hey guys i got the update this morning on my stock rooted k1 and tried to flash with flashfire, it went through fine and i kept twrp and root, but after a half an hour it rebooted and was stuck in a bootloop so i used my marshmallow backup i made with twrp to get my tablet back working.
has anyone else had this problem or how has everyone else got to nougat?
You are not alone. However, if you had AC Adapter plugged in, thats the main cause for boot loops.
I also wrote a little guide get rid of that. Maybe it helps you as well to get it to work.
https://forum.xda-developers.com/sh...ac-adapter-t3554261/post70972599#post70972599
Got exactly same problem...
Easiest and the fastest way to fix was for me flashing via fastboot blop GtrCraft provided and you are done.
No other actions needed.
GL
ren7o said:
Got exactly same problem...
Easiest and the fastest way to fix was for me flashing via fastboot blop GtrCraft provided and you are done.
No other actions needed.
GL
Click to expand...
Click to collapse
so all i have to do is use flashfire to update to nougat then boot to bootloader and flash the blob file with fastboot?
will i lose any data flashing the blob file?
Robgee789 exactly! No data loss! HF
ren7o said:
Robgee789 exactly! No data loss! HF
Click to expand...
Click to collapse
Thanks mate I'll have a go at this when I get back
No problem! Also thank you GtrCraft for blob!
Same issue here, same fix worked. (just step 4) Thanks all.
hey guys this worked for me the blob file has everything in check, so when (or if) the next update comes can you just use flashfire again or do we need a new blob file?
For explaining... Flashfire got some problems with flashing bootloader... so you have to flash blob manualy. I think new blob is needed only with new major Android update 6.0 > 7.0 etc... So it should be ok to just use Flashfire with small ROM updates. But I suggest flashing always new blob if new version is released... Hope Flashfire will fix that issue in the future! GL
Related
Just got a brand new TF700T today. I unlocked it and rooted it successfully. I am trying to instal TWRP so I can instal CM11 however I cannot make it happen the easy way. Goomanager is gone (what happened with that?) from the play store. Both Flashify and TWRP Manager can't find a recovery for the TF700T. What gives?
Firmware 10.6.1.14.4-20130329 if it matters. JB 4.2.1.
Id really like to avoid fastboot if I can.
edgex said:
Just got a brand new TF700T today. I unlocked it and rooted it successfully. I am trying to instal TWRP so I can instal CM11 however I cannot make it happen the easy way. Goomanager is gone (what happened with that?) from the play store. Both Flashify and TWRP Manager can't find a recovery for the TF700T. What gives?
Firmware 10.6.1.14.4-20130329 if it matters. JB 4.2.1.
Id really like to avoid fastboot if I can.
Click to expand...
Click to collapse
fastboot is the way to go...
really if you want to avoid fastboot, you should have left it locked ...
We can get you up and running, let me know
Thx Josh
lj50036 said:
fastboot is the way to go...
really if you want to avoid fastboot, you should have left it locked ...
We can get you up and running, let me know
Thx Josh
Click to expand...
Click to collapse
Alright well lets start with updating the firmware. That should leave root intact right? So whats the best way to do that?
edgex said:
Alright well lets start with updating the firmware. That should leave root intact right? So whats the best way to do that?
Click to expand...
Click to collapse
If you are still on stock the easiest way is to flash the latest Asus firmware.
Download your JB 4.2.2 SKU version from Asus support downloads site, unzip the downloaded file once resulting in another zip, and copy that second zip to the root of your internal SD.
The system should recognize the update file, pop up a notification about an update being available and flash it. If it doesn't, reboot.
You will loose root, but you don't need it to flash a custom rom following this:
http://forum.xda-developers.com/showthread.php?t=2688891
Thanks to lj50036 I was able to get CM11 on there successfully. Everything is running so much better than it was with the stock rom. I really appreciate it!
Hey guys, I'm trying to downgrade to KitKat after all the issues Lollipop is giving me and the incompatible apps I'm trying to run.
I am following instructions here but I came across a problem when flashing the system.img file.
The error it gives me is:
FAILED (remote: Insufficient memory.)
I can't flash over system and can not boot.
