Related
hello,
one of my friends recently arrived with a tricky problem.
he has an old-ish LG Optimus One that he flashed badly and now is stuck on continous boot loop.
all it displays is:
fastboot mode started
udc.start()
Click to expand...
Click to collapse
however, unlike the problem fixed here: http://forum.xda-developers.com/archive/index.php/t-1088046.html
it does not recognize USB cable:
fastboot mode started
udc.start()
-- suspend --
-- suspend --
-- suspend --
Click to expand...
Click to collapse
it only says suspend even after multiple plug-ins and no driver pops up on my PC or his...
i call it permanently bricked:crying:, but i'd like a second opinion?
Try TO boot recovery
Inviato dal mio LG-P500 usando Tapatalk
andrea210701 said:
Try TO boot recovery
Inviato dal mio LG-P500 usando Tapatalk
Click to expand...
Click to collapse
it doesnt boot in any other mode except EMERGENCY.
every other mode results in boot loop with the previous messge
Flash firmware in emergency mode via lgmdp
Inviato dal mio LG-P500 usando Tapatalk
andrea210701 said:
Flash firmware in emergency mode via lgmdp
Inviato dal mio LG-P500 usando Tapatalk
Click to expand...
Click to collapse
My phone had same problem as his... unfortunately drivers won't install properly and I had my phone in service...
Sent from my LG-P500
andrea210701 said:
Flash firmware in emergency mode via lgmdp
Inviato dal mio LG-P500 usando Tapatalk
Click to expand...
Click to collapse
This worked for me too. Try it! Good luck!
The udc_start() screen appears for me occasionally when I fail to boot into Clockwork Mod (Seems random)
I simply take out my battery, count to 5, put it back in, and try again - Normally works after 2 or 3 retries *Shrugs*
Hey, i have a same problem, nothing work, only:
fastboot mode started
udc.start()
-- suspend --
-- suspend --
-- suspend --
the same what you have... is here is anybody who can fix it?
oh, by the way i have LG P350, not P500... but problem is the same...
imax64 said:
hello,
one of my friends recently arrived with a tricky problem.
he has an old-ish LG Optimus One that he flashed badly and now is stuck on continous boot loop.
all it displays is:
however, unlike the problem fixed here: http://forum.xda-developers.com/archive/index.php/t-1088046.html
it does not recognize USB cable:
it only says suspend even after multiple plug-ins and no driver pops up on my PC or his...
i call it permanently bricked:crying:, but i'd like a second opinion?
Click to expand...
Click to collapse
Simply take out the battery. If your friend is rooted, has a recovery and a working ROM on his sd card, ask him to flash that by booting into recovery
Sent from my LG-P500 using xda premium
abanka27 said:
Simply take out the battery. If your friend is rooted, has a recovery and a working ROM on his sd card, ask him to flash that by booting into recovery
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
i managed to find the problem:
i've conected to the device via jtag interface and attampted to erase the curent flash. it failed at abut 25%(bad block).
after checks it turned out it has a phisycal problem bloc problem . i've atempted to make a full dump igonrign bad sectors, and now it boots until LG logo.
atleast its loading something now.:laugh: aparently there is no way to fix this exccept for a motherboard replacement.
Same problem with lg p350
I have the same problem with my LG P350.
but my phone doesn't even boot to emergency mode.
Every time i connect it to usb it says
port change-
suspended-
Did anyone of you guys try this tutorial first?
http://forum.xda-developers.com/showthread.php?t=1088046
It had worked for me.
here's the solution..
disconnect everything(usb, charger etc)
u need to remove battery of ur cell phone
then hold both volume keys..(dont touch power or call or nay other key.)
then connect usb to ur pc.. and while holding volume keys(both) connect other end of usb to cell phone and ur cell will start in emergency mode..
.
then download
KDZ_FW_UPD_EN u will find it on net just google it..
then download
any kdz software update of anything ics,2.3 anything..
then install and use kdz_fw_upd
and select type : 3GQCT
PHONE MODE : EMERGENCY
AND give the path where u downloaded kdz file
then just click launch software update and ur done..
id any problem mail me on..
[email protected]..
i will reply in 3 days...
For all u'r problems with fastboot,go and download this AndroidFlashRecovery_0.0.1.2_D,by insert the recovery file for your phone
It will erase fastboot&stuff,the will restart in same fastboot,but u wiil stop the phone ,and run recovery mode,then instal a new flash zip file
THIS WORKED FOR ME
Reinstall lg drivers( the ones you install before root)
Sent from my LG-P500 using xda premium
@imax64 i have the same problem in 2016
did you find a way to fix it?
