Related
master and mister who expert with android. please help me......
my sxl is hardbrick and totally death plese tell me what i can do to fix.....
egisetiyo said:
master and mister who expert with android. please help me......
my sxl is hardbrick and totally death plese tell me what i can do to fix.....
Click to expand...
Click to collapse
You need to provide full details what is happening. Does it switch on? Do you see a flicker when you turn on or what happened and every single bit of detail you think can be helpful. How do you know it's hardbrick. Do you know the difference between soft and hard brick?
Asking a question without details is not going to help. Ask again in details!
help
Hnk1 said:
You need to provide full details what is happening. Does it switch on? Do you see a flicker when you turn on or what happened and every single bit of detail you think can be helpful. How do you know it's hardbrick. Do you know the difference between soft and hard brick?
Asking a question without details is not going to help. Ask again in details!
Click to expand...
Click to collapse
my phone is off totally cant turn on when i push the button power. this hapen after i root my phone. when i charge my sxl, the light indictor is not turn on. sory with my bad english language master and please help me
anyone plese help me
Try Flashing firmware again using flashtool or SUS?
Try to remove the battery for about 10 minutes ,,it should fix the problem
master n mister, i had try all but the problem i cant acses my sxl when i want to flash with flashtool in pc. my sxl is not recgnze. that any trick who can fix this problem? plis share n help me
Do one thing.. Remove Battery, press power button for around 10-12 seconds.. Insert the battery and try to flash again using flashtool..
saurabh007 said:
Do one thing.. Remove Battery, press power button for around 10-12 seconds.. Insert the battery and try to flash again using flashtool..
Click to expand...
Click to collapse
thx u brother saurabh007, but the trick is still not succses. if i use usb jig are working sony?
once again thnx 4 u help i very apriciade
egisetiyo said:
thx u brother saurabh007, but the trick is still not succses. if i use usb jig are working sony?
once again thnx 4 u help i very apriciade
Click to expand...
Click to collapse
Are you sure that you got battery? Can you get same battery from some friend and try to power on your phone?
egisetiyo said:
my phone is off totally cant turn on when i push the button power. this hapen after i root my phone. when i charge my sxl, the light indictor is not turn on. sory with my bad english language master and please help me
Click to expand...
Click to collapse
egisetiyo said:
anyone plese help me
Click to expand...
Click to collapse
egisetiyo said:
master n mister, i had try all but the problem i cant acses my sxl when i want to flash with flashtool in pc. my sxl is not recgnze. that any trick who can fix this problem? plis share n help me
Click to expand...
Click to collapse
egisetiyo said:
thx u brother saurabh007, but the trick is still not succses. if i use usb jig are working sony?
once again thnx 4 u help i very apriciade
Click to expand...
Click to collapse
We can NOT help you until you provide specific details.
Answer these questions :
1.Do you have any idea about how to flash a ROM and how much experience & understanding you have of android?
2.What were you doing when your phone suddenly died?
3.Were you trying to change values of your ROM/kernel or trying to do a mod?
4.Tell me in details how your phone is behaving apart from your term DEAD. When you try to switch on, do you see flickering/ a dull black screen or nothing happens or do you see any slight light in dark.
5.Does it boot into flashmode/fastboot if you try?
6.Have you tried to charge it for few hours and left it there?
7.Are you sure it is NOT battery problem?
8. Did you drop it in any kind of liquid or anything.
9. What do you mean by root here. Your phone died DURING root, AFTER root or what?
I only asked 9 questions but your details must be equal to 20 questions if you are willing to fix your phone as we CAN NOT SHOOT STARS on a CLEAR SUNNY SKY.
siankatabg said:
Are you sure that you got battery? Can you get same battery from some friend and try to power on your phone?
Click to expand...
Click to collapse
yes off course. ok i will try brother
egisetiyo said:
yes off course. ok i will try brother
Click to expand...
Click to collapse
Can you just tell by which method did you root your device?
egisetiyo said:
master and mister who expert with android. please help me......
my sxl is hardbrick and totally death plese tell me what i can do to fix.....
