Database Info

mate 7 in boot loop locked bootloader

HELP
my mate 7 in bootloop i haven't unlock botloader, i can access to recovery mode (stock) and fastboot mode only, i try to unlock boot loader on the site of HUAWEI without success it always said 'this HUAWEI ID has not been used on this device for more than 14 ays'
how can i fix this problem help me please
Thanks a lot.

hi guys no one helps me???
please help i haven't found solution

after long time searching the web and googling try chinese web sites and other english forums, sending mails in english chinese.... NOTHING RIEN NADA
i'm so disappointed my phone still not working and i'm so frustrated to see that no one gives me an answer!!!?

Here in the türkish Forum is your solution
http://turkpda.com/konu/huawei-ascend-mate-7-bootloader-kilit-kodu-alma-yeni-yoentem.1137/
http://turkpda.com/konu/huawei-ascend-mate-7-bootloader-kilidini-acma.876/

so, was your problem solved?

Skorpi58 said:
Here in the türkish Forum is your solution
http://turkpda.com/konu/huawei-ascend-mate-7-bootloader-kilit-kodu-alma-yeni-yoentem.1137/
http://turkpda.com/konu/huawei-ascend-mate-7-bootloader-kilidini-acma.876/
Click to expand...
Click to collapse
i have read the thread in english, in french (using google translate) but i didnt understand my phone doesnt boot, so how can i install kingroot.apk or honortuner.apk ???
my big problem is that i used my phone with HUAWEI-ID for only 3 three days so i can't have yhe unlock code from huawei official website :crying:

smich_ayane said:
i have read the thread in english, in french (using google translate) but i didnt understand my phone doesnt boot, so how can i install kingroot.apk or honortuner.apk ???
my big problem is that i used my phone with HUAWEI-ID for only 3 three days so i can't have yhe unlock code from huawei official website :crying:
Click to expand...
Click to collapse
if you can't open your device it's a big problem

try this
if bootloader never unlocked before.......
try download last version hisuite 4.0 and connect phone to laptop via usb .... keeping
press down values and power together until you see fastboot mode
in hisuite click SYSTEM RECOVERY let hisuite complete flash rom automatically

xda-luffy said:
if bootloader never unlocked before.......
try download last version hisuite 4.0 and connect phone to laptop via usb .... keeping
press down values and power together until you see fastboot mode
in hisuite click SYSTEM RECOVERY let hisuite complete flash rom automatically
Click to expand...
Click to collapse
where the link for hisuite 4.0?

orly1001 said:
where the link for hisuite 4.0?
Click to expand...
Click to collapse
m.huawei.com/zamobile/consumer/support/search/index.htm?proid=Jazz-TL10&proKey=Mobile%20Phones/Smartphones/Jazz-TL10

xda-luffy said:
m.huawei.com/zamobile/consumer/support/search/index.htm?proid=Jazz-TL10&proKey=Mobile%20Phones/Smartphones/Jazz-TL10
Click to expand...
Click to collapse
hisuite cannot detect my HAM 7,it is in fasboot recover mode and below is phone locked written in green color,TIA

orly1001 said:
hisuite cannot detect my HAM 7,it is in fasboot recover mode and below is phone locked written in green color,TIA
Click to expand...
Click to collapse
hisute must be detected HAM 7 ... try again and click SYSTEM RECOVERY >>>>>>>after a few seconds click RESUME button
if that not help must be find a way to unlock bootloader and flash system.img boot.img recovery.img in the same you are version damaged

xda-luffy said:
hisute must be detected HAM 7 ... try again and click SYSTEM RECOVERY >>>>>>>after a few seconds click RESUME button
if that not help must be find a way to unlock bootloader and flash system.img boot.img recovery.img in the same you are version damaged
Click to expand...
Click to collapse
how?please help even i will pay you just to to work my mobile again. my mobile show below of android logo is phone locked and rescue mode enter.
---------- Post added at 04:29 PM ---------- Previous post was at 04:26 PM ----------
xda-luffy said:
hisute must be detected HAM 7 ... try again and click SYSTEM RECOVERY >>>>>>>after a few seconds click RESUME button
if that not help must be find a way to unlock bootloader and flash system.img boot.img recovery.img in the same you are version damaged
Click to expand...
Click to collapse
after i click resume button shows recover and when i click recover it show your device is not supported for system recovery

