Related
Hi
Since updating my OPO to YOG4PAS1N0 I couldn't reboot my OPO. Since the last update it won't even boot any more. I've reflashed to stock 4.4.4, installed every update and had the same issue. I even tried to flash the zip true recovery, but i got an error while doing it. So, after three times of updating, I'm back to square one.
After going back to stock I have to factory reset in recovery, otherwise the OPO won't boot.
But of course I'd like to install Lollipop (and later Marshmallow). What can I do? I have a Mac with OSX 10.11 and a laptop with Windows 7, so I'm able to use both.
I did the flashing on my Macbook with the Toolkit found here. But I don't think there's an issue with this, as it uses the terminal. It's just easier then to type it all myself
Thanks in advance.
erdeebee said:
Hi
Since updating my OPO to YOG4PAS1N0 I couldn't reboot my OPO. Since the last update it won't even boot any more. I've reflashed to stock 4.4.4, installed every update and had the same issue. I even tried to flash the zip true recovery, but i got an error while doing it. So, after three times of updating, I'm back to square one.
After going back to stock I have to factory reset in recovery, otherwise the OPO won't boot.
But of course I'd like to install Lollipop (and later Marshmallow). What can I do? I have a Mac with OSX 10.11 and a laptop with Windows 7, so I'm able to use both.
I did the flashing on my Macbook with the Toolkit found here. But I don't think there's an issue with this, as it uses the terminal. It's just easier then to type it all myself
Thanks in advance.
Click to expand...
Click to collapse
It'd help if you actually posted what errors you're getting, without information like that it's virtually impossible to troubleshoot. Anyway, your best bet is probably just to flash the stock images with fastboot. Back up anything important first as this will wipe your device. See section 8 of my guide:
http://forum.xda-developers.com/oneplus-one/general/guides-bacon-timmaaas-how-to-guides-t2839471
The only error I got, was that it's impossible to boot. I'll try your guide asap
Heisenberg said:
It'd help if you actually posted what errors you're getting, without information like that it's virtually impossible to troubleshoot. Anyway, your best bet is probably just to flash the stock images with fastboot. Back up anything important first as this will wipe your device. See section 8 of my guide:
http://forum.xda-developers.com/oneplus-one/general/guides-bacon-timmaaas-how-to-guides-t2839471
Click to expand...
Click to collapse
I unlocked the bootloader.
I installed the latest fastboot image.
Now my OPO is stuck again at the 1+ / Powered by Android-screen. I can't boot into recovery, but fastboot mode is still possible.
Everything up to cm-12.0-YNG1TAS2XK-bacon-signed-fastboot seems to work fine.
erdeebee said:
I unlocked the bootloader.
I installed the latest fastboot image.
Now my OPO is stuck again at the 1+ / Powered by Android-screen. I can't boot into recovery, but fastboot mode is still possible.
Click to expand...
Click to collapse
erdeebee said:
Everything up to cm-12.0-YNG1TAS2XK-bacon-signed-fastboot seems to work fine.
Click to expand...
Click to collapse
Is there a reason you're using that particular build instead of the latest? How are you installing it?
Heisenberg said:
Is there a reason you're using that particular build instead of the latest? How are you installing it?
Click to expand...
Click to collapse
I'm sorry, I thought my message was clear. The latest build gives the same problem. With this build, I'm able to boot. I installed this in terminal as a fastboot-images.
This guy has the exact same problem.
erdeebee said:
This guy has the exact same problem.
Click to expand...
Click to collapse
Assuming that you want to upgrade your OPO to latest available version of Cyanogen
- Flash latest *fastboot* image from here http://forum.xda-developers.com/oneplus-one/general/official-cm11s-roms-ota-updates-t2906746
- If you have already tried above step, flash cm-12.0-YNG1TAS2I3-bacon-signed-fastboot.zip and then upgrade via OTA incremental update zip
Mr hOaX said:
Assuming that you want to upgrade your OPO to latest available version of Cyanogen
- Flash latest *fastboot* image from here http://forum.xda-developers.com/oneplus-one/general/official-cm11s-roms-ota-updates-t2906746
- If you have already tried above step, flash cm-12.0-YNG1TAS2I3-bacon-signed-fastboot.zip and then upgrade via OTA incremental update zip
Click to expand...
