HI FRIEND AM AGAIN HERE WITH NEW UNBRICKING TUTORIAL FOR MICROMAX A35 AND OTHER Spreadtrum DEVICES
REQUIREMENTS :
1.cwm backup
2.cwm
3.boot.img
4.pc
5.mob which is stuck at boot logo and cant be flashed by research download or other tool
6.a rom {if backup doesnt work }
for those who are having stuck at boot logo problem ,
follow these steps
1.flash recovery to boot partiton
Code:
fastboot flash boot recovery.img
2.then press power key you ll boot in cwm
3.now wipe data and dalvik cache
4.place the backup in clockworkmod/backup/(your backup here)
5.now do restore backup .please do advance restore, restore system.img only
6.flash the boot.img to boot again
Code:
fastboot flash boot boot.img
link for backup
http://www.mediafire.com/download/86qssa1vs10doag/jelly+blend+cwm+backup+by+gopinaidu.zip
LINK FOR BOOT.IMG :
https://docs.google.com/file/d/0B8ks3Q1UXCFjZzJITS1MUHczM28/edit
credits
AKASH UJJAINKAR
PLEASE PRESS THANKS BUTTON
Not Working!
According to you I tried to unbrick my phone, but it didnt worked.
After 1st step I unable to boot in cwm. after flashing recovery into boot partition from the fastboot mode itself i tried to power on the phone so that it can boot into cwm but it didnt reacted. den i tried after removing battery, then also its not working.
My mobile is not getting started, when i try to switch it on it just continuously vibrates no display on screen nothing just vibration.
I am able it launch only fastboot. I don't know what to do, nothing is working on it. I tried to flash it by upgradedownload tool but that is also not working.
I extracted the .pac file I got these files.
boot.img
fdl1.bin
fdl2.bin
HVGA_logo_256.bmp
nvitem.bin
recovery.img
SC6820_DSP.bin
SC8800G_sc6820_modem_vlx.bin
SC8810.xml
system.img
u-boot-256M.bin
u-boot-spl-16k.bin
userdata.img
vmjaluna.imagenkcbsp-sc8810_nodebug
It will be good if i can place all these files in my phone by fastboot mode.
In fastboot mode I am getting only few partition viz.
boot , recovery, system, userdata
what about other MISC files with format .bin,.bmp? where should i place these files and how?
Please help me on this ... I struggling since 2 months.
ijaz_shariff said:
According to you I tried to unbrick my phone, but it didnt worked.
After 1st step I unable to boot in cwm. after flashing recovery into boot partition from the fastboot mode itself i tried to power on the phone so that it can boot into cwm but it didnt reacted. den i tried after removing battery, then also its not working.
My mobile is not getting started, when i try to switch it on it just continuously vibrates no display on screen nothing just vibration.
I am able it launch only fastboot. I don't know what to do, nothing is working on it. I tried to flash it by upgradedownload tool but that is also not working.
I extracted the .pac file I got these files.
boot.img
fdl1.bin
fdl2.bin
HVGA_logo_256.bmp
nvitem.bin
recovery.img
SC6820_DSP.bin
SC8800G_sc6820_modem_vlx.bin
SC8810.xml
system.img
u-boot-256M.bin
u-boot-spl-16k.bin
userdata.img
vmjaluna.imagenkcbsp-sc8810_nodebug
It will be good if i can place all these files in my phone by fastboot mode.
In fastboot mode I am getting only few partition viz.
boot , recovery, system, userdata
what about other MISC files with format .bin,.bmp? where should i place these files and how?
Please help me on this ... I struggling since 2 months.
Click to expand...
Click to collapse
many users tested it and it worked fine maybe u didnt follow correctly
Thanku so much its really works thnks man !!!
Problems in newly installed rom in micromax a35
I successfully flashed the stock rom in my bricked micromax a35 using the spreadtrum research download tool.
But there are a few problems I m getting. Please help.
1. Bluetooth is able to pair with other devices, but when I try to send or receive files using bluetooth, it doesn't accept.
2. IMEI number is changed for both sims. Will this create any problem?
3. When I try to call or somebody calls me, the dialer crashes and both sims shows no network.
4. Internet is not working.
Plz friends if there is any solution to this problem.
I had downloaded the stock rom files from xdadevelopers.
micromax a35 vibrate problem when switch on the phone
Hi,
My self pratik, i get some problem in my micromax a35.
that is when i try to switch it on it just continuously vibrates, no display on screen nothing just vibration
kindly provide me some solution
thanks
hey same problem here also pls reply any solution for this
mmx a35 stuck at logo
i was trying to install a custom rom but i cliked backup instead recovery it was taking much time so i removed battery now it is stuck at bolt logo . i have tried above method but when reboot again it stuck at bolt logo
Hey there,
I have a Micromax AQ4501, during flashing Custom ROM I think I made some mistake or selected improper ROM so my phone is not getting ON, it just shows the logo and that's it.
No recovery menu or any other option is available now, only fastboot mode is working...
Can u help me to solve this issue and recover my phone...?
Sent from my D2502 using XDA Free mobile app
mmx a35 stuck
While taking backup i removed the battery because it was taking time.....the sim cards were not detected,i thought factory reset would work but my phone is just vibrating again and again and not startingplease help me guys!!!
Hi there guys @ xda.
I need help with my mtk6572 phone which i bricked in a noob way.
I need help flashing it with SP Flash Tool which gives an error as described in title.
Here is how i bricked it.
