Database Info

Soft brick Cubot x6/MT6592 device

Hello everyone I have a few questions. First to say that I'm not new to android yet I don't think I'm very advanced. Anyway here is my situation: I have brand new chinese phone Cubot x6 which is with MT6592 chipset(or CPU I'm not sure). I rooted the device with Framaroot and everything was OK. Then I found CWM for the device on needrom(dot)com and when I flashed the recovery with "Flashify" it rebooteed but it is now stuck on the kernel logo. I can enter only in recovery which is still the stock one . I can't do anything except entering into the stock recovery. I have the stock ROM but it is NOT in a flashable .zip but in a folder which is used by some flashtool program (not the one for Sony but rather for MT devices) I have the stock boot.img, recovery.img and system.img. When I try to "apply update from sideload" and sideload either the boot or recovery images I get "installation aborted". If you guys can tell me how to enter fastboot mode and from there to flash system.img OR any other way to fix the phone please tell me.
P.S. The hardware buttons are only volume rockers and power button. I also tried to install MUIU but it can't flash it with stock recovery.

Please help me. I would be able to manage it somehow if I'm able to use adb, but I can't within the stock recovery.

hello dont problem use sp flashtool and flash rom stock
http://www.needrom.com/mobile/cubot-x6/
ROM
http://www.needrom.com/wp-content/uploads/2014/05/G807_C1_D1_CUBOT_V0.9.rar
SP FLASH TOOL
http://www.needrom.com/wp-content/uploads/2014/01/SP_Flash_Tool_v5.1348.00.zip
Description
ROM Mobile Cubot X6 – ROM Android 4.2.2
ONLY MT6592
Official ROM Cubot X6 Version: G807_C1_D1_CUBOT_V0.9
Gapps include – No Rooted
Language support: Multilang
Install ROM:
- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6592_Android_scatter_emmc.txt in ROM
- Wait file to be added into Flash Tool
- choose Option->USB Model,click USB Model
–> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
- Turn off your phone, remove the battery.
- "Press F9 (hit Download button)" OR " if upgrade ROM Firmware->Upgrade "
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on.

Would it be possible for you to upload it to a different site? it seems that the download just cuts off all the time. I tried about 5 times after 10 mins it just stops. I bricked my phone the first day cuz i didnt know it wasnt compatible with Xposed installer
ZALACAYN2 said:
hello dont problem use sp flashtool and flash rom stock
http://www.needrom.com/mobile/cubot-x6/
ROM
http://www.needrom.com/wp-content/uploads/2014/05/G807_C1_D1_CUBOT_V0.9.rar
SP FLASH TOOL
http://www.needrom.com/wp-content/uploads/2014/01/SP_Flash_Tool_v5.1348.00.zip
Description
ROM Mobile Cubot X6 – ROM Android 4.2.2
ONLY MT6592
Official ROM Cubot X6 Version: G807_C1_D1_CUBOT_V0.9
Gapps include – No Rooted
Language support: Multilang
Install ROM:
- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6592_Android_scatter_emmc.txt in ROM
- Wait file to be added into Flash Tool
- choose Option->USB Model,click USB Model
–> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
- Turn off your phone, remove the battery.
- "Press F9 (hit Download button)" OR " if upgrade ROM Firmware->Upgrade "
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on.
Click to expand...
Click to collapse

http://pan.baidu.com/s/1jGn3mvk
Enviado desde mi CUBOT X6 mediante Tapatalk

Thank you very much
ZALACAYN2 said:
http://pan.baidu.com/s/1jGn3mvk
Enviado desde mi CUBOT X6 mediante Tapatalk
Click to expand...
Click to collapse

I know this is an old thread, but please understand that I'm following this and I need help as I have the same phone and I haven't found any other updated threads on this topic.
ZALACAYN2 said:
Install ROM:
- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6592_Android_scatter_emmc.txt in ROM
- Wait file to be added into Flash Tool
- choose Option->USB Model,click USB Model
–> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
- Turn off your phone, remove the battery.
- "Press F9 (hit Download button)" OR " if upgrade ROM Firmware->Upgrade "
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on.
Click to expand...
Click to collapse
I'm following this, as I tried to do this before, I was apparently doing something wrong and I couldn't get to the part where the program would actually flash it and it never showed progress bars or even detected the phone, now finally my phone is recognized by the program and it's now stuck on the red progress bar, when I put my mouse over it says "Download DA Now..." ?? what is it?
Should I do something, I don't wanna stop it with fear it may brick completely...
7 mins has passed, do I leave it there? I just saw the red progress bar going up to 100% and stay there... Nothing more, purple, or yellow :crying:
Does it usually takes that much? Another thing is that I don't see the device (usb) showing up in the Device Manager... is something going on? the sp flash tool might have become stuck on it doing nothing, but like I said, I dont wanna stop it with fear it might be actually doing something, and then I break it :S

@0xNOP nop,it doesnt take that long

0xNOP said:
I know this is an old thread, but please understand that I'm following this and I need help as I have the same phone and I haven't found any other updated threads on this topic.
I'm following this, as I tried to do this before, I was apparently doing something wrong and I couldn't get to the part where the program would actually flash it and it never showed progress bars or even detected the phone, now finally my phone is recognized by the program and it's now stuck on the red progress bar, when I put my mouse over it says "Download DA Now..." ?? what is it?
Should I do something, I don't wanna stop it with fear it may brick completely...
7 mins has passed, do I leave it there? I just saw the red progress bar going up to 100% and stay there... Nothing more, purple, or yellow :crying:
Does it usually takes that much? Another thing is that I don't see the device (usb) showing up in the Device Manager... is something going on? the sp flash tool might have become stuck on it doing nothing, but like I said, I dont wanna stop it with fear it might be actually doing something, and then I break it :S
Click to expand...
Click to collapse
sorry but my english is very poor , in the past , i make this tutorial , is in my spanish language but i have pics ,
http://www.htcmania.com/showthread.php?t=833168