Click to collapse
I've tried the first, didn't work. I've tried flashing 11S and started upgrading. I didn't have issues until 12.0. When I got to 12.1 I couldn't reboot (but I could shut down and boot). With the latest update I couldn't even boot normally.
Anyone has some idea?
Verstuurd vanaf mijn A0001 met Tapatalk
erdeebee said:
Anyone has some idea?
Verstuurd vanaf mijn A0001 met Tapatalk
Click to expand...
Click to collapse
Not sure if its a language barrier but first of you are going to have to supply more information than that. Secondly what have you tried to fix it and especially since there are tutorial out the waaaaahzooo in here on how to repair your "bricked" phone.
Please research make some attempts and if any issue please document in full what your issue is. I guarantee you though whatever it is someone here has gone through it already so search thorough
playya said:
Not sure if its a language barrier but first of you are going to have to supply more information than that. Secondly what have you tried to fix it and especially since there are tutorial out the waaaaahzooo in here on how to repair your "bricked" phone.
Please research make some attempts and if any issue please document in full what your issue is. I guarantee you though whatever it is someone here has gone through it already so search thorough
Click to expand...
Click to collapse
What I have tried is on page 1 of this thread.
I tried to install 4.4.4 with a flashable zip and then installed all updates. I installed the 5.1.1 zip. I installed the fastboot 5.1.1 and 4.4.4 and installed all updates.
Now I'm on 5.0.
On the last update I couldn't update reboot or boot anymore. The update before that I couldn't reboot, bu I could boot.
erdeebee said:
What I have tried is on page 1 of this thread.
I tried to install 4.4.4 with a flashable zip and then installed all updates. I installed the 5.1.1 zip. I installed the fastboot 5.1.1 and 4.4.4 and installed all updates.
Now I'm on 5.0.
On the last update I couldn't update reboot or boot anymore. The update before that I couldn't reboot, bu I could boot.
Click to expand...
Click to collapse
My bad on that did not even realize there was another page.. dont know how that happened... Wow I say just start from scratch and go to cm page and download the latest stock software. I am sorry I see others have tried to help you and to be honest your breakdown is a lil confusing. NO worries though hopefully someone will come along to help
Okay, many of us don't do this everyday but I flashed TWRP 3.0.2.0 on my OPO and needed to go back to 2.8.6.0 to use jgcaap's MM build.
So i tried flashing 2.8.6.0 img file from 3.0.2 and guess what happened? No. It didn't downgrade it self, instead I lost my recovery. My phone rebooted straight to system after being stuck on Bootlogo for a while. So I flash the recovery AGAIN via fastboot, flashify, RashR, Flashfire, Mobile Terminal whatever I could think of. But nope, same result whatsoever. Flashing other recoveries doesn't work either. Same errors return.
Then I thought of flashing 3.0.0.0 instead of 2.8.6.0 and yes, flashing 3.0.0.0 from 3.0.2.0 worked indeed. Then I started to download all the recovery files till 2.8.6.0 and started flashing them one after another, step by step climbing down the number and it kept downgrading but ONE version down at a time, if I try to skip it returns the same bs as before. Then flashing down until I reached 2.8.6.0 and then flashed that too via RashR. And surprise! Surorise! The recovery version I needed was not working. It would be flashed then the recovery would disappear and it would go into a no recovery state like before again. Then I'd flash 2.8.6.1 and get recovery back. And now finally after all the endeavor I'm on 2.8.6.1.
Anybody might know the reason of this stupid anomaly? And why it doesn't work?
And also why I can't flash ANY OTHER recovery?
Unnecessary screenshot attached :good: enjoy~
Tiash420 said:
Okay, many of us don't do this everyday but I flashed TWRP 3.0.2.0 on my OPO and needed to go back to 2.8.6.0 to use jgcaap's MM build.
So i tried flashing 2.8.6.0 img file from 3.0.2 and guess what happened? No. It didn't downgrade it self, instead I lost my recovery. My phone rebooted straight to system after being stuck on Bootlogo for a while. So I flash the recovery AGAIN via fastboot, flashify, RashR, Flashfire, Mobile Terminal whatever I could think of. But nope, same result whatsoever. Flashing other recoveries doesn't work either. Same errors return.