What am I missing? I was rooted and my bootloader unlocked prior to starting and I tried with the factory recovery and the 1.2.1 recovery image.
Edit: My issue has been solved. Flashing the Full OTA.zip file will install KitKat over Lollipop. No need to manually flash each file through fastboot. I wish guides would tell you that instead.
BlackDave said:
Hey guys, I'm trying to downgrade to KitKat after all the issues Lollipop is giving me and the incompatible apps I'm trying to run.
I am following instructions here but I came across a problem when flashing the system.img file.
The error it gives me is:
FAILED (remote: Insufficient memory.)
I can't flash over system and can not boot.
What am I missing? I was rooted and my bootloader unlocked prior to starting and I tried with the factory recovery and the 1.2.1 recovery image.
Click to expand...
Click to collapse
I don't know why that wouldn't work. Have you tried just downloading the image from nvidia HERE?
I'm assuming wifi since your sig says 16GB
Keithn said:
I don't know why that wouldn't work. Have you tried just downloading the image from nvidia HERE?
I'm assuming wifi since your sig says 16GB
Click to expand...
Click to collapse
Those are the same files as the ones I downloaded in the other thread.
I got my tablet working again on Lollipop 5.0.1 but that's not where I want to be. I've searched about my error message but most threads I found went unanswered.
Your best bet might just be to try getting a full OTA and flashing it through cwm or something. I'll try with mine when I have some time to backup and flash, probably later tomorrow. If I find anything out I'll post.
Sent from my SHIELD Tablet
BlackDave said:
I got my tablet working again on Lollipop 5.0.1 but that's not where I want to be. I've searched about my error message but most threads I found went unanswered.
Click to expand...
Click to collapse
I just flashed the images and booted.
Did you accidentally try flashing to the wrong place, such as flashing to boot( which would be too small) instead of system? Did you do all of the commands yourself or use the .bat? My shield disconnected after doing the boot.img and system.img for some reason, so I had to select fastboot protocol to reboot the bootloader and continue to flash the userdata.img, blob, and battery.dtb.
was your tablet internal memory full?, try wipping data and chace and you could use the script that the original Nvidia recovery image has zipped. I went up and down like 3 times, im in kitkat right now and not experiencing any problem.
Iams1002 said:
was your tablet internal memory full?, try wipping data and chace and you could use the script that the original Nvidia recovery image has zipped. I went up and down like 3 times, im in kitkat right now and not experiencing any problem.
Click to expand...
Click to collapse
No I wipped internal data since I keep everything on external and it still didn't work.
Keithn said:
I just flashed the images and booted.
Did you accidentally try flashing to the wrong place, such as flashing to boot( which would be too small) instead of system? Did you do all of the commands yourself or use the .bat? My shield disconnected after doing the boot.img and system.img for some reason, so I had to select fastboot protocol to reboot the bootloader and continue to flash the userdata.img, blob, and battery.dtb.
Click to expand...
Click to collapse
So I should just flash the ota.zip?
Also i did everything like the guide. I flashed boot to boot, recovery to recovery. The only thing that gave me an error was system. Userdata, blob, and battery also flashed successfully. After that didn't work, I also tried the .bat and that didn't work either. Flashing the 5.0.1 update got my tablet running again.
BlackDave said:
No I wipped internal data since I keep everything on external and it still didn't work.
So I should just flash the ota.zip?
Also i did everything like the guide. I flashed boot to boot, recovery to recovery. The only thing that gave me an error was system. Userdata, blob, and battery also flashed successfully. After that didn't work, I also tried the .bat and that didn't work either. Flashing the 5.0.1 update got my tablet running again.
Click to expand...
Click to collapse
If you can find a full ota.zip for update 1.2.1 I'd try that. I'm not sure why you would be having this issue. The only other things I can say to try is redownloading and rebooting the boot loader (select fastboot protocol) between images in case something funny is happening there. Let us know how you end up doing.
Sent from my HTC M8
Keithn said:
If you can find a full ota.zip for update 1.2.1 I'd try that. I'm not sure why you would be having this issue. The only other things I can say to try is redownloading and rebooting the boot loader (select fastboot protocol) between images in case something funny is happening there. Let us know how you end up doing.