Click to expand...
Click to collapse
just send the phone to the service centre,it is the easiest way
My Xperia L is not turning on
faizur1999 said:
just send the phone to the service centre,it is the easiest way
Click to expand...
Click to collapse
Thank you for the valuable details that have been provided. I am experiencing the same problem with my Xperia L. For Xperia L as per my understanding to get CWM you need custom Kernal and before installing this I was trying to root and unlock bootlader to get custom ROM installled. I am below average user had some experience in flashing and but I did something wrong the phone is totally dead now. Now I am trying to turn it on and go into recovery by using volume button and power button but just red light is blinking no Sony logo. I also try to connect this with PC but it recognized as unknown device. I also tried Sony SUS but PC is not recognizing the phone which I guess is required for SUS and flash tool. Please help me!
egisetiyo said:
yes off course. ok i will try brother
Click to expand...
Click to collapse
Is your sxl showing red led when you connect it to the charger..
If it showing the red led let it charge untill it turns green.
Then try to switch it on..
perivenkal said:
Thank you for the valuable details that have been provided. I am experiencing the same problem with my Xperia L. For Xperia L as per my understanding to get CWM you need custom Kernal and before installing this I was trying to root and unlock bootlader to get custom ROM installled. I am below average user had some experience in flashing and but I did something wrong the phone is totally dead now. Now I am trying to turn it on and go into recovery by using volume button and power button but just red light is blinking no Sony logo. I also try to connect this with PC but it recognized as unknown device. I also tried Sony SUS but PC is not recognizing the phone which I guess is required for SUS and flash tool. Please help me!
Click to expand...
Click to collapse
Try removing your battery for 5 minutes. Then try again and let us know how it goes. Your phone is not bricked, it can be salvaged, question is only if you need to send it in to repair. But first thing first, try removing battery and then come back.
Still Xperia L is not turning on, just giving three red light blinks
Redzo said:
Try removing your battery for 5 minutes. Then try again and let us know how it goes. Your phone is not bricked, it can be salvaged, question is only if you need to send it in to repair. But first thing first, try removing battery and then come back.
Click to expand...
Click to collapse
Thank you Redzo for your kind reply. I did the same but again the red light blinks three times but phone is not turning on and no Sony logo. Still it’s recognized as unknown device by the PC and just also tried on other pc but no luck. Got generic ftt to flash but the phone is still not being recognized by Sony flasher and SUS. Here in Pakistan there is no Sony service centres and I don’t want to give to local vendors. Please advise what should I do more
saurabh007 said:
Do one thing.. Remove Battery, press power button for around 10-12 seconds.. Insert the battery and try to flash again using flashtool..
Click to expand...
Click to collapse
Many many thanks to you Saurabh007.. I thought I've lost my phone but after reading your valuable and helpful words, I get it back, smiling face comes to me again..wow.. thank you so much..
FPThatea said:
Many many thanks to you Saurabh007.. I thought I've lost my phone but after reading your valuable and helpful words, I get it back, smiling face comes to me again..wow.. thank you so much..
Click to expand...
Click to collapse
My pleasure!
Sent from my C2104 using Tapatalk
[ROM][6.0] CyanogenMod 13.0 [ALPHA] have bricked some XPERIA L devices. So this thread is to help those people who are facing the problem. I came across some methods to recover their Xperia L. Although, I am not sure it will work because I haven't tried it myself (Can't risk bricking my phone on purpose just to check this method which may or may not fix it ). But please go ahead and try it.
It's better to try than to cry!
Click to expand...
Click to collapse
METHOD 1
Remove Battery, press power button for around 10-12 seconds..then press and hold volume up, a Insert the battery , fash tft file using flastool
Source: https://www.youtube.com/watch?v=lycyxdkNlz8 (Comment by KãyRá S.s)
METHOD 2
Disconnect the phone from PC if connected Remove the battery Press and hold the power button for 15-20 seconds Re-insert battery Flash latest FW using flashtool..
