so the problem is i installed the beta EMUI 5.0 nougat and by tutorial and installed twrp and rooted my phone. but i got new update but cannot update so i tried with flashfire to flash new firmwire with it. but in that process i did something wrong it says
Error mode
Attention
please update system again
error
func no:11 recovery image
error no :2 load faild
now i need to flash the stock recovery
i know how to connect to bootloader mode by pressing vol - and power button while turning on and connect the pc usb cable
now i need recovery.img but i tried it do not flash the firmwire it says system failure.
i need stock recovery.img and which update.app version so that i can make the phone work again
Related
I tried to flash twrp with twrp manager app and tried to boot into recovery from power menu..And it stuck at boot logo.I also can't boot into system..Can flashing stock firmware save it???
And for now how can I turn it off ???Please help!!!
You can flash stock firmware. If you galaxy have bootloop when you see the Samsung logo, Press Power button and vol down when see screen of press home button. Now you can see the download mode.*
Sorry for my English
Hi...I flashed stock firmware via Odin but I am getting 'sw rev check fail' error.I have searched threads about this problem and its about tried to flash downgraded firmwares.Is it right???And yes I flashed latest weta g920f OLB bootloader+ modem and tried to update twrp with twrp manager app and twrp fails.And I tried to flash KSA-G920FXXU2COH8 and I am getting this error..What firmware should I flash???Any suggestions??pls...Thanks in advance..
Please see this thread
Good Day every one
I really need your urgent help
I have a chinese Mate7 Gold dual SIM that I upgraded it till I reached MT7-TL10C00B357 using OTA
I have unlocked the bootloader and rooted the phone and installed TWRP 2.7.8.0 for lolipop
then I tried to install a middle east update.app by extract the file and make flashable Zip using huawei extractor
after this trial the Phone went to rescue Mode with no access to TWRP Recovery
I have tried the following with No Use
1-Install huawei suite 4 and trying system recovry ...it install the recovery and when installing the system it fails and after that the phone goes back to rescue mode with no access to rcovery
2- I extracted the Cust, Recovery, System, Boot and userdata from the Stock Rom MT7-TL10C00B357 and I flashed them using fast boot flash after putting the phone in fastboot rscue mode... the flash was OK but after the five files were flashed and trying to reboot, the phone goes back to rescue mode
3- trying the same as step 2 and trying to flash the update.app using three buttons flash... the phone stuck at Huawei Ascened Logo and nothing happens
4- trying another Update.app of Android 4.4 and extracting cust,recovery,boot, system and userdata and flash them using fast boot.. flash is ok but rescue mode is still presist
5- I have tried several times to flash TWRP again .. the flash is ok but no access to TWRP only Rescue mode or fastboot rescue mode
6- I tried to change to oeminfo and custom.bin to be eu using Huawei SRK tool 1.8 but I failed
when trying to adb devices the result is empty
I heared from one psot that this might be a problem in the sensor although I dont see a direct relation
so any one could figure out a solution to this problem
I guess I have all the tools necessary but cant find a working solution
Please help me urgently
Sherif Nassif said:
Good Day every one
I really need your urgent help
I have a chinese Mate7 Gold dual SIM that I upgraded it till I reached MT7-TL10C00B357 using OTA
I have unlocked the bootloader and rooted the phone and installed TWRP 2.7.8.0 for lolipop
then I tried to install a middle east update.app by extract the file and make flashable Zip using huawei extractor
after this trial the Phone went to rescue Mode with no access to TWRP Recovery
I have tried the following with No Use
1-Install huawei suite 4 and trying system recovry ...it install the recovery and when installing the system it fails and after that the phone goes back to rescue mode with no access to rcovery
2- I extracted the Cust, Recovery, System, Boot and userdata from the Stock Rom MT7-TL10C00B357 and I flashed them using fast boot flash after putting the phone in fastboot rscue mode... the flash was OK but after the five files were flashed and trying to reboot, the phone goes back to rescue mode
3- trying the same as step 2 and trying to flash the update.app using three buttons flash... the phone stuck at Huawei Ascened Logo and nothing happens
4- trying another Update.app of Android 4.4 and extracting cust,recovery,boot, system and userdata and flash them using fast boot.. flash is ok but rescue mode is still presist
5- I have tried several times to flash TWRP again .. the flash is ok but no access to TWRP only Rescue mode or fastboot rescue mode
6- I tried to change to oeminfo and custom.bin to be eu using Huawei SRK tool 1.8 but I failed
when trying to adb devices the result is empty
I heared from one psot that this might be a problem in the sensor although I dont see a direct relation
so any one could figure out a solution to this problem
I guess I have all the tools necessary but cant find a working solution
Please help me urgently
Click to expand...
