Hi guys, after a long time out i've come back to XDA and installed COS13 (S2JK release).
I rooted my OnePlus One with SuperSU v. 2.65 (stable) then i downloaded and flashed xposed-v84-sdk23-arm.zip, then installed the XposedInstaller_3.0_alpha4.apk.
But when i tried to activate Xposed i got the infamous "xposed not yet compatible with SDK 23 or your processor architecture (armeabi-v7a)" error.
After some reading here and there, i found out that ppl is still fine with Xposed v.80, so i installed everything again...and i got the same error. I also tried to install supersu v 2.68 burt to no avail.
What's wrong with that? Isn't COS13 supposed to work with Xposed?
Can anyone point me out in the right direction?
Thanx in advance
i dont know how to solve your problem but I have xposed-v84-sdk23-arm working perfectly on a clean flash of COS 13 from the official full zip from cyanogen. Using supersu 2.65 stable
ben.k said:
i dont know how to solve your problem but I have xposed-v84-sdk23-arm working perfectly on a clean flash of COS 13 from the official full zip from cyanogen. Using supersu 2.65 stable
Click to expand...
Click to collapse
Thank you for confirming that it works....now that really bothers me.
Why do i get that error? I have a fresh clean COS13..
As far as i know, Xposed should work fine in selinux enforced mode..but just to make sure...are you in enforced mode?
P.S. Should i first install the app and THEN flash the framework? Does that make any difference?
Vonnegut said:
Thank you for confirming that it works....now that really bothers me.
Why do i get that error? I have a fresh clean COS13..
As far as i know, Xposed should work fine in selinux enforced mode..but just to make sure...are you in enforced mode?
P.S. Should i first install the app and THEN flash the framework? Does that make any difference?
Click to expand...
Click to collapse
xposed working fine for me, I'm using cos 13 latest rom,
Rooted
Xposed
Custom kernel
All working fine
Ok, i solved the problem...i'm a moron. I put both the kitkat and the marshmellow Xpsed apk inside the same folder...and guess which one i installed on marshmellow? LOL!
Related
Hello, I feel like install xposed on my phone , i have been using stock 5.1 optimized without any problem. are you using xposed ? are any problem install xposed on optmized rom? thanks you
And.. how can I install it ? because one time ago I installed and i had got a bootloope and i had to made wipes, and this is the problem. I dont want make or reflash nothing. I have to install 3 files no?
I don't personally install Xposed Framework anymore, but many people use it successfully with Stock Android 5.1 and Stock Android 6.0.
Hopefully someone with direct experience can suggest an install method.
Install this:
http://forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758
It will automatically select the correct version and manage the modules
maurit43 said:
Hello, I feel like install xposed on my phone , i have been using stock 5.1 optimized without any problem. are you using xposed ? are any problem install xposed on optmized rom? thanks you
And.. how can I install it ? because one time ago I installed and i had got a bootloope and i had to made wipes, and this is the problem. I dont want make or reflash nothing. I have to install 3 files no?
Click to expand...
Click to collapse
If you would like to know which version to install it is
xposed-v82-sdk22-arm. Install this zip in recovery.
http://dl-xda.xposed.info/framework/sdk22/arm/xposed-v82-sdk22-arm.zip
The following DL link is the apk which you can install after booting. http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
Yes I'm rooted and everything but whenever i try i bootloops and i have to flash the uninstaller. Has anyone else had any luck and if the regular expose doesn't work will systemless work? Also I'm using the cricket version if that means anything.
I'm using cricket 6045O, currently on SPB 2.1 and I'm currently rooted and flashed xposed no issues here. What version of xposed are you using and what mm rom are you on?
Yep, currently working for me.
I've flashed lastest SuperSU - (2.76) through TWRP, then installed material xposed and flashed the 64-bit arm zip that it downloads.
Anyone got Viper to work on latest Magisk?
None of them install the driver and does anything soundwise, even you can turn the effects on.
I believe It's because it requires new magisk template. Give developers some time to update.
working absolutely fine here on latest FreedomOS CE, which is based on BETA 19.
MarcTremonti said:
working absolutely fine here on latest FreedomOS CE, which is based on BETA 19.
Click to expand...