Then I thought of flashing 3.0.0.0 instead of 2.8.6.0 and yes, flashing 3.0.0.0 from 3.0.2.0 worked indeed. Then I started to download all the recovery files till 2.8.6.0 and started flashing them one after another, step by step climbing down the number and it kept downgrading but ONE version down at a time, if I try to skip it returns the same bs as before. Then flashing down until I reached 2.8.6.0 and then flashed that too via RashR. And surprise! Surorise! The recovery version I needed was not working. It would be flashed then the recovery would disappear and it would go into a no recovery state like before again. Then I'd flash 2.8.6.1 and get recovery back. And now finally after all the endeavor I'm on 2.8.6.1.
Anybody might know the reason of this stupid anomaly? And why it doesn't work?
And also why I can't flash ANY OTHER recovery?
Click to expand...
Click to collapse
Did you try flashing the recovery img via TWRP itself? And are you using any theme on TWRP 3.x.x.x?
Nope no themes and I tried flashing through every method I could think of but nope, doesn't work.
Tiash420 said:
Nope no themes and I tried flashing through every method I could think of but nope, doesn't work.
Click to expand...
Click to collapse
You don't need to be on TWRP 2.8.6.0 to flash jgcaap MM build. Just use 3.0.2.0 it flashes modem and does everything the older one you're trying to get to can do.
Sent from my A0001 using Tapatalk
Renosh said:
You don't need to be on TWRP 2.8.6.0 to flash jgcaap MM build. Just use 3.0.2.0 it flashes modem and does everything the older one you're trying to get to can do.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
I get the notification quick settings bug, I mean, I can't get quick setting toggles directly from notification nor can I have a regular basic swipe lock screen. And the bugs persist no matter which ever recovery I'm flashing through and with or without Gapps. How do I get pass that? Meanwhile my friend on the other hand downloaded the same version from the same place and he doesn't face those bugs. :'| Why is this happening to me?
Tiash420 said:
I get the notification quick settings bug, I mean, I can't get quick settings directly from notification nor can I have a regular basic swipe lock screen. And the bugs persist no matter which ever recovery I'm flashing through and with or without Gapps. How do I get pass that?
Click to expand...
Click to collapse
I've been seeing mentions of flashing 21/4 build first set it up then dirty flash latest update. I also got the same issue when I last flashed jgcaap MM ROM. It would have been best to just ask for advise there than assume it's a recovery issue
Sent from my A0001 using Tapatalk
Renosh said:
I've been seeing mentions of flashing 21/4 build first set it up then dirty flash latest update. I also got the same issue when I last flashed jgcaap MM ROM. It would have been best to just ask for advise there than assume it's a recovery issue
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
I'll thank my friends who owned the OPO before I did for the recovery 'assumptions' :|
Tiash420 said:
I'll thank my friends who owned the OPO before I did for the recovery 'assumptions' :|
Click to expand...
Click to collapse
I'm guessing they insisted because of the previous problems with flashing modems for TWRP. Flash the latest 3.0.2.0 and I guarantee it'll work for every ROM only issue that still exists is if you want encryption on CM13 and that's present on all current TWRP versions
Sent from my A0001 using Tapatalk
Renosh said:
I'm guessing they insisted because of the previous problems with flashing modems for TWRP. Flash the latest 3.0.2.0 and I guarantee it'll work for every ROM only issue that still exists is if you want encryption on CM13 and that's present on all current TWRP versions
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Well doesn't matter, I flashed Sultan's unofficial CM13 build via Kumajaya's TWRP 3.0.0.0 and it works fabulously! jgcaap can wait, I'm sure it's not much different in features and stuff! :3
Hey folks; I'm hoping I can get some advice or pointers, or maybe just a slap upside the head with something I've missed.
I have one of the original Shield tablets, and played around with it quite a lot, installing various custom ROMs from the marvelous directions I've found here. When the battery thing happened, I submitted the required info and happily received my new tablet. The original was rooted and customised still, kill-switch averted, and I had two working tablets. I gave the new stock one to my wife.
But then, about three months ago, I was playing with mine again installing a newer ROM than the one I was using (I *think* I was going from an older Bliss rom to one of the Cyanogen), and ... Something Happened (tm). The tablet rebooted in the middle of everything, and now won't boot to an image.
I'm on Windows 10 now, and had some fun getting the drivers working, but they seem to. I can communicate with the tablet through Fastboot, but ADB doesn't see it. I've flashed several versions of TWRP to the tablet, and can boot into that recovery - both through Fastboot and the tablet's power+vol-dn buttons. I've used TWRP to flash several different ROMs, and it *appears* to work (there are no errors), but when I reboot the tablet .... nada. Nothing but the Nvidia boot screen for days.