Source: https://www.youtube.com/watch?v=lycyxdkNlz8 (Comment by BEST FULLAPPS)
If anyone know a better method or a suggestion please post it...
you can't fix in any way broken partition table, only with jtag and similiar, this all should work for semibricked devices...
Hard Brick......
Flashing_Expert said:
you can't fix in any way broken partition table, only with jtag and similiar, this all should work for semibricked devices...
Click to expand...
Click to collapse
Sir plz help me out i have bricked my device. When i connect it to a charger it shows a greenish light for a second and the it fades out. No detection my pc. It says that it is an unidentified device. actually it happened after i flashed cm13 by olivier. It booted up fine. I then just shut it down to install gapps. But it didnt respond any more.
udaykapoor97 said:
Sir plz help me out i have bricked my device. When i connect it to a charger it shows a greenish light for a second and the it fades out. No detection my pc. It says that it is an unidentified device. actually it happened after i flashed cm13 by olivier. It booted up fine. I then just shut it down to install gapps. But it didnt respond any more.
Click to expand...
Click to collapse
You had to install the latest package.. if u didn't only then u would've got hard bricked... cm13 is now tested by too many people and it runs without bugs.. so it may be the fault with the version of cm13 you used..
udaykapoor97 said:
Sir plz help me out i have bricked my device. When i connect it to a charger it shows a greenish light for a second and the it fades out. No detection my pc. It says that it is an unidentified device. actually it happened after i flashed cm13 by olivier. It booted up fine. I then just shut it down to install gapps. But it didnt respond any more.
Click to expand...
Click to collapse
oh damn another one guy same happened to me with same rom ...
sorry but this means your phone is dead like mine, your bootloader is corrupted so device is unable to boot to kernel nor to system
no flashmode or fastboot mode, you can see it only in device manager (with proper drivers) as qhusb dload 9008
sadly we don't have proper files for QPST software so nobody unbricked his XL to this date
only chance is motherboard replacement
udaykapoor97 said:
Sir plz help me out i have bricked my device. When i connect it to a charger it shows a greenish light for a second and the it fades out. No detection my pc. It says that it is an unidentified device. actually it happened after i flashed cm13 by olivier. It booted up fine. I then just shut it down to install gapps. But it didnt respond any more.
Click to expand...
Click to collapse
btw you had 2 partitions on your microsd? I need to know...
Hi, is it possible to have some more information on the situations with cm13 that have caused a hard-brick? I understood that that the features such as link2sd and app2sd are potentially dangerous? Is this understanding correct? If yes, could you please explain why and under which circumstances this could create troubles?
Do you have any further suggestions on what to avoid?
Many thanks in advance for your expert advice.
I wanted to try cm13 on my spare xperia l, but would like to avoid a hard brick...
Cheers,
Hennng
xleng said:
Hi, is it possible to have some more information on the situations with cm13 that have caused a hard-brick? I understood that that the features such as link2sd and app2sd are potentially dangerous? Is this understanding correct? If yes, could you please explain why and under which circumstances this could create troubles?
Do you have any further suggestions on what to avoid?
Many thanks in advance for your expert advice.
I wanted to try cm13 on my spare xperia l, but would like to avoid a hard brick...
Cheers,
Hennng
Click to expand...
Click to collapse
Its already been fixed in newer builds, also, the developer has stopped the development. But you can surely use CM13 Based ROMs since they also have better editing options.
I really cant wait for cm13. It really pleases me If rom get fixes
hey guys.
so recently i installed an app called "kingroot" which helps enhance performance by rooting. Today my device ran out of battery and when i connected it to a charger, bootloader screen automatically appears and shows: 'boot-up failed'. I have not installed any custom ROM and the device was running stock ROM (6.0).
To be honest, I am not a developer and have no clue about this. all options shown in bootloader lead to a dead end. The battery won't charge and connecting it to my pc wasn't helpful either. All I want to do is run my stock rom, which doesn't seem to be happening.
