Yes I'm rooted and everything but whenever i try i bootloops and i have to flash the uninstaller. Has anyone else had any luck and if the regular expose doesn't work will systemless work? Also I'm using the cricket version if that means anything.
I'm using cricket 6045O, currently on SPB 2.1 and I'm currently rooted and flashed xposed no issues here. What version of xposed are you using and what mm rom are you on?
Yep, currently working for me.
I've flashed lastest SuperSU - (2.76) through TWRP, then installed material xposed and flashed the 64-bit arm zip that it downloads.
Related
Hi There,
I have come close to getting Xposed framework to work on my Canadian variant of the LG Stylo LG-H636.
As there is no custom recovery and I'm not sure about bootloader unlocking, but with no custom recovery it made the process a bit more annoying.
I started by rooting with kingroot, then used a guide to show me how to switch from king user to Superuser because in order to flash Xposed framework I need Flashfire, and in order to use Flashfire I need to be using SuperSU.
So after switching it to SuperSU Binary I registered and installed the Flashfire app.
This is where I am having problems; I don't know what Xposed Framework to use for my LG-H636. There are download options on the Xposed download page that are for my Android L 5.0.2. So I downloaded x86, and ARM, and ARM64, I tried them all by flashing with Flashfire but Still can't get Xposed framework running.
I get the error that Xposed framework is not installed when I go to the app and download a module.
Flashfire seems to say "Done!" after the ARM version is flashed, but not with the others. It just says "Flashing..." and ..."rebooting". I still don't know what one to use. Anyone know the proper Xposed to use?
I thought I was getting close to having some fun on this phone, whereas before I tried all this I only had the option of stock and root.
Question; does anyone out there know the proper Xposed Framework I should be using? I think I've tried them all and still not working. Is there an easier way to get GravityBox LP working? That's actually why I started doing all this!
I'm running Android L 5.0.2, rooted with King Root and switched to SuperSU, flashing Xposed Framework ZIP with Flashfire.
Thanks a bunch!
Hi guys, after a long time out i've come back to XDA and installed COS13 (S2JK release).
I rooted my OnePlus One with SuperSU v. 2.65 (stable) then i downloaded and flashed xposed-v84-sdk23-arm.zip, then installed the XposedInstaller_3.0_alpha4.apk.
But when i tried to activate Xposed i got the infamous "xposed not yet compatible with SDK 23 or your processor architecture (armeabi-v7a)" error.
After some reading here and there, i found out that ppl is still fine with Xposed v.80, so i installed everything again...and i got the same error. I also tried to install supersu v 2.68 burt to no avail.
What's wrong with that? Isn't COS13 supposed to work with Xposed?
Can anyone point me out in the right direction?
Thanx in advance
i dont know how to solve your problem but I have xposed-v84-sdk23-arm working perfectly on a clean flash of COS 13 from the official full zip from cyanogen. Using supersu 2.65 stable
ben.k said:
i dont know how to solve your problem but I have xposed-v84-sdk23-arm working perfectly on a clean flash of COS 13 from the official full zip from cyanogen. Using supersu 2.65 stable
Click to expand...
Click to collapse
Thank you for confirming that it works....now that really bothers me.
Why do i get that error? I have a fresh clean COS13..
As far as i know, Xposed should work fine in selinux enforced mode..but just to make sure...are you in enforced mode?
P.S. Should i first install the app and THEN flash the framework? Does that make any difference?
Vonnegut said:
Thank you for confirming that it works....now that really bothers me.
Why do i get that error? I have a fresh clean COS13..
As far as i know, Xposed should work fine in selinux enforced mode..but just to make sure...are you in enforced mode?
P.S. Should i first install the app and THEN flash the framework? Does that make any difference?
Click to expand...
Click to collapse
xposed working fine for me, I'm using cos 13 latest rom,
Rooted
Xposed
Custom kernel
All working fine
Ok, i solved the problem...i'm a moron. I put both the kitkat and the marshmellow Xpsed apk inside the same folder...and guess which one i installed on marshmellow? LOL!
I just got my Xperia Z5 (E6603) and when I installed Xposed I got boot loops. I managed to fix this by removing xposed.
My phone has unlocked bootloader, is rooted and has TWRP. I'm running android 6.0.1 and androplus kernel 3.10.84-v31 on a stock rom 32.2.A.0.253
There is any version of Xposed that won't result in a bootloop? I've already tried version 83,85 and 87...
I'm running the 86 version, and I never had any issue
Which kernel and firmware version you're using? Stock rom? Could you send me the kernel you're using please?
ffp. said:
Which kernel and firmware version you're using? Stock rom? Could you send me the kernel you're using please?
Click to expand...
Click to collapse
I'm using the following and Xposed is working without issue on 32.2.A.0.305 for the E6653:
AndroPlus v41 - v41 should work with your firmware as well.
Material Design Xposed Installer - provides many more options for installing Xposed.
