Database Info

[ROM] Leaked early ICS for Lenovo Ideapad A1

There's been some discussion recently of the leaked ICS ROM for the Lenovo A1, which is a little difficult to install, because Clockworkmod won't flash it due to failed assertions. I've modified it so that it can be flashed through CWM.
Be warned that it will overwrite U-Boot, the kernel, and the RAMdisk (these are not usually backed up by CWM 5.0.2.7). If you've installed it, and you want to go back to your old backup (very likely as you'll soon get tired of nothing working properly), use the following steps:
1. Boot into recovery
2. Restore your backup using the normal CWM functionality
3. Install ub-fastboot.zip from this post.
4. Reboot into fastboot mode and restore the correct kernel and ramdisk for your ROM with:
Code:
fastboot flash inand-kernel <kernel>
fastboot flash inand-ramdisk <ramdisk>
5. Reboot.
If you don't know what the correct kernel/ramdisk is for your ROM then I'd advise you not to try using this ROM.
DISCLAIMER
There is no guarantee of anything going right if you install this ROM. I'll try and help with problems (and I'm sure other people will too) but if things get messed up it'll be your fault. Don't take the risk without understanding it and being comfortable with it.
Download: here.

So now you've flashed ICS to your A1, but you can't use it. Duh. Everything is broken right now.
For those scared of using ADB commands during a restore to CM7/Stock gingerbread... Here's the stock RAMDISKS, and Kernel as CWM .Zips... [Links taken from the other A1 threads, stock kernel .zip by yours truly. ;-) ] Flash ONLY the ones you need before you flash your Stock rom/CM7 rom/nandroid restore. In this order.
ROW 2375 / ROW 2525 builds ONLY RAMDISK
(1.){^^vv If you don't know which you're supposed to have, DO RESEARCH FIRST
ROW 2643 build only RAMDISK
(2.)Stock Kernel
(3.) Then Stock ROM/CM7 ROM (your choice) (skip step 2 if flashing a 4/28 or later CM7 build it includes a kernel.)
(4.)Fastboot bootloader mod
Click to expand...
Click to collapse
_________________________________________________________________________________________
Now if only we could get Wifi and USB working... That would be a decent start...
Weird part is, on the leaked one, the device name under settings is "Zoom2"
(haven't flashed this one yet, but I assume it's the same)
Makes me wonder if this is infact the real deal... or at least an attempt by a third party? (see post below)
Though it's nice to see it being possible.

monsieurtalbot said:
Weird part is, on the leaked one, the device name under settings is "xoom2"
(haven't flashed this one yet, but I assume it's the same)
Makes me wonder if this is infact the real deal... or at least an attempt by a third party?
Click to expand...
Click to collapse
It says "Zoom2" - that's an OMAP3 development kit that the hardware in the A1 is very similar to - they'll have started with the device-specific files for the Zoom2, and haven't bothered to change them yet. See http://www.omapworld.com/zoom.html

gmarkall said:
It says "Zoom2" - that's an OMAP3 development kit that the hardware in the A1 is very similar to - they'll have started with the device-specific files for the Zoom2, and haven't bothered to change them yet. See http://www.omapworld.com/zoom.html
Click to expand...
Click to collapse
...That explains it. haha "xoom". Typo. :-/

How to fix Wi-fi
Wi-fi work= ICS for daily use

dawkon13 said:
How to fix Wi-fi
Wi-fi work= ICS for daily use
Click to expand...
Click to collapse
It's not worth trying to fix with this ROM. It'd be better to work on a proper build of ICS instead of wasting time augmenting this early build.

Anyone trying this rom - can you take a look if /proc/config.gz exist and if so - make an upload. I'm just curious, but don't want to waste my time ....

Dear gmarkall, i flashed from CWM and it says installation aborted.. ! now i can't boot up to normal stock ROM ..
it stops in lenovo logo.. Pls ..

Tint Ag Khaing said:
Dear gmarkall, i flashed from CWM and it says installation aborted.. ! now i can't boot up to normal stock ROM ..
it stops in lenovo logo.. Pls ..
Click to expand...
Click to collapse
If you can still boot into recovery, flash an OTA zip file.
If you can't, then follow these instructions.

