Hi ,
So I got a pendopad 7 from dodo car insurance promotion and while I was trying to remove kingroot and replace with supersu , I think something went wrong and now tablet is in a weird state. It boots up to show nothing but if press and hold power button I can see option to turn off the tablet. I am assuming its something to do with systemui.apk , I was wondering if there is a way to fix it without rom install as I dont have any backup or the image to restore this tablet.
Its A-33 Quadcore Pendopad 7 PNDP51M7BLK
Ram 1 gb
Android 5.1.1
1024 x 600 px
http://www.pendo.com.au/pendopad-7-quad-core-black-pndp51m7blk/
If anyone has this tablet or rom or any method to bring it back to life. Any help is appreciated.
I can acces the normal recovery on the tablet and have tried resetting it but doesnt help .
Thanks
Thread closed
Senior members are expected to know where to post. The Assist section is where we help new users find their way around XDA.
Related
Hello. After factory reset my goclever does not stand up. It freezes at android logo and nothing happens later (no reset, just android logo). I think it might be because after installing apex pro i deleted stock launcher. Device manager sees it as ' Full AOSP on Rk29sdk ' (but cannot copy anything to device) and ADB sees no device.
Is there any way to do something ? Christmas are soon, so i will not send it to service cenrte.
haseo9119 said:
Hello. After factory reset my goclever does not stand up. It freezes at android logo and nothing happens later (no reset, just android logo). I think it might be because after installing apex pro i deleted stock launcher. Device manager sees it as ' Full AOSP on Rk29sdk ' (but cannot copy anything to device) and ADB sees no device.
Is there any way to do something ? Christmas are soon, so i will not send it to service cenrte.
Click to expand...
Click to collapse
You can't access recovery or download mode too ?
karimkahale said:
You can't access recovery or download mode too ?
Click to expand...
Click to collapse
Goclever hasn't published any R75 firmware yet. Also this tablet doesn't have any physical buttons except power switch. On my native language forum was sometime ago rumor that on downside motherboard is switch which combination with power button gives recovery menu. Personally i tried various combinations but didn't worked for me.
Any ideas ?
haseo9119 said:
Any ideas ?
Click to expand...
Click to collapse
Hello.
Which version of the device do you have?
7500
or R75
Those seems to be the same but are different.
I have stock android version for both
for 7500 - original, unrooted ( from a Russian site - don't remember)
for R75 - original, rooted ( a dump created by me from my device when I have received it)
Both works, were tested by me on my R75.
The firmware of 7500 flashed on R75 works, but you won't be able to use the capacitive buttons (as I told you are different).
The flash option is very simple:
1. Copy two files on the root of the sd card
2. Insert the card in the card slot of the device.
3. The flashing process will continue automatically.
Just tell me which one you need and a place where to upload the needed firmware. I can do the upload this weekend.
Regarding ADB, hmm... this is strange. I have done the same thing as you (deleted the launcher and restore to default) but adb was working with device in the android logo state.
I'm using Windows 8 and I have installed the device as test ADB device (from windows drivers).
Bye.
Edit:
This is the link for R75 rooted firmware.
http://www.sendspace.com/file/0fhask
I hope it helps you.
Bye.
Edit:
This is the link for GoClever tab 7500
http://www.sendspace.com/file/shrso4
Bye.
On the back he have written that he's tab 7500. Soon i will try to flash him with your 7500 image. Hope it will work ^^ Thank you very much.
Everything on first look is working on. Except wifi card, which doesn't turning on.
/update
R75 software fixed it. Don't trust manufacturer anymore.
haseo9119 said:
Everything on first look is working on. Except wifi card, which doesn't turning on.
/update
R75 software fixed it. Don't trust manufacturer anymore.
Click to expand...
Click to collapse
its not working with me. i have kingston microsd card 8gb and i put 7500 image on root of the card.then, i started the tablet but nothing happens. it still show ANDROID logo and wont flash,please help!!!
goclever
severijan said:
its not working with me. i have kingston microsd card 8gb and i put 7500 image on root of the card.then, i started the tablet but nothing happens. it still show ANDROID logo and wont flash,please help!!!
Click to expand...
Click to collapse
hello
this may help some one later
to get into recovery if your R75 table wont boot you have to take it apart the button is on the underside of the board behind the screen (silly place to put it) i have being talking to goclever support and more firmwares are going to be added to the site. if you want yours adding send them an email requesting it (one may not be enough ) i have just had this problem and after a month they agreed to take it back and have reflashed it for me
hope this helps someone
Hi.
