My O2 sensor is not working in s health. when i first got the phone, it worked great but after anupdat a while ago, it stopped working. the heart rate works and also the stress reading works. i even tried it with other people just in case it just didnt like me for some reason. no go.
anyone else having issues? there was an S health update today and i just tested again. still no go..
your phone is rooted?
not rooted. it just stopped working seemingly after a previous update. it didnt work for about 3 weeks. a couple days ago there was another s health update and now it works again.
so who knows. its working again. hopefully it stays that way
deleted
I rooted my phone and got Samsung health working again but my O2 sensor isn't showing up to use the built in. I only have the option to manually enter it. I'm not good at searching these areas to find out what the fix is and it's amazing that i was able to root this and use Xposed modules to get my wifi tethering to work. Any point to the right direction or a link to the fix would be greatly appreciated.
hi
Ihave a not rooted s6. I can't enable spo2 and stress optin in s health.What can you advice to me ? I cantry flash fresh sw but wich country you advice ? I'm from Croatia, but i can flash some europen software...
Yes, all health sensor measurements were working up until today, trying to find a fix. I have an unrooted S7 edge
Related
Hi,
The GPS on my Oneplus One appears to be very close to broken after the OTA update to 5.1. My phone is completely stock - ie not rooted, locked bootloader, the whole lot. Everything else on the device works beautifully.
I've searched around and it doesn't appear to be a very common problem with this phone.
The GPS worked flawlessly on 4.4 and I think on 5.0 (was only on 5.0 for a couple of days before the 5.1 OTA came through).
Using GPS test I can see 32 satellites, but it will very, very slowly fix to 7 or 8 and sometimes get a lock, mostly not.
Is this something anyone else is finding, or has a fix for?
I'm not against rooting and flashing another ROM, it just seems a little overkill when everything else works so well.
Thanks in advance for any help...
Did you tried GPS Fix from Playstore?
Sent from my A0001 using XDA Free mobile app
^^^ Yes, often resetting and downloading new AGPS data can fix this. I use GPS Status & Toolbox.
Thanks guys. "The GPS Fix" app sorted it out. I'm not sure what it actually does behind the scenes but I'm getting a solid lock instantly now.
Is this something I'm going to need to do periodically, or after a reboot to keep it working?
Cheers...
wendleburger said:
Is this something I'm going to need to do periodically, or after a reboot to keep it working?
Click to expand...
Click to collapse
I travel a lot internationally and only have to do it when I go to another region. Once I'm in a region for a while, I just leave it alone.
This is what I used http://ejvyas.blogspot.com/2015/10/one-plus-one-bacon-gps-fix.html
Did it work well long term?
I thought I'd fixed this with the apps mentioned earlier, but it's still pretty poor. 30 seconds plus to fix and then drops out constantly...
Same issue here.. It started after the last update..I travel for business and I use the phone to plan my route.. Last trip had great weather yet horrible drop off. Hasn't gotten any better since..
My girlfriend has the S7 Edge (German model) now since it came out. She had Galaxy devices before, but since then she never really cared for S-Health. Now with the S7 she kinda does, and in the beginning the steps counter in S-Health worked fine. Now out of a sudden, it stopped counting. The device is still vanilla, no root, no mod or anything. It recently got the latest Update from Samsung that is available here. But even after that, the Steps counter still worked fine. Now it stopped most of the time, and if it works, it only says like it has done 30 steps (after it should be at least 2000 or so). On google i found a hint to uninstall all Updates for S-Health and reinstall them and start over with S-Health. Did that, no effect really.
Does anyone know what the issue is ? Is it a software issue, is a sensor in the device broken or faulty or what could it be ? Because for her, that Steps counter is important, and she really would like to continue with that. Maybe one of you also had this issue and even fixed it and maybe knows what to do. I would appreciate any help.
Thanks in advance.