[email protected] said:
@0xNOP nop,it doesnt take that long
Click to expand...
Click to collapse
Alright, thanks for letting me know, i know what is causing to behave like that, the thing is that the usb is abruptly getting disconnected, so when it gets detected it starts working like a charm and it starts detecting the phone in the sp flash tool, etc etc but when its about to start really doing anything like flashing or anything concrete the usb simply disconnects and I dont even see it anymore in the Device Manager list... And it appears as "Mt65xx Loader" in the Device Manager, for just few seconds before terminating... Might be that Im using the wrong drivers or The wrong cable ??? Or both??? I'm using an usb cable that was made for an HTC and it had assigned the drivers of my HTC phone... But at the same time, it uses that Mt65xx Loader driver thing that I installed as well...
ZALACAYN2 said:
sorry but my english is very poor , in the past , i make this tutorial , is in my spanish language but i have pics ,
<Link>
Click to expand...
Click to collapse
Hello, my first language is spanish also, so I understood the tutorial, however, you can refer to the reply that i sent to Qwerty, above, since the problem I think is on either the drivers im using or the cable itself....

Hmmmm so your problem is your connection disconnects after flashing starts .I helped a guy who had a similliar problem (his USB disconnected after 3 seconds so the tool doesn't flash ) I'll look it up again .
In the meantime I would like to know the condition of your phone like how you bricked it ,does the phone show any sign of life etc...

[email protected] said:
Hmmmm so your problem is your connection disconnects after flashing starts .I helped a guy who had a similliar problem (his USB disconnected after 3 seconds so the tool doesn't flash ) I'll look it up again .
In the meantime I would like to know the condition of your phone like how you bricked it ,does the phone show any sign of life etc...
Click to expand...
Click to collapse
Yup, Oh Lord, ty, I will really appreciate if you can give me a hand on this one and you're working on it alrdy so I'm really grateful :silly: :good:
Alright, conditions, it does shows signs of life, however, I can get past the boot logo, to the "main screen" where launcher is etc, etc... But the thing is that, since I was working on a rootkit, I disabled many of the processes that I saw were 'suspicious' by suspicious I mean (e.g.) "com.gogle.services" with version: "1.4" instead showing something like process: "com.google.services" with version (e.g.) "version: 4.4.22.493 build: 493823-22-1114" you see.
So I started deleting those processes and installed ES File Manager, which it has a built-in cleaner, so after I finished disabling those processes, I started deleting junk files like a mad man using ES File Manager, and I remember going to the root and deleting the majority of the folders and files that I saw, so probably that's whats happening
Now with that previous story told... Now when I get past the boot logo, I just get this plain black screen, with only the battery status showing up, like literally only that, and the top scrollable menu, I'm able to carry it down but it has no notifications whatsoever, when I plug in the USB (while the phone is on) I get nothing whatsoever from the phone to the computer...
Hope this info helps in debugging whats going on here
Reference: https://youtu.be/jfgDs9eSq0g

Try these and let me know if any of these works
1)try uninstalling the drivers. Then reinstall ,reboot PC and try to flash again
2) does your phone has meta mode? Some mt65xx phone have it. To try accessing it do the following
Load the scatter like usual in sp flash tool ,click download ,now power off your phone(with battery) and connect to pc but hold vol+ button as well .(sometimes you need to hold the vol+ button throughout the whole flashing)
As far as your story goes the final solution is either1) flashing your stock ROM or 2)flash a custom recovery and install a custom rom but both of these require the sp flash tool process to work.
Edit : you know I'm telling you this because I believe you tried factory reset already ,if you havnt try it first.
Sp flash tool is for unbricking mostly.

[email protected] said:
Try these and let me know if any of these works
1)try uninstalling the drivers. Then reinstall ,reboot PC and try to flash again
2) does your phone has meta mode? Some mt65xx phone have it. To try accessing it do the following
Load the scatter like usual in sp flash tool ,click download ,now power off your phone(with battery) and connect to pc but hold vol+ button as well .(sometimes you need to hold the vol+ button throughout the whole flashing)
As far as your story goes the final solution is either1) flashing your stock ROM or 2)flash a custom recovery and install a custom rom but both of these require the sp flash tool process to work.
Click to expand...
Click to collapse
Alright, thanks for the suggestions, I will try to do all of them and get back with results, hopefully with a fixed phone :S :S :S :good:

Just so you know ,I edited my previous post

[email protected] said:
Just so you know ,I edited my previous post
Click to expand...
Click to collapse
Thank you for everything!
Finally got it to work! everything was working good, except the phone itself since it was semi-bricked apparently it couldn't make it to activate the usb system itself... however I went to SP Flash Tool and instead using only "Download" option, I instead used "Format All + Download" ... And then the USB didn't disconnected anymore and then I saw the tool working on it and the progress bars running perfectly! it took like less than 50 seconds to do everything when I saw the big green check mark on my screen!!!!!!!!!!!!!!! AMAZING!! Thanks!

0xNOP said:
Thank you for everything!
Finally got it to work! everything was working good, except the phone itself since it was semi-bricked apparently it couldn't make it to activate the usb system itself... however I went to SP Flash Tool and instead using only "Download" option, I instead used "Format All + Download" ... And then the USB didn't disconnected anymore and then I saw the tool working on it and the progress bars running perfectly! it took like less than 50 seconds to do everything when I saw the big green check mark on my screen!!!!!!!!!!!!!!! AMAZING!! Thanks!
Click to expand...
Click to collapse
Glad it worked for you ,good luck
BTW if you like avoiding the default bloatwares you might wanna try a custom ROM like cyanogen .look up development for your phone in xda or 4pda

Vodafone VFD 300 Free Network Unlock Done! 10000% Working!

How to unlock Vodafone vfd300 any network any carrier?
Follow the instructions.
Download:
https://mega.nz/#F!MpM2QRYT!j8GtDwqyhU7TsunOZxadmg
Click on Flash_tool.exe
- Select "scatter-Loading" and search MT6580_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- Select "Download Only"
- Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
- Press “Download” button to start
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
-Start recovery and wipe data and cache.
-Reboot system
- Finish !
-ENJOY!!!

