Related
I've been in the samsung family for so long that I didn't realize how different flashing can be. I broke my phone so I bought a Moto G. Rooted it right away with only a little trouble. I installed a Lollipop ROM afterward and couldn't get my phone to boot. Guess who forgot to do a backup of the stock ROM? Yay me... but anyway, I found a stock file and went through all the steps in the screenshot. Each time, I got the okay to move on and I assumed I had the stock file flashed. Upon rebooting, I stay at the "warning, bootloader is unlocked" and phone doesn't go any further. I'm not booting up at all and custom recovery is gone now.
Can anyone help? I'm at my wit's end.
Thanks in advance.
http://forum.xda-developers.com/showthread.php?t=2542219
Follow this step by step. I did it twice. If your phone boots, it is more than likely recoverable. Once you get everything sorted out and are ready to flash a custom ROM, I recommend Carbon ROM (personal preference).
The lollipop ones are still shaky. I would try em out but they truly aren't daily drivers yet
---------- Post added at 11:19 AM ---------- Previous post was at 11:01 AM ----------
Another thought. You have your bootloader unlocked. You can flash the TWRP image through fastboot. Then you can flash the "flashable zip" stock firmware
BBobby said:
http://forum.xda-developers.com/showthread.php?t=2542219
Follow this step by step. I did it twice. If your phone boots, it is more than likely recoverable. Once you get everything sorted out and are ready to flash a custom ROM, I recommend Carbon ROM (personal preference).
The lollipop ones are still shaky. I would try em out but they truly aren't daily drivers yet
---------- Post added at 11:19 AM ---------- Previous post was at 11:01 AM ----------
Another thought. You have your bootloader unlocked. You can flash the TWRP image through fastboot. Then you can flash the "flashable zip" stock firmware
Click to expand...
Click to collapse
That's actually the instructions I used to try to flash back to stock. But when it reboots, it never gets past the warning about bootloader. I can get the TWRP recovery back but from there is there another way to flash the "flashable zip"? With Samsung I could always use ODIN but I don't think it works with Moto G. I can't get the zip to internal storage to flash it.
Thanks for the reply by the way I'm going to try it one more time I think....
http://forum.xda-developers.com/showthread.php?t=2854688
Flashable stock zips. I don't have a PC to do a full reset. But with TWRP and the flashable stock zip I have had absolutely no problem.
If all else fails I would give it a shot
I have the xt 1032 cricket/aio. I am using stock "us retail" and it works just fine. If you have radio issues etc there is also a repository of flashable radio images
BBobby said:
http://forum.xda-developers.com/showthread.php?t=2854688
Flashable stock zips. I don't have a PC to do a full reset. But with TWRP and the flashable stock zip I have had absolutely no problem.
If all else fails I would give it a shot
I have the xt 1032 cricket/aio. I am using stock "us retail" and it works just fine. If you have radio issues etc there is also a repository of flashable radio images
Click to expand...
Click to collapse
I hate sounding dumb... but how will I flash the zip if I can't get it on my phone?
Get back TWRP custom recovery by booting your phone into bootloader and flash via fastboot. You can get the .IMG file for the falcon from their website latest version is 2.8.5.0
http://teamw.in/project/twrp2/233
Then simply install the corresponding stock flashable zip
BBobby said:
Get back TWRP custom recovery by booting your phone into bootloader and flash via fastboot. You can get the .IMG file for the falcon from their website latest version is 2.8.5.0
http://teamw.in/project/twrp2/233
Then simply install the corresponding stock flashable zip
Click to expand...
Click to collapse
Thank you for all your help. I'll give that a shot.
BBobby said:
Get back TWRP custom recovery by booting your phone into bootloader and flash via fastboot. You can get the .IMG file for the falcon from their website latest version is 2.8.5.0
http://teamw.in/project/twrp2/233
Then simply install the corresponding stock flashable zip
Click to expand...
Click to collapse
Quick question. When I go into recovery to flash the zip, do I go to 'advanced' and then ' terminal command'? and go from there? I feel like a noob and I've flashed dozens of roms...
To flash a zip, choose the install option, find the name of the zip, select it, swipe to install it.
audit13 said:
To flash a zip, choose the install option, find the name of the zip, select it, swipe to install it.
Click to expand...