My dad bought an Ampe 10 and one day it simply didn't start. So I'm trying to fix it.
I'm suppose to be able to get into a recovery menu if i hold volume - and power it on. But it stops at the android character with the thing spinning in its stomach. I've tried installing livesuit but i cant find any drivers so my computer can't recognize the tablet (also tried Pdanet).
Now I have no idea what to do?
Anyone know how i can fix it?
Excuse my english.
Help appreciated!
/ Robin
nöt said:
Hi.
My dad bought an Ampe 10 and one day it simply didn't start. So I'm trying to fix it.
I'm suppose to be able to get into a recovery menu if i hold volume - and power it on. But it stops at the android character with the thing spinning in its stomach. I've tried installing livesuit but i cant find any drivers so my computer can't recognize the tablet (also tried Pdanet).
Now I have no idea what to do?
Anyone know how i can fix it?
Excuse my english.
Help appreciated!
/ Robin
Click to expand...
Click to collapse
you might want to also try asking over at slatedroid (they have a forum dedicated to that tablet).
sorry i can't be more help.
HELP OR ASSIST PLEASE , :crying:
My device doesn't startup/boot since
Accidentally deleted some folder and files on Root directory
I try to Charge several times my Battery, also bought a new one.
But it doesn't fix, startup or boot my Device
-
The Reason is : I try to flash some Tweaks , on SuperCharger v6
Expecting for some Better result's on my device , but it only keeps my Battery Drain so fast .
I try to Remove the SuperCharger v6 but accidentally Deleted some Folders
Also i deleted , SuperChargerv6 File .
I didn't intentionally check those folders , i just mistouch and deleted some folder w/ files using Root Explorer on it ,
The folders is on Root directory ,
This is the name of Folder's : ( /dev & /system )
-
i can't be detected on ADB since my Driver is Unspecified
and it only shows " Qualcomm CDMA Technologies MSM "
And it installed or it turns to Human Interface Device "USB Input Device"
What should i do if it doesn't Detect my device when i try to type in adb : adb shell
no devices is showing
This is my device : Starmobile ICON
Specs :
Starmobile Icon Specifications
1.2GHz quad-core Qualcomm Snapdragon MSM8225Q processor
4.5-inch qHD (540x960) IPS capacitive dipslay, 245ppi
Multi-touch with Asahi Dragontrail Glass
350MHz Adreno 203 GPU
Android 4.1.2 (Jelly Bean)
1GB of RAM
4GB of Internal Storage
microSD card slot up 32GB
3G/HSPA (WCDMA 850/2100)
HSDPA 7.2mbps / HSUPA 5.76mbps
GSM 850/900/1800/1900 (Quad-band)
WiFi 802.11 b/g/n / WiFi Hotspot
microUSB v2.0 / Bluetooth
Li-Ion 1,800mAh Battery
Light / Proximity / Gravity Sensor
Iam begging for answer and helps :crying:
Actually this is my first time to post this kind of thread i hope someone could really help me with this
This is my only Phone i keep this a couple of months , but i can't afford to lose this my father will kick my ass and kill me if he will know this phone had this problem
Hi
Thanks for writing to us at XDA Assist. Well, you're in a bit (actually, a lot) of trouble here. By deleting /system you've completely erased your operating system, so there's absolutely no way your phone is going to boot no matter how many new batteries you put into it, there's no operating system for the phone to boot into. I need some more information please, does the device power on at all? Do you see a never-ending boot animation? Or are there absolutely no signs of life from the phone?
timmaaa said:
Hi
Thanks for writing to us at XDA Assist. Well, you're in a bit (actually, a lot) of trouble here. By deleting /system you've completely erased your operating system, so there's absolutely no way your phone is going to boot no matter how many new batteries you put into it, there's no operating system for the phone to boot into. I need some more information please, does the device power on at all? Do you see a never-ending boot animation? Or are there absolutely no signs of life from the phone?
Click to expand...