Hi there Mercyless,
I tried your instructions step by step but I'm getting this error message when I load the scatter file:
Partition[frp] shoult NOT set "is_download" to true in scatter file
Please check
What can I do? Thanks.

Bogdanux said:
Hi there Mercyless,
I tried your instructions step by step but I'm getting this error message when I load the scatter file:
Partition[frp] shoult NOT set "is_download" to true in scatter file
Please check
What can I do? Thanks.
Click to expand...
Click to collapse
No problem my friend!
Just use this sp flashtool:
https://mega.nz/#F!0pU01Y4C!shO88mJ-svGJ8tni_5DmLA
:good:

Hi again,
I tried your version but I get the following error:
BROM ERROR : S_BROM_CMD_STARTCMD_FAIL (2005)
Tried the general fixes of this error but no help. Also, I used the latest SP Flash Tool from the official website and another ROM and it worked (only without battery).
I'll try on a different computer with your downloads to see if I get the same result.

Bogdanux said:
Hi again,
I tried your version but I get the following error:
BROM ERROR : S_BROM_CMD_STARTCMD_FAIL (2005)
Tried the general fixes of this error but no help. Also, I used the latest SP Flash Tool from the official website and another ROM and it worked (only without battery).
I'll try on a different computer with your downloads to see if I get the same result.
Click to expand...
Click to collapse
This means that the device will try to turn it on, not start flash mode.
First, charge the battery.
Do not use the latest flashtoolt, use what i've shown, the older version!!
Reinstall the drivers, use another cable.
The firmware is working, I've used it many times! :good:

Feedback please...
Hi there,
I want to root also, can anyone give a feedback on theses procedures. Are they working?
Thanks

Scam
File won't even download, gets to 51% then stops, tried 3 times now

I'm trying to download the file. After using i will give feedback.

NoName4me82 said:
File won't even download, gets to 51% then stops, tried 3 times now
Click to expand...
Click to collapse
SCAM???
Do not talk stupid things!!
If you can not download a simple file, do not come here!
Downloading works, files are good!
Do not lie to others, ugly thing!

Usb debugging????
I flashed my vfd300 with the stock rom using spflash but i made a rookie mistake by not turning debugging on resulting in phone stuck at spinning circle, will this flash withouy debugging, or do you know any way i can enable it using adb or fastboot??
cheers

jonny5alen said:
I flashed my vfd300 with the stock rom using spflash but i made a rookie mistake by not turning debugging on resulting in phone stuck at spinning circle, will this flash withouy debugging, or do you know any way i can enable it using adb or fastboot??
cheers
Click to expand...
Click to collapse
The first departure is 15-20 minutes, just wait.

Waited much longer,
Mercyless said:
The first departure is 15-20 minutes, just wait.
Click to expand...
Click to collapse
I left it all night and it never got past the circle, ive just managed to flash again using a difarent rom so ill see if this one works,
im stiull waiting for your one to download, when its finidhed will it flash with out usb debugging enabled ?

Hello,my device is already rooted but it is network locked. If i flash this scatter file,will i lose root after flashing?

Trace.Oneil said:
Hello,my device is already rooted but it is network locked. If i flash this scatter file,will i lose root after flashing?
Click to expand...
Click to collapse
Hi Friend! Root will not be available.

jonny5alen said:
I left it all night and it never got past the circle, ive just managed to flash again using a difarent rom so ill see if this one works,
im stiull waiting for your one to download, when its finidhed will it flash with out usb debugging enabled ?
Click to expand...
Click to collapse
I'm Hungarian, I do not understand the question.
Please write more clearly.

Mercyless said:
Hi Friend! Root will not be available.
Click to expand...
Click to collapse
So if i flash this i will lose root?

Flashed it?
Hi merciless,
I finally managed to flash our rom just now but its still just stopping at a spinning circle, Any Ideas mate
---------- Post added at 04:20 PM ---------- Previous post was at 04:17 PM ----------
Mercyless said:
I'm Hungarian, I do not understand the question.
Please write more clearly.
Click to expand...
Click to collapse
Sorry,
what i meant was that i managed to flash a stock rom but it never actually booted up, it just gets to a spinning disc
but originally i never enabled usb debugging so i fear that is where the issue is do you know of anyway to enable usb-debugging via adb\fastboot?

jonny5alen said:
Hi merciless,
I finally managed to flash our rom just now but its still just stopping at a spinning circle, Any Ideas mate
---------- Post added at 04:20 PM ---------- Previous post was at 04:17 PM ----------
Sorry,
what i meant was that i managed to flash a stock rom but it never actually booted up, it just gets to a spinning disc
but originally i never enabled usb debugging so i fear that is where the issue is do you know of anyway to enable usb-debugging via adb\fastboot?
Click to expand...
Click to collapse
Unfortunately I do not know how to work this way with adb / fastboot.
I did not have to use it yet.
If you do not start the system to do a hard reset, it will surely be good afterwards.
After the hard reset, the first start is 15-20 minutes, just wait patiently.
I will also make a video about the installation, I hope it will help.

Trace.Oneil said:
So if i flash this i will lose root?
Click to expand...
Click to collapse
Yes, she needs to re-root.

vfd 300
I found another ROM - [MT6580_S00_EMMC_MRA58K__6.0_VFD 300_Vodafone_356774071726533_08_19_2016_09_02_53
and after flashing it with this one, everything appeared fine. The language was Vietnamese or somemthing and the region from Australia & East Asia, but still I managed to change it, root the phone and setup my stuff... with only one big problem, when I insert my SIM card, it asks for a network lock [NP] and says I have 99 attempts left.
---------- Post added at 07:32 AM ---------- Previous post was at 07:23 AM ----------
i have tried but my phone keep disconecting after 2 second and procces fails, but when am using this ROM --MT6580_S00_EMMC_MRA58K__6.0_VFD 300_Vodafone_356774071726533_08_19_2016_09_02_53 it is flashing well but sim is locked .......i have tried bettery trick the phone dont disconect but nothing is happening.
HELP ME PLEASE!!!!!!!!!