Click to collapse
The problem is that I didn't make a backup. When I tried flashing back to stock using fastboot everything was wiped. I don't even have the original custom ROM that started the whole mess. The stock file flashed but phone won't boot. I never get passed the boot loader warning screen. I did everything to the tee (following the directions that BBobby posted above. Actually did it twice. Isn't there an ODIN type deal for this phone. Brand new and I've broke it dangit.
Oh and I can't get into the phone to enable us debugging.
There is rsd lite but it may not help. Odin doesn't help if you can't enter download mode too. Usb debugging isn't require to flash a rom or install recovery.
It sounds like your phone is not booting because of the bootloade or the data partition is messed up.
I can get into bootloader and I have TWRP installed and can boot into it. I'm starting to think it's a lost cause. Thanks though y'all.
stacalicious said:
I can get into bootloader and I have TWRP installed and can boot into it. I'm starting to think it's a lost cause. Thanks though y'all.
Click to expand...
Click to collapse
I also got similar problem as yours. I have xt1033 dual sim phone and i had flashed lollipop 5.0.2 soak version. When official update was released for xt1033 i got back to kitkat 4.4.4 to download ota. But when i flashed kitkat through fastboot it got stuck on unlocked bootloader screen. Only solution i got still is converting to gpe. Only Gpe firmware boots. Im still finding solution for bootloop
You can get into TWRP? What happens when you use it to flash a custom ROM?
BBobby said:
http://forum.xda-developers.com/showthread.php?t=2542219
Follow this step by step. I did it twice. If your phone boots, it is more than likely recoverable. Once you get everything sorted out and are ready to flash a custom ROM, I recommend Carbon ROM (personal preference).
The lollipop ones are still shaky. I would try em out but they truly aren't daily drivers yet
---------- Post added at 11:19 AM ---------- Previous post was at 11:01 AM ----------
Another thought. You have your bootloader unlocked. You can flash the TWRP image through fastboot. Then you can flash the "flashable zip" stock firmware
Click to expand...
Click to collapse
audit13 said:
You can get into TWRP? What happens when you use it to flash a custom ROM?
Click to expand...
Click to collapse
I originally flashed a custom ROM but it never would get past the loading screen. I went through all the steps to flash back to stock and now all my data is gone. The ROM I had in my download folder is gone as is all my other info. So I get into TWRP but there's nothing in my phone I can flash.
audit13 said:
You can get into TWRP? What happens when you use it to flash a custom ROM?
Click to expand...
Click to collapse
I've flashed dozens, probably hundreds of ROMs in the past and never ran into such an issue. Custom ROM seemed to take, but got stuck. So I used fastboot and followed the directions to the tee in this link http://forum.xda-developers.com/showthread.php?t=2542219
When the ROM is finished flashing (stock that is) it never gets past the bootloader warning screen. If I could just get a zip onto the phone, I could flash through TWRP but I have no idea how to or if it's even possible.
Cwm have a option "sdcard mount" via usb. I dont remember the specific option but you can mount your device and connect it to a computer.
esd316 said:
Cwm have a option "sdcard mount" via usb. I dont remember the specific option but you can mount your device and connect it to a computer.
Click to expand...
Click to collapse
So I got into cwm. I can't mount usb storage, but I have an option to use adb sideload? Can I flash stock from there?
http://teamw.in/project/twrp2/233
Instructions on how to flash via fastboot are there in the same download page
---------- Post added at 02:47 AM ---------- Previous post was at 02:43 AM ----------
stacalicious said:
Quick question. When I go into recovery to flash the zip, do I go to 'advanced' and then ' terminal command'? and go from there? I feel like a noob and I've flashed dozens of roms...
Click to expand...
Click to collapse
The moto g just needs to do a wipe. Advanced wipe is not necessary. Then install the zip from the folder. By the way you can flash from USB otg (USB storage device such as a flash drive)
I fixed it!!!
stacalicious said:
I originally flashed a custom ROM but it never would get past the loading screen. I went through all the steps to flash back to stock and now all my data is gone. The ROM I had in my download folder is gone as is all my other info. So I get into TWRP but there's nothing in my phone I can flash.
Click to expand...
Click to collapse
esd316 said:
Cwm have a option "sdcard mount" via usb. I dont remember the specific option but you can mount your device and connect it to a computer.
Click to expand...