Wolfseye
wpkwolfseye said:
My girlfriend has the S7 Edge (German model) now since it came out. She had Galaxy devices before, but since then she never really cared for S-Health. Now with the S7 she kinda does, and in the beginning the steps counter in S-Health worked fine. Now out of a sudden, it stopped counting. The device is still vanilla, no root, no mod or anything. It recently got the latest Update from Samsung that is available here. But even after that, the Steps counter still worked fine. Now it stopped most of the time, and if it works, it only says like it has done 30 steps (after it should be at least 2000 or so). On google i found a hint to uninstall all Updates for S-Health and reinstall them and start over with S-Health. Did that, no effect really.
Does anyone know what the issue is ? Is it a software issue, is a sensor in the device broken or faulty or what could it be ? Because for her, that Steps counter is important, and she really would like to continue with that. Maybe one of you also had this issue and even fixed it and maybe knows what to do. I would appreciate any help.
Thanks in advance.
Wolfseye
Click to expand...
Click to collapse
It happens to me once, I removed the widget and put a new widget again and it started counting
She doesn't even use the Widget on one of the Screens. She just goes into the app itself to check. So she doesn't even have the widget in use.
Sent from a smartphone...
The same thing has just happened to me and my phone is only 4 months old. I tried uninstalling updates, and I do not have a widget. I am about to return it to Best Buy if I do not find a solution soon.
Hello,
3 days ago I dropped my phone, it survived thanks to the official rubbery case, it just rebooted by itself and nothing more, not event a scratch.
Yesterday, I've noticed Google Maps having a hard time to locate me, I tried several things, reboot, another gps app, even the app GPS Test but I can't get a single GPS signal, I think my gps may have died from the drop but I'm still unsure.
I'd like to test it through the hardware test you can usually access with the emui secret code but I can't find a working one on EMUI 5, is there any secret code for hardware test in EMUI 5 ? What can I try ?
Thanks
dead GPS
Similar problem but without dropping the phone...
After about two months of owning the phone I just realized that the GPS doesn´t work at all.
It went unnoticed because I always use wifi+mobile data option that is sufficient to locate me in Google maps. Only when I needed real navigation I realized there is a problem.
It certainly is not caused by mechanical damage because the phone is masked from the day 1 and had never been dropped.
I did a factory reset with no success (i am on emui5, b360). Applications for testing GPS signal can not locate any satellite, let alone get a fix on. It looks as if the GPS is completely dead.
Has anyone had a similar problem?
Or some advice what to do before I take it to service center...
Hi, i bought a FRD-L04 in USA in january, ive the same issue. The first month it was working just fine, then i didnt use the gps for days and the OTA comes. And now i realice that the gps isnt working the way u are saying. the phone has not a single drop, not a single scratch, so i think its a software problem.... i was thinking in a downgrade to marshmallow to see if the problem is in the ota
Consejo said:
Hi, i bought a FRD-L04 in USA in january, ive the same issue. The first month it was working just fine, then i didnt use the gps for days and the OTA comes. And now i realice that the gps isnt working the way u are saying. the phone has not a single drop, not a single scratch, so i think its a software problem.... i was thinking in a downgrade to marshmallow to see if the problem is in the ota
Click to expand...
Click to collapse
Mine is FRD-L09.
I cant really tell whether the problem appeared with upgrading to EMUI5 because I upgraded the same day I bought it (and never used GPS-only location service anyway).
If you try downgrading to MM and it solves the problem, please report back.
Just to let you know, after a factory reset the GPS was still dead.
I have sent it to the service center, I don't know what they did to the phone but the GPS is working again.
dvadvadva said:
Mine is FRD-L09.
I cant really tell whether the problem appeared with upgrading to EMUI5 because I upgraded the same day I bought it (and never used GPS-only location service anyway).
If you try downgrading to MM and it solves the problem, please report back.
Click to expand...
Click to collapse
in a few hours ill be coming back from work nd will try downgranding to mm. i will be back with news
Ezekiel3 said:
Just to let you know, after a factory reset the GPS was still dead.
I have sent it to the service center, I don't know what they did to the phone but the GPS is working again.
Click to expand...
Click to collapse
the service cnter was official one ? if not, and u bring the phone to a common guy with a store; why not can we solve it?