Same problem here
There is no solution to this problem. I hope that if Huawei launches the official Marshmallow firmware, then we would be able to rectify this problems.. Otherwise I tried a lot but no results.. Best of Luck...
If u find any solution.. plz do let me know...
smich_ayane said:
HELP
my mate 7 in bootloop i haven't unlock botloader, i can access to recovery mode (stock) and fastboot mode only, i try to unlock boot loader on the site of HUAWEI without success it always said 'this HUAWEI ID has not been used on this device for more than 14 ays'
how can i fix this problem help me please
Thanks a lot.
Click to expand...
Click to collapse

For information "one-key recovery" method throw hisuite 4.0 needs unlock bootloader i have already try it without result so if some one have another idea he's welcome

This is exactly my problem, where i had flashed the update of Marshmallow, and it seems it wasn't correct. Now it is on boot loop and can't recover in fastboot. there should be a solution !! surprised even i can't shut it down, did they think about these kind of problems?

I have same problem
someone help me
how can I obtain unlock code??!!!!!!

Big_lord said:
I have same problem
someone help me
how can I obtain unlock code??!!!!!!
Click to expand...
Click to collapse
i have a simple solution. Lunch Hisuite. connect your phone to the system with cable. Hold power + vol up + vol down botton all at the sample time. Phone will vibrate, and will show huawei logo. now, let go of the three bottons. Huawei software update will lunch automatically and will start download...

oserib said:
i have a simple solution. Lunch Hisuite. connect your phone to the system with cable. Hold power + vol up + vol down botton all at the sample time. Phone will vibrate, and will show huawei logo. now, let go of the three bottons. Huawei software update will lunch automatically and will start download...
Click to expand...
Click to collapse
it's not worked

Get bootloader unlock code from dc-unlocker.com. it costs you 4 euro.
Sent from my JAZZ using XDA Free mobile app

There's any hope for hard bricked Moto G3? (no fastboot, Qdloader 9008)

Hi guys its the 3rd time that i post here in the forum hopping to restore my "dead" Moto G3 XT1543 1GB RAM Snapdragon 410 (MSM8916).
Some days ago I've unlock my phone bootloader in order to install CM14.1 and i did it with success! but my sim card wasn't working, so, I tried to look for a solution. And I found a video on youtube that showed the supost fix for this issue, but i was wrong. I've flashed the file which broke my phone immediately and now my phone doesn't do ANYTHING!! Well, at least it shows on my computer as QDLoader 9008 but for now on I dont know what I have to do! I know that the easiest way to fix it is buying another motherboard, but I think that still hope for someone to find the way to fix it! Well, if the pc recognizes the processor so there's something to be done right?
I had searched all over the internet during this week, and I found some interesting possible ways to fix it, but im not a developer so I need help and opinions from other people.
1)The first way was to change the mode to 9006 aka diag mode though some files wich in theory allows you to acces eMMC partition and restore all the 29 inside partition and recover your phone. The problem is: I don't know how to change it to diag mode, but yea i have the needed files, and i don't have the tool to acces the eMMC of the phone and i dont have a backup of the partitions to write over the corrupted ones.
2)The second way was to use this tutorial *http://www.droidsavvy.com/unbrick-qualcomm-mobiles/* that i still havent tried since my phone isn't with me right now. So, in this supose way we can contact the phone through a tool called QFIL and try to "Inject" the bootloader or whatever, in the phone to foce him into a bootloop and so enabling the fastboot mode which allows you to install a rom later on. well the problem for this one is, i dont know if it works on your moto g3 but i gonna try. (if you try this option tell me and i gonna upload the needed files because the folder avaliable in the link contais files for the processor Snapdragon 610 and Moto G3 processor is a 410)
3) The third way is a Jtag repair in a authorized store, but i dont think Moto G3 have a jtag fix (im posting this possibility because i could be wrong)
4) In this way could be a updated Blank Flash actually used to hard unbrick the Moto G1 and I Guess the G2? But im not a developer and I dont know too much about programing, but i'm sure someone out there is a pro
5) Use the QPST which is kinda the same thing as use a eMMC tool? ( again im not a dev ) and from what i got, is used to config all your phone from scratch. would be good if there's a tuto out there
6) Sit and wait till Motorola release the MBM-CI 5.0 which from what i got is used like the Blank Flash or used to make a Blank Flash idk
AGAIN!!! IM NOT A DEV, THIS IS JUST SOME WAYS THAT I FOUND OUT THERE ON THE INTERNET WHICH COULD BE USED TO FIX YOUR BELOVED MOTO G3!! SO, I'M SHARING ALL MY RESEACH WITH YOU GUYS BECAUSE IS A SHAME HAVE TO DUMP MY DEVICE LIKE THAT OR HAVE TO EXPEND LIKE R$ 500 IN A NEW MOTHER BOARD WHICH IN DOLLAR ITS LIKE 1600 U$D (this is Brazil guys yea it's a horrible country T_T ) SO I HOPE THAT THIS POST HELPS SOMEBODY AND IF YOU GOT SOME INFO SHARE TO HELP US TRY TO FIX THE PHONE!

hey you got successful??? in unbricking your phone?