Click to collapse
may i ask which module are you using!!! and if you did something after installing it, or just installed via Magisk!
that's said, to OP, this is the wrong forum for the post, there's a questions forums where this will be more appropriate.
theduke7 said:
may i ask which module are you using!!! and if you did something after installing it, or just installed via Magisk!
that's said, to OP, this is the wrong forum for the post, there's a questions forums where this will be more appropriate.
Click to expand...
Click to collapse
Latest freedomOS came with magsik 13 beta, but also this worked.
But i updated magisk manually also to 13.1. installed magisk manager update und flashed magisk13.1.zip. done.
FreedomOS also comes with compatibility modules for Arise, but afaik these are only needed because freedomOS comes with enforcing kernel. And the kernel i use now (bluspark) is also enforcing.
Stock OOS comes with permissive kernel and these modules shouldnt be needed there.
AFAIK, dont quote me on that.
MarcTremonti said:
Latest freedomOS came with magsik 13 beta, but also this worked.
But i updated magisk manually also to 13.1. installed magisk manager update und flashed magisk13.1.zip. done.
FreedomOS also comes with compatibility modules for Arise, but afaik these are only needed because freedomOS comes with enforcing kernel. And the kernel i use now (bluspark) is also enforcing.
Stock OOS comes with permissive kernel and these modules shouldnt be needed there.
AFAIK, dont quote me on that.
Click to expand...
Click to collapse
i;m using Blu_Spark too, so i think my kernel is Enforcing, are these Magisk modules (for freedom) available to download!!!
theduke7 said:
i;m using Blu_Spark too, so i think my kernel is Enforcing, are these Magisk modules (for freedom) available to download!!!
Click to expand...
Click to collapse
Yea bluspark is enforcing. I guess they are on gitlab from freedomOS.(check FOS thread for gitlab link)
But i guess easiest way would be just to flash freedomOS. Its nothing else anyway, than debloated stock ROM with a few tweaks. Everything selectable in aroma to your needs.
Try this...
kokesh said:
Anyone got Viper to work on latest Magisk?
None of them install the driver and does anything soundwise, even you can turn the effects on.
Click to expand...
Click to collapse
You can try this:
Update to the latest Magisk version and get everything set. for example, Snapchat and other apps that you might need to pass safety.
After that, you can downgrade to the V.12.0. And V4A it should work fine.
The only bad thing here is that you can't use Android pay or pass safetynet.
This one is working fine for me with OB19/Magisk13/FCkernel25:
https://forum.xda-developers.com/apps/magisk/module-viper4android-fx-2-5-0-5-t3577058
also with dolby atmos:
https://forum.xda-developers.com/apps/magisk/soundmod-axon-7-dolby-atmos-t3412342
I use the one from ahrion, too. Works fine.
I am 6
Sent from my ONEPLUS A3000 using Tapatalk
siwan05 said:
This one is working fine for me with OB19/Magisk13/FCkernel25:
https://forum.xda-developers.com/apps/magisk/module-viper4android-fx-2-5-0-5-t3577058
also with dolby atmos:
https://forum.xda-developers.com/apps/magisk/soundmod-axon-7-dolby-atmos-t3412342
Click to expand...
Click to collapse
I've tried both. It installs, but once I launch Viper, it asks either for driver install, or shows the driver state as abnormal. Never has any effect on the audio.
hello!
I have an s6 edge (G925F), running on latest global elite ROM 4.1 (nougat 7.0), and I have latest Magisk (16.0).
I want to install Xposed framework, but I'm confused which way is the safest and less bootloop-y to install it.
should I install it systemlessly through Magisk manager [Xposed Framework (SDK 24)]? or should i flash it with twrp from this thread?
i really don't want to brick it or lose anything xD
zinou111 said:
hello!
I have an s6 edge (G925F), running on latest global elite ROM 4.1 (nougat 7.0), and I have latest Magisk (16.0).
I want to install Xposed framework, but I'm confused which way is the safest and less bootloop-y to install it.
should I install it systemlessly through Magisk manager [Xposed Framework (SDK 24)]? or should i flash it with twrp from this thread?
i really don't want to brick it or lose anything xD
Click to expand...
Click to collapse
Both methods work.
I installed using the latest xposed installer apk & then it installed the latest xposed firmware & after a reboot which was quite long (more than 2 minutes), xposed was activated!
Fullmetal Jun said:
Both methods work.
I installed using the latest xposed installer apk & then it installed the latest xposed firmware & after a reboot which was quite long (more than 2 minutes), xposed was activated!