Brancaleone said:
Anyone trying this rom - can you take a look if /proc/config.gz exist and if so - make an upload. I'm just curious, but don't want to waste my time ....
Click to expand...
Click to collapse
I'm not running the ROM right now, but I tried extract-ikconfig on the kernel and it didn't find a config - I don't know how reliable that tool is though, since I've never used it before.

An update for the ICS ROM was posted in a German forum. Wifi is said to be working now. You can download it here. To use it, you need to flash the original ICS firmware (A107_.rar) and then install the update.zip with the stock recovery from an external sd card.

I've tested the update on my device. Wifi and sound output are working now. The build props show a Lenovo device now (ro.build.fingerprint=Lenovo/IdeaTab_A1107/A1107:4.0.4/MR1/eng.user.20120503.193509:eng/test-keys). The main issue seems to be that the Google Apps are not working (including Play).
EDIT: The problem with Google Play seems to be caused by the file permissions of drmserver. After this, I can download apps from Play Store (but only until rebooting):
Code:
adb remount
chmod 777 /system/bin/drmserver
./system/bin/drmserver&

Confirmed wifi works and sound works fine.
Google store not so much but looks to be a quick fix.
Gps seems to be working but haven't had time to test.
Mounting sd card and usb mounting are messed up.
Also for anyone considering this 4.03 they should know its based on a phones os and not a tablet os.

I can't update on 2GB A1 - there is an error in the middle of process.
The first version was running ok.

Pls!
Dear gmarkall,
I redownloaded and flashed again and now it's running OK.
Now from the above posts, i see that an update that fixes wifi and sound 's available to download again here.https://skydrive.live.com/?cid=56E49CF4B3C46641&id=56E49CF4B3C46641!106&action=Download
So pls tell me what i've to do again. Can i flash this update from CWM ?
Thanks !

Plaease help! Not work on IdeaPad A1 2GB

CWM log:
size:3833856assert failed: run_program("/tmp/fuse:, "mbr", "/tmp/mbr2GB.img")
E;Error in /sdcard/update.zip
(status 7)
Installation aborted
Can you help me?

This Update doesn't work with cwm and I wouldn't recommend to anyone flashing it. It screwed up my whole file system including rescue partition and took me several hours to get rid of it. On top, it doesn't contain config.gz.

If you are using CWM, you can go back to stock recovery in just a few minutes. It is described here. This shouldn't be an issue?

Clearly this is not a actually preview from lenovo but rather a home-brew that does a decent job of getting many things working.
The first preview had a tablet based 4.03 and this supposed update has a phone 4.03 layout.
Still not bad just not from lenovo.

STAR N9770 DUAL CORE MT6577/ulefone N9770.

This is a new thread for the star n9770 mt6577 Dual core.
ROOT
I have just used this method to safely root my star n9770 and worked perfect,it just wipes your time and date after root so just reset them and that's it.
you must follow instructions....
http://colonelzap.blogspot.co.uk/search?q=n9770
Thank you Rumpelstilzchen for that!
(does not seem to work with new 13/07 firmware but fine with earlier)do not try on devices running firmware later than 13/07/12 it will naff them

FIRMWARE STAR N9770 DUAL CORE MT6577/ulefone N9770.
STAR N9770 DUAL CORE MT6577/ulefone N9770.
CUSTOM RECOVERY
https://rapidshare.com/files/4163487113/STAR-N9770_Custom_Recovery.zip
CWM
https://rapidshare.com/files/3326837023/CWM-SuperSU-v0.93_tirannozaurus.zip
FLASHTOOLS AND DRIVERS
https://rapidshare.com/files/3354053184/FlashTools_driver.rar
FIRMWARE 13/07/2012 Thanks kylie 1965
https://rapidshare.com/files/2757089569/20120713_e1809c_v77_gq1008_9p017.N9770.zip
STOCK FIRMWARE 4.0.9
I have received this today from my supplier of device n9770 dual core
https://rapidshare.com/files/2825524946/欧乐风N9770-2012-0712.zip
http://www.mediafire.com/?eyci9chr527chu9 10/08/2012 latest for devices running 5647 firmware only
latest firmware N9770-20120725_e1809 c_v77_gq1008_5647.zip 25/07/2012
Will fix back camera issues due to additional sensors in device.
http://www.mediafire.com/?2fcalamvy7hvlyo
HOPE THESE HELP.
THIS IS ORIGINAL FIRMWARE FROM FIRST ISSUE AND IS OLD AS ARE THE ROOT EXPLOIT AS WAS FOR FIRST N9770 MADE.
NOW THERE ARE MANY MODELS CALLED N9770 SO PLEASE READ THREAD FOR MORE UPDATED FIRMWARE AND EXPLOITS ROOT ETC. ENSURE YOU MAKE A NOTE OF YOUR DEVICE FIRMWARE IN SETTING /ABOUT PHONE AND WRITE IT DOWN BEFORE YOU START FLASHING THE FIRST FIRMWARE YOU FIND.
ALWAYS BACKUP DEVICE