So now... what have I missed? I'm a little reluctant to flash a stock ROM, but I'm at a loss. I used to have more time to fiddle and figure, and I'm afraid that my impatience is going to kill the thing.
Format system and data see if that works
You need to have the latest bootloader to run the latest roms.
Sent from my ZTE A2017U using Tapatalk
skooter32 said:
Format system and data see if that works
Click to expand...
Click to collapse
Have done, but I'll try it again. Thanks
lafester said:
You need to have the latest bootloader to run the latest roms.
Sent from my ZTE A2017U using Tapatalk
Click to expand...
Click to collapse
I've tried the latest and the not-so-latest, all with similar results.
Hnefatafl said:
I've tried the latest and the not-so-latest, all with similar results.
Click to expand...
Click to collapse
so you wan t your "burning" tablet set again stock?
Did you read about "recovery images" for shield tablet?
If fastboot is working you can flash the recovery image and all will update to the latest(blob,system,boot, etc)
flash latest twrp for shieldtablet.
after that use the nomoreota.zip to prevent the software brick from nvidida
Hnefatafl said:
Have done, but I'll try it again. Thanks
Click to expand...
Click to collapse
Also format data system to something other than ext4 then re format it back
skooter32 said:
Also format data system to something other than ext4 then re format it back
Click to expand...
Click to collapse
can I ask what that should bring?
wiQbold said:
so you wan t your "burning" tablet set again stock?
Did you read about "recovery images" for shield tablet?
If fastboot is working you can flash the recovery image and all will update to the latest(blob,system,boot, etc)
flash latest twrp for shieldtablet.
after that use the nomoreota.zip to prevent the software brick from nvidida
Click to expand...
Click to collapse
No, I don't want it stock at all, I was just worried that was my only option to get this thing to respond again. I was running BlissPop v.somethingorother, but wanted to update. That's when things went awry.
Right, well it looks like I've got this thing going. I could flash TWRP 3.1.0-0, but not any 3.1.1. Cyanogenmod 12 worked. Reading up a little more (it got slow at work for a couple of days...) I flashed the firmware to 5.0, and could now install TWRP 3.1.1-1! Then I could install (in this case) Lineage 14.1, which *almost* worked. It booted, but there's no wifi.
Then I found a suggestion - I think it was on these forums somewhere - and restarted. Wiped all data again, flashed Cyanogenmod 12, no gapps. Restarted, checked everything including wifi, and is good. Rebooted back into recovery, performed a factory reset, then installed Lineage 14.1 and gapps. When it rebooted, everything is working!
So. Firmware. Huh.
Thanks all.
Hnefatafl said:
No, I don't want it stock at all, I was just worried that was my only option to get this thing to respond again. I was running BlissPop v.somethingorother, but wanted to update. That's when things went awry.
Click to expand...
Click to collapse
do not know if you need the bootloader(blob) from nougat to boot up, that lafester told you. but that sounds plausible. skooter says something from re-formating. so if you tried that all and nothing changes? cache and data partition you wiped also, so it has to be work for my understanding.
went always stock, so can t help you..
but you can use recovery images > twrp > bliss/linage. no need to boot up stock?
wiQbold said:
can I ask what that should bring?
Click to expand...
Click to collapse
I have had similar issues and I tried everything even this plus what harm is it going to be and as the fellow below said if ur in fastboot and recovery with no issues then surely u should be flashing stick to fix Ur problem ?
Stock Android 7.0 (Nougat) for the Moto X Pure 2015 XT1575 US NPH25.200-22
TWRP Recovery Image (Includes /boot and /system only)
**Factory reset after restore is advised.**
https://drive.google.com/drive/folders/0B2lKWOIH0bTqc29NbVNWWWhsYVE?usp=sharing
**Not tested coming straight from stock 6.0 MPH24.49-18-16.**
I did an incremental OTA upgrade from stock 6.0 MPH24.49-18-8.
Use at your own risk. If you have TWRP installed your warranty is void anyway. I'm not responsible for bricking your device.
worked great for me 18-16 thanks really appropriate the work
Hi
and thx for sharing.
I have unlocked booloader and rooted, can I just flash this one with twrp?
thx in advance
the-light said:
Hi
and thx for sharing.