[Tutorial][MTK] IMEI Repair Solution for Moto C Plus XT1721

IMEI Repair Solution for Moto C Plus XT1721​
A common problem many face in their phone is loss of IMEI no. This is results in no network detection by your phone. U can come to know you have lost your IMEI by checking Settings->About phone->Phone information. There under IMEI section you won’t be finding your mobile IMEI numbers displayed.
Don’t worry you can restore your IMEI’s. Just follow this guide and you will be able to restore your IMEI.
Code:
Exclusive method for fix null IMEI or restore IMEI on Moto C Plus xt1721 only
REQUIREMENTS:
-Need some files
-Patience
-Working brain
INSTRUCTIONS ​
1. First flash Moto C Plus stock rom..choose Format+download on Sp tool
2. Download MauiMETA_exe and install the tool
3. Download Mtk_CDC driver and install it. this is very important driver for MauiMETA tool if u have already just skip this step.
4. Run MauiMETA tool, click on Reconnect
5. Switch off your phone and connect through USB, without press any button.( U need to first power off and remove battery and insert the battery then connect to USB, pls dont press any buttons while connecting phone)
6. Wait for MauiMETA tool detect the phone.((connect phone via USB, wait windows 2nd beep of driver detection.,now keep pressing vol- key ,,it should detect,, try this if automatically not detected))
7. Next, select IMEI download, then click change nvram database,,select the proper data base from stock rom or from HERE.
8. Next write both (SIM1 & SIM2) Original IMEI. OR click on load from file download file from HERE.
9. Next hit download to target.
10. Aand wait,, if it shows error window, just ignore that , disconnect USB and power on the device.
11. NOw check IMEI by *#06# ,and see u got both IMEI,,`:good:
<<IMAGE INSTRUCTIONS AVILABLE>>​
____ENJOY____ ​
CREDITS:
-It's my own work to fix IMEI all credits goes to shr!pad
-Thanks for MauiMETA Tools
If u feel this Tutorial is helpful hit thanks button​

ChinmayDalal said:
No dude it isn't working..
There was no error in sp flash tool, stilll my IMEI is 0000000000
I should mention that i had once used format all+ download to fix my bootloop (wrote about it earlier).
---------- Post added at 06:05 PM ---------- Previous post was at 06:03 PM ----------
Can I try flashing the image in twrp?
Now I won't do anything without asking
EDIT: yes, it is working now. Had to run that echo command again, with a modification in the path : it is dev/radio/pttycmd1
Thanks a lot , dude
You the man:highfive:
Click to expand...
Click to collapse
welcome..
u got recovery boot-loop bcs..u rebooted device in NO OS INSTALLED warning!! in TWRP recovery
it happens this time

ChinmayDalal said:
No dude it isn't working..
There was no error in sp flash tool, stilll my IMEI is 0000000000
I should mention that i had once used format all+ download to fix my bootloop (wrote about it earlier).
---------- Post added at 06:05 PM ---------- Previous post was at 06:03 PM ----------
Can I try flashing the image in twrp?
Now I won't do anything without asking
EDIT: yes, it is working now. Had to run that echo command again, with a modification in the path : it is dev/radio/pttycmd1
Thanks a lot , dude
You the man:highfive:
Click to expand...
Click to collapse
welcome..
u got recovery boot-loop bcs..u rebooted device in NO OS INSTALLED warning!! in TWRP recovery
it happens this time

shr!pad said:
Tutorial for restore lost IMEI on Moto_C_Plus
A common problem many face in their phone is loss of IMEI no. This is results in no network detection by your phone. U can come to know you have lost your IMEI by checking Settings->About phone->Phone information. There under IMEI section you won’t be finding your mobile IMEI numbers displayed.
Don’t worry you can restore your IMEI’s. Just follow this guide and you will be able to restore your IMEI.
REQUIREMENTS:
-Need some files provided in downloads
-Patience
-Working brain
INSTRUCTIONS
1.Download required files from downloads & extract the zip.
2.Open download tool and choose required files.
3.Load the scatter-file found in the provided file.. select preloader only..but don't flash it.
4. Click Alt + Ctrl + V to activate advanced mode in sp flash tool.
5.Click on "window" up there and select "write mode"
6. Change the Begin address to "0x380000" and click on "file path" and choose the nvram.img from extracted provided zip file
7. Click on "write Memeory", then Power off your device and remove the battery.. press and hold vol- button, then connect phone to pc via USB cable.. press &hold vol- key until pc detect...wait for Write memory ok window appears.
8.Now power on your device.
9.CONGRATULATIONS!! Now IMEI is restored successfully.
<<IMAGE INSTRUCTIONS AVILABLE>>
____ENJOY____
DOWNLOADS:
IMEI fix tool
CREDITS:
-It's my own work to fix IMEI all credits goes to ME
-If u like my work hit thanks button
Click to expand...
Click to collapse
I almost tried everything but none of them worked:crying:

It can't detect my phone before the format+download step my phone bricked so I install the stock ROM and tried to repair imei but it still didn't working bro help me :crying::crying:
---------- Post added at 11:53 AM ---------- Previous post was at 11:51 AM ----------
ChinmayDalal said:
No dude it isn't working..
There was no error in sp flash tool, stilll my IMEI is 0000000000
I should mention that i had once used format all+ download to fix my bootloop (wrote about it earlier).
---------- Post added at 06:05 PM ---------- Previous post was at 06:03 PM ----------
Can I try flashing the image in twrp?
Now I won't do anything without asking
EDIT: yes, it is working now. Had to run that echo command again, with a modification in the path : it is dev/radio/pttycmd1
Thanks a lot , dude
You the man:highfive:
Click to expand...
Click to collapse
How did you did it pls tell me I have same problem pls pls

Pramzcthapa said:
I almost tried everything but none of them worked:crying:
Click to expand...
Click to collapse
Guide updated...so try this method