Click to collapse
I'd hug your neck right now if I could get to you!!! I flashed cwm, went to adb sideload and installed a stock rom. My phone is back up and money isn't going to be pissed into the wind because I made a mistake. Thanks to everyone for your help.
HI all, I have CM12 installed on my rooted phone and this morning when I switched it on, I got a message saying:
"WARNING: Update Cyanogen recovery is disabled. This may cause issues with updating your device. Please enable Update Cyanogen recovery in developer options"
Now, that option is off because I have my custom recovery TWRP installed on the phone, I'd like to keep that and I don't want to reinstall it after the update, so I believe I should ignore the message, but what I wanted to check with you guys is whether ignoring it will in fact cause any issues as this is the first time ever I've seen this message (this update by the way I think is the first one after installing CM12).
Any idea?
thanks
Disregard the message.
Thanks Heisenberg,
I did that but when the phone restarts trying to install the update, it goes straight into recovery mode (TWRP) and from there I don't think I can install the update, as none of the options seem to allow me to do so, see screenshot http://s23.postimg.org/6d6s7wyq3/IMG_20150625_135453.jpg
All right, I downloaded the zip from here http://cyanogen-ota-bacon.somee.com/ and tried to flash it from TWRP, but I get an error, screenshot here http://s28.postimg.org/zb06wtcpp/OTA_error.jpg, any idea why?
Same here, got an error in TWRP logs that prevented the update to install.
I'd like to avoid reflashing stock recovery only to install the update...
Heres the log: http://s29.postimg.org/njqqqlfc7/Screenshot_2015_06_25_08_49_42.png
Seems something related to outdated "build fingerprint" my device has currently 12.0-YNG1TAS17L
I guess the alternative would be to do it thru Cyanogen Recovery, but let's see what more knowledgeable members have to say as, like you, I don't want to have to reinstall TWRP and SU just for the sake of the update
Looks like you cant use the official update with TWRP. Either flash it via cyanogen recovery then flash back TWRP, or use a differnt zip for update not the official
Thanks for clarifying that davebugyi, then so be it, I'll do it thru cyanogen recovery and then reflash TWRP and probably SU as well
thanks
davebugyi said:
Looks like you cant use the official update with TWRP. Either flash it via cyanogen recovery then flash back TWRP, or use a differnt zip for update not the official
Click to expand...
Click to collapse
Ah, sorry forgot to ask, is there an unofficial update? If so where do I get it from?
davebugyi said:
Looks like you cant use the official update with TWRP. Either flash it via cyanogen recovery then flash back TWRP, or use a differnt zip for update not the official
Click to expand...
Click to collapse
duratto said:
Ah, sorry forgot to ask, is there an unofficial update? If so where do I get it from?
Click to expand...
Click to collapse
For example here: http://forum.xda-developers.com/showthread.php?t=2810365
thanks! Ah OK I see so that's the whole ROM there as opposed to just an update
davebugyi said:
For example here: http://forum.xda-developers.com/showthread.php?t=2810365
Click to expand...
Click to collapse
Do you mean flashing only this update found at the end of the first post?
YNG1TAS2I3 Radio, etc - Mirror - Same as YNG1TAS0YL
md5 - 6d5db5af6c92b814b9a0ebd18341dd8e
Click to expand...
Click to collapse
Is it safe to flash only that zip from TWRP over the stock Cyanogen OS?
Yes, but if I'm not mistaken, judging from the file size, that's the whole ROM
tsnake said:
Do you mean flashing only this update found at the end of the first post?
Is it safe to flash only that zip from TWRP over the stock Cyanogen OS?
Click to expand...
Click to collapse
The file I quoted is not a whole ROM, it's 31 MB.
AH OK, sorry I thught you referred to the 500mb file
Apparently even by enabling cyanogen recovery, I still can't get the updated installed as the phone keeps rebooting in the TWRP recovery, which is very odd.
I'm having the same issue. Anyone?
Got the same problem. Any idea?
duratto said:
Apparently even by enabling cyanogen recovery, I still can't get the updated installed as the phone keeps rebooting in the TWRP recovery, which is very odd.
Click to expand...
Click to collapse
Bump for a fix?
Juergen1337 said:
Got the same problem. Any idea?
Click to expand...