Thank you !
Do you know whats the differences between the both firmwares in your post are ?
My N9770 will not fall into Deep Sleep. It just clock the CPU down to 250mhz, but its still on and drains the battery within 12 hours.
I tried several ROMs i've found but all the same. Maybe your stock firmware solves the problem.

hardi75 said:
Thank you !
Do you know whats the differences between the both firmwares in your post are ?
My N9770 will not fall into Deep Sleep. It just clock the CPU down to 250mhz, but its still on and drains the battery within 12 hours.
I tried several ROMs i've found but all the same. Maybe your stock firmware solves the problem.
Click to expand...
Click to collapse
i have no idea but i have tried to install the stock firmware i got today but it wont happen,and flashed with the other firmware i got from kylie and its not good.
if you have any working roms i would seriously appreciate a link to some roms as my colours are washed out with the kylie firmware and stock need to be done in recovery but can not do it as wont have saying not signed?so i need a little help
ref battery you need to root and then set cpu to ondemand i use no frills cpu from play to do this

managed to sort out colour issue flashed with mdt and changed the grapics driver so the colour is good now but i have the problem that i started with which created all this hassle and that is the cameras...How do i swap from the front to back camera???
i dont have the little icon to change cameras.

sas007 said:
i have no idea but i have tried to install the stock firmware i got today but it wont happen,and flashed with the other firmware i got from kylie and its not good.
if you have any working roms i would seriously appreciate a link to some roms as my colours are washed out with the kylie firmware and stock need to be done in recovery but can not do it as wont have saying not signed?so i need a little help
ref battery you need to root and then set cpu to ondemand i use no frills cpu from play to do this
Click to expand...
Click to collapse
I tried out this Taiwan101 ROM, this one from a russian forum (25/07?) and this one from a chinese forum (newer Taiwan?).
I also had the issue with these strange colors, its the wrong display driver. I fixed it with SP_MDT by selecting RX_50NT_401B as display driver. It seems that these ROMs had all RX_50NT_365A as default which end up in wrong colors.
With the 25/07 Firmware i also killed my cameras, should also be fixable with the correct drivers.
This 'not signed' error appears also with custom recovery ?

yep i can not get the back camera to work/switch, going to try your later rom is it rooted?
How do i install these roms?the later newer Taiwan as i am not used to dual core,do you copy zip to sd card (internal) and go to recovery and update via sd card?
and how would you change the display driver if not flashing via tools
Did you ever have the cameras working as they should?
100 questions.......
hope we can get there in the end

sas007 said:
How do i install these roms?the later newer Taiwan as i am not used to dual core,do you copy zip to sd card (internal) and go to recovery and update via sd card?
Click to expand...
Click to collapse
Yes exactly, you had to copy the file to the sd card and flash it via recovery. But you had to install a custom recovery first (i flashed only the recovery. Flashing also the boot.img and the preloader out of this zip ended with a not booting phone.
sas007 said:
and how would you change the display driver if not flashing via tools
Click to expand...
Click to collapse
I flashed the driver with tools. Not the hole ROM, just the uboot.bin. It seems that sp_mdt saves the driver in uboot when you close the programm. I did so and flashed the uboot with the 'normal' flashtool.
sas007 said:
Did you ever have the cameras working as they should?
Click to expand...
Click to collapse
Both cameras survived every change of firmware until i flashed the 25/7 ROM.
It seems that there are several hardware version. With the Taiwan101 firmwares the external sd card will not be recognized. I flashed the boot.img from the 13/07 firmware and the sd card came back. SD card is also out of function with your stock rom.
I still had the problem with phone not going into deep sleep. Also NoFrills couldn't change that. Maybe i've not found the right ROM for my hardware yet. I got it from CECT.