ChinmayDalal said:
This post (the updated one) gives a permanent solution.
However, if it doesn't work, then search Google for ' repair IMEI using terminal'. In that method, replace /dev/block with /dev/radio.
But if you follow my method, you will sometimes lose IMEI after a reboot, which is fixed by rebooting again. That's why, try @shr!pad's method first.
Hope it helps
Click to expand...
Click to collapse
Pls describe you're method bro my imei is failed you're terminal method

ChinmayDalal said:
See the screenshot.
But instead of writing /dev/pttycmd1, write /dev/radio/pttycmd1
Hit thanks if it helped
Click to expand...
Click to collapse
Tried but failed IMEI 000000000000000
and showing 1 IMEI number my phone model is Moto C plus pls help me

Shepotter# said:
Pls describe you're method bro my imei is failed you're terminal method
Click to expand...
Click to collapse
Try, i mentioned method in post...i should works 100%..

Shepotter# said:
Tried but failed IMEI 000000000000000
and showing 1 IMEI number my phone model is Moto C plus pls help me
Click to expand...
Click to collapse
Correctly follow the guide... Dont skip any step...it should works

hey，can.....videos？

give me the old nvram.img
give me the old nvram.img method urgently please

Shepotter# said:
Pls describe you're method bro my imei is failed you're terminal method
Click to expand...
Click to collapse
IF TERMINAL method not worked,, follow guide and read once from first,,
for that u need stock rom firmware,, u can get here
https://drive.google.com/uc?id=1hcfp1j-yzhXqcV9yoNQwVDsHecRpACH0&export=download

shr!pad said:
IMEI Repair Solution for Moto C Plus XT1721​
A common problem many face in their phone is loss of IMEI no. This is results in no network detection by your phone. U can come to know you have lost your IMEI by checking Settings->About phone->Phone information. There under IMEI section you won’t be finding your mobile IMEI numbers displayed.
Don’t worry you can restore your IMEI’s. Just follow this guide and you will be able to restore your IMEI.
Code:
Exclusive method for fix null IMEI or restore IMEI on Moto C Plus xt1721 only
REQUIREMENTS:
-Need some files
-Patience
-Working brain
INSTRUCTIONS ​
1. First flash Moto C Plus stock rom..choose Format+download on Sp tool
2. Download MauiMETA_exe and install the tool
3. Download Mtk_CDC driver and install it. this is very important driver for MauiMETA tool if u have already just skip this step.
4. Run MauiMETA tool, click on Reconnect
5. Switch off your phone and connect through USB, without press any button.( U need to first power off and remove battery and insert the battery then connect to USB, pls dont press any buttons while connecting phone)
6. Wait for MauiMETA tool detect the phone.((connect phone via USB, wait windows 2nd beep of driver detection.,now keep pressing vol- key ,,it should detect,, try this if automatically not detected))
7. Next, select IMEI download, then click change nvram database,,select the proper data base from stock rom or from HERE.
8. Next write both (SIM1 & SIM2) Original IMEI. OR click on load from file download file from HERE.
9. Next hit download to target.
10. Aand wait,, if it shows error window, just ignore that , disconnect USB and power on the device.
11. NOw check IMEI by *#06# ,and see u got both IMEI,,`:good:
<<IMAGE INSTRUCTIONS AVILABLE>>​
____ENJOY____ ​
CREDITS:
-It's my own work to fix IMEI all credits goes to shr!pad
-Thanks for MauiMETA Tools
If u feel this Tutorial is helpful hit thanks button​
Click to expand...
Click to collapse
Hi sir,i tried this method but it showed failure(cannot find the kernel USB compost for AP and Modem handshake) and i even tried SN Writer that also got stuck on searching kernel com port and hankshake..
i have installed the cdc drivers.
and i have got TWRP on my phone with stock rom
so should i unroot my phone for this method
and also i have seen on YT that there is another method by using sp tools,flashing nvram.bin.
so sir i was wondering if you can send me your nvram.bin file and somehow i could modify it and add my Imei/wifi add./BT add. to it and flash the modified nvram.bin on my phone[is that possible ?]

[email protected]@k said:
Hi sir,i tried this method but it showed failure(cannot find the kernel USB compost for AP and Modem handshake) and i even tried SN Writer that also got stuck on searching kernel com port and hankshake..
i have installed the cdc drivers.
and i have got TWRP on my phone with stock rom
so should i unroot my phone for this method
and also i have seen on YT that there is another method by using sp tools,flashing nvram.bin.
so sir i was wondering if you can send me your nvram.bin file and somehow i could modify it and add my Imei/wifi add./BT add. to it and flash the modified nvram.bin on my phone[is that possible ?]
Click to expand...
Click to collapse
this guide for only stock rom means stock recovery, and no patches to boot.img... u should flash stock rom before this method. [fresh stock rom needed]
sp-flash tool method dont work's on moto c plus(nvram.bin).. sn-writer also dont work's.