Hey! got news. i just downgrade to 6.0 MM and check the GPS and... its perfectly working i hope it help someone else. I will be here if ssomeone ask for help!
Consejo said:
the service cnter was official one ? if not, and u bring the phone to a common guy with a store; why not can we solve it?
Click to expand...
Click to collapse
It was the official service center for Huawei/Honor phones in France, seems different in each countries
Consejo said:
Hey! got news. i just downgrade to 6.0 MM and check the GPS and... its perfectly working i hope it help someone else. I will be here if ssomeone ask for help!
Click to expand...
Click to collapse
It worked for me too!
Do you plan to go back to EMUI 5? If you do, please report back the GPS status.
I´ll stay on MM for a few days, only to test the battery (since I upgraded to N the day I bought it).
Hi. Where can I find the Rom to downgrade to 6.0 MM?
I have a S8+ on Verizon, and after rooting I am having some weird problems in Gear VR. When you first put boot up Gear VR it works excellent, maybe even better than before root. But if you take the headset off so that the screen shuts off and leave if off for about 10-15 seconds (but not removing the phone from the headset) two things happen. When you put it back on, it is clear when you are still, but there is severe motion blur when you turn your head. Secondly, the screen brightness stays at max no matter where you put the slider in setting. If you take the phone out of the headset, and then put in back in again, everything is normal until you take it off and try to put it back on.
I was trying to troubleshoot it but I can't quite figure out what is happening. It has the motion blur even with one eye shut. It doesn't show up on the recording as far as I can tell. I didn't use gear vr for a few weeks prior to rooting so I am not sure if this is a global Gear VR problem from one of their updates, or if this is coming from the SamPWND root. Has anyone experienced this?
I did also try uninstalling and reinstalling Gear VR and Oculus if anyone was wondering.
Is there anyone that has a SamPWND rooted phone who uses Gear VR that can comment on this? I am wondering if I should start from scratch and re-root, but am not sure if it will help.
Dirtdawg57 said:
Is there anyone that has a SamPWND rooted phone who uses Gear VR that can comment on this? I am wondering if I should start from scratch and re-root, but am not sure if it will help.
Click to expand...
Click to collapse
Did you ever get this sorted out?
I'm in a similar boat, but I can't seem to get it to work at all.
biTToe said:
Did you ever get this sorted out?
I'm in a similar boat, but I can't seem to get it to work at all.
Click to expand...
Click to collapse
No, I never got an answer. If you are using Samfail, the newest root method, it might not be working because it is debloated. You would have to download the needed gear vr apk files from another site, because it won't happen automatically when you plug it in to the VR goggles. I am not sure if that root method cleared up the motion blur I had or not. I gave up on Samfail too because I couldn't get the DEX Dock to work, and couldn't get an answer for it on here.
Dirtdawg57 said:
No, I never got an answer. If you are using Samfail, the newest root method, it might not be working because it is debloated. You would have to download the needed gear vr apk files from another site, because it won't happen automatically when you plug it in to the VR goggles. I am not sure if that root method cleared up the motion blur I had or not. I gave up on Samfail too because I couldn't get the DEX Dock to work, and couldn't get an answer for it on here.
Click to expand...
Click to collapse
I am using the latest SamFail. I finally got my VR headset to work like half an hour ago.
I think the biggest issue ended up being that I needed facebook installed (which was debloated from SamFail).
I found the setup wizard here https://gear-vr-setupwizard.en.aptoide.com/ It took a little doing (I think b/c of FB not installed) but it finally works now.
So you went back to stock?
biTToe said:
Did you ever get this sorted out?
I'm in a similar boat, but I can't seem to get it to work at all.
Click to expand...
Click to collapse
biTToe said:
I am using the latest SamFail. I finally got my VR headset to work like half an hour ago.
I think the biggest issue ended up being that I needed facebook installed (which was debloated from SamFail).
I found the setup wizard here https://gear-vr-setupwizard.en.aptoide.com/ It took a little doing (I think b/c of FB not installed) but it finally works now.
So you went back to stock?
Click to expand...