[email protected] said:
hey you got successful??? in unbricking your phone?
Click to expand...
Click to collapse
not yet, i send my phone to an authorized i hope they can fix it via programming box

IkkyShad said:
not yet, i send my phone to an authorized i hope they can fix it via programming box
Click to expand...
Click to collapse
Ohhkay

You'll need blankflash for this device, that's the only thing which will take it back to bootloader mode so you can flash a firmware. Blankflash is usually found in stock firmwares, however the chances are kinda low

siredux said:
You'll need blankflash for this device, that's the only thing which will take it back to bootloader mode so you can flash a firmware. Blankflash is usually found in stock firmwares, however the chances are kinda low
Click to expand...
Click to collapse
yeah i know, i tried everything in 3 weeks but with no success, unfortunately the moto g3 firmwares are kinda different from other firmwares

IkkyShad said:
yeah i know, i tried everything in 3 weeks but with no success, unfortunately the moto g3 firmwares are kinda different from other firmwares
Click to expand...
Click to collapse
Can we even try a firmware of Moto g 2 Nd gen ,to get into fastboot anyhow ? Bcoz Moto g 2nd gen is hardbirck recoverable

[email protected] said:
Can we even try a firmware of Moto g 2 Nd gen ,to get into fastboot anyhow ? Bcoz Moto g 2nd gen is hardbirck recoverable
Click to expand...
Click to collapse
yeah, you can try but the models are different and also the partitions inside the phone... try it out and if it works you can post here

No u can't try the Moto g2 firmware..... As Moto g2 is also waiting for MBM CI 5 file for lollipop and Motorola is not releasing those file needed for blankflash

Sorry to bump needlessly but has there been any progress in this regard?
Has anyone found a solution or blankflash files?
I managed to hardbrick my device while trying to resize the system and userdata partitions (stupid, I know)

Jaysin365 said:
Sorry to bump needlessly but has there been any progress in this regard?
Has anyone found a solution or blankflash files?
I managed to hardbrick my device while trying to resize the system and userdata partitions (stupid, I know)
Click to expand...
Click to collapse
No... And just like previous Moto devices, it is unlikely we will ever get the necessary files.

Same situation, any updates?
I'm currently facing the same situation with XT1543, it ran Marshmallow 6.0 stock (came with Lollipop) and suddenly it hard bricked (last time i checked there were no software updates and even if there were, the phone would not restart itself to update). I ran blankflash but the results were these:
greeting device for command mode
opening device: \\.\COM3
OKAY [ 0.001s]
greeting device for command mode
FAILED (blank-flash:greet-device:error reading packet)
Click to expand...
Click to collapse
I appreciate any help!

gibarsin said:
I'm currently facing the same situation with XT1543, it ran Marshmallow 6.0 stock (came with Lollipop) and suddenly it hard bricked (last time i checked there were no software updates and even if there were, the phone would not restart itself to update). I ran blankflash but the results were these:
I appreciate any help!
Click to expand...
Click to collapse
If you can't get to the bootloader, it's toast... we do not have the proper files to do a Qload reflash, and the chances of getting them are near zero.
Try the usual... drain the battery and hold Power+Vol Dn (normal method to access bootloader) or press and hold Power+Vol Dn for 15-30 seconds, if you can't get to the bootloader there is NO recovery method available. Sorry.

acejavelin said:
If you can't get to the bootloader, it's toast... we do not have the proper files to do a Qload reflash, and the chances of getting them are near zero.
Try the usual... drain the battery and hold Power+Vol Dn (normal method to access bootloader) or press and hold Power+Vol Dn for 15-30 seconds, if you can't get to the bootloader there is NO recovery method available. Sorry.
Click to expand...
Click to collapse
Thanks for the quick reply, I will post my results here whether it's successful or not.

acejavelin said:
If you can't get to the bootloader, it's toast... we do not have the proper files to do a Qload reflash, and the chances of getting them are near zero.
Try the usual... drain the battery and hold Power+Vol Dn (normal method to access bootloader) or press and hold Power+Vol Dn for 15-30 seconds, if you can't get to the bootloader there is NO recovery method available. Sorry.
Click to expand...
Click to collapse
+1 on this.
The only other thing I would do is take it apart and detach one wire from battery and short that lose wire to the other wire (short the phone, NOT the battery!) for 15 sec or so and reconnect wire to battery and put phone back together and try boot to bootloader (power plus vol-dn). If no go, at that point if it were worth it I would give it to ATT to fix, or toss it in the drawer for parts.