Today i decided that i want to flash a custom recovery on my phone, so i did and it worked.
I experienced a bug on the recovery and decided i wanted to put the stoc recovery back.
I flashed it back and the recovery booted fine, wiped chache and did factory reset.
After i did that my phone got stuck on boot animation.
I then decided that it was a good idea to flash to complete stock rom back to my phone,
but chose the forma all + download option, so that the changes the custom recovery made
were deleted. Well, so i thought...
Right after the format i got an error that said that my firmware is not for my phone and failed.
Now if i try to format or download the stock rom (which i backed up from my device before flashing)
i get the error code in the title.
I tried uninstalling all the mtk drivers from my pc. When i connect my device it is picked up in device manager
as "unknown device", i then updated the drivers with mediatek preloader driver (and tried all the mtk drivers out there)
but the flash tool still gives the same error.
After i press the download button, and connect my phone, the bar at the bottom goes to 100%(red colour) then stays like that for 41 seconds.
Then it gives the error code and fails to flash.
I tried everything, from removing the battery, pressing vol+, vol-, power and all the combos in between, nothing.
If someone could help me unbrick my phone, i would be very greatfull.
P.S I have the stock rom backed up from my device and prepared with mtk droid tools for flash tool.
Hi,
Thanks for using XDA assist.
Please read this guide if you haven't already:
[TUT]MTK Android (Sp flash tool ) tutorial
If the guide doesn't help, please create a XDA account and ask your question in the link directly above as well.
Good Luck! - gsstudios
I am Arunjunai Rajan from India. I tried to unroot my moto g and restore back to stock firmware by using fastboot(which i saw in a website) but I dont know nothing about fastboot...Now my phone is stuck in Bootloop with the screen showing "Warning Bootloader Unlocked".....But I can go into bootloader mode by holding power and volume down button together....Through bootloader I installed TWRP recovery .....Now I can access only TWRP recovery in my phone and When I connect my phone with Computer using USB cable I can't see the internal Storage which I saw before this unrooting thing..........But i was able to copy the files into phone so i copied the XT1033_Retail_Asia_51_Untouched.zip and flashed using TWRP and rebooted it....But Still I stuck in Bootloader mode.....Please help me.....I am regretting for unrooting my phone now.....Please help me as soon as possible....Thanks in advance:fingers-crossed:
Flash Stock KK Firmware.
ArunjunaiRajan said:
I am Arunjunai Rajan from India. I tried to unroot my moto g and restore back to stock firmware by using fastboot(which i saw in a website) but I dont know nothing about fastboot...Now my phone is stuck in Bootloop with the screen showing "Warning Bootloader Unlocked".....But I can go into bootloader mode by holding power and volume down button together....Through bootloader I installed TWRP recovery .....Now I can access only TWRP recovery in my phone and When I connect my phone with Computer using USB cable I can't see the internal Storage which I saw before this unrooting thing..........But i was able to copy the files into phone so i copied the XT1033_Retail_Asia_51_Untouched.zip and flashed using TWRP and rebooted it....But Still I stuck in Bootloader mode.....Please help me.....I am regretting for unrooting my phone now.....Please help me as soon as possible....Thanks in advance:fingers-crossed:
Click to expand...
Click to collapse
You cant flash XT1033_Retail_Asia_51_Untouched.zip with twrp.. extract this .zip files to ADB minimal and fastboot folder and flash it throught fastboot mode
Just enter fastboot mode and flash each files (Ex: boot.img, logo.bin system etc) for commands check other page
so the problem is i installed the beta EMUI 5.0 nougat and by tutorial and installed twrp and rooted my phone. but i got new update but cannot update so i tried with flashfire to flash new firmwire with it. but in that process i did something wrong it says
Error mode
Attention
please update system again
error
func no:11 recovery image
error no :2 load faild
now i need to flash the stock recovery
i know how to connect to bootloader mode by pressing vol - and power button while turning on and connect the pc usb cable
now i need recovery.img but i tried it do not flash the firmwire it says system failure.
i need stock recovery.img and which update.app version so that i can make the phone work again
Hi there guys @ xda.
I need help with my mtk6572 phone which i bricked in a noob way.
I need help flashing it with SP Flash Tool which gives an error as described in title.
Here is how i bricked it.
Today i decided that i want to flash a custom recovery on my phone, so i did and it worked.
I experienced a bug on the recovery and decided i wanted to put the stoc recovery back.
I flashed it back and the recovery booted fine, wiped chache and did factory reset.
After i did that my phone got stuck on boot animation.
I then decided that it was a good idea to flash to complete stock rom back to my phone,
but chose the forma all + download option, so that the changes the custom recovery made
were deleted. Well, so i thought...
Right after the format i got an error that said that my firmware is not for my phone and failed.
Now if i try to format or download the stock rom (which i backed up from my device before flashing)
i get the error code in the title.
I tried uninstalling all the mtk drivers from my pc. When i connect my device it is picked up in device manager
as "unknown device", i then updated the drivers with mediatek preloader driver (and tried all the mtk drivers out there)
but the flash tool still gives the same error.
After i press the download button, and connect my phone, the bar at the bottom goes to 100%(red colour) then stays like that for 41 seconds.
Then it gives the error code and fails to flash.
I tried everything, from removing the battery, pressing vol+, vol-, power and all the combos in between, nothing.
If someone could help me unbrick my phone, i would be very greatfull.
P.S I have the stock rom backed up from my device .