Click to collapse
The solution seems to be installing the new ROM provided. Related problem here http://forum.xda-developers.com/oneplus-one/help/twrp-cm-android-version-mismatch-t3147658
hey guys i got the update this morning on my stock rooted k1 and tried to flash with flashfire, it went through fine and i kept twrp and root, but after a half an hour it rebooted and was stuck in a bootloop so i used my marshmallow backup i made with twrp to get my tablet back working.
has anyone else had this problem or how has everyone else got to nougat?
You are not alone. However, if you had AC Adapter plugged in, thats the main cause for boot loops.
I also wrote a little guide get rid of that. Maybe it helps you as well to get it to work.
https://forum.xda-developers.com/sh...ac-adapter-t3554261/post70972599#post70972599
Got exactly same problem...
Easiest and the fastest way to fix was for me flashing via fastboot blop GtrCraft provided and you are done.
No other actions needed.
GL
ren7o said:
Got exactly same problem...
Easiest and the fastest way to fix was for me flashing via fastboot blop GtrCraft provided and you are done.
No other actions needed.
GL
Click to expand...
Click to collapse
so all i have to do is use flashfire to update to nougat then boot to bootloader and flash the blob file with fastboot?
will i lose any data flashing the blob file?
Robgee789 exactly! No data loss! HF
ren7o said:
Robgee789 exactly! No data loss! HF
Click to expand...
Click to collapse
Thanks mate I'll have a go at this when I get back
No problem! Also thank you GtrCraft for blob!
Same issue here, same fix worked. (just step 4) Thanks all.
hey guys this worked for me the blob file has everything in check, so when (or if) the next update comes can you just use flashfire again or do we need a new blob file?
For explaining... Flashfire got some problems with flashing bootloader... so you have to flash blob manualy. I think new blob is needed only with new major Android update 6.0 > 7.0 etc... So it should be ok to just use Flashfire with small ROM updates. But I suggest flashing always new blob if new version is released... Hope Flashfire will fix that issue in the future! GL
Hi,
I have a VZW Quark that's been unlocked with Sunshine and rooted and running fine on custom ROM's for a year. Today I did a factory reset and complete wipe and reinstalled RR Rom and GApps etc. However, on reboot, it only goes back to recovery (TWRP 3.1.1-0). I faced this the last time as well and managed to find the fix by googling it but can't seem to get to it now. It was a quick fix and then it booted to system fine and I cannot remember it. Can anyone help! Thanks.
Rikhit said:
Hi,
I have a VZW Quark that's been unlocked with Sunshine and rooted and running fine on custom ROM's for a year. Today I did a factory reset and complete wipe and reinstalled RR Rom and GApps etc. However, on reboot, it only goes back to recovery (TWRP 3.1.1-0). I faced this the last time as well and managed to find the fix by googling it but can't seem to get to it now. It was a quick fix and then it booted to system fine and I cannot remember it. Can anyone help! Thanks.
Click to expand...
Click to collapse
Someone else had this issue and they solved it by flashing the latest @bhb27 modded TWRP. You say you have TWRP 3.1.1, but is it from the TWRP website or from @bhb27? Flash this one below to make sure.
twrp-3.1.1-mod_2-quark.img
https://androidfilehost.com/?w=files&flid=39562
Once they flashed it, they were able to boot to system, then they booted back to TWRP (on purpose) -- and then upon subsequent reboots everything was fine.
See here:
mpro420 said:
@bhb27 Im face a problem, since I do a clean install build 08/23, when my phone restart, it always boot into TWRP, and I need to boot to bootloader and press START to start system normally.
Maybe Im doing something worng due the install process, (full wipe include internal storage, flash Crdroid, flash Gapps, reboot), I try to flash boot.img and new TWRP 3.1.1 recovery.img, but got a same results.
Please help, thanks a lot.
我從使用 Tapatalk 的 DROID Turbo 發送
Click to expand...
Click to collapse
bhb27 said:
You may not be using the TWRP made by me, check TWRP thread and use the twrp-3.1.1-mod_2-quark.img version that is in the afh mirror folder if you are not using that... also try to update the ROM as 8/23 is one month old on updates...
Click to expand...
Click to collapse
mpro420 said:
Thank you!!
After flash the TWRP 3.1.1-mod 2, my phone booting is back to normal. :good
ps: I want to donate to your hard work, but I dont had a Paypal account, its there other way I can buy you a beer?
我從使用 Tapatalk 的 DROID Turbo 發送
Click to expand...