I too hard bricked my g3.
My PC detected it as Qualcomm 9008 mode
Plz help how to solve this

Durga teja said:
I too hard bricked my g3.
My PC detected it as Qualcomm 9008 mode
Plz help how to solve this
Click to expand...
Click to collapse
Tell us how you bricked it?

KrisM22 said:
Tell us how you bricked it?
Click to expand...
Click to collapse
Rooted and installed twrp nd framework on 5.0
Bro accidentally updated to 6.0 on WiFi
Blank screen. No bootloader.
LED blinkinh

Durga teja said:
Rooted and installed twrp nd framework on 5.0
Bro accidentally updated to 6.0 on WiFi
Blank screen. No bootloader.
LED blinkinh
Click to expand...
Click to collapse
beyond my knowledge. Hopefully someone will jump in.

Durga teja said:
Rooted and installed twrp nd framework on 5.0
Bro accidentally updated to 6.0 on WiFi
Blank screen. No bootloader.
LED blinkinh
Click to expand...
Click to collapse
If there is no bootloader and the only thing that can be seen on the computer is QdLoader mode, it's done... Send it to Moto for repair or send it to the recycler, there is no fix we can do.

OppO Phone Power On problem

Hi All,
Can anyone help me.
My oppo phone has recently giving me problem when doing Power On. The phone stuck at OPPO logo forever. I need to do a hard reset everytime to restart the phone. A normal restart will not work whereby it stuck at displaying OPPO logo. Sometimes a normal restart will jump to another screen whereby I need to enter a password to use Android. Is there a password for Android? Please guide me how I can solve the problem and where can I download a newer firmware for my phone. Thnak You
Oppo phone model : R9s Plus
Android version : 6.0.1
Version: CPH1611EX_11_A.20_180803

BoonmaC said:
Hi All,
Can anyone help me.
My oppo phone has recently giving me problem when doing Power On. The phone stuck at OPPO logo forever. I need to do a hard reset everytime to restart the phone. A normal restart will not work whereby it stuck at displaying OPPO logo. Sometimes a normal restart will jump to another screen whereby I need to enter a password to use Android. Is there a password for Android? Please guide me how I can solve the problem and where can I download a newer firmware for my phone. Thnak You
Oppo phone model : R9s Plus
Android version : 6.0.1
Version: CPH1611EX_11_A.20_180803
Click to expand...
Click to collapse
Check this link out Root and install TWRP
Then try googling for custom ROMs or just get the stock ROM itself and reflash it.
The problem you are facing is called bootloop. Is it booting to safe mode? Try checking that out too.

Venkata Lochan Nune said:
Check this link out Root and install TWRP
Then try googling for custom ROMs or just get the stock ROM itself and reflash it.
The problem you are facing is called bootloop. Is it booting to safe mode? Try checking that out too.
Click to expand...
Click to collapse
Root and Install TWRP is for chinese edition only. No it is not booting to safe mode. Can you kindly help me. Thank you

BoonmaC said:
Root and Install TWRP is for chinese edition only. No it is not booting to safe mode. Can you kindly help me. Thank you
Click to expand...
Click to collapse
Doing anything is (almost) impossible without TWRP. Is there no version that supports yours? If none, you might just have 2 options : get a new phone or Develop them yourself(Takes time but that's a lot of fun, frustration and fear combined when done for the first time). Which one do you choose?

Venkata Lochan Nune said:
Doing anything is (almost) impossible without TWRP. Is there no version that supports yours? If none, you might just have 2 options : get a new phone or Develop them yourself(Takes time but that's a lot of fun, frustration and fear combined when done for the first time). Which one do you choose?
Click to expand...
Click to collapse
Or wait a sec, is your phone powered by mediatek? And is it booting to recovery? If yes, attach an image of the recovery.