shr!pad said:
IMEI Repair Solution for Moto C Plus XT1721​
A common problem many face in their phone is loss of IMEI no. This is results in no network detection by your phone. U can come to know you have lost your IMEI by checking Settings->About phone->Phone information. There under IMEI section you won’t be finding your mobile IMEI numbers displayed.
Don’t worry you can restore your IMEI’s. Just follow this guide and you will be able to restore your IMEI.
Code:
Exclusive method for fix null IMEI or restore IMEI on Moto C Plus xt1721 only
REQUIREMENTS:
-Need some files
-Patience
-Working brain
INSTRUCTIONS ​
1. First flash Moto C Plus stock rom..choose Format+download on Sp tool
2. Download MauiMETA_exe and install the tool
3. Download Mtk_CDC driver and install it. this is very important driver for MauiMETA tool if u have already just skip this step.
4. Run MauiMETA tool, click on Reconnect
5. Switch off your phone and connect through USB, without press any button.( U need to first power off and remove battery and insert the battery then connect to USB, pls dont press any buttons while connecting phone)
6. Wait for MauiMETA tool detect the phone.((connect phone via USB, wait windows 2nd beep of driver detection.,now keep pressing vol- key ,,it should detect,, try this if automatically not detected))
7. Next, select IMEI download, then click change nvram database,,select the proper data base from stock rom or from HERE.
8. Next write both (SIM1 & SIM2) Original IMEI. OR click on load from file download file from HERE.
9. Next hit download to target.
10. Aand wait,, if it shows error window, just ignore that , disconnect USB and power on the device.
11. NOw check IMEI by *#06# ,and see u got both IMEI,,`:good:
<<IMAGE INSTRUCTIONS AVILABLE>>​
____ENJOY____ ​
CREDITS:
-It's my own work to fix IMEI all credits goes to shr!pad
-Thanks for MauiMETA Tools
If u feel this Tutorial is helpful hit thanks button​
Click to expand...
Click to collapse
THANK YOU VERY VERY MUCH... You are the great man abd XDA is my first and best forum..
Thanks a lot Mr shr!pad... allah bless you.. good and good and good is sda...
This method simply resolve my pblm... doogee X9 S (pro). your guide is simple and clear but precis. merci beaucoup
شكرا جزيلا
و الشكر موصول ل xda
You are tha best in all the world.

ferryel said:
THANK YOU VERY VERY MUCH... You are the great man abd XDA is my first and best forum..
Thanks a lot Mr shr!pad... allah bless you.. good and good and good is sda...
This method simply resolve my pblm... doogee X9 S (pro). your guide is simple and clear but precis. merci beaucoup
شكرا جزيلا
و الشكر موصول ل xda
You are tha best in all the world.
Click to expand...
Click to collapse
thank you :highfive:

shr!pad said:
IMEI Repair Solution for Moto C Plus XT1721​
A common problem many face in their phone is loss of IMEI no. This is results in no network detection by your phone. U can come to know you have lost your IMEI by checking Settings->About phone->Phone information. There under IMEI section you won’t be finding your mobile IMEI numbers displayed.
Don’t worry you can restore your IMEI’s. Just follow this guide and you will be able to restore your IMEI.
Code:
Exclusive method for fix null IMEI or restore IMEI on Moto C Plus xt1721 only
REQUIREMENTS:
-Need some files
-Patience
-Working brain
INSTRUCTIONS ​
1. First flash Moto C Plus stock rom..choose Format+download on Sp tool
2. Download MauiMETA_exe and install the tool
3. Download Mtk_CDC driver and install it. this is very important driver for MauiMETA tool if u have already just skip this step.
4. Run MauiMETA tool, click on Reconnect
5. Switch off your phone and connect through USB, without press any button.( U need to first power off and remove battery and insert the battery then connect to USB, pls dont press any buttons while connecting phone)
6. Wait for MauiMETA tool detect the phone.((connect phone via USB, wait windows 2nd beep of driver detection.,now keep pressing vol- key ,,it should detect,, try this if automatically not detected))
7. Next, select IMEI download, then click change nvram database,,select the proper data base from stock rom or from HERE.
8. Next write both (SIM1 & SIM2) Original IMEI. OR click on load from file download file from HERE.
9. Next hit download to target.
10. Aand wait,, if it shows error window, just ignore that , disconnect USB and power on the device.
11. NOw check IMEI by *#06# ,and see u got both IMEI,,`:good:
<<IMAGE INSTRUCTIONS AVILABLE>>​
____ENJOY____ ​
CREDITS:
-It's my own work to fix IMEI all credits goes to shr!pad
-Thanks for MauiMETA Tools
If u feel this Tutorial is helpful hit thanks button​
Click to expand...
Click to collapse
will this work for moto c?
my device is stuck at 000000000000000 imei help....
my device is xt1755 and shows mt6737m in sp flash tool.

AdwayPratap said:
will this work for moto c?
my device is stuck at 000000000000000 imei help....
my device is xt1755 and shows mt6737m in sp flash tool.
Click to expand...
Click to collapse
Yes same method follow for moto c , but 1 thing remember , i given moto c plus "Modem database", just choose your device "Modem Database" file that's all,, same method will work,, Good luck,
thank you.

shr!pad said:
Yes same method follow for moto c , but 1 thing remember , i given moto c plus "Modem database", just choose your device "Modem Database" file that's all,, same method will work,, Good luck,
thank you.
Click to expand...
Click to collapse
I tried everything in your tutorial and have mtk drivers installed but I skipped the mtk CDC drivers because I can flash in sp flash tool, no problem in my device detection....
When I write imei and download to flash it says download to flash successfully ...
Still the imei is the same.
Please help me get the imei back.
Any sort of help will be appreciated....

[TOOL] MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)