Device: Moto G 2014 (dual sim)(India)
Need help Urgently.
thanks
Oh...S ,no no one answer,and how about now?
hentecha said:
Oh...S ,no no one answer,and how about now?
Click to expand...
Click to collapse
I threw that phone into trash can.
Hi guys its the 3rd time that i post here in the forum hopping to restore my "dead" Moto G3 XT1543 1GB RAM Snapdragon 410 (MSM8916).
Some days ago I've unlock my phone bootloader in order to install CM14.1 and i did it with success! but my sim card wasn't working, so, I tried to look for a solution. And I found a video on youtube that showed the supost fix for this issue, but i was wrong. I've flashed the file which broke my phone immediately and now my phone doesn't do ANYTHING!! Well, at least it shows on my computer as QDLoader 9008 but for now on I dont know what I have to do! I know that the easiest way to fix it is buying another motherboard, but I think that still hope for someone to find the way to fix it! Well, if the pc recognizes the processor so there's something to be done right?
I had searched all over the internet during this week, and I found some interesting possible ways to fix it, but im not a developer so I need help and opinions from other people.
1)The first way was to change the mode to 9006 aka diag mode though some files wich in theory allows you to acces eMMC partition and restore all the 29 inside partition and recover your phone. The problem is: I don't know how to change it to diag mode, but yea i have the needed files, and i don't have the tool to acces the eMMC of the phone and i dont have a backup of the partitions to write over the corrupted ones.
2)The second way was to use this tutorial *http://www.droidsavvy.com/unbrick-qualcomm-mobiles/* that i still havent tried since my phone isn't with me right now. So, in this supose way we can contact the phone through a tool called QFIL and try to "Inject" the bootloader or whatever, in the phone to foce him into a bootloop and so enabling the fastboot mode which allows you to install a rom later on. well the problem for this one is, i dont know if it works on your moto g3 but i gonna try. (if you try this option tell me and i gonna upload the needed files because the folder avaliable in the link contais files for the processor Snapdragon 610 and Moto G3 processor is a 410)
3) The third way is a Jtag repair in a authorized store, but i dont think Moto G3 have a jtag fix (im posting this possibility because i could be wrong)
4) In this way could be a updated Blank Flash actually used to hard unbrick the Moto G1 and I Guess the G2? But im not a developer and I dont know too much about programing, but i'm sure someone out there is a pro
5) Use the QPST which is kinda the same thing as use a eMMC tool? ( again im not a dev ) and from what i got, is used to config all your phone from scratch. would be good if there's a tuto out there
6) Sit and wait till Motorola release the MBM-CI 5.0 which from what i got is used like the Blank Flash or used to make a Blank Flash idk
AGAIN!!! IM NOT A DEV, THIS IS JUST SOME WAYS THAT I FOUND OUT THERE ON THE INTERNET WHICH COULD BE USED TO FIX YOUR BELOVED MOTO G3!! SO, I'M SHARING ALL MY RESEACH WITH YOU GUYS BECAUSE IS A SHAME HAVE TO DUMP MY DEVICE LIKE THAT OR HAVE TO EXPEND LIKE R$ 500 IN A NEW MOTHER BOARD WHICH IN DOLLAR ITS LIKE 1600 U$D (this is Brazil guys yea it's a horrible country T_T ) SO I HOPE THAT THIS POST HELPS SOMEBODY AND IF YOU GOT SOME INFO SHARE TO HELP US TRY TO FIX THE PHONE!
hey you got successful??? in unbricking your phone?
[email protected] said:
hey you got successful??? in unbricking your phone?
Click to expand...
Click to collapse
not yet, i send my phone to an authorized i hope they can fix it via programming box
IkkyShad said:
not yet, i send my phone to an authorized i hope they can fix it via programming box
Click to expand...