Sent from my HTC M8
Click to expand...
Click to collapse
I flashed the 1.2.1 OTA update and it worked. The first time I tried, I did using the TWRP recovery but for some reason, that recovery fails to flash OTAs, so I went with CWM and flashed the 2.1 update and all worked again. After a while, I got tired of all the issues lollipop gave me so that's why I tried following that guide to downgrade.
In the end, using CWM and flashing the OTA is the best way to go. Thank you all for you help.
Hi folks, so, I received OTA update for my Moto G (XT1032).
Phone was rooted (I did unroot from SuperSU). Also, I've re-installed Stock recovery (to make sure) and wiped cache/dalvik.
But, update still fails.
I don't have much root-related soft (like Xposed etc) installed - so pretty sure this should not cause an issue.
But still, update fails.
Any ideas how to troubleshoot/make it work? Maybe installing OTA somehow from recovery (custom one, TWRP)?
Any comments - much appreciated. I guess I'm not alone in this, but still...
Thanks
Same problem here
Ulverinho said:
Hi folks, so, I received OTA update for my Moto G (XT1032).
Phone was rooted (I did unroot from SuperSU). Also, I've re-installed Stock recovery (to make sure) and wiped cache/dalvik.
But, update still fails.
I don't have much root-related soft (like Xposed etc) installed - so pretty sure this should not cause an issue.
But still, update fails.
Any ideas how to troubleshoot/make it work? Maybe installing OTA somehow from recovery (custom one, TWRP)?
Any comments - much appreciated. I guess I'm not alone in this, but still...
Thanks
Click to expand...
Click to collapse
Have to install stock ROM again then update it via ota. Could also try flashing an ota update file via the official recovery of your phone.
A_Bunny said:
Have to install stock ROM again then update it via ota. Could also try flashing an ota update file via the official recovery of your phone.
Click to expand...
Click to collapse
Yep, my guess was the same. As per official recovery - I'll try adb sideload, but first time it couldn't find phone (all drivers installed and up-to-date).
http://forum.xda-developers.com/moto-g/help/driver-fastboot-falcon-s-t2820848
This error pops up - I can't find solution also...
Ulverinho said:
Yep, my guess was the same. As per official recovery - I'll try adb sideload, but first time it couldn't find phone (all drivers installed and up-to-date).
http://forum.xda-developers.com/moto-g/help/driver-fastboot-falcon-s-t2820848
This error pops up - I can't find solution also...
Click to expand...
Click to collapse
Install the recovery with fastboot not adb.
A_Bunny said:
Install the recovery with fastboot not adb.
Click to expand...
Click to collapse
Well, I might misunderstood, but:
I have official recovery (fastboot is mode of it, I guess, when U press Power+volume key?)
I've read about adb sideload zip_name_of_OTA.zip
I don't know any other way to install OTA apart from let phone handle it OR adb sideload.
Ulverinho said:
Well, I might misunderstood, but:
I have official recovery (fastboot is mode of it, I guess, when U press Power+volume key?)
I've read about adb sideload zip_name_of_OTA.zip
I don't know any other way to install OTA apart from let phone handle it OR adb sideload.
Click to expand...
Click to collapse
Just load it onto your phone before you flash it. Your ROM does work.
A_Bunny said:
Just load it onto your phone before you flash it. Your ROM does work.
Click to expand...
Click to collapse
Load ZIP of OTA on SD Card and install it from Recovery? Will it work?
Ulverinho said:
Load ZIP of OTA on SD Card and install it from Recovery? Will it work?
Click to expand...
Click to collapse
It may work if it is the stock recovery.
A_Bunny said:
It may work if it is the stock recovery.
Click to expand...
Click to collapse
Got this, screenshot in attachment.
Fingerprints are wrong. In build.prop - I can see it's fine, fingerprint of current 4.4.4. - matches expected.
But as soon as update starts - it says that 4.4.2 is fingerprint of my OS. Bollocks.
Edited OTA zip, edited some metadata file...
Why it won't install on pretty clean phone - I can't understand...Previous installs of OTA went fine with root etc.