Systemless Xposed - you can flash this right from within the Material Design Xposed Installer I linked to above.
Thank you very much for answering. It seems the problem was some module or maybe a bad restore, since I restored the modules from a titanium backup. I deleted all modules and xposed and resintalled again from scratch and it worked.
Now I'm with the latest firmware, xposed and kernel and everything is working ok.
Have you installed official Xposed for Nougat?
Does it work fine on your MotoZ?
Any performance issues/lags?
Please add details on your ROM version, root method and if you have Magisk installed too or not...
Thank you.
I have this rom
Android Nougat on Moto Z (All Unlocked Versions) and rooted in the way that post says.
Installed xposed OK via TWRP, modules are correctly checked and enabled but didn't work, for example greenify didn't recognize that xposed is installed so didn't show the option.
Now I have missed data connection so am going to reinstall the same rom on the dirty way to not lose data and reinstall everything.
lilloscar said:
I have this rom
Android Nougat on Moto Z (All Unlocked Versions) and rooted in the way that post says.
Installed xposed OK via TWRP, modules are correctly checked and enabled but didn't work, for example greenify didn't recognize that xposed is installed so didn't show the option.
Now I have missed data connection so am going to reinstall the same rom on the dirty way to not lose data and reinstall everything.
Click to expand...
Click to collapse
Two things...
- Greenify needs to fix its compatibility with Nougat, it's a known bug
- It is *needed* to use new official Xposed apk v.3.1.2 to manage modules activation. I've seen that unofficial or old version aren't able to enable them properly...
Thanks I have just read that about greenify, the list of compatible modules with nougat is short at this time guess so
Sent from my XT1650 using Tapatalk
Mine doesn't boot with xposed installed.
Stock 7.1.1 with turboZ and magisk
I remember that installing magisk caused a bootloop on my stock 7.0
I had forgotten what modifications I did to my 7.0 stock (retus), trying to flash Xposed on it prevented it from booting (probably because of verity-dm) so I restarted from scratch.
1) Downloaded 7.1.1 stock from here and flashed it. Downloaded and installed 2 OTAs from system updates then.
2) Flashed latest TWRP (3.1.1-0).
3) I've read various reports of latest Magisk not working on Moto Z. Gave it a try though. Flashed Magisk v14.0, everything went well and I got back root access.
4) Tried installing systemless Xposed, however install failed from Magisk Manager, flashing the zip succeeded in recovery but Xposed wasn't recognized after reboot.
5) So I flashed classic Xposed (arm64) following these instructions, everything went fine (after one very long reboot).
Hi my fried. How long time this reboot in minuts?
Thanks
Ano59 said:
I had forgotten what modifications I did to my 7.0 stock (retus), trying to flash Xposed on it prevented it from booting (probably because of verity-dm) so I restarted from scratch.
1) Downloaded 7.1.1 stock from here and flashed it. Downloaded and installed 2 OTAs from system updates then.
2) Flashed latest TWRP (3.1.1-0).
3) I've read various reports of latest Magisk not working on Moto Z. Gave it a try though. Flashed Magisk v14.0, everything went well and I got back root access.
4) Tried installing systemless Xposed, however install failed from Magisk Manager, flashing the zip succeeded in recovery but Xposed wasn't recognized after reboot.
5) So I flashed classic Xposed (arm64) following these instructions, everything went fine (after one very long reboot).
Click to expand...
Click to collapse
josenilsantana said:
Hi my fried. How long time this reboot in minuts?
Thanks
Click to expand...
Click to collapse
It took maybe 15-20 minutes for the first reboot.
For me systemless Xposed install e worked properly too.
Ano59 said:
It took maybe 15-20 minutes for the first reboot.
Click to expand...
Click to collapse
I've rooted my OP6 with Magisk and I'd like to get Gravitybox but idk if it's safe to try to install XPosed using this https://www.xda-developers.com/xposed-framework-for-android-oreo-beta/. Has anybody tried it or have any information on this? Thanks.
TeeDiddyDizzle said:
I've rooted my OP6 with Magisk and I'd like to get Gravitybox but idk if it's safe to try to install XPosed using this https://www.xda-developers.com/xposed-framework-for-android-oreo-beta/. Has anybody tried it or have any information on this? Thanks.
Click to expand...
Click to collapse
First, make sure you can reflash your device back to stock (either by flashing full ROM or restoring from TWRP) if anything goes wrong.
Install XposedInstaller_3.1.5.apk from this thread: https://forum.xda-developers.com/showthread.php?t=3034811
You can then run the app and it will allow you to download and install proper Xposed Framework for your device.
Xposed Framework Oreo is still in beta, but my experience is that everything seems to be working just fine on my OP3T running OOS Beta.
Not sure what changes OOS on OP6 has compared to other OP devices so there is a certain probability that it might be incompatible.
Note, that GravityBox is not fully compatible with OOS running on OP6 (some of the features, like e.g. those navbar related, might not work as expected).