You can use it to revive your op6, if you can boot in fastboot and have done the stuff with drivers (qualcomm)
MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)
May 2018 Android patches
https://mega.nz/#F!CfBG0IgZ!Gmnu6B-a7yFyvMLNw_pz8w
https://www.androidfilehost.com/?fid=746163614322268729
Guide how to revive your op6:
First of all, you need to access to fastboot mode, if you can't , contact Oneplus support, then have a windows computer and download these file and drivers qualcomm ( https://androidfilehost.com/?fid=24052804347798730) and extract in one folder.
After you have all the file ready, plug in the phone to the computer, go in device manager and under port (COM) disinstall qualcomm one (oneplus 6) and then unplug.
Now you have to go in Windows test mode to not let him install default drivers, so:
windows key (on keyboard) + X, windows powershell (or normal prompt) administrator and write and enter: bcdedit /set testsigning on ( you will repeat the same process with "off" to stop the test mode after you will finish to do all the things).
Reboot the system and you could see in bottom right corner the test mode, now you are ready to install properly drivers.
Power off the phone, then hold for 5 seconds vol up and plug the usb to computer. Now you have to see US8_BULK as new device connected and you can also see in device manager; if you can't notice it, repeat the process until you see it (power on, power off, hold...) there is a full youtube guide for op5 and it's the same process (https://www.youtube.com/watch?v=PpLvmID1wdI)
Right click con US8_BULK in device manager and update drivers by system files (go to the folder's drivers you had extracted before).
Now you should see qualcomm drivers under port (COM).
You are ready to let the tool to do all the stuff, so let plugged the phone, always powered off, right click on msmdownloadtool and execute as administrator.
You should see your device and click start to begin the process; if it gives you some error (like sahara or something else), unplug, power on, power off and the plug it again, now it should be fine.
And that's it, the tool will do all the work and, at the end, you will have like a brand new phone ready to a new setup.
EDIT: if you are stucked in bootloader, you have only to power off and continue with the part: ... hold for 5 seconds vol up... (it happened in page 4)
Please, consider to donate me something for the work and the risk (maybe idk). Thanks
https://www.paypal.me/Imadalek
Only BTC: 3P5PnpTLpfRp2LWTfh8AkL7GCU1kAGxvM4
Only ETH: 0xE3F462A1aC3dBa8bEc3179535C0b6688d9D13106
Only LTC: MGwHMU4qEB6pRX7apQEBYkUrm1iL7Sa2NY
(Thanks to @nytebird for the contribution)
If you want to buy another Oneplus 6, this is my referral to have 20€/$ discount on accessory:
https://www.oneplus.com/it/invite#2CQD9VHNXPFA2B

Awesome saw u on r/OnePlus telegram
How did you get these files?

Could be from phonandroid, since the tool is there for download since 5 days .

MickyFoley said:
Could be from phonandroid, since the tool is there for download since 5 days .
Click to expand...
Click to collapse
The international one? Are you sure? I have found only the chinese that puts Hydrogen OS restoring

OnePlus telegram? Someone pm me the link

Thanks for the tool :good::good:
Can someone upload it in any other site. I am unable to download. :crying:

anthonythangaraj said:
Thanks for the tool :good::good:
Can someone upload it in any other site. I am unable to download. :crying:
Click to expand...
Click to collapse
Check Desktop Site box in your browser.

Plz mirror the link .

hello would it be possible to have the same thing with the update 5.1.3 thanks in advance

lerieur said:
hello would it be possible to have the same thing with the update 5.1.3 thanks in advance
Click to expand...
Click to collapse
No way; the techs come to you with this

Pls reply anyone who tried this to restore op6. Proper files also pls link for proper guide

mirror plzz

Panssee said:
mirror plzz
Click to expand...
Click to collapse
I'm trying to get developer permission to android file host

milav said:
Pls reply anyone who tried this to restore op6. Proper files also pls link for proper guide
Click to expand...
Click to collapse
I will edit first post to explain all in detail

milav said:
Pls reply anyone who tried this to restore op6. Proper files also pls link for proper guide
Click to expand...
Click to collapse
done

Easiest way is to be in system and turn on adb debugging and run adb reboot edl then go about the install

joemossjr said:
Easiest way is to be in system and turn on adb debugging and run adb reboot edl then go about the install
Click to expand...
Click to collapse
If you have system access, there is no point to use this tool/guide I was able only to boot in fastboot

Test with 128 GB version about 10-15 minutes (with already installed drivers): OK
It runs like a new shipped OP6.

Fivegates said:
If you have system access, there is no point to use this tool/guide I was able only to boot in fastboot
Click to expand...
Click to collapse
Lol oh yeah

Qualcomm tool is not for fastboot or recovery mode, but for qualcomm drivers mode (USB to serial port).
So if you can boot to recovery or fastboot, probably don't need this pack.

Revive of DEAD HONOR 9! (HARDBRICK) (NO TURN ON/CONNECT USB) - SOLUTION!!. (PICTURES)

Hello,
I finaly found out a method how to establish USB-Connection with a "dead" honor 9 (wasn't recognized by computer/didn't turn on/just nothing).
WARNING!! YOUR warranty will be lost IF YOU OPEN HONOR 9!, no guarantee you get anything fixed/Maybe you break more!!
So I show you how I did it:
1: Open the Honor 9 Back: Tutorialvideo (not made by me)
https://www.youtube.com/watch?v=SUI5sA99nDw
- I used Hair Dryer + Knife to open the back. But use the tools in this video if you have.
2: - Install right USB-Drivers.: I needet the drivers "ASC-Driver_Handset WinDriver 2.01.00.00.exe" - You can find them in google!
3. - Connect the 2 Test Points like in my images. I used the SIM-Card tool from the phone to do it.
4. - Connect phone via USB - if everything gone right it shows up in the device manager as "HUAWEI USB COM 1.0"
5. - NOW We need an app or method to flash FirmWare in this mode... actually not supported by DC-Phoenix.... If any solution I edit in the thread.
6. UPDATE UPDATE! PHONE GOT REVIVED READ SECOND POST!

UPDATE UPDATE !
- HONOR 9 REVIVED FROM THE DEAD
- Downloaded DC-PHOENIX (dc-unlocker.com) ->Made Account/Charged Credits
- Connect the Phone via Testpoints, than open DC-Phoenix APP
- Flashed ( Stanford-AL10_STFAL00S001028_Board Software_general_Android 7.0_EMUI5.1_05022CLB ) ->You can find it in DC-Phoenix search.
-> Phone got revived. (NO MORE Huaway boot animation - I got strange red and green colors instead)
-> Open H9 in Fastboot mode (Turn phone off than: VOL+Down + USB CABLE PUT IN)
-> OPEN DC-PHOENIX
-> FLASHED "Stanford-L09_C432B130_Firmware_Belgium_Germany_France_Netherlands_Portugal_Switzerland_Spain_Italy_Austria_Poland_Denmark_Finland_Czech_Republic_Hungary.APP" with DC-Phoenix.
[UPDATE 2}
- You have to restore IMEI/SN/CARRIER AND COUNTRY AFTER UPDATING (empty board) with HCU Client - (You can find the software on dc-unlocker.com)
- THAN INSERT SIM CARD TO GET OFFICIAL OTA UPDATES.
-> 100% back to stock with full OTA, everything working, boot animation also back

What could be the reason of those death ? planned obsolescence ? Virus ? just HW problem / quality ? no luck ? ........

sonneper said:
What could be the reason of those death ? planned obsolescence ? Virus ? just HW problem / quality ? no luck ? ........
Click to expand...
Click to collapse
Failure in playing and experimenting with the Software.

ok , nevermind, you manage it ! good play : ) !

yz8_1337 said:
Do you also think this works with mine which bootloops after downgrading from Oreo to Nougat?
Click to expand...
Click to collapse
This should work with all damaged Smarpthones but I also think there are better and much softer techniques to revive looping or software side errors where the phone still turns on.
Maybe try via fastboot mode? But no OT please there are enough threads for it bro.
Revive via testpoints should always be the last option to revive a phone.