I have unlocked booloader and rooted, can I just flash this one with twrp?
thx in advance
Click to expand...
Click to collapse
Yes. Root is nonconsequential. You really just need twrp.
Can i just flash it over TruPureX Android 6?
(I guess i can, just want to be sure)
Where can I find Android 7 modem to flash separately?
Will it work with Android 6 modem?
newHere:) said:
Can i just flash it over TruPureX Android 6?
(I guess i can, just want to be sure)
Where can I find Android 7 modem to flash separately?
Will it work with Android 6 modem?
Click to expand...
Click to collapse
No Nougat modem is available until the flashable (non OTA) full stock 7.0 rom is made available from Motorola. This is not likely to happen. No issues have been mentioned running this update on a 6.0 modem. Not sure what the advantages are honestly. I never had problems with bt, wifi, or calls with the 6.0 modem firmware.
Create a backup beforehand and you can always go back to it.
hi i noob, i speak spanish.
I have moto x pure clark xt1575, android 6 no root, i install twrp an unlock bootloader.
I try to install this "ota" room, but fail. i restore back up and now the phone follow work
mphs24.49-18-16.
Need help how instal android 7 official, or only way custom room "lineage 14"
Thanks.
Can I flash this over Lineage OS 14.1 after a full wipe?
acoupleofdroids said:
worked great for me 18-16 thanks really appropriate the work
Click to expand...
Click to collapse
Hi talk about u experience
Greetings, it counts as you did, I have android 6.0 mphs24.49-18-16 and I can not update. Phone with bootloader unlocked and with twrp, no root
I get "invalid ZIP file format" using TWRP 3.1.1-0 on an XT1575. Was running lineageOS 14.1 but I wiped system and data before trying to install the zip. On my laptop I can open the ZIP fine and extract the files, but that doesn't help.
bussemac said:
I get "invalid ZIP file format" using TWRP 3.1.1-0 on an XT1575. Was running lineageOS 14.1 but I wiped system and data before trying to install the zip. On my laptop I can open the ZIP fine and extract the files, but that doesn't help.
Click to expand...
Click to collapse
See this thread :
https://forum.xda-developers.com/moto-x-style/general/guide-xt1575-update-to-nph25-200-22-t3680477
The OP will need to comment - he may be coming from a rooted stock ; at least according the the thread noted above - if you have installed a custom ROM ; there are other steps besides just trying to flash this
I have NOT tried the OP's method or the referenced thread - so I cannot really speak from experience ; just pointing out other resources that have additional information -
Will this work with XT1572? Just confirming.
This is not a traditional TWRP zip file. It is a backup file. You need to unzip it and put it in the backup directory. You then restore backup, choose the nph25-200-22. . . directory, and away you go!
stevejohnson42 said:
See this thread :
https://forum.xda-developers.com/moto-x-style/general/guide-xt1575-update-to-nph25-200-22-t3680477
The OP will need to comment - he may be coming from a rooted stock ; at least according the the thread noted above - if you have installed a custom ROM ; there are other steps besides just trying to flash this
I have NOT tried the OP's method or the referenced thread - so I cannot really speak from experience ; just pointing out other resources that have additional information -
Click to expand...
Click to collapse
kelru2000 said:
This is not a traditional TWRP zip file. It is a backup file. You need to unzip it and put it in the backup directory. You then restore backup, choose the nph25-200-22. . . directory, and away you go!
Click to expand...
Click to collapse
Ah, sure, OK, that makes sense, just wish that had been explained somewhere. I'll give that a shot tonight, thanks!
bussemac said:
Ah, sure, OK, that makes sense, just wish that had been explained somewhere. I'll give that a shot tonight, thanks!
Click to expand...
Click to collapse
Success? Some people have reported bootloops due to a firmware problem. I'd like to know how it went.
ptn107 said:
Success? Some people have reported bootloops due to a firmware problem. I'd like to know how it went.
Click to expand...
Click to collapse
Well it worked, sort of. It booted to stock but it wasn't stable and the play store kept crashing, I tried all the usual stuff for that, clear services & play store data, uninstall updates, finally tried a factory reset and now I'm stuck in TWRP bootloop, even if I reinstall this image.
So very much YMMV.
bussemac said:
Well it worked, sort of. It booted to stock but it wasn't stable and the play store kept crashing, I tried all the usual stuff for that, clear services & play store data, uninstall updates, finally tried a factory reset and now I'm stuck in TWRP bootloop, even if I reinstall this image.
