg. dotOS -- especially , Google Playstore .
I installed magisk 16.0, i have no slowdown and no compatibility issue.
I only installed the f2fs patch.
Harlemito said:
I installed magisk 16.0, i have no slowdown and no compatibility issue.
I only installed the f2fs patch.
Click to expand...
Click to collapse
Why f2fs patch on Oreo ROM...?
jatinkhatri said:
Why f2fs patch on Oreo ROM...?
Click to expand...
Click to collapse
F2FS loopback bug workaround for full magisk functionality
sebx_g1 said:
Is this build on-pair with dotOS with moto sources and android - it is OPM2 other builds are OPM6 does it change anything ? On Magisk 16.4 rom is slower than with Magisk 16.0 and cameras lags on Magisk 16.4
Overall rom is a bit slower than eg. dotOS -- especially , Google Playstore .
Click to expand...
Click to collapse
Build number varies with rom, it is built using the same sources I used for dotOS because those are most stable and recent sources by Alberto. It doesn't change anything other than just the build number itself.
Harlemito said:
F2FS loopback bug workaround for full magisk functionality
Click to expand...
Click to collapse
On Oreo 8.1 ROM , you don't need f2fs patch .... I'm on Oreo 8.1 without it ..all works fine ..... If you need magisk on naught ROM , you must have f2fs patch to be able to.install magisk modules
Manish355 said:
Instructions:-
- First flash this recovery https://sourceforge.net/projects/xp.../Addison-Treble-recovery-3.2.1-0.img/download
Rom is not Treble supported but somehow requires treble based recovery, so flash it first
- Download ROM and Gapps
- Flash ROM then Gapps
Downloads:-
- ROM:https://drive.google.com/open?id=1iYSCawrzNP-cK2crQTi9DN3ikzRPi139
- Gapps:https://cdn.dirtyunicorns.com/api/d...ioGappsMini-arm64-8.x.x-official-June2018.zip
- Previous RR custom bootanimation (In 6.1.0 update, RR uses generic android bootanimation which is boring, if you want to show off then flash this one): https://drive.google.com/open?id=1hNni3y9nEpeqS8alDSzEWPfl2XXKfTot
Thanks to:-
Alberto97 for device, vendor and kernel tree: https://github.com/Alberto97
DeHuMaNiZeD for letting me build the updated ROM he already built: https://forum.xda-developers.com/member.php?u=3693461
RR team for this cool ROM: https://github.com/ResurrectionRemix
Bugs:-
- AudioFX app is not working, use ViperFX as alternative
- You'll get the same "Your vendor does not match with the system" message, just ignore it
- Bugs related to Gapps are more or less Gapps error itself. It maybe due to magisk too, so try magisk 16.0
- For any other bugs, post in this forum
Created: 2018-06-17
Last Updated: 2018-06-17
Click to expand...
Click to collapse
Can this Recovery be installed by the existing TWRP itself? Thank you!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction:
CodeX makes your device even snappier than before. Being a battery and performance balanced kernel it never compromises on stability. You know why? Cause your device deserves it! CodeX main priority is battery. More Juice equals More Fun. Introducing the new CodeX Kernel Updater, which downloads the latest builds available from the remote server and flashes it automatically! All you need is network access to download the latest builds from the app. Then just click the Flash Kernel option in the navigation menu to flash the kernel. This app flashes the kernel through TWRP automatically and reboots your device with the latest CodeX Kernel
Rules that CodeX follow:
Be up to date with linux-stable
Stability and Security are at peaks
Features will be added based on Stability (If some feature breaks the stability, then I'll need to break it)
Have fun. And yeah, let me know if you need any feature. I'll always consider user opinions. But as I said, If that feature breaks the stability then I'll consider removing it!
Okay, time for most Interesting part, FEATURES!
Features:
OTA
More Juice
Built with clang-7.0.2
Latest CAF upstream tag merged (LA.UM.6.2.r2-04800-sdm660.0)
Latest linux-stable upstream (4.4.150)
Built on OOS source
DT2W support
Deep sleep fixed
Dirty Ratio tweaks
Better performance than stock
KCAL color control
Boeffla wake lock blocker
CPU wake boost driver
Switch for Fsync
Wireguard VPN support
Audio Control
Disables dm-verity
AnyKernel2 Flashable
CPU Governors:
Alucard
Blu_active
I/O Schedulers:
Maple(default)
TCP:
Westwood(default)
Instructions:
1. Download both the builds (given below).
2. Flash both of them in TWRP/RWRP.
3. Reboot and enjoy
Downloads:
CodeX Updater:
Don't install any of these APKs directly without flashing the Version 1.0 zip! (If you do so, Flashing Kernel option crashes the app!)
Version 1.1 It is a zip to install the app with the right privileges. The app has auto-updater for latest releases
CodeX Kernel:
Version 1.3
Version 1.4
Version 1.5
Version 1.6
Version 1.7
FAQs:
1. Can you add xyz feature?
A. As already said, I'll always consider user opinions. But as I said, If that feature breaks the stability then I'll consider removing it!
2. Why the app needs internet for loading changelog or while flashing kernel?
A. Well, the app tries to load the latest changelog available in the remote server. And regarding flashing kernel, it makes sure that you're flashing latest version of the kernel.