Ulverinho said:
Got this, screenshot in attachment.
Fingerprints are wrong. In build.prop - I can see it's fine, fingerprint of current 4.4.4. - matches expected.
But as soon as update starts - it says that 4.4.2 is fingerprint of my OS. Bollocks.
Edited OTA zip, edited some metadata file...
Why it won't install on pretty clean phone - I can't understand...Previous installs of OTA went fine with root etc.
Click to expand...
Click to collapse
Well the only thing I would recommend would be to install the stock system though fastboot manualy.
Ulverinho said:
Hi folks, so, I received OTA update for my Moto G (XT1032).
Phone was rooted (I did unroot from SuperSU). Also, I've re-installed Stock recovery (to make sure) and wiped cache/dalvik.
But, update still fails.
I don't have much root-related soft (like Xposed etc) installed - so pretty sure this should not cause an issue.
But still, update fails.
Any ideas how to troubleshoot/make it work? Maybe installing OTA somehow from recovery (custom one, TWRP)?
Any comments - much appreciated. I guess I'm not alone in this, but still...
Thanks
Click to expand...
Click to collapse
i feel ya same thing here, than i tryed installing a stock lollipop from here via twrp witch ended up messing my phone with failing the procedure wondered around couldnt revert to stock since im a noob and didnt even backed up the rom,but at the and of the day thank god for the cm12.1 finally menaged to make my phone running again at least
Greetings, I have the same problem, it is the last screen that appears when you install the update, and then restarts it goes off the screen update error ...
To anyone having issues:
1. Make sure you're on completely stock 4.4.4 (Refer to http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-rom-collection-t2854688 and use only untouched 4.4.4 version for your phone if you have to reflash before continuing)
2. Make sure you're on stock recovery (Refer to http://forum.xda-developers.com/showthread.php?t=2649763)
*Uninstall XPOSED if using it
3. I personally let update run on its own after reverting everything to stock.
fusionice said:
To anyone having issues:
1. Make sure you're on completely stock 4.4.4 (Refer to http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-rom-collection-t2854688 and use only untouched 4.4.4 version for your phone if you have to reflash before continuing)
2. Make sure you're on stock recovery (Refer to http://forum.xda-developers.com/showthread.php?t=2649763)
*Uninstall XPOSED if using it
3. I personally let update run on its own after reverting everything to stock.
Click to expand...
Click to collapse
Yeah, that's the better way.
But I guess, I can install Stock 5.* straight away after wiping? Why bother about OTA, if there is ROM available?
fusionice said:
To anyone having issues:
1. Make sure you're on completely stock 4.4.4 (Refer to http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-rom-collection-t2854688 and use only untouched 4.4.4 version for your phone if you have to reflash before continuing)
2. Make sure you're on stock recovery (Refer to http://forum.xda-developers.com/showthread.php?t=2649763)
*Uninstall XPOSED if using it
3. I personally let update run on its own after reverting everything to stock.
Click to expand...
Click to collapse
Yep.
The solution is backup data, restore stock last firmware using fastboot guide posted in this forum and not even update apps (cancel gmail registration and everything it asks when it first starts) ONLY update motorola update services so you can get the ota again an install it. If you have the ota downloaded you can flash it through recovery but using the last recovery version (.61) and of course last firmware version. If you guys flash it all through fastboot, it should install w/o any problems.
Hi
Since updating my OPO to YOG4PAS1N0 I couldn't reboot my OPO. Since the last update it won't even boot any more. I've reflashed to stock 4.4.4, installed every update and had the same issue. I even tried to flash the zip true recovery, but i got an error while doing it. So, after three times of updating, I'm back to square one.
After going back to stock I have to factory reset in recovery, otherwise the OPO won't boot.
But of course I'd like to install Lollipop (and later Marshmallow). What can I do? I have a Mac with OSX 10.11 and a laptop with Windows 7, so I'm able to use both.