So very much YMMV.
Click to expand...
Click to collapse
Thankfully the 7.0 stock firmware is available now. I wiped and clean flashed it and it works perfectly.
https://forum.xda-developers.com/moto-x-style/general/xt1575-moto-x-pure-edition-factory-t3704142
the link is dead
someone can help, sharing a new link? thank you
Hi guys
I was trying some of custom rom on my OP6 and I wanted to go back to Oxygen OS. So i did a clean installation with system wipe and i flashed the last full OTA update. But since i can't boot to system anymore, TWRP always displays that there is no OS installed despite the fact that I've tried several rom . Is this the first time it's done this to me how can I fix it?
raptax said:
Hi guys
I was trying some of custom rom on my OP6 and I wanted to go back to Oxygen OS. So i did a clean installation with system wipe and i flashed the last full OTA update. But since i can't boot to system anymore, TWRP always displays that there is no OS installed despite the fact that I've tried several rom . Is this the first time it's done this to me how can I fix it?
Click to expand...
Click to collapse
The best suggestion I can give you is to flash stock oos with TWRP, reboot to stock recovery, without flashing anything else, wipe data from stock recovery and startup system.. if it is working you can flash back TWRP and magisk if you need it
Just be careful because at your point is easy to lose all of your stored data
Hitman478™ said:
The best suggestion I can give you is to flash stock oos with TWRP, reboot to stock recovery, without flashing anything else, wipe data from stock recovery and startup system.. if it is working you can flash back TWRP and magisk if you need it
Just be careful because at your point is easy to lose all of your stored data
Click to expand...
Click to collapse
I tried your solution ..... and it worked thx man
I don't know why there was a problem with TWRP but the important thing is that my phone is alive again
raptax said:
I tried your solution ..... and it worked thx man
I don't know why there was a problem with TWRP but the important thing is that my phone is alive again
Click to expand...
Click to collapse
Exactly! I'm glad to had help you sometimes if something is done wrong TWRP is dangerous
raptax said:
I tried your solution ..... and it worked thx man
I don't know why there was a problem with TWRP but the important thing is that my phone is alive again
Click to expand...
Click to collapse
If you wipe system, then flash oos ROM, TWRP will think there is no os. You can just ignore and boot.
Wiping system then flashing any time will make twrp display "no os installed" it does this because it hasn't created files for twrp to check if you have a ton installed. Flashing twrp then rebooting to twrp fixes it.
Reboot to stock recovery?
Hitman478™ said:
The best suggestion I can give you is to flash stock oos with TWRP, reboot to stock recovery, without flashing anything else, wipe data from stock recovery and startup system.. if it is working you can flash back TWRP and magisk if you need it
Just be careful because at your point is easy to lose all of your stored data
Click to expand...
Click to collapse
Hi, need a little bit of support, since I'm new to this as well. I was in a working OOS open beta 25/28, but then I think I flashed the wrong zip (OOS 9.0.9?), and I was not able to boot to system. It kept going to "bootloader unlocked" screen and custom recovery. Currently in TWRP blu_spark 3.3.1-x v. 9.109, and it's showing me no OS installed when I attempt to reboot. I haven't rebooted to system yet.
All the folders in my /sdcard is gibberish... if I try to push a file to it, it says "Required key not available." I did remove all security/passwords from my phone before doing any updates/backups.
I completed a wipe cache/dalvik/system via TWRP, and flashed the OOS OTA stable Android 10 zip downloaded directly from OnePlus Support. Considering this situation, do you still think it's safe for me to reboot to system? Then how do I get to stock recovery from there--is that by holding down the buttons?
5xonlineage said:
Hi, need a little bit of support, since I'm new to this as well. I was in a working OOS open beta 25/28, but then I think I flashed the wrong zip (OOS 9.0.9?), and I was not able to boot to system. It kept going to "bootloader unlocked" screen and custom recovery. Currently in TWRP blu_spark 3.3.1-x v. 9.109, and it's showing me no OS installed when I attempt to reboot. I haven't rebooted to system yet.
All the folders in my /sdcard is gibberish... if I try to push a file to it, it says "Required key not available." I did remove all security/passwords from my phone before doing any updates/backups.
I completed a wipe cache/dalvik/system via TWRP, and flashed the OOS OTA stable Android 10 zip downloaded directly from OnePlus Support. Considering this situation, do you still think it's safe for me to reboot to system? Then how do I get to stock recovery from there--is that by holding down the buttons?