Click to collapse
Yeah I am stock for the time being because I use my DEX quite a bit and couldn't figure out how to get it working again. I was also getting the Kernel Panic a lot for some reason. I miss root because of things I do with Tasker. Maybe in the future I will return.
Recently my gear fit2 pro quit counting steps, floors, and heat rate. Also the wake up gesture quit working. Judging by the amount of people having similar issues, it must be a real thing. I received a OTA update about a week ago and it seemed to be working fine. The only thing that I can think of that I did was connect the band to my home wifi. I searched high and low to find the software to roll it back. After accidentally loading the software for the SM-R360 which is no the pro, I had to pay to get the software for the SM-R365.
I thought I might load it up here in the hopes it might help someone else out and save you some $$.
My issues were solved and it is back to 100% after flashing the software. It is now running R365XXU2aQI1.
Flash it with Wifi_Odin.
Not sure what partition.pit is but it came with it.
https://drive.google.com/open?id=1c6z4jwzhioaqLRkKFA1KMDlbP6bYxwSN
tmokeith said:
Recently my gear fit2 pro quit counting steps, floors, and heat rate. Also the wake up gesture quit working. Judging by the amount of people having similar issues, it must be a real thing. I received a OTA update about a week ago and it seemed to be working fine. The only thing that I can think of that I did was connect the band to my home wifi. I searched high and low to find the software to roll it back. After accidentally loading the software for the SM-R360 which is no the pro, I had to pay to get the software for the SM-R365.
I thought I might load it up here in the hopes it might help someone else out and save you some $$.
My issues were solved and it is back to 100% after flashing the software. It is now running R365XXU2aQI1.
Flash it with Wifi_Odin.
Not sure what partition.pit is but it came with it.
https://drive.google.com/open?id=1c6z4jwzhioaqLRkKFA1KMDlbP6bYxwSN
Click to expand...
Click to collapse
When i flash this firmware i don't get any update OTA
Installing the firmware worked for me, the sensors are working now..
tmokeith said:
Recently my gear fit2 pro quit counting steps, floors, and heat rate. Also the wake up gesture quit working. Judging by the amount of people having similar issues, it must be a real thing. I received a OTA update about a week ago and it seemed to be working fine. The only thing that I can think of that I did was connect the band to my home wifi. I searched high and low to find the software to roll it back. After accidentally loading the software for the SM-R360 which is no the pro, I had to pay to get the software for the SM-R365.
I thought I might load it up here in the hopes it might help someone else out and save you some $$.
My issues were solved and it is back to 100% after flashing the software. It is now running R365XXU2aQI1.
Flash it with Wifi_Odin.
Not sure what partition.pit is but it came with it.
https://drive.google.com/open?id=1c6z4jwzhioaqLRkKFA1KMDlbP6bYxwSN
Click to expand...
Click to collapse
i am facing the same problem please provide me new link.
---------- Post added at 07:54 AM ---------- Previous post was at 07:25 AM ----------
Hrbie17 said:
Installing the firmware worked for me, the sensors are working now..
Click to expand...
Click to collapse
please provide me download link
Anyone has a link to the file?
I can't find it and the ones I found once you open the file inside there's another version not the version R365XXU2aQI1
Link not working.
tmokeith said:
Recently my gear fit2 pro quit counting steps, floors, and heat rate. Also the wake up gesture quit working. Judging by the amount of people having similar issues, it must be a real thing. I received a OTA update about a week ago and it seemed to be working fine. The only thing that I can think of that I did was connect the band to my home wifi. I searched high and low to find the software to roll it back. After accidentally loading the software for the SM-R360 which is no the pro, I had to pay to get the software for the SM-R365.
I thought I might load it up here in the hopes it might help someone else out and save you some $$.
My issues were solved and it is back to 100% after flashing the software. It is now running R365XXU2aQI1.
Flash it with Wifi_Odin.
Not sure what partition.pit is but it came with it.
https://drive.google.com/open?id=1c6z4jwzhioaqLRkKFA1KMDlbP6bYxwSN
Click to expand...
Click to collapse
Link not working.