Click to expand...
Click to collapse
okay, thanks!
can u plz tell me the steps to do it? and what should I do in case anything goes wrong?
zinou111 said:
okay, thanks!
can u plz tell me the steps to do it? and what should I do in case anything goes wrong?
Click to expand...
Click to collapse
Install the latest xposed installer apk (non-magisk) from the official thread. Open the app & install the xposed framework & reboot. Reboot will take some time.
Then u can download some modules like GravityBox & activate & reboot to use it
If something goes wrong, idk. I think u have to try to get to twrp & dirty flash the rom you're using again.
Fullmetal Jun said:
Install the latest xposed installer apk (non-magisk) from the official thread. Open the app & install the xposed framework & reboot. Reboot will take some time.
Then u can download some modules like GravityBox & activate & reboot to use it
If something goes wrong, idk. I think u have to try to get to twrp & dirty flash the rom you're using again.
Click to expand...
Click to collapse
okay! thanks alot bro!
zinou111 said:
hello!
I have an s6 edge (G925F), running on latest global elite ROM 4.1 (nougat 7.0), and I have latest Magisk (16.0).
I want to install Xposed framework, but I'm confused which way is the safest and less bootloop-y to install it.
should I install it systemlessly through Magisk manager [Xposed Framework (SDK 24)]? or should i flash it with twrp from this thread?
i really don't want to brick it or lose anything xD
Click to expand...
Click to collapse
Also you can download xposed uninstaller from official xposed site and if rom bootloops flash that in twrp and it will uninstall it and you can boot phone then.
El Solido said:
Also you can download xposed uninstaller from official xposed site and if rom bootloops flash that in twrp and it will uninstall it and you can boot phone then.
Click to expand...
Click to collapse
even better! thanks!
can u tell me in short why it causes problems like this? (bootloops)
zinou111 said:
even better! thanks!
can u tell me in short why it causes problems like this? (bootloops)
Click to expand...
Click to collapse
It won't bootloop, after you flash xposed zip in twrp, wipe cache and dalvik cache, then reboot, it will work properly.
i think its working now as its shown in the screenshot..
it took like 6-7min to boot after flashing it.. is this normal?
will rebooting take longer now after installing xposed? or its just the first boot?
one more thing, what are the best modules for nougat?
and thanks all of you for help!
Hey all, so I iflashed lineageos 17 4.9 kernel by mistake. It slightly heats up my device .
Can I downgrade to 3.18 safely?
If so, how??
Safe to dirty flash this?
https://forum.xda-developers.com/redmi-s2/development/rom-lineageos-17-1-t4042045
One more question:
Some of my apps shows root detection with 4.9 version then crashes but I haven't rooted.
I tried a lotta methods: flashed magisk uninstaller, flashed installer then uninstaller and even use magisk hide feature with magisk installed but none works. Is this because the ROM that I'm using is in Testing Phase? Also it shows SE Linux disabled.
https://forum.xda-developers.com/redmi-s2/development/rom-lineageos-17-1-t4103145
Sorry for not looking properly into description, I'm new to all this stuff
Do clean flash or u can try other roms with 4.9 kernel other rom dosent have this prblm
mohitdabas07 said:
Do clean flash or u can try other roms with 4.9 kernel other rom dosent have this prblm
Click to expand...
Click to collapse
Sorry for late response, i clean flashed n and switched to Cs 3.18, but thanks anway.
So far im liking the os. There is one problem though, Root detection in certain apps problem still persists even though device not rooted. Anyway to solve this problem?
Thanks.
sk971 said:
Sorry for late response, i clean flashed n and switched to Cs 3.18, but thanks anway.
So far im liking the os. There is one problem though, Root detection in certain apps problem still persists even though device not rooted. Anyway to solve this problem?
Thanks.
Click to expand...
Click to collapse
Root it by magisk and use magisk hide
mohitdabas07 said:
Root it by magisk and use magisk hide
Click to expand...
Click to collapse
Ok, i flashed magisk 20.4, then installed magisk manager 7.5.1 and from settings activated Magisk Hide, but root detection still occurs and app crashes after that.
IDK why?
Tapping on safety net check stats on magisk manager shows both ctsprofile n basicintegrity to "true".
Do i have to encrypt my phone to fix this problem? Its disabled atm.