Click to collapse
I had tried all the methods in the globe to flash the 4 files cust,recovery,system..etc and nothing happened
till I got this program from another thread the program called DC Pheonix
the advantage of this program is that you can flash all the image files of any update.app while if you try to flash for example sensorhub.img using fastboot , you will get a message that command not allowed
so install the program and buy a 15 Euoro credit and flash the original last ROM that was on the phone
I could not wait till the morning I downloaded Phoenix DC and bought 15 credits = 15 Euoros and flashed the original update.app which was the chinese version MT7-TL10C00B357
The phone is working well nowwwwwwwwwwwwwwww Yupeeeeeeeeeeeeeeeeeeeee
I am so Happy
Happened to me before, sounds wierd but actually , I thought it's a hard problrm to solve and that actually made me solve it after working for 8 hours and the solution simply was reboot in fastboot and rescue mode will be Rescue&fastboot mode , then flash
Sent from my JAZZ using Tapatalk
please help me i hase emui 4..1
and i install twrp 4.1 and when i install nougat i install
supersu_v2.79_sr2 then
update_2 but when istall update it stop on writinh ratio i shut dun the phone but no login to twrp or to stock recovery
help me plaese
i flashed twrp from SRKTool the phone bootloop and i canot poweroff please help me
i was on 4.1 and i was unlock bootloader and twrp and i was insall nougat l29c185b560 wich have 3 files
supersu_v2.79_sr2 ----update_2------update_data_full_hw_meafnaf
when i flash update.zip in twrp it stop install on ratio i sutdown the phone and now the phone
is bootloop and not shutdown i try flash many recovery same problem my phone
is l29c185b--
https://forum.xda-developers.com/mate-8/general/how-to-install-nxt-l29c185b560-official-t3556789
I canot power off my phone but when I waited until the battery was discharged but the phone restart alone
I use method two by flash .img cust complet recovery complet boot complet but when flash system.img faild the rom exracted is l29c185b320
I try flash boot cust boot and system from nougat it complet but the problem same I canot dload I canot boot to recovery for wipe and the phone stay restart
please any help when I was flash nought it not complet it stop on writing ratio so I power off phone then the problem haben
boot loop my phone any help!!!!!
Hello everyone,
I've honor 6 L12 rooted, unlocked bootloader as I can see in fast boot and multi tool, I've installed TWRP recovery.
I just made a backup through TWRP saved in internal SD storage, and try to install but since that try, I hade problem like model changed to L01 and my version is ending with B000
Also the shape and look (of firmware and theme), have been changed.
I don't know what happened and why!
I tried to to restore custom rom and recovery but couldn't.
Now I can't use recovery mod because it's giving me this: Error!
Function No : (Func_Boot_RECOVERY)
Error No : 2
I've tried to use multi tool giving me error with any writing to device:
Faild remote command not allowed
Note: I'm still able to access normal mod, but it's hard, I've to try ton of times pressing buttons to boot to normal mod.
Please any help dears.
Update:
Now my device is not booting to nermal mode anymore.
I kept flashing through unbrick tool in multitools.
But I don't know exactly which firmware and model to flush!
And now I'm stuck on recovery mode (also with same error above) and fastboot mode when I restart and connect device to pc keep pressing volume down.
Any single help!
ALHARTHI6 said:
Update:
Now my device is not booting to nermal mode anymore.
I kept flashing through unbrick tool in multitools.
But I don't know exactly which firmware and model to flush!
And now I'm stuck on recovery mode (also with same error above) and fastboot mode when I restart and connect device to pc keep pressing volume down.
Any single help!
Click to expand...
Click to collapse
Which firmware you were on before issue?
No I didn't
As I said trying to restore my backup through TWRP but was in internal SD., that's it.
My real model is L12.
Version, I don't remember but it was on android 5.1.1 EMUI 3.1
Now I just used Sd method and recover device with last 4.0.1 EMUI for devolvers, but no Arabic language.
How to go to another firmware?
What is the best, satable one for my device?
And is there a good custom stable rom, especially if android 7 ?
Please full answer if available
Thanks again
android does not start. sometimes the "zui" screen appears and then the restart message
Displays messages
please help me
can you go to the stock recovery mode by Vol+ and power key ?
i have the exact same problem
i have access to recovery menu but the only options are
reboot system now
reboot to bootloader
apply update from adb
apply update from sd card
wipe data/factory reset
mount /system
view recovery logs
run graphics test
power off
Unbrick Lenovo Z5
I have same exact issue I need 3 files which did not come with stock ROM. I am getting this "qfil tool sahara fail error" with QFIL tool. These files are needed to erase.
rawprogram_unsparse.xml
rawprogram_unsparse_without_QCN.xml
Patch2.xml
These file supposed to be in the stock ROM but not.
PLEASE HELP!
me tooo need help with bricked z5 dont power on..just edl fastboot and twrp.. but cant flash any rom..and qfil firehose and sahara error