Hi i have flashed with the firmware from kylie and changed the display driver whilst flashing with mdt..display is good
I do not have back camera i see no way to switch to back but the front works fine and i have no idea as when i flashed with default driver it was the same no back camera
I do have external SD no problem with 32gb
I had no problems with imei
i need a recovery to flash
found these
http://translate.google.com/transla...um.china-iphone.ru/viewtopic.php?f=70&t=21147
http://translate.google.com/transla...um.china-iphone.ru/viewtopic.php?f=70&t=21147
but no help to me
The root tutorial posted here does not work with new firmware,so i copied recovery image from custom recovery (brunos)and replaced recovery in new firmware and flashed using mdt with the driver change for graphics..it worked and installed custom recovery and i then proceeded to root with the cwm-su zip in recovery and it worked.
but still no back camera

Cameras and display are working now with these drivers selected in sp_mdt :
mt9p017_raw hi704_yuv RX_50NT_401B
Which display driver have you choosen ? The same ?

hardi75 said:
Cameras and display are working now with these drivers selected in sp_mdt :
mt9p017_raw hi704_yuv RX_50NT_401B
Which display driver have you choosen ? The same ?
Click to expand...
Click to collapse
yes i used the same settings but still no back camera and other non stock camera apps will not work
i am uploading the modified firmware with these settings in the uboot and with the custom recovery in so can be straight flashed in one go.

sas007 said:
yes i used the same settings but still no back camera and other non stock camera apps will not work
i am uploading the modified firmware with these settings in the uboot and with the custom recovery in so can be straight flashed in one go.
Click to expand...
Click to collapse
You have tested all possible drivers ? Did the second camera work befor flashing ?
I changed the driver and bootet into system test (power+vol. down) to see if the cams are back or not. Its a bit faster than waiting for android to boot completely.

hardi75 said:
you have tested all possible drivers ? Did the second camera work befor flashing ?
I changed the driver and bootet into system test (power+vol. Down) to see if the cams are back or not. Its a bit faster than waiting for android to boot completely.
Click to expand...
Click to collapse
hi ran the test and main camera is fail...great back it goes

sas007 said:
hi ran the test and main camera is fail...great back it goes
Click to expand...
Click to collapse
Maybe I could try note firmware. I have used same settings for drivers with the same firmware as you but the main camera still dead. Strange.
how do you get the stock firmware signed,i wish i could use it as may hold the key
Sent from my ONDA MID using xda premium

N9770 topic

sas007 said:
I have used same settings for drivers with the same firmware as you but the main camera still dead. Strange.
how do you get the stock firmware signed,i wish i could use it as may hold the key
Click to expand...
Click to collapse
I've not used the 13/07 version u posted, i got it from this link. Should be se same but who knows. Maybe released
You have flashed the custom recovery which you have posted on the first page ? I got these not signed errors only with stock recovery.

hardi75 said:
I've not used the 13/07 version u posted, i got it from this link. Should be se same but who knows. Maybe released
You have flashed the custom recovery which you have posted on the first page ? I got these not signed errors only with stock recovery.
Click to expand...
Click to collapse
Hi used your firmware link outcome the same no camera so i flashed taiwans rom still no back camera,used uboot from n8000 has the correct drivers for cameras but not display...uboot from i9220 has wrong drivers as has the uboot from note.
used the firmware sent to me by supplier renamed it update zip and installed over taiwans rom and still no back camera.
was getting error "can not connect to camera" several times through out the process,have called it a day and am returning device..

Repartition N9770
Has anyone come out with the 2.5g repartition yet??

Try clearing your cache and removing your battery. Then, install any free basic new Jellybean cam app from the market. See if that re-installs your camera.
sas007 said:
Hi used your firmware link outcome the same no camera so i flashed taiwans rom still no back camera,used uboot from n8000 has the correct drivers for cameras but not display...uboot from i9220 has wrong drivers as has the uboot from note.
used the firmware sent to me by supplier renamed it update zip and installed over taiwans rom and still no back camera.
was getting error "can not connect to camera" several times through out the process,have called it a day and am returning device..
Click to expand...
Click to collapse

ronbo76 said:
Try clearing your cache and removing your battery. Then, install any free basic new Jellybean cam app from the market. See if that re-installs your camera.
Click to expand...
Click to collapse
Hi and thanks for your suggestion i had already tried that with 3-4 different apps,all stated they could not connect to camera,for me it is a hardware fault as i have done everything humanly possible to resolve.i have now returned device and await a new one.
having talked with china supplier the n9770 has a lot of problems and was released to market to early..most of the models sent out have been recalled due to major faults and they said it wont be until middle of September before the chipset mt6577 is back,whether there is any truth in that i do not know..but they had no replacement for me and have already issued a full refund and postage costs on emailing proof of postage so they seem honest....ummm
Cheers

Prestigio pmp5670c

Hello. i want to ask if someone have Clockwork mod or some custom firmware on Prestigio PMP5670c Android 4.1.1.
I managed to root it, but i realy dont like this Android version and Prestigio is not intrested in upgrading.