Click to expand...
Click to collapse
No, your internal storage Is like trash cause the last rom you flashed has older security patch than oos10. Your device Is now encrypted and wont boot to system. I Guess you have to erase all via MSN tool or fastboot signed rom. Even if you wiped what mentioned above, your problem still be the data.
Fastboot method?
°Washy said:
No, your internal storage Is like trash cause the last rom you flashed has older security patch than oos10. Your device Is now encrypted and wont boot to system. I Guess you have to erase all via MSN tool or fastboot signed rom. Even if you wiped what mentioned above, your problem still be the data.
Click to expand...
Click to collapse
Thank you for replying. I'm relieved that you know of a couple methods to try.
Is using "Format Data" in TWRP an option for dealing with the encryption??
For the MSN tool, can I use this one? Tried looking around, but it's unclear. "[TOOL] MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)" https://forum.xda-developers.com/on...wnloadtool-v4-0-international-t3798892/page10
I would be more comfortable with using fastboot, but am I at any risk of having lost fastboot, or can I just turn off my device from TWRP right now and hold down the buttons to get there? Afraid to move out of TWRP right now, in case I can't get back. I do have twrp-3.3.1-18-enchilada-Q-mauronofrio.img that I can run from fastboot if needed.
By "signed rom," do you mean I can simply flash one of the zips here from fastboot? "[OnePlus 6][ROM][OTA][Oxygen OS] Mirrors for official Oxygen OS ROMs and OTA updates" https://forum.xda-developers.com/oneplus-6/how-to/oneplus-6-mirrors-official-oxygen-os-t3792244
Thanks again.
5xonlineage said:
Thank you for replying. I'm relieved that you know of a couple methods to try.
Is using "Format Data" in TWRP an option for dealing with the encryption??
For the MSN tool, can I use this one? Tried looking around, but it's unclear. "[TOOL] MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)" https://forum.xda-developers.com/on...wnloadtool-v4-0-international-t3798892/page10
I would be more comfortable with using fastboot, but am I at any risk of having lost fastboot, or can I just turn off my device from TWRP right now and hold down the buttons to get there? Afraid to move out of TWRP right now, in case I can't get back. I do have twrp-3.3.1-18-enchilada-Q-mauronofrio.img that I can run from fastboot if needed.
By "signed rom," do you mean I can simply flash one of the zips here from fastboot? "[OnePlus 6][ROM][OTA][Oxygen OS] Mirrors for official Oxygen OS ROMs and OTA updates" https://forum.xda-developers.com/oneplus-6/how-to/oneplus-6-mirrors-official-oxygen-os-t3792244
Thanks again.
Click to expand...
Click to collapse
I hardbricked my device about 10 times and i was able to recovery It even from a blank screen. Btw format data Will erase all your data but also the internal storage. About fastboot dont be afraid, go under twrp reboot section and reboot to bootloader. Then go under xda op6 guide section and search for mirrors for fastboot rom guide by Mauronofrio. He pushed my ass out the **** a lot of time.
P.s. Sorry but I dunno how to paste a link via xda app. Yes, ik! It's a vert newbie thing.
5xonlineage said:
Thank you for replying. I'm relieved that you know of a couple methods to try.
Is using "Format Data" in TWRP an option for dealing with the encryption??
For the MSN tool, can I use this one? Tried looking around, but it's unclear. "[TOOL] MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)" https://forum.xda-developers.com/on...wnloadtool-v4-0-international-t3798892/page10
I would be more comfortable with using fastboot, but am I at any risk of having lost fastboot, or can I just turn off my device from TWRP right now and hold down the buttons to get there? Afraid to move out of TWRP right now, in case I can't get back. I do have twrp-3.3.1-18-enchilada-Q-mauronofrio.img that I can run from fastboot if needed.
By "signed rom," do you mean I can simply flash one of the zips here from fastboot? "[OnePlus 6][ROM][OTA][Oxygen OS] Mirrors for official Oxygen OS ROMs and OTA updates" https://forum.xda-developers.com/oneplus-6/how-to/oneplus-6-mirrors-official-oxygen-os-t3792244
Thanks again.
Click to expand...
Click to collapse
Do you solve, man?