Click to collapse
bhb27 said:
Mod TWRP can cleanup the "android to recovery commands" the process was changed in nougat and official or old version don't have the new support...
From outside of Brazil that is the only option that I can received and use what I have received...
:good:
Click to expand...
Click to collapse
Hi guys
I was trying some of custom rom on my OP6 and I wanted to go back to Oxygen OS. So i did a clean installation with system wipe and i flashed the last full OTA update. But since i can't boot to system anymore, TWRP always displays that there is no OS installed despite the fact that I've tried several rom . Is this the first time it's done this to me how can I fix it?
raptax said:
Hi guys
I was trying some of custom rom on my OP6 and I wanted to go back to Oxygen OS. So i did a clean installation with system wipe and i flashed the last full OTA update. But since i can't boot to system anymore, TWRP always displays that there is no OS installed despite the fact that I've tried several rom . Is this the first time it's done this to me how can I fix it?
Click to expand...
Click to collapse
The best suggestion I can give you is to flash stock oos with TWRP, reboot to stock recovery, without flashing anything else, wipe data from stock recovery and startup system.. if it is working you can flash back TWRP and magisk if you need it
Just be careful because at your point is easy to lose all of your stored data
Hitman478™ said:
The best suggestion I can give you is to flash stock oos with TWRP, reboot to stock recovery, without flashing anything else, wipe data from stock recovery and startup system.. if it is working you can flash back TWRP and magisk if you need it
Just be careful because at your point is easy to lose all of your stored data
Click to expand...
Click to collapse
I tried your solution ..... and it worked thx man
I don't know why there was a problem with TWRP but the important thing is that my phone is alive again
raptax said:
I tried your solution ..... and it worked thx man
I don't know why there was a problem with TWRP but the important thing is that my phone is alive again
Click to expand...
Click to collapse
Exactly! I'm glad to had help you sometimes if something is done wrong TWRP is dangerous
raptax said:
I tried your solution ..... and it worked thx man
I don't know why there was a problem with TWRP but the important thing is that my phone is alive again
Click to expand...
Click to collapse
If you wipe system, then flash oos ROM, TWRP will think there is no os. You can just ignore and boot.
Wiping system then flashing any time will make twrp display "no os installed" it does this because it hasn't created files for twrp to check if you have a ton installed. Flashing twrp then rebooting to twrp fixes it.
Reboot to stock recovery?
Hitman478™ said:
The best suggestion I can give you is to flash stock oos with TWRP, reboot to stock recovery, without flashing anything else, wipe data from stock recovery and startup system.. if it is working you can flash back TWRP and magisk if you need it
Just be careful because at your point is easy to lose all of your stored data
Click to expand...
Click to collapse
Hi, need a little bit of support, since I'm new to this as well. I was in a working OOS open beta 25/28, but then I think I flashed the wrong zip (OOS 9.0.9?), and I was not able to boot to system. It kept going to "bootloader unlocked" screen and custom recovery. Currently in TWRP blu_spark 3.3.1-x v. 9.109, and it's showing me no OS installed when I attempt to reboot. I haven't rebooted to system yet.
All the folders in my /sdcard is gibberish... if I try to push a file to it, it says "Required key not available." I did remove all security/passwords from my phone before doing any updates/backups.
I completed a wipe cache/dalvik/system via TWRP, and flashed the OOS OTA stable Android 10 zip downloaded directly from OnePlus Support. Considering this situation, do you still think it's safe for me to reboot to system? Then how do I get to stock recovery from there--is that by holding down the buttons?
5xonlineage said:
Hi, need a little bit of support, since I'm new to this as well. I was in a working OOS open beta 25/28, but then I think I flashed the wrong zip (OOS 9.0.9?), and I was not able to boot to system. It kept going to "bootloader unlocked" screen and custom recovery. Currently in TWRP blu_spark 3.3.1-x v. 9.109, and it's showing me no OS installed when I attempt to reboot. I haven't rebooted to system yet.
All the folders in my /sdcard is gibberish... if I try to push a file to it, it says "Required key not available." I did remove all security/passwords from my phone before doing any updates/backups.
I completed a wipe cache/dalvik/system via TWRP, and flashed the OOS OTA stable Android 10 zip downloaded directly from OnePlus Support. Considering this situation, do you still think it's safe for me to reboot to system? Then how do I get to stock recovery from there--is that by holding down the buttons?