I've unlocked, rooted and flashed linaro kernel. So my phone does/has been recognised fine by my pc.
But when I plugged it in earlier for mtp mode the phone recognised being plugged in but the pc didn't? If i switched it to camera mode the pc then recognised. But then switching it back and still nothing? Any ideas?
Sent from my Nexus 5 using Tapatalk
Ben36 said:
I've unlocked, rooted and flashed linaro kernel. So my phone does/has been recognised fine by my pc.
But when I plugged it in earlier for mtp mode the phone recognised being plugged in but the pc didn't? If i switched it to camera mode the pc then recognised. But then switching it back and still nothing? Any ideas?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Goto Devices and Printers and see if Nexus 5 is there. Sometimes it has a yellow triangle on it. If so right mouse and troubleshoot.
This happened to me too. This is what I did to fix it. I was on windows 8 btw. I used wugfresh's toolkit to manually install raw drivers. If you do use windows just follow the instructions on steps to install them. You may use Mac or Ubuntu for I know lol. In that case I would search for those tookits. They may have similar method of driver installations. I used the composite driver that came with the toolkit and it worked right after installation. I even unlocked my bootloader in the process too so adb and fastboot worked too. good luck.
wyrman said:
Goto Devices and Printers and see if Nexus 5 is there. Sometimes it has a yellow triangle on it. If so right mouse and troubleshoot.
Click to expand...
Click to collapse
I can't find this option? I'm on xp?
Sent from my Nexus 5 using Tapatalk
Ben36 said:
I can't find this option? I'm on xp?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Try Control Panel... Devices and Printers. Or Control Panel - Hardware and Sound - Devices and Printers
Found it, it says mtp with an exclamation mark and no drivers installed?
Sent from my Nexus 5 using Tapatalk
Ben36 said:
Found it, it says mtp with an exclamation mark and no drivers installed?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
DL google adb drivers and put them in a folder. Click on the device in device manager and choose install from computer. Select the drivers. That should clear it up.
Ben36 said:
Found it, it says mtp with an exclamation mark and no drivers installed?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Alot of times you can right mouse the device and troubleshoot. It will put the drivers back in. Another way is to delete that device and reboot. When you plug your phone into the usb it should load drivers.
theesotericone said:
DL google adb drivers and put them in a folder. Click on the device in device manager and choose install from computer. Select the drivers. That should clear it up.
Click to expand...
Click to collapse
Nope, still says cannot install the hardware?
Sent from my Nexus 5 using Tapatalk
Toggle USB Debugging . Worked for me. If we have the community or ADB driver this might be the issue?
Sent from my Nexus 7 using xda app-developers app
Ben36 said:
Nope, still says cannot install the hardware?
Click to expand...
Click to collapse
Well then? Sorry man it has always worked for me. I'd try rebooting the comp then doing it again. If that doesn't work Ubuntu is free. lol
rye&ginger said:
Toggle USB Debugging . Worked for me. If we have the community or ADB driver this might be the issue?
I'm using the PDA.net drivers included with the Nexus Root Toolkit. The Universal drivers didn't work for me (Windows 7 pro x64bit). I also had to toggle the USB Debugging.
Click to expand...
Click to collapse
Ben36 said:
Nope, still says cannot install the hardware?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Device Manager. Uninstall that device and reboot. Plug your phone back in and it shud install the drivers
Tried, still nothing.
Sent from my Nexus 5 using Tapatalk
Ben36 said:
Tried, still nothing.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
So MTP is no longer in Device Manager?
Nope its vanished and the phone still isn't recognised by the pc. And now if I try a toolkit and tell it to reboot to recovery it says not device found even though the device says it's plugged in with usb debugging enabled
Sent from my Nexus 5 using Tapatalk
Ben36 said:
Nope its vanished and the phone still isn't recognised by the pc. And now if I try a toolkit and tell it to reboot to recovery it says not device found even though the device says it's plugged in with usb debugging enabled
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I haven't used XP for quite awhile bud. Shud be under Devices that you can scan to see it it will get picked up.
---------- Post added at 05:05 PM ---------- Previous post was at 04:51 PM ----------
Are you using the USB cable that came with the phone bud?
Debugging off. Here's a link
http://productforums.google.com/forum/#!topic/nexus/N-QCblB5gKQ
Someone in that link mentioned the mtp option on the N5 . where is this option please?