Question Lenovo P11 pro Bootloop Stuck

Hello everybody,
I have a bootloop issue with a Lenovo P11 Pro. It is stuck in a bootloop and keeps restarting 1 min after Lenovo logo.
I have tried anything from Hard Reset to Rescue Smart Assistant Flashing and Qfil Flashing. It flashes successful but Tablet still doesn't want to boot up.
Have any ideas? I bought it like that so don't know what the person before me did to it.
Tablet seems to charge.
Thanks in advance for all the ideas!

emybuse said:
Hello everybody,
I have a bootloop issue with a Lenovo P11 Pro. It is stuck in a bootloop and keeps restarting 1 min after Lenovo logo.
I have tried anything from Hard Reset to Rescue Smart Assistant Flashing and Qfil Flashing. It flashes successful but Tablet still doesn't want to boot up.
Have any ideas? I bought it like that so don't know what the person before me did to it.
Tablet seems to charge.
Thanks in advance for all the ideas!
Click to expand...
Click to collapse
I haven't had this situation, but what firmware have you tried flashing? Have you read the threads about the region codes, and how the firmware has to match them (in the latest firmwares) or the region code has to be changed. I would try flashing an international firmware, and if that doesn't work try a china firmware. There are only two regions I think, so one of those should work.
I could have got the wrong end of the stick with this as I've not been in this situation, so not very carefully read those threads yet, so just a suggestion!

mdurkin said:
I haven't had this situation, but what firmware have you tried flashing? Have you read the threads about the region codes, and how the firmware has to match them (in the latest firmwares) or the region code has to be changed. I would try flashing an international firmware, and if that doesn't work try a china firmware. There are only two regions I think, so one of those should work.
I could have got the wrong end of the stick with this as I've not been in this situation, so not very carefully read those threads yet, so just a suggestion!
Click to expand...
Click to collapse
Rescue and Smart Asistant does the job automaticaly and it flashed TB-J706L_S620103_211124_ROW. And with Qfil I tried the TB-J706L_S243005_210601_ROW.

emybuse said:
Rescue and Smart Asistant does the job automaticaly and it flashed TB-J706L_S620103_211124_ROW. And with Qfil I tried the TB-J706L_S243005_210601_ROW.
Click to expand...
Click to collapse
RSA did not succeed in my case.
$ fastboot set_active a did the trick for me!

Amatöhr said:
RSA did not succeed in my case.
$ fastboot set_active a did the trick for me!
Click to expand...
Click to collapse
Fail : not unlock, help me

I didn't think I had to, when I plug in the tablet it pops up with the name and everything.

Hi, I have the same issue with a Tab 11 pro gen 2. Could you let me know how to solve it? I can't even find the recovery, and tried all button combinations. I can only go to fastboot or meta modes.

im literally stuck on this ( fastboot ) screen... it boots straight to this screen. If i plug the device into my pc it says device not recognised and none of the drivers seem to work. I have tried everything to shut it down so i can try flash via EDL, but the power button just takes me back to fastboot again...

I'm having the same reboot issue 1 minute or less after fully booting. I have no idea how to fix it

[CLOSED] Help! My redmi note 8 pro is Hard bricked and i cant get it to work!

Hello.
Today, after i flashed a rom using some weird ass chinese twrp on my redmi note 8 pro (which is global btw) the phone just would not turn on.
I have searched all day for a fix, but nothing seems to work. I discovered that while pressing the volume up button my phone appears as a mtk com port but after a few seconds the phone does not show up anymore in device manager. I tried using sp flash tool but it just wont detect my device (even when i press volume up) i tried also bypassing the mtk authentication but i have the same problem, the tool just wont detect my phone. Any help is really appreciated!

WhyisAethertaken said:
Hello.
Today, after i flashed a rom using some weird ass chinese twrp on my redmi note 8 pro (which is global btw) the phone just would not turn on.
I have searched all day for a fix, but nothing seems to work. I discovered that while pressing the volume up button my phone appears as a mtk com port but after a few seconds the phone does not show up anymore in device manager. I tried using sp flash tool but it just wont detect my device (even when i press volume up) i tried also bypassing the mtk authentication but i have the same problem, the tool just wont detect my phone. Any help is really appreciated!
Click to expand...
Click to collapse
@WhyisAethertaken Thread closed as duplicate of
Need help urgently! Hard bricked redmi note 8 pro!
Hello. Today, after i flashed a rom using some weird ass chinese twrp on my redmi note 8 pro (which is global btw) the phone just would not turn on. I have searched all day for a fix, but nothing seems to work. I discovered that while pressing...
forum.xda-developers.com
Please review the XDA Forum Rules with special emphasis on rule no. 5 and post only ONCE! Thanks for your cooperation.
This is the second and very last time that I remind you; first time was here:
[CLOSED]Poco x3 nfc not booting after flashing magisk
Yesterday i flashed magisk (using the new method of course) and when i tried to boot it would stop on the miui boot screen. I can go into fastboot and recovery but i dont have twrp installed. If anybody could help i would be grateful.
forum.xda-developers.com
Read my message as a friendly warning.
Regards
Oswald Boelcke
Senior Moderator