Fastboot ROM
°Washy said:
I hardbricked my device about 10 times and i was able to recovery It even from a blank screen. Btw format data Will erase all your data but also the internal storage. About fastboot dont be afraid, go under twrp reboot section and reboot to bootloader. Then go under xda op6 guide section and search for mirrors for fastboot rom guide by Mauronofrio. He pushed my ass out the **** a lot of time.
P.s. Sorry but I dunno how to paste a link via xda app. Yes, ik! It's a vert newbie thing.
Click to expand...
Click to collapse
That's awesome, I'm starting to grasp how much of a genius Mauronofrio is, after so many people referencing his work.
In his guide, he says, "These ROMs can't be used to update or downgrade your phone but just to restore your phone, so don't use them to come back to oreo or to update from oreo to pie." This may be a dumb question, but how do I know which zip/OOS version to flash, when I don't have a functioning OS on my phone?
5xonlineage said:
That's awesome, I'm starting to grasp how much of a genius Mauronofrio is, after so many people referencing his work.
In his guide, he says, "These ROMs can't be used to update or downgrade your phone but just to restore your phone, so don't use them to come back to oreo or to update from oreo to pie." This may be a dumb question, but how do I know which zip/OOS version to flash, when I don't have a functioning OS on my phone?
Click to expand...
Click to collapse
I talked with Mauronofrio in pm and he said me that you could solve your issue simply flash the ROM you want and format data after flash that one. Remember that your internal will be wiped but it would happen in any scenario we talked.
Magisk, boot img?
°Washy said:
I talked with Mauronofrio in pm and he said me that you could solve your issue simply flash the ROM you want and format data after flash that one. Remember that your internal will be wiped but it would happen in any scenario we talked.
Click to expand...
Click to collapse
That worked! And starstruck that you were able to check that with him. I flashed Mauronofrio's fastboot ROM for 10.3.2 and it rebooted (WOW). I clicked through the Google setup pages and checked that my data and wifi worked.
I then went back into fastboot, booted M's twrp img, fomatted data, and then installed twrp-3.3.1-x_blu_spark_v9.109_op6.zip, rebooted into recovery.
Then I think I made a mistake, because I installed Magisk-v20.4.zip. It succeeded, but now I can't boot into system anymore. Is it too late to flash the 10.3.2 boot.img?
5xonlineage said:
That worked! And starstruck that you were able to check that with him. I flashed Mauronofrio's fastboot ROM for 10.3.2 and it rebooted (WOW). I clicked through the Google setup pages and checked that my data and wifi worked.
I then went back into fastboot, booted M's twrp img, fomatted data, and then installed twrp-3.3.1-x_blu_spark_v9.109_op6.zip, rebooted into recovery.
Then I think I made a mistake, because I installed Magisk-v20.4.zip. It succeeded, but now I can't boot into system anymore. Is it too late to flash the 10.3.2 boot.img?
Click to expand...
Click to collapse
No. Just flash stock boot image if magisk broke something.
Rooted
°Washy said:
No. Just flash stock boot image if magisk broke something.
Click to expand...
Click to collapse
I ended up following the guide to Magisk Root without TWRP for OnePlus 6 Oxygen OS https://forum.xda-developers.com/oneplus-6/how-to/patched-boot-image-magisk-16-7-beta-t3818853 since it was referenced by Mauronofrio's post for having issues getting his TWRP to work with latest Magisk.
Someone posted a patched boot.img for 10.3.2, so now I'm rooted without TWRP. Priorities. Now all I need is for special characters and emojis to work Will keep an eye on other threads.
I'm learning a lot, thanks so much for all your help. You pointed me in the right direction when I was not sure what the hell to do!
5xonlineage said:
I ended up following the guide to Magisk Root without TWRP for OnePlus 6 Oxygen OS https://forum.xda-developers.com/oneplus-6/how-to/patched-boot-image-magisk-16-7-beta-t3818853 since it was referenced by Mauronofrio's post for having issues getting his TWRP to work with latest Magisk.
Someone posted a patched boot.img for 10.3.2, so now I'm rooted without TWRP. Priorities. Now all I need is for special characters and emojis to work Will keep an eye on other threads.
I'm learning a lot, thanks so much for all your help. You pointed me in the right direction when I was not sure what the hell to do!
Click to expand...
Click to collapse
I followed that thread for the first A10 release cause there wasn't a worked twrp yet. You are welcome man, when I feel myself usefull I always try to help.