Sent from my Nexus 5 using Tapatalk
Ben36 said:
Someone in that link mentioned the mtp option on the N5 . where is this option please?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Settings/storage. Choose 3dot menu. Also, have you used USBDeview http://www.tomsguide.com/us/download/USBDeview,0301-13254.html to be sure all Android USB drivers have been removed?
Sent from my Nexus 7 using Tapatalk 4
In case you didn't understand the above.
Settings > Storage then click on the menu (3 dots on upper right screen corner) and USB computer connection. voila, you are now in the USB connection settings and can enable MTP/PTP again.
Trying to install the TWRP on my LGD850 from AT&T , after the reboot then got black , doens't starts in any way , no dowmload mode or anything else , but the Computer recognize as MTP and LG Mobile USB serial port (com30) , so any ideas how can I bring to life my phone? thanks
Madness_logic said:
Trying to install the TWRP on my LGD850 from AT&T , after the reboot then got black , doens't starts in any way , no dowmload mode or anything else , but the Computer recognize as MTP and LG Mobile USB serial port (com30) , so any ideas how can I bring to life my phone? thanks
Click to expand...
Click to collapse
What happens when you try to enter download mode as you'll need that to go back to stock.
Sent from my LG-D800 using Tapatalk
hyelton said:
What happens when you try to enter download mode as you'll need that to go back to stock.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Nothing , it doesnt do anything like I said
Madness_logic said:
Nothing , it doesnt do anything like I said
Click to expand...
Click to collapse
Made sure it was connected to a USB 2.0 port? And not a 3.0 port when trying?
Also if it's a "hard brick" you cannot fix that.
Sent from my iPhone using Tapatalk
hyelton said:
Made sure it was connected to a USB 2.0 port? And not a 3.0 port when trying?
Also if it's a "hard brick" you cannot fix that.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Shi*, also its in a usb 2.0 , and sure I cant Fix it? because when I connect USB cable without the battery show a empty battery with a yellow triangle
Madness_logic said:
Shi*, also its in a usb 2.0 , and sure I cant Fix it? because when I connect USB cable without the battery show a empty battery with a yellow triangle
Click to expand...
Click to collapse
If there's no download or fastboot mode I don't think there's nothing else can be done about that.
Sent from my iPhone using Tapatalk
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
Follow this guide but dl files for att not sprint
Hi
i have a samsung w gti 8150 ,when i connect my phone with pc on (odin mode),my pc shows a error (usb device not recognized) , any one plz help me
thanks
AAMIRAHMED1968 said:
Hi
i have a samsung w gti 8150 ,when i connect my phone with pc on (odin mode),my pc shows a error (usb device not recognized) , any one plz help me
thanks
Click to expand...
Click to collapse
Please install latest Samsung drivers! Another way to get Samsung drivers is to install Samsung kies but uninstall it prior to flash anything, otherwise nothing won't work
Sent from my SM-G928F using Tapatalk
zizon65 said:
Please install latest Samsung drivers! Another way to get Samsung drivers is to install Samsung kies but uninstall it prior to flash anything, otherwise nothing won't work
Sent from my SM-G928F using Tapatalk
Click to expand...
Click to collapse
what is mean of another way ,plz in detail
AAMIRAHMED1968 said:
what is mean of another way ,plz in detail
Click to expand...
Click to collapse
I meant that the issue you've stated in your post is related a driver problem! By now uninstall deeply any Samsung drivers, So Google for Samsung drivers, download the latest and install them. After that try flashing again
Sent from my SM-G928F using Tapatalk
i try again asur guidline
thanks again
Elephone U Pro Stock Rom Build 20180227
After many hours of coding. Took System dump and coding rawprogramm_unsparse and patch0.xml file.
I was able to successful Build the current Base as Stock Rom 20180227.