Hey can someone make a recovery for this tablet.
Sent from my PMP5670C_DUO using xda premium

Shawes said:
Hello. i want to ask if someone have Clockwork mod or some custom firmware on Prestigio PMP5670c Android 4.1.1.
I managed to root it, but i realy dont like this Android version and Prestigio is not intrested in upgrading.
Click to expand...
Click to collapse
I started to do some work on that tabled, but stuck with kernel touchscreen configuration. See here.
Touch chip is Goodix GT911, screen size is 800x1280 px. I managed to get touch working but partialls. First aprox 1.2 inches of top of screen are not responsive to to touches. After that 1.5" touch works normally.
I'm pretty sure I'm sending wrong configuration data array to chip and thats why its not working as it should, but have no time at the moment to toy with it. If anyone experienced with Goodix chips, pm me with ideas...

stane1983 said:
I started to do some work on that tabled, but stuck with kernel touchscreen configuration. See here.
Touch chip is Goodix GT911, screen size is 800x1280 px. I managed to get touch working but partialls. First aprox 1.2 inches of top of screen are not responsive to to touches. After that 1.5" touch works normally.
I'm pretty sure I'm sending wrong configuration data array to chip and thats why its not working as it should, but have no time at the moment to toy with it. If anyone experienced with Goodix chips, pm me with ideas...
Click to expand...
Click to collapse
Update: I started to toy with stock kernel and cm10.2 (my first CM ever, was working with AOSP based SoC manufacturers sources). Problem is that device uses separate partition for internal sdcard, so have to disable emulated storage.
Things done:
- recovery
- android is built against precompiled stock kernel
Status:
- after bootanim and starting apps screen android reboots and starts back with bootanim. This was one day tryout, will debug it later today. Thanx to TeamNostalgia's preparation for cm10.2 on Amlogic MX. I used their framework and device stuff, upgraded with latest amlogic version of sources. Because of SLA I have with Amlogic, I cannot put it online.

any news abouth root final this tablet?
thx for info

stane1983 said:
I started to do some work on that tabled, but stuck with kernel touchscreen configuration. See here.
Click to expand...
Click to collapse
klobasica said:
any news abouth root final this tablet?
thx for info
Click to expand...
Click to collapse
On the link abouve is posted rooted stock firmware (mine post). To lazy ones click here

no, no...sorry i mean custom rom if is posable to create for this tablet...

klobasica said:
no, no...sorry i mean custom rom if is posable to create for this tablet...
Click to expand...
Click to collapse
It is. I'm not CM guy really, but its possible. If anyone interested, TeamNostalgia's github does have decent tree for Amlogic MXS tablets. I did some CM10.2 work for that tablet, but ended up with bootloop and reboot eventually. Didn't had time do debug it.

Here 4pda.ru/forum/index.php?showtopic=504411&view=findpost&p=29560411 is a customized firmware from Prestigio PMP3970B to work on Prestigio PMP5670C. But it does not run on PMP5670C, stands on the splash screen. Maybe someone will take to complete the firmware, it is better factory firmware for the tablet PMP5670C

ksh2000 said:
Here 4pda.ru/forum/index.php?showtopic=504411&view=findpost&p=29560411 is a customized firmware from Prestigio PMP3970B to work on Prestigio PMP5670C. But it does not run on PMP5670C, stands on the splash screen. Maybe someone will take to complete the firmware, it is better factory firmware for the tablet PMP5670C
Click to expand...
Click to collapse
I fixed U-Boot (wrote my own to support device tree kernel - 3.10.10) and fixed touch screen. I did not upload this fw, started to work yesterday on amlogic's 4.4 sources (they support both mx and m8 chipsets) (no, I cant share, I have SLA with them), I have boot, only left few things to test and then I'll upload 4.4.2.