I did the flashing on my Macbook with the Toolkit found here. But I don't think there's an issue with this, as it uses the terminal. It's just easier then to type it all myself
Thanks in advance.
erdeebee said:
Hi
Since updating my OPO to YOG4PAS1N0 I couldn't reboot my OPO. Since the last update it won't even boot any more. I've reflashed to stock 4.4.4, installed every update and had the same issue. I even tried to flash the zip true recovery, but i got an error while doing it. So, after three times of updating, I'm back to square one.
After going back to stock I have to factory reset in recovery, otherwise the OPO won't boot.
But of course I'd like to install Lollipop (and later Marshmallow). What can I do? I have a Mac with OSX 10.11 and a laptop with Windows 7, so I'm able to use both.
I did the flashing on my Macbook with the Toolkit found here. But I don't think there's an issue with this, as it uses the terminal. It's just easier then to type it all myself
Thanks in advance.
Click to expand...
Click to collapse
It'd help if you actually posted what errors you're getting, without information like that it's virtually impossible to troubleshoot. Anyway, your best bet is probably just to flash the stock images with fastboot. Back up anything important first as this will wipe your device. See section 8 of my guide:
http://forum.xda-developers.com/oneplus-one/general/guides-bacon-timmaaas-how-to-guides-t2839471
The only error I got, was that it's impossible to boot. I'll try your guide asap
Heisenberg said:
It'd help if you actually posted what errors you're getting, without information like that it's virtually impossible to troubleshoot. Anyway, your best bet is probably just to flash the stock images with fastboot. Back up anything important first as this will wipe your device. See section 8 of my guide:
http://forum.xda-developers.com/oneplus-one/general/guides-bacon-timmaaas-how-to-guides-t2839471
Click to expand...
Click to collapse
I unlocked the bootloader.
I installed the latest fastboot image.
Now my OPO is stuck again at the 1+ / Powered by Android-screen. I can't boot into recovery, but fastboot mode is still possible.
Everything up to cm-12.0-YNG1TAS2XK-bacon-signed-fastboot seems to work fine.
erdeebee said:
I unlocked the bootloader.
I installed the latest fastboot image.
Now my OPO is stuck again at the 1+ / Powered by Android-screen. I can't boot into recovery, but fastboot mode is still possible.
Click to expand...
Click to collapse
erdeebee said:
Everything up to cm-12.0-YNG1TAS2XK-bacon-signed-fastboot seems to work fine.
Click to expand...
Click to collapse
Is there a reason you're using that particular build instead of the latest? How are you installing it?
Heisenberg said:
Is there a reason you're using that particular build instead of the latest? How are you installing it?
Click to expand...
Click to collapse
I'm sorry, I thought my message was clear. The latest build gives the same problem. With this build, I'm able to boot. I installed this in terminal as a fastboot-images.
This guy has the exact same problem.
erdeebee said:
This guy has the exact same problem.
Click to expand...
Click to collapse
Assuming that you want to upgrade your OPO to latest available version of Cyanogen
- Flash latest *fastboot* image from here http://forum.xda-developers.com/oneplus-one/general/official-cm11s-roms-ota-updates-t2906746
- If you have already tried above step, flash cm-12.0-YNG1TAS2I3-bacon-signed-fastboot.zip and then upgrade via OTA incremental update zip
Mr hOaX said:
Assuming that you want to upgrade your OPO to latest available version of Cyanogen
- Flash latest *fastboot* image from here http://forum.xda-developers.com/oneplus-one/general/official-cm11s-roms-ota-updates-t2906746
- If you have already tried above step, flash cm-12.0-YNG1TAS2I3-bacon-signed-fastboot.zip and then upgrade via OTA incremental update zip
Click to expand...
Click to collapse
I've tried the first, didn't work. I've tried flashing 11S and started upgrading. I didn't have issues until 12.0. When I got to 12.1 I couldn't reboot (but I could shut down and boot). With the latest update I couldn't even boot normally.
Anyone has some idea?
Verstuurd vanaf mijn A0001 met Tapatalk
erdeebee said:
Anyone has some idea?
Verstuurd vanaf mijn A0001 met Tapatalk
Click to expand...
Click to collapse
Not sure if its a language barrier but first of you are going to have to supply more information than that. Secondly what have you tried to fix it and especially since there are tutorial out the waaaaahzooo in here on how to repair your "bricked" phone.