Click to collapse
Thank you so much for Response sir :crying:
Absolutely no Boot , No sign of anything . but when i try to put a new Battery on it , it boot for a couple of times :
Logo of Carrier after 4 tries of booting , coz iam hoping to boot in to Bootloader , stock recovery and trying if CWM still exist
It turns back to deadboot , and no startup no power , but still Detectable at my Desktop
My desktop is Windows 7 ultimate x64-bit Service pack 1 , is it possible or how can i forcely Flash system.ext4.tar or /system File on it ? and is it Okay or Possible to flash a Firmware that comes from another Model/Device that has same Specifications ?
i try to explore and search deep on any GSM or related to my problems ,
Try some " how to install driver of Qualcomm MSM8225Q , how to install qualcomm drivers , how to flash on ADB , but still no luck ..
Also on my Starmobile ICON , this is one of my Problem, is Where do i hell can i get this phone model FIRMWARE Thats what the tech told me " Only Stock Firmware is my Main Solution "
Please help me iam just a teenager , can't afford to buy a new one , and still hoping to revive my Phone
Anyway tnx again from your response sir :crying:
rekz100 said:
Thank you so much for Response sir :crying:
Absolutely no Boot , No sign of anything . but when i try to put a new Battery on it , it boot for a couple of times :
Logo of Carrier after 4 tries of booting , coz iam hoping to boot in to Bootloader , stock recovery and trying if CWM still exist
It turns back to deadboot , and no startup no power , but still Detectable at my Desktop
My desktop is Windows 7 ultimate x64-bit Service pack 1 , is it possible or how can i forcely Flash system.ext4.tar or /system File on it ? and is it Okay or Possible to flash a Firmware that comes from another Model/Device that has same Specifications ?
i try to explore and search deep on any GSM or related to my problems ,
Try some " how to install driver of Qualcomm MSM8225Q , how to install qualcomm drivers , how to flash on ADB , but still no luck ..
Also on my Starmobile ICON , this is one of my Problem, is Where do i hell can i get this phone model FIRMWARE Thats what the tech told me " Only Stock Firmware is my Main Solution "
Please help me iam just a teenager , can't afford to buy a new one , and still hoping to revive my Phone
Anyway tnx again from your response sir :crying:
Click to expand...
Click to collapse
Unfortunately I can't find any stock firmware for your device anywhere so your options are pretty limited. You can try asking your question here:
Android Q&A, Help & Troubleshooting
If you're unable to get help there then I think your only option is to take the device to a service centre and have it inspected by professionals.
timmaaa said:
Unfortunately I can't find any stock firmware for your device anywhere so your options are pretty limited. You can try asking your question here:
Android Q&A, Help & Troubleshooting
If you're unable to get help there then I think your only option is to take the device to a service centre and have it inspected by professionals.
Click to expand...
Click to collapse
By the way tnx again :crying: :crying: :crying: :crying: :crying:
Thread closed, thanks.
Hi there,
I am using a Q8H 2014 02 20 A23 Allwinter tablet. This tablet has pretty bad battery issues so I have looked to swap the battery with one from my older tablet (this doesn't fit its far to big) however my issue before and after replacing the battery is the OS would constantly reboot as soon as I got to the homescreen I litterally get 1minute into it then it reboots again. Have already tried to factory reset and it sits there with the dead android logo guy and does nothing.
I am wanting to know if this indeed a OS issue if so how can I fix it I have had a search on the net trying to find the ROM file for this model but I am unable to find what I require, I saw when it goes into recovery that I can grab a rom via SD card if I am not mistaken.
Is it possible for someone to help me with the rom file I require and able to tell me if this will fix my issue??
Thanks for your help in advance.
Regards,
Time Bandit
Apologies if I have put this in the wrong place.
Hello elders. I hope that I'm in the right session for my ask. I have tried to update my tecno 7c android 5.0 based tablet (that I've bought, just a month ago) cause it proposed it to me in the settings, software update option. Everything went well till the end of the download. After that, my tablet rebooted correctly and came to the android home screen. But each time I put any SIM card inside, I always have this message: "com.phone stopped working". I've tried to perform a full reset of the phone through the stock recovery but I don't even have access to recovery now. The phone is MTK 6582 processor based tablet. I've tried to read on internet to see if there's a way to fix it but the one I've found explained that I need a same working tablet whose backup file I'll flash on the bricked one through SP FlashTool to revive it but I have nobody having such tablet. Help please if you have solutionq for me. Very urgent. My tablet, the only on I have! Thanks in advance.
Hello! Nobody to answer me?