Thank you for keep working! Waiting for rom)
Sent from my GT-I5510 using xda app-developers app

cyanodeff said:
Thank you for keep working! Waiting for rom)
Sent from my GT-I5510 using xda app-developers app
Click to expand...
Click to collapse
Here's beta version of rom: http://www.stane1983.com/prestigio_pmp5670c/
Read install instructions, needs to be installed twice, uboot still not perfect. Waiting for feedback
Btw, it's 4.2.2 rom, KitKat doesn't work good (unstable) on MXS chip.

Installed today morning. Seems all good! Thank you very much
Sent from my GT-I5510 using Tapatalk 2

babicsbalu said:
Unfortunatelly I can not able to install it because the second install is freezing all the time, now I can not install official 1.0.0.5 ROM, it stucked during the installation.
Click to expand...
Click to collapse
Rename uImage_recovery to recovery.img (when installing back stock firmware).

babicsbalu said:
Now I successfully installed the 1.0.05 but there is a quite big issue: I can not able to install anything from Play, the Download Manager is acutally (lots of system apps too) 0.0kb
Click to expand...
Click to collapse
I'm really sorry for inconveniences. With 1.0.05 files on sdcard, delete factory_update_param.aml file and boot into recovery (as if you want to install firmware). From menu using vol +/- and power for select choose factory reset (data partition is not formatted using old partition layout, thats why you have 0kb). After that you also can reflash firmware if you want (just select zip from sdcard).

stane1983 said:
Here's beta version of rom: http://www.stane1983.com/prestigio_pmp5670c/
Read install instructions, needs to be installed twice, uboot still not perfect. Waiting for feedback
Btw, it's 4.2.2 rom, KitKat doesn't work good (unstable) on MXS chip.
Click to expand...
Click to collapse
My daughter get this tablet from her grandfather on 03.05.2014 ( I guess she is lucky about that date ), and it was so slow and ugly and everything.
I installed your bety rom and everything is perfect. BUt after first reboot i get setup wizard again, but the first time after Install I only get FC ( just like I should ) but it didnt throw me back to setup wizard again.
Can I expect wizard setup every time I reboot or?
And Yes, thank you a lot for this awesome and fast work. The tablet is now so much more usable.
HVALA TI STANE MNOGO => THANK YOU STANE A LOT

@stane1983 I have the same problem as @babicsbalu. My pmp5670c is also stuck at black screen after rebooting and installing new stock firmware. I did both, renaming from uImage_recovery to recovery.img and deleting factory_update_param.aml and every time with the same result.
Please help me!
Or you can PM me (I'm from Croatia)
Hvala ti!

Well I also have prestigio tablet pmp5670C_BK_DUO and within a week it got bricked somehow. I guess that broken charging pin on cable had something to do with it - probably did a short circuit or something and boot loader got corrupt. Tabled was responding to connection of new charging cable, but only backlight turned on. There was no logo or anything.
I browsed several pages and nothing worked. I tried with official upgrade from SD card but it didn't work. It started to upgrade, android-upgrade logo came up, but after reboot nothing happened. Damaged bootloader was unable to start the tablet.
After a day or so I finally found a way how to unbrick it! Yeah.... So in attached file there is the detailed procedure, which I found on some Russian page.
Good luck!

Recovery.rar no longer available
imarkic said:
Well I also have prestigio tablet pmp5670C_BK_DUO and within a week it got bricked somehow. I guess that broken charging pin on cable had something to do with it - probably did a short circuit or something and boot loader got corrupt. Tabled was responding to connection of new charging cable, but only backlight turned on. There was no logo or anything.
I browsed several pages and nothing worked. I tried with official upgrade from SD card but it didn't work. It started to upgrade, android-upgrade logo came up, but after reboot nothing happened. Damaged bootloader was unable to start the tablet.
After a day or so I finally found a way how to unbrick it! Yeah.... So in attached file there is the detailed procedure, which I found on some Russian page.
Good luck!
Click to expand...
Click to collapse
I had a similar problem here and this method seems promising, but the recovery file indicated on the PDF is no longer available. Would you still have it lying around somewhere?
Thank you!!