This is the first Stock Rom, faster then official release of Elephone.
i took out all dumps with "dd" all are images . thats why the zip file is a bit bigger .
to prevent losing IMEI do this:
Open the raw_programm.xml and search for modemst1 and modemst2 . Remove those lines. And save. Then go forward
OR FLASH NEWER BUILDS
you need:
1. QPST flashtools (qualcomm)
2. Qualcomm Drivers for the Device
3. a firehose file for SDM660
4. rawprogram_unsparse and patch0.xml
5. python-2.7.13.amd64
6. python 3.0
7.ADB (newest ADB files are in the zip) . copy the "adb" folder to C:/
i uploaded all here:
Stock 20180227 Build. : https://androidfilehost.com/?fid=890129502657596504
Tool files: https://1drv.ms/u/s!Am93l3qEx-D_hOcLmv0inQJ-vrVdLg
How To:
extract the downloaded zip files
1. install QPST/QFIL Flashtools
2. install both Python files
3. Install drivers ( qualcom drivers. make sure that they dont interrupt with other device drivers you have .)
you have to reboot your device into edl mode by
Code:
C:\>cd adb
adb shell
reboot edl
phone will reboot to edl mode ( black screen, no led)
Now check your device manager . the COM & LTP port should show "Qualcomm HS-USB QDLoader 9008"
if not then update the driver and choose it from your internal list. or google for it
if the driver is fine, open the QPST/QFIL FLashtool in
Code:
C:\Program Files (x86)\Qualcomm\QPST\bin\QFIL.exe
prepare the Flashtool:
in Select Build Type:
choose: Flat Build
in Select Programmer:
browse and choose the "prog_emmc_ufs_firehose_Sdm660_ddr.elf" file
( you cant see it change to "all files" )
Load XML:
now choose the rawprogram_unsparse.xml and right after the patch0.xml
you can press the "download button"
wait a bit , at the end of the flashing procedure it will make an error, thats normal because i left the patch0.xml empty.
after all disconnect the cable and hold Power button a few seconds. phone will reboot .
the build is without userdata that means it will be Stock and like a factory reset.
enjoy
want to root u PRO
look https://forum.xda-developers.com/android/development/guide-root-elephone-pro-manual-t3773960
Congratulations for all u_pro users
Great job man all your work we appreciate it
Keep it up
Wish you the best
Maherabed1986 said:
Congratulations for all u_pro users
Great job man all your work we appreciate it
Keep it up
Wish you the best
Click to expand...
Click to collapse
Thank you mate.
We will see what's next. ...twrp....my eragon Rom....etc etc.
Gesendet von meinem U_Pro mit Tapatalk
hi,
is this rom rooted?
thank you
skeleton1911 said:
Thank you mate.
We will see what's next. ...twrp....my eragon Rom....etc etc.
Gesendet von meinem U_Pro mit Tapatalk
Click to expand...
Click to collapse
I´m eagerly waiting to get my shipped new U Pro and it´s good to see that there is progress in development through such a experienced guy! Thanks in advance. Keep up your good work as the number of users will grow with our fine device.
jimibxl said:
hi,
is this rom rooted?
thank you
Click to expand...
Click to collapse
No it's not rooted
But u can visit root thread to flash the patched boot.img
Hi, skeleton1911!
I also have an Elephone U Pro my phone. Unfortunately I do not have either ROM installation or ROOT. But everything from word to word - I did as you wrote it. Fails.
The Qualcomm QPST status line is off, it does not indicate anything. Stop error message.
A port: Qualcomm HS-USB QDLoader 9008 (COM4).
Error message: Download fail: Sahara Fail: QSaharaServer Fail: Process Fail. Error: Sahara rx data error 237, and it says: Error Sahara main 924, Sahara protocol error. The status line remains blank. Storage Type: What should be set? For rooting, the same error message. After booting, enter: g.co/ABH. I can not delete it, it does not require a password! Can you help? Do you have a video file? Where did I go wrong? I look forward to your help! Thanks. Ui: Do not be sorry for bad English!
olajbogyo said:
I also have an Elephone U Pro my phone. Unfortunately I do not have either ROM installation or ROOT. But everything from word to word - I did as you wrote it. Fails.
The Qualcomm QPST status line is off, it does not indicate anything. Stop error message.
A port: Qualcomm HS-USB QDLoader 9008 (COM4).
Error message: Download fail: Sahara Fail: QSaharaServer Fail: Process Fail. Error: Sahara rx data error 237, and it says: Error Sahara main 924, Sahara protocol error. The status line remains blank. Storage Type: What should be set? For rooting, the same error message. After booting, enter: g.co/ABH. I can not delete it, it does not require a password! Can you help? Do you have a video file? Where did I go wrong? I look forward to your help! Thanks. Ui: Do not be sorry for bad English!
Click to expand...
Click to collapse
After booting you have this message . Because bootloader is unlocked.
I can't tell you what you made wrong. The first page explains all. I will re-edit it soon .
Try again.
Enable usb debugging
Then connect cable.
And use cmd with
ADB shell
Reboot edl.