Please research make some attempts and if any issue please document in full what your issue is. I guarantee you though whatever it is someone here has gone through it already so search thorough
playya said:
Not sure if its a language barrier but first of you are going to have to supply more information than that. Secondly what have you tried to fix it and especially since there are tutorial out the waaaaahzooo in here on how to repair your "bricked" phone.
Please research make some attempts and if any issue please document in full what your issue is. I guarantee you though whatever it is someone here has gone through it already so search thorough
Click to expand...
Click to collapse
What I have tried is on page 1 of this thread.
I tried to install 4.4.4 with a flashable zip and then installed all updates. I installed the 5.1.1 zip. I installed the fastboot 5.1.1 and 4.4.4 and installed all updates.
Now I'm on 5.0.
On the last update I couldn't update reboot or boot anymore. The update before that I couldn't reboot, bu I could boot.
erdeebee said:
What I have tried is on page 1 of this thread.
I tried to install 4.4.4 with a flashable zip and then installed all updates. I installed the 5.1.1 zip. I installed the fastboot 5.1.1 and 4.4.4 and installed all updates.
Now I'm on 5.0.
On the last update I couldn't update reboot or boot anymore. The update before that I couldn't reboot, bu I could boot.
Click to expand...
Click to collapse
My bad on that did not even realize there was another page.. dont know how that happened... Wow I say just start from scratch and go to cm page and download the latest stock software. I am sorry I see others have tried to help you and to be honest your breakdown is a lil confusing. NO worries though hopefully someone will come along to help
Hello Everyone
Thanks in advance for reading this. I'm having another issue here which has me stumped.
As mentioned in my other thread, I'm having issues with the wifi hotspot on this B180 ROM
http://forum.xda-developers.com/mate-8/development/rom-stock-b162-rooted-t3336931
So I tried to flash other roms available in the forum through TWRP (Wipe then Install) however whenever I try to flash any other ROM; TWRP just boots me back into the main menu.
So Now i'm flashed back into the above ROM and the WIFI issue still persists.
Am I doing something wrong here to make TWRP not flash any other ROM other than the one mentioned above?
Thank you again for all the help
Eddie
If you're trying to flash B320 over your B180 with TWRP that won't work properly.
Grab the correct firmware package for your device here and flash the stock recovery for your device (you can put TWRP back later)
Store the update.app file in sdcard/dload/update.app
Dial *#*#2846579#*#* and choose option 4 for software upgrade
Once successfully updated to B320 you can then install the latest version of TWRP 3.0.2 for EMUI4.1 and reap the benefits
Thank you @MuPp3t33r
@MuPp3t33r I just tried doing that and all it does is boot me into TWRP. Am I missing something? Thanks
kwanjie said:
@MuPp3t33r I just tried doing that and all it does is boot me into TWRP. Am I missing something? Thanks
Click to expand...
Click to collapse
At which point does it send you back to TWRP? Was it when you dialled the number to upgrade? If so that means you haven't flashed the stock recovery yet. You will need to use fastboot to flash recovery.img from the stock rom in the same way you originally flashed TWRP.
The recovery.img can be extracted using Huawei Update Extractor if you don't have it, otherwise let me know and I can upload a copy for you...
@MuPp3t33r I figured it out, I used SRK tool to flash OEM Recovery then flashed to 180 then to 320. I then went back and flashed TWRP 3.0.2 and then wiped and tried to install the following ROM:
http://forum.xda-developers.com/mate-8/development/rom-simply-google-t3311395
TWRP keeps saying "Zip FIle is Corrupt!"
Update: got it fixed. figured out it was a corrupted SD Card! Thanks everyone
kwanjie said:
Update: got it fixed. figured out it was a corrupted SD Card! Thanks everyone
Click to expand...
Click to collapse
Glad to hear you got it working, out of interest sake did it fix your WiFi issue you had on 180?
MuPp3t33r said:
Glad to hear you got it working, out of interest sake did it fix your WiFi issue you had on 180?
Click to expand...
Click to collapse
Nope! WiFi issue persists with every rom I've tried! I'm about to flush it down the toilet haha