PMP5670c Duo
I got this tablet 2 month ago, i have found on w w w 4pda ru 4 custom rooms for this tablet and i used google chrome to translate in english to understand what i have to do, i have instaled every one rom but i got a problem, with all custom rom the internal storage disapear. I instaled stock version now and the internal storage is there ready to be used. Custom roms are better than stock rom but it's annoyng me the missing internal storage. Anyone with this problem or anyone know how to fix it?
Edit: I instaled stock rom then i instaled again Firmware v.1.0.10 from MrCheba Repack and now i have internal storage working maybe reinstall the stock rom fix it.

Another Bricked/stuck in bootloop device, please maybe somebody knows how to solve it?

Hi Guys, I bought a second hand 10 Ultra that had the EU ROM version 12.10. Battery life, everything was perfect. EXCEPT the camera! And the camera was THE only reason to buy this phone. Horrible photos, a lot of smear and haze when a light source was in the picture, like a light bulb, computer screen, almost unusable. So after reading that the chinese ROM can fix the issue I've used Xiomiflash and installed the latest official CN ROM : https://xiaomirom.com/en/download/mi-10-ultra-cas-weekly-V13.0.0.1.1.DEV/ . Fantastic photos, great camera overall but many bugs concerning all the apps installed via Google Play. no real time notifications, gmail interface very laggy , an important battery drain (10% overnight as with EU Rom was 1-2%).
So I have decided to go back. I have download and tried to install an EU ROM, it installed something but froze halfway and after a few hours I stopped the program.
Tried again and no luck, now I get the error message "anti rollback check error". I have google it, ran the cmd I have a code 1 in the phone.
On youtube there is a fix to that and all the comments are positive, so I opened the "bat" file in a txt editor and deleted the first lines about the rollback check.
Open the EU ROM with Xiaomiflash and It started to work but froze again after 10'-20' for hours.
So for the time being I think I have a bricked phone that starts with a bootloop, I can get in into the chinese recovery but using that it gets it again in the bootloop, I tbelieve that it"s booting into a corrupted ROM.
I have found this tool from XIAOMI http://zhushou.xiaomi.com/ but it's all in chinese, I have tried with a camera translator app on another phone but it's just impossible to translate.
I really really hope I can still get it back to work! Ideally with an EU rom, a 12.5 version, if downgrading it's impossible then again with the version13 beta CN ROM that worked.
Anyone any idea?
To resume evrything: Phone worked with EU ROM 12.5 - Used xiomiflash - wipe evrything- installed CN rom v13 - wipe evrything /tried to reinstall EU ROM v12.5- roll back error -stuck - wipe everything/tried to reinstall the same CN ROM V13- stuck halfway - Phone in bootloop/ fastboot -can access recovery mode that doesn't help.
I know it's long but I spent 2 full days and evenings trying to solve it :-(
Many many thanks in advance !

Hey, have you tried reinstalling using fastboot? basically start flashing from scratch. and stick to using only weekly or stable rom.

Stock camera app not working

Hello,
I got a big issue on my Mi 10 Ultra, the stock camera is not wanting to work anymore.
It's black only and then refuses to launch (see screenshot attached).
I've tried third party apps but quality is not as good and I can't use all the camera modules. I've bought the 10 Ultra for it's cameras and really want to keep using it. (I do a lot of macrophotography and the 10 Ultra is amazing for this but only on the wide angle module.)
Did someone encountered the same issue ?
I've tried installing GCam but I do not managed to install apks. Theres an issue during the package analysis... (I've tried all GCam apks I could find here.)
I'm on stock EU OS with TWRP and I just activated root to try to solve the issue.
Sorry for bad english and french screenshots
EDIT: Every camera is working in the CIT hardware tests, I think it's software but I resetted the phone and nothing changed.

loupyes said:
Hello,
I got a big issue on my Mi 10 Ultra, the stock camera is not wanting to work anymore.
It's black only and then refuses to launch (see screenshot attached).
I've tried third party apps but quality is not as good and I can't use all the camera modules. I've bought the 10 Ultra for it's cameras and really want to keep using it. (I do a lot of macrophotography and the 10 Ultra is amazing for this but only on the wide angle module.)
Did someone encountered the same issue ?
I've tried installing GCam but I do not managed to install apks. Theres an issue during the package analysis... (I've tried all GCam apks I could find here.)
I'm on stock EU OS with TWRP and I just activated root to try to solve the issue.
Sorry for bad english and french screenshots
EDIT: Every camera is working in the CIT hardware tests, I think it's software but I resetted the phone and nothing changed.
Click to expand...
Click