Then start qfil. It will show you the ....9008 driver.
If it does. Set all in qfil again and press download ...
Gesendet von meinem U_Pro mit Tapatalk
Hi! skeleton1911!
Hello! Thank you very much for your reply. Even now I did exactly as you wrote, but the error message remained! Unfortunately! I'm looking forward to your re-editing! So i can unlock the bootloader so this message does not show up? Will the ROM update be removed? I look forward to your help! Thanks.
olajbogyo said:
Hello! Thank you very much for your reply. Even now I did exactly as you wrote, but the error message remained! Unfortunately! I'm looking forward to your re-editing! So i can unlock the bootloader so this message does not show up? Will the ROM update be removed? I look forward to your help! Thanks.
Click to expand...
Click to collapse
no. if OTA's are there, they will work.
also i removed my Eragon v1.0 a few min ago
https://forum.xda-developers.com/an...-eragon-1-0-elephone-pro-android-8-0-t3777625
Hi!
Hello! Thanks for your help! Unfortunately today I can not stand beside the computer. Tomorrow I will try to install again. Another one succeeds, then I have to succeed! Thanks.
olajbogyo said:
Hello! Thanks for your help! Unfortunately today I can not stand beside the computer. Tomorrow I will try to install again. Another one succeeds, then I have to succeed! Thanks.
Click to expand...
Click to collapse
Hi.
As I wrote back in the pm you send me. (TeamViewer ) would help to look what's wrong ....
Gesendet von meinem U_Pro mit Tapatalk
Hi!
Hello! It's a pleasure! I did it! You are super! I am also super! Windows 10 was wrong. The computer was a Spanish version of the windows 10 mini operating system. There were many important things missing from it. I've run full Windows 10 Education and everything works well! Super! Thank you for your help and patience. Thanks.
---------- Post added at 04:44 PM ---------- Previous post was at 04:15 PM ----------
Hello! I got my phone ready. But there is a big mistake! No IMEI 1, IMEI2, Meid numbers. Deleted! How can I put it back? Thanks.
olajbogyo said:
Hello! It's a pleasure! I did it! You are super! I am also super! Windows 10 was wrong. The computer was a Spanish version of the windows 10 mini operating system. There were many important things missing from it. I've run full Windows 10 Education and everything works well! Super! Thank you for your help and patience. Thanks.
---------- Post added at 04:44 PM ---------- Previous post was at 04:15 PM ----------
Hello! I got my phone ready. But there is a big mistake! No IMEI 1, IMEI2, Meid numbers. Deleted! How can I put it back? Thanks.
Click to expand...
Click to collapse
Lol
Never had that problem. And don't know what you did but,
Flash the stock rom again. And nothing else.
That should bring them back
Gesendet von meinem U_Pro mit Tapatalk
HI!
Hello! I did the Eragon ROM version but I did not get an IMEI number. Then with the Stock ROM version, but did not have an imei number. I did not do anything. I did exactly what you wrote. Could the imei number be lost during ROOT? There is certainly a trick that can back up IMEI numbers to this phone.
Hi!
After re-installing the stock ROM, enter the following:
It says Imei 1: 0
Imei 2:
Meid: 000000000000000
olajbogyo said:
After re-installing the stock ROM, enter the following:
It says Imei 1: 0
Imei 2:
Meid: 000000000000000
Click to expand...
Click to collapse
Can you try IMEI repair apps from playstore .
Or can you enter engineering mode? Google for it
If you are able to . Here is a IMEI restore guide.
https://www.androidbrick.com/ultimate-guide-qualcomm-snapdragon-imei-baseband-repair-fix-part-2/
You need to have a working modem1st and 2st.img.
Use the two of the stock rom. Or someone maybe can take a backup and upload them.. I can't now. (I'm at work)
Or look
https://www.youtube.com/watch?v=Xq2PFIzYaLE
Gesendet von meinem U_Pro mit Tapatalk
Follow this guide and you can restore IMEI
https://www.youtube.com/watch?v=Xq2PFIzYaLE
Gesendet von meinem U_Pro mit Tapatalk
Hi!
Hello!
Thanks for your help!
Although we have not been able to restore the imei numbers yet. There must be some other trick on this phone.
Do not have a phone keypad with which to write?
I look forward to your help!
Hi!
Hello! I think of a code on the Elephone U Pro phone like the VERNEE APOLLO LITE the best way to restore imei: * # 6813 # and put the imei ...... 100% WORKING. Does that exist?