Click to collapse
Ohhkay
You'll need blankflash for this device, that's the only thing which will take it back to bootloader mode so you can flash a firmware. Blankflash is usually found in stock firmwares, however the chances are kinda low
siredux said:
You'll need blankflash for this device, that's the only thing which will take it back to bootloader mode so you can flash a firmware. Blankflash is usually found in stock firmwares, however the chances are kinda low
Click to expand...
Click to collapse
yeah i know, i tried everything in 3 weeks but with no success, unfortunately the moto g3 firmwares are kinda different from other firmwares
IkkyShad said:
yeah i know, i tried everything in 3 weeks but with no success, unfortunately the moto g3 firmwares are kinda different from other firmwares
Click to expand...
Click to collapse
Can we even try a firmware of Moto g 2 Nd gen ,to get into fastboot anyhow ? Bcoz Moto g 2nd gen is hardbirck recoverable
[email protected] said:
Can we even try a firmware of Moto g 2 Nd gen ,to get into fastboot anyhow ? Bcoz Moto g 2nd gen is hardbirck recoverable
Click to expand...
Click to collapse
yeah, you can try but the models are different and also the partitions inside the phone... try it out and if it works you can post here
No u can't try the Moto g2 firmware..... As Moto g2 is also waiting for MBM CI 5 file for lollipop and Motorola is not releasing those file needed for blankflash
Sorry to bump needlessly but has there been any progress in this regard?
Has anyone found a solution or blankflash files?
I managed to hardbrick my device while trying to resize the system and userdata partitions (stupid, I know)
Jaysin365 said:
Sorry to bump needlessly but has there been any progress in this regard?
Has anyone found a solution or blankflash files?
I managed to hardbrick my device while trying to resize the system and userdata partitions (stupid, I know)
Click to expand...
Click to collapse
No... And just like previous Moto devices, it is unlikely we will ever get the necessary files.
Same situation, any updates?
I'm currently facing the same situation with XT1543, it ran Marshmallow 6.0 stock (came with Lollipop) and suddenly it hard bricked (last time i checked there were no software updates and even if there were, the phone would not restart itself to update). I ran blankflash but the results were these:
greeting device for command mode
opening device: \\.\COM3
OKAY [ 0.001s]
greeting device for command mode
FAILED (blank-flash:greet-device:error reading packet)
Click to expand...
Click to collapse
I appreciate any help!
gibarsin said:
I'm currently facing the same situation with XT1543, it ran Marshmallow 6.0 stock (came with Lollipop) and suddenly it hard bricked (last time i checked there were no software updates and even if there were, the phone would not restart itself to update). I ran blankflash but the results were these:
I appreciate any help!
Click to expand...
Click to collapse
If you can't get to the bootloader, it's toast... we do not have the proper files to do a Qload reflash, and the chances of getting them are near zero.
Try the usual... drain the battery and hold Power+Vol Dn (normal method to access bootloader) or press and hold Power+Vol Dn for 15-30 seconds, if you can't get to the bootloader there is NO recovery method available. Sorry.
acejavelin said:
If you can't get to the bootloader, it's toast... we do not have the proper files to do a Qload reflash, and the chances of getting them are near zero.
Try the usual... drain the battery and hold Power+Vol Dn (normal method to access bootloader) or press and hold Power+Vol Dn for 15-30 seconds, if you can't get to the bootloader there is NO recovery method available. Sorry.
Click to expand...
Click to collapse
Thanks for the quick reply, I will post my results here whether it's successful or not.
acejavelin said:
If you can't get to the bootloader, it's toast... we do not have the proper files to do a Qload reflash, and the chances of getting them are near zero.
Try the usual... drain the battery and hold Power+Vol Dn (normal method to access bootloader) or press and hold Power+Vol Dn for 15-30 seconds, if you can't get to the bootloader there is NO recovery method available. Sorry.
Click to expand...
Click to collapse
+1 on this.
The only other thing I would do is take it apart and detach one wire from battery and short that lose wire to the other wire (short the phone, NOT the battery!) for 15 sec or so and reconnect wire to battery and put phone back together and try boot to bootloader (power plus vol-dn). If no go, at that point if it were worth it I would give it to ATT to fix, or toss it in the drawer for parts.