Click to expand...
Click to collapse
No, your internal storage Is like trash cause the last rom you flashed has older security patch than oos10. Your device Is now encrypted and wont boot to system. I Guess you have to erase all via MSN tool or fastboot signed rom. Even if you wiped what mentioned above, your problem still be the data.
Fastboot method?
°Washy said:
No, your internal storage Is like trash cause the last rom you flashed has older security patch than oos10. Your device Is now encrypted and wont boot to system. I Guess you have to erase all via MSN tool or fastboot signed rom. Even if you wiped what mentioned above, your problem still be the data.
Click to expand...
Click to collapse
Thank you for replying. I'm relieved that you know of a couple methods to try.
Is using "Format Data" in TWRP an option for dealing with the encryption??
For the MSN tool, can I use this one? Tried looking around, but it's unclear. "[TOOL] MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)" https://forum.xda-developers.com/on...wnloadtool-v4-0-international-t3798892/page10
I would be more comfortable with using fastboot, but am I at any risk of having lost fastboot, or can I just turn off my device from TWRP right now and hold down the buttons to get there? Afraid to move out of TWRP right now, in case I can't get back. I do have twrp-3.3.1-18-enchilada-Q-mauronofrio.img that I can run from fastboot if needed.
By "signed rom," do you mean I can simply flash one of the zips here from fastboot? "[OnePlus 6][ROM][OTA][Oxygen OS] Mirrors for official Oxygen OS ROMs and OTA updates" https://forum.xda-developers.com/oneplus-6/how-to/oneplus-6-mirrors-official-oxygen-os-t3792244
Thanks again.
5xonlineage said:
Thank you for replying. I'm relieved that you know of a couple methods to try.
Is using "Format Data" in TWRP an option for dealing with the encryption??
For the MSN tool, can I use this one? Tried looking around, but it's unclear. "[TOOL] MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)" https://forum.xda-developers.com/on...wnloadtool-v4-0-international-t3798892/page10
I would be more comfortable with using fastboot, but am I at any risk of having lost fastboot, or can I just turn off my device from TWRP right now and hold down the buttons to get there? Afraid to move out of TWRP right now, in case I can't get back. I do have twrp-3.3.1-18-enchilada-Q-mauronofrio.img that I can run from fastboot if needed.
By "signed rom," do you mean I can simply flash one of the zips here from fastboot? "[OnePlus 6][ROM][OTA][Oxygen OS] Mirrors for official Oxygen OS ROMs and OTA updates" https://forum.xda-developers.com/oneplus-6/how-to/oneplus-6-mirrors-official-oxygen-os-t3792244
Thanks again.
Click to expand...
Click to collapse
I hardbricked my device about 10 times and i was able to recovery It even from a blank screen. Btw format data Will erase all your data but also the internal storage. About fastboot dont be afraid, go under twrp reboot section and reboot to bootloader. Then go under xda op6 guide section and search for mirrors for fastboot rom guide by Mauronofrio. He pushed my ass out the **** a lot of time.
P.s. Sorry but I dunno how to paste a link via xda app. Yes, ik! It's a vert newbie thing.
5xonlineage said:
Thank you for replying. I'm relieved that you know of a couple methods to try.
Is using "Format Data" in TWRP an option for dealing with the encryption??
For the MSN tool, can I use this one? Tried looking around, but it's unclear. "[TOOL] MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)" https://forum.xda-developers.com/on...wnloadtool-v4-0-international-t3798892/page10
I would be more comfortable with using fastboot, but am I at any risk of having lost fastboot, or can I just turn off my device from TWRP right now and hold down the buttons to get there? Afraid to move out of TWRP right now, in case I can't get back. I do have twrp-3.3.1-18-enchilada-Q-mauronofrio.img that I can run from fastboot if needed.
By "signed rom," do you mean I can simply flash one of the zips here from fastboot? "[OnePlus 6][ROM][OTA][Oxygen OS] Mirrors for official Oxygen OS ROMs and OTA updates" https://forum.xda-developers.com/oneplus-6/how-to/oneplus-6-mirrors-official-oxygen-os-t3792244
Thanks again.
Click to expand...
Click to collapse
Do you solve, man?
