hi all guays
i try to flash this tab with spft
i flashed with meta mode(vol- +)
i get error pmt changed
i change service to firmware upgrade and start
da 100%
format 100%
download boot loader i get error 6047 and tab dont boot
any body help?
Related
so i tried flashing gravitymod's CMW to my W8 via SP flash tool. at first it did not work...after playing around i finally got CMW to load up and was able to flash the gravity mod rom...it turned out to be a cache error. well the rom booted up and quickly realized.........my phone would not recognize sim cards, there was no "reboot" option in the power menu and lastly no "navigation" app anymore .....and would not reboot to recovery from CMW
so being being that alot of issues were present i decided to re-flash everything with "SP Flash"
same issues were present... so desperately i just started trying stuff....dumb i know..
well in "SP Flash Tool" i went to the "Format" tab & accidentally hit "format whole flash"
so now the phone is completely bricked and wont power on. However my computer still recognizes the phone as "Mk usb device" or whatever.
"SP flash tool" wont let me flash anything and gives me this error...
""BROM ERROR : S_DL_GET_DRAM_SETTING_FAIL(5054) [EMI] Obtain DRAM Failed! [HINT]: Please check your load matches to your target which is to be downloaded.""
THL's links are down for an official rom restore... and they have virtually no support. little to no info on the web.. and my work phone is useless....please help me... atleast get it to boot!!!!!!! im begging you guys!!! ill pay via paypal!!
lenovo s820
I have the same problem BROM Error (5054)
Happens after following this link h ttp: // w w w.indragunawan.com/2013/09/installing-miui-v5-rom-on-lenovo-s820. html
Maybe I need the Lenovo S820 original scatter file.
:crying:
Please help me
Dear all, please try to help me
my tab is not rooted but after the lastest update it was stuck at logo i tried to wipe factory data but same it begin with bootloop then i download the official firmware from acer with sd card but i had an error. that's why i flashet it with sp flash tool i download A1-810 Firmware for flashing [4.4] from here http://forum.xda-developers.com/android/general/acer-ax-b1-t2875894
i think just the preloader was flashed and after it show me error 4008 but after i have black screen just the mediateck preloader connect and disconnect (
my Image version is Acer_AV0K0_A1-810_RV0HRC03_WW_GEN1
and my OTA is Acer_AV0K0_A1-810_1.055.00_WW_GEN1
i searched Acer_AV0K0_A1-810_RV0HRC03_WW_GEN1 FOR SPFT but i don't find. i'm lost (( and sorry for my bad english
hello,
i tried to install custom rom on bobarry k10se tablet (chinese tablet) has mediatake processor.
1) I wrongly did boot recovery with twrp image file with flashify mobile apk-- its showing bootloop only
2) then at recovery mode I tried to do wipe data and then wipe partion then I tried to install rom from sdcard but it shows - installation aborted.
3) at last i did back up & restore in recovery mode.. god.. its stuck to the flashing green robot screen and wont do anything else.
Please help me what should I do now, after starting the tablet it shows green flashing robot with written "installing system update" and nothing happnes.
I know I have done lots of mistake and tried to install custom RR 5.8.0 which failed. pls help this frnd.
i tried to flash with sp flash tool with other phones stock rom having same processor mt6580. (format all + download)
first it was installed successfully but tablet is not opening.
so again tried download only but it shows as brom error s_ft_enable_dram_fail (0xfc0).
please help me friends
i think its hard bricked now. its like switched off. if i connect to the pc via usb, there is only connecting-disconnecting sound.. nothing else happens.
i used sp flash tool with similar kind of firmware, the result shows- s_ft_unable_dram_fail (4032).
pls help me
Hi !
I see that you posted again here https://forum.xda-developers.com/an...rd-bricked-t3548246/post70826170#post70826170
Let`s keep everything in one place
Good luck !
thread closed
Hello,
I was trying to flash new firmware into my Eurostar ET9183G-HM14. I downloaded the firmware - MT6572_alps_ET9183G-HM14_gq_709_common_huima_hm14_4.4.2_sw01_hm_ET9183G-HM14-20150122. The first time it showed PMT changed for the rom it must be downloaded. Then I did a format except for the bootloader and then I flashed the ROM and it completed successfully. I tried to boot the device but it wouldn't boot. I went to reflash it again but it returns an error - BROM ERROR : S_FT_ENABLE_DRAM_FAIL (0xFC0). I don't know what to do. Can anyone please help ? It's really urgent.
U might be using the wrong Custom Rom or recovery.
so the problem is i installed the beta EMUI 5.0 nougat and by tutorial and installed twrp and rooted my phone. but i got new update but cannot update so i tried with flashfire to flash new firmwire with it. but in that process i did something wrong it says
Error mode
Attention
please update system again
error
func no:11 recovery image
error no :2 load faild
now i need to flash the stock recovery
i know how to connect to bootloader mode by pressing vol - and power button while turning on and connect the pc usb cable
now i need recovery.img but i tried it do not flash the firmwire it says system failure.
i need stock recovery.img and which update.app version so that i can make the phone work again