I too hard bricked my g3.
My PC detected it as Qualcomm 9008 mode
Plz help how to solve this
Durga teja said:
I too hard bricked my g3.
My PC detected it as Qualcomm 9008 mode
Plz help how to solve this
Click to expand...
Click to collapse
Tell us how you bricked it?
KrisM22 said:
Tell us how you bricked it?
Click to expand...
Click to collapse
Rooted and installed twrp nd framework on 5.0
Bro accidentally updated to 6.0 on WiFi
Blank screen. No bootloader.
LED blinkinh
Durga teja said:
Rooted and installed twrp nd framework on 5.0
Bro accidentally updated to 6.0 on WiFi
Blank screen. No bootloader.
LED blinkinh
Click to expand...
Click to collapse
beyond my knowledge. Hopefully someone will jump in.
Durga teja said:
Rooted and installed twrp nd framework on 5.0
Bro accidentally updated to 6.0 on WiFi
Blank screen. No bootloader.
LED blinkinh
Click to expand...
Click to collapse
If there is no bootloader and the only thing that can be seen on the computer is QdLoader mode, it's done... Send it to Moto for repair or send it to the recycler, there is no fix we can do.
The first WW firmware of ASUS ROG Phone 5, and the international version of the machine is this firmware.
WW_ZS673KS_18.0810.2101.95_M2.13.24.9-ASUS_1.1.46_Phone-user.raw.zip
https : //drive.google.com/file/d/14MDurYpjNcmTPb-prx20gGBRkVz9KbkI/view?usp=sharing
WW_ZS673KS_18.0830.2101.75_M2.13.24.14.1-ASUS_1.1.63_Phone-user.raw.zip
WW_ZS673KS_18.0830.2101.75_M2.13.24.14.1-ASUS_1.1.63_Phone-user.raw.zip
drive.google.com
any tutorial for flashing rog 5 to WW?
Will my Rog Phone II brick if i try to put that firmware and sourse ?
I am happy with my rog II i only want ROG Phone 5 ultimate live wallpapers. It look awesome.
Is there a chance to replace ROG Phone II firmware with ROG 5 one ?
Views 354 ,,, not even one answer.
Simply Yes or No will do.
gushterica said:
Views 354 ,,, not even one answer.
Simply Yes or No will do.
Click to expand...
Click to collapse
That's something you should already know by looking into any thread for any device : NEVER ever try to put a firmware from a different device. Lots of things a related to the specific hardware combination of each device.
gushterica said:
Will my Rog Phone II brick if i try to put that firmware and sourse ?
I am happy with my rog II i only want ROG Phone 5 ultimate live wallpapers. It look awesome.
Is there a chance to replace ROG Phone II firmware with ROG 5 one ?
Click to expand...
Click to collapse
Yes 100% brick , This is for rog5 only rog5
I have a bricked Rog 5 in edl 9008 mode plz share fix
i have rog 5 phone need to unlock boot loder in del mode only there are any solution plz help me
johnny886 said:
The first WW firmware of ASUS ROG Phone 5, and the international version of the machine is this firmware.
WW_ZS673KS_18.0810.2101.95_M2.13.24.9-ASUS_1.1.46_Phone-user.raw.zip
https : //drive.google.com/file/d/14MDurYpjNcmTPb-prx20gGBRkVz9KbkI/view?usp=sharing
WW_ZS673KS_18.0830.2101.75_M2.13.24.14.1-ASUS_1.1.63_Phone-user.raw.zip
WW_ZS673KS_18.0830.2101.75_M2.13.24.14.1-ASUS_1.1.63_Phone-user.raw.zip
drive.google.com
Click to expand...
Click to collapse
please help me!!!! (rog5 8\128\tencent\) im deleted folders "sensors" on root directory/vendor/factory/. Now i cant restore my device(((. raw file not help me! how can i do?