Fastboot ROM
°Washy said:
I hardbricked my device about 10 times and i was able to recovery It even from a blank screen. Btw format data Will erase all your data but also the internal storage. About fastboot dont be afraid, go under twrp reboot section and reboot to bootloader. Then go under xda op6 guide section and search for mirrors for fastboot rom guide by Mauronofrio. He pushed my ass out the **** a lot of time.
P.s. Sorry but I dunno how to paste a link via xda app. Yes, ik! It's a vert newbie thing.
Click to expand...
Click to collapse
That's awesome, I'm starting to grasp how much of a genius Mauronofrio is, after so many people referencing his work.
In his guide, he says, "These ROMs can't be used to update or downgrade your phone but just to restore your phone, so don't use them to come back to oreo or to update from oreo to pie." This may be a dumb question, but how do I know which zip/OOS version to flash, when I don't have a functioning OS on my phone?
5xonlineage said:
That's awesome, I'm starting to grasp how much of a genius Mauronofrio is, after so many people referencing his work.
In his guide, he says, "These ROMs can't be used to update or downgrade your phone but just to restore your phone, so don't use them to come back to oreo or to update from oreo to pie." This may be a dumb question, but how do I know which zip/OOS version to flash, when I don't have a functioning OS on my phone?
Click to expand...
Click to collapse
I talked with Mauronofrio in pm and he said me that you could solve your issue simply flash the ROM you want and format data after flash that one. Remember that your internal will be wiped but it would happen in any scenario we talked.
Magisk, boot img?
°Washy said:
I talked with Mauronofrio in pm and he said me that you could solve your issue simply flash the ROM you want and format data after flash that one. Remember that your internal will be wiped but it would happen in any scenario we talked.
Click to expand...
Click to collapse
That worked! And starstruck that you were able to check that with him. I flashed Mauronofrio's fastboot ROM for 10.3.2 and it rebooted (WOW). I clicked through the Google setup pages and checked that my data and wifi worked.
I then went back into fastboot, booted M's twrp img, fomatted data, and then installed twrp-3.3.1-x_blu_spark_v9.109_op6.zip, rebooted into recovery.
Then I think I made a mistake, because I installed Magisk-v20.4.zip. It succeeded, but now I can't boot into system anymore. Is it too late to flash the 10.3.2 boot.img?
5xonlineage said:
That worked! And starstruck that you were able to check that with him. I flashed Mauronofrio's fastboot ROM for 10.3.2 and it rebooted (WOW). I clicked through the Google setup pages and checked that my data and wifi worked.
I then went back into fastboot, booted M's twrp img, fomatted data, and then installed twrp-3.3.1-x_blu_spark_v9.109_op6.zip, rebooted into recovery.
Then I think I made a mistake, because I installed Magisk-v20.4.zip. It succeeded, but now I can't boot into system anymore. Is it too late to flash the 10.3.2 boot.img?
Click to expand...
Click to collapse
No. Just flash stock boot image if magisk broke something.
Rooted
°Washy said:
No. Just flash stock boot image if magisk broke something.
Click to expand...
Click to collapse
I ended up following the guide to Magisk Root without TWRP for OnePlus 6 Oxygen OS https://forum.xda-developers.com/oneplus-6/how-to/patched-boot-image-magisk-16-7-beta-t3818853 since it was referenced by Mauronofrio's post for having issues getting his TWRP to work with latest Magisk.
Someone posted a patched boot.img for 10.3.2, so now I'm rooted without TWRP. Priorities. Now all I need is for special characters and emojis to work Will keep an eye on other threads.
I'm learning a lot, thanks so much for all your help. You pointed me in the right direction when I was not sure what the hell to do!
5xonlineage said:
I ended up following the guide to Magisk Root without TWRP for OnePlus 6 Oxygen OS https://forum.xda-developers.com/oneplus-6/how-to/patched-boot-image-magisk-16-7-beta-t3818853 since it was referenced by Mauronofrio's post for having issues getting his TWRP to work with latest Magisk.
Someone posted a patched boot.img for 10.3.2, so now I'm rooted without TWRP. Priorities. Now all I need is for special characters and emojis to work Will keep an eye on other threads.
I'm learning a lot, thanks so much for all your help. You pointed me in the right direction when I was not sure what the hell to do!
Click to expand...
Click to collapse
I followed that thread for the first A10 release cause there wasn't a worked twrp yet. You are welcome man, when I feel myself usefull I always try to help.