3. Battery drains a lot! Damn CodeX?!
A. I've added most of the battery patches to the kernel. Still if battery drains faster for you, then consider either calibrating your battery or use an app like BetterBatteryStats to know what's causing the drain. Alternatively, I suggest using Greenify.
4. Which ROMs does this kernel support?
A. Have a look at the title. Only AOSP/LOS based ROMs. Though you can try it on MIUI, but you may face bugs
5. Why does the app says CodeX not found?
A. Well, I made this app to work exclusively with CodeX Kernel. I may plan to support other kernels in the future.
6. App Force closes on clicking Flash Kernel?
A. Make sure that you have your Updater in the system.
Thanks to:
@AxelBlaz3 for inviting me to continue his project. He'll work on it when he finds time.
@mihran_thalhath for helping me with some kernel things :good:
@sscsps for his cloud. CodeX shouldn't be existing without him
@Psycho-Mods for helping me in UI designing and fixing weird bugs in the CodeX Updater app.
@Shahan_mik3 for DT2W on custom ROMs.
@shekhawat2 for qcacld driver (Wi-Fi fix).
@nathanchance for the commits I've cherry-picked.
@Sultanxda for several battery and performance commits.
@franciscofranco for battery tweaks.
@osm0sis for AnyKernel2
Sources:
https://github.com/MiguelNdeCarvalho/Codex-Kernel
Telegram group:
Codex Kernel | Whyred: https://t.me/codexkernel
Whyred - OFFICIAL: https://t.me/redminote5proofficial
XDA:DevDB Information
[KERNEL][OTA][AOSP/LOS][CLANG-7.0.2][4.4.150] CodeX Kernel v1.6 [August 18, 2018], Kernel for the Xiaomi Redmi Note 5 Pro
Contributors
MIguelNdeCarvalho, AxelBlaz3
Source Code: https://github.com/MiguelNdeCarvalho/Codex-Kernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v1.7
Stable Release Date: 2018-08-18
Created 2018-07-23
Last Updated 2018-08-18
Changelog:
Version 1.3 (July 23, 2018)
Latest linux-stable upstream (4.4.143),
Latest CAF upstream tag merged (LA.UM.6.2.r1-09500-sdm660.0),
Remove Adreno Boost,
Remove Adreno Idler
Version 1.4 (July 25, 2018)
Latest linux-stable upstream (4.4.144)
Version 1.5 (August 4, 2018)
Latest linux-stable upstream (4.4.145),
Latest CAF upstream tag merged (LA.UM.6.2.r2-04800-sdm660.0),
Add sound control,
Enabled sound control by default,
Added more frequencies and dropped voltage. Thanks to Mihran,
Fully working on Android P
Version 1.6 (August 16, 2018)
Latest linux-stable upstream (4.4.148)
Version 1.7 (August 18, 2018)
Latest linux-stable upstream (4.4.150)
The Codex Updater link is unavailable...
Why another thread?
bayad said:
The Codex Updater link is unavailable...
Click to expand...
Click to collapse
already fixed
alreadyregistered said:
Why another thread?
Click to expand...
Click to collapse
because the project will be mantained by me and Axel will only help me, he has no time
Audio control feature ??
Ara Seferian said:
Audio control feature ??
Click to expand...
Click to collapse
I am not so experienced with kernel, but I will take a look
Uh oh. This happened.
The AndroidGuy said:
Uh oh. This happened.
Click to expand...
Click to collapse
Soon you'll have to ask Google for permission before making a phone call.
peter-k said:
Soon you'll have to ask Google for permission before making a phone call.
Click to expand...
Click to collapse
Haha:silly:
New Build Is Up!
Version 1.5 (August 4, 2018)
Latest linux-stable upstream (4.4.145)
Latest CAF upstream tag merged (LA.UM.6.2.r2-04800-sdm660.0)
Add sound control
Enabled sound control by default
Added more frequencies and dropped voltage. Thanks to Mihran
Fully working on Android P
Have fun!
Great
Thx brthr for this Kernel?? and Thx for Keeping it Updated
Updates Not Showing In The CodeX Updater App...
New Version 1.5, Still Showing 1.2 New Version
great kernel, best performance on AEX. Thanks.
i'm using AEX 5.7 now, how can i flash this kernel?
should i download v1.3 and v1.4? or just v1.5 and then flash it through RWRP?
edomiredo said:
i'm using AEX 5.7 now, how can i flash this kernel?
should i download v1.3 and v1.4? or just v1.5 and then flash it through RWRP?
Click to expand...
Click to collapse
You only need to download 1.5 and flash with twrp. sorry for my bad english.
Ver 1.5 UC/OC CPU
Big: 300 -> 2.2 Ghz
Litle: 300->1.8 Ghz
nghiabh said:
You only need to download 1.5 and flash with twrp. sorry for my bad english.
Ver 1.5 UC/OC CPU
Big: 300 -> 2.2 Ghz
Litle: 300->1.8 Ghz
Click to expand...
Click to collapse
so i can customize kernel configuration with Kernel Adiutor?
edomiredo said:
so i can customize kernel configuration with Kernel Adiutor?
Click to expand...
Click to collapse
Yes
nghiabh said:
Yes
Click to expand...
Click to collapse
it is just me or v1.5 is draining too fast than v1.2?