Thank you I saved my phone thanks to you
Umit0006 said:
Thank you I saved my phone thanks to you
Click to expand...
Click to collapse
What do You mean?
I bought online a ROG Phone 5 with global ROM but I didn't know it's Tencent edition (which was a bad idea). First day I held my ROG5 in my hand it worked for a few hours until I installed the "Find My Device" app, the phone was suddenly dead.
So I tried to turn it on while it's charged and while it's not. Both times it didn't work. I tried to wipe data and reboot system in Fastboot mode with no luck and it's show something like "...your Android system is corrupted..." and gave me option to try again. When I tried to charge, the vibration, the charging light and the backlight didn't turn and it didn't show it's charging.
The function of pressing up volume and power buttons together only worked when I plugged in the charging cable. Please enlighten me of what should I do next.
ali72873 said:
I have a bricked Rog 5 in edl 9008 mode plz share fix
Click to expand...
Click to collapse
I have an Edl Firmware but I don't tested it.
jano83 said:
i have rog 5 phone need to unlock boot loder in del mode only there are any solution plz help me
Click to expand...
Click to collapse
Only edl mode can help you to unlock bootloader.
ahihmount said:
I bought online a ROG Phone 5 with global ROM but I didn't know it's Tencent edition (which was a bad idea). First day I held my ROG5 in my hand it worked for a few hours until I installed the "Find My Device" app, the phone was suddenly dead.
So I tried to turn it on while it's charged and while it's not. Both times it didn't work. I tried to wipe data and reboot system in Fastboot mode with no luck and it's show something like "...your Android system is corrupted..." and gave me option to try again. When I tried to charge, the vibration, the charging light and the backlight didn't turn and it didn't show it's charging.
The function of pressing up volume and power buttons together only worked when I plugged in the charging cable. Please enlighten me of what should I do next.
Click to expand...
Click to collapse
I've the exactly the same problem. I don't how to fix it. No one is replying me.
I bought my phone from Aliexpress and is tencent version flashed with global. After opening and setting it up, it was working fine and started playing pubg. After about 1 hour, it just died. No warning or anything, just ploof.
It doesn't respond to anything, power, volume +, volume -. Nothing when it's not charging.
But When I plug it into its charger, it does a boot loop.
When charging on the side, it boots up the android logo then the ROG logo but dies right after.
When charging on the bottom, it flashes the android logo and dies.
While it does that I held the volume up button, I can access fastboot and it stays on with the options:
- Start
- Restart bootloader
- Recovery mode
- Power off
I tried every option to no avail.
When I plug out the charger while in fastboot, it dies.
I think the battery connection is fried.
Did you and just let it charge using the bottom port for at least 30 mins?
Yes left it overnight
gushterica said:
Views 354 ,,, not even one answer.
Simply Yes or No will do.
Click to expand...
Click to collapse
If all you want is live wallpaper, you could pull the live wallpaper individually. If you have any questions about how, they belong in a new thread.
johnny886 said:
The first WW firmware of ASUS ROG Phone 5, and the international version of the machine is this firmware.
WW_ZS673KS_18.0810.2101.95_M2.13.24.9-ASUS_1.1.46_Phone-user.raw.zip
https : //drive.google.com/file/d/14MDurYpjNcmTPb-prx20gGBRkVz9KbkI/view?usp=sharing
WW_ZS673KS_18.0830.2101.75_M2.13.24.14.1-ASUS_1.1.63_Phone-user.raw.zip
WW_ZS673KS_18.0830.2101.75_M2.13.24.14.1-ASUS_1.1.63_Phone-user.raw.zip
drive.google.com
Click to expand...
Click to collapse
So what was the question?? There's a firmware that you can flash through fastboot already on the forums
gushterica said:
Views 354 ,,, not even one answer.
Simply Yes or No will do.
Click to expand...
Click to collapse
This Is a thread dedicated to the ROG Phone 5
Simply put, YES
It will brick your device, because they're two different variants.