I tried this and doesnt work for me, it doesnt even show up as unknown device in device manager.
does anyone know why or is my phone completely dead?

SusKuN1337 said:
I tried this and doesnt work for me, it doesnt even show up as unknown device in device manager.
does anyone know why or is my phone completely dead?
Click to expand...
Click to collapse
Maybe wrong drivers installed, maybe you didn't connect the testpoints right (I also needet much tries)

4r44444 said:
Maybe wrong drivers installed, maybe you didn't connect the testpoints right (I also needet much tries)
Click to expand...
Click to collapse
i got told yesterday that the motherboard is broken, so, rest in peace honor 9 :<

I updated my phone with HuRUpdater and no my phone won't turn on. I wanted to locate the ASC-Driver_Handset WinDriver 2.01.00.00.exe, but all of the links are false download links. Can someone point me to a valid link for the driver? Thanks!

Rapid81 said:
I updated my phone with HuRUpdater and no my phone won't turn on
Click to expand...
Click to collapse
Did you save your recovery.log in TWRP after you flashed with HuRUpdater ?
Update from Build to which build ?
On which cust region ?
Rapid81 said:
I wanted to locate the ASC-Driver_Handset WinDriver 2.01.00.00.exe, but all of the links are false download links. Can someone point me to a valid link for the driver? Thanks!
Click to expand...
Click to collapse
Here is ASC-Driver_Handset WinDriver 2.01.02.00.exe :
HUAWEI DRIVER HANDSET PRODUCTLINE 2.01.02.00
https://androidhost.ru/6rf
Please tell us back your experience flashing board software.

oslo83 said:
Did you save your recovery.log in TWRP after you flashed with HuRUpdater ?
Update from Build to which build ?
On which cust region ?
Here is ASC-Driver_Handset WinDriver 2.01.02.00.exe :
HUAWEI DRIVER HANDSET PRODUCTLINE 2.01.02.00
https://androidhost.ru/6rf
Please tell us back your experience flashing board software.
Click to expand...
Click to collapse
No, I did not saved the log. The update went well, no error or any difference. I updated my phone with HuRUpdater several times without problem.
I updated to STF-L09C432B376, but I had problems with that firmware and I went back to B371, as I did before, when I had issues with B374 as well.
Everything went well, and after B371, I installed Magisk v17, like always, pressed the reboot button and since that, the phone won't turn on.
Thanks for the link!

@Rapid81
As you're stating that after installing the driver, the WIndows sees the phone as "HUAWEI USB COM 1.0" :
So you're good to go, then no need for you to open up your device loonking for test points
---------- Post added at 16:28 ---------- Previous post was at 16:19 ----------
Let's chat via PM as I think I have some tools to replace DC-Phoenix tools which is a license-only. I'd like you to test.
I also liled to know how you managed to get COM1 without openphone and connecting testpoints...

oslo83 said:
@Rapid81
As you're stating that after installing the driver, the WIndows sees the phone as "HUAWEI USB COM 1.0" :
So you're good to go, then no need for you to open up your device loonking for test points
---------- Post added at 16:28 ---------- Previous post was at 16:19 ----------
Let's chat via PM as I think I have some tools to replace DC-Phoenix tools which is a license-only. I'd like you to test.
I also liled to know how you managed to get COM1 without openphone and connecting testpoints...
Click to expand...
Click to collapse
I just installed the mentioned driver, connected the phone and the "HUAWEI USB COM 1.0" showed up.
I wrote back to you.

DC-Phoenix give me an error when writing bootloader. I have a brick now.

Rapid81 said:
DC-Phoenix give me an error when writing bootloader. I have a brick now.
Click to expand...
Click to collapse
Have you tried to physically connect test point?
---------- Post added at 02:35 PM ---------- Previous post was at 02:33 PM ----------
4r44444 said:
Maybe wrong drivers installed, maybe you didn't connect the testpoints right (I also needet much tries)
Click to expand...
Click to collapse
Flashed ( Stanford-AL10_STFAL00S001028_Board Software_general_Android 7.0_EMUI5.1_05022CLB ) ->You can find it in DC-Phoenix search.
What's it mean? Use what to Flash?

Ccboxes said:
Have you tried to physically connect test point?
Click to expand...
Click to collapse
Yes, several times, with method was 100% worked. The main board died.

Rapid81 is getting its bricked STF honor9 seen as COM3 by windows.
He said he changed it in windows settings to COM1.
But both times it didn't worked with DC-Phoenix or IDT...
Maybe he did not managed something...

oslo83 said:
Rapid81 is getting its bricked STF honor9 seen as COM3 by windows.
He said he changed it in windows settings to COM1.
But both times it didn't worked with DC-Phoenix or IDT...
Maybe he did not managed something...
Click to expand...
Click to collapse
Could you give the IDT and frimware to me？I want to try before DC.

Ccboxes said:
Could you give the IDT and frimware to me？I want to try before DC.
Click to expand...
Click to collapse
IDT 2.0.0.9
https://bi-t.xyz/ozS5cy2kTm
---------- Post added at 06:40 ---------- Previous post was at 06:34 ----------
IDT shoud work with with original BoardSoftware not repacked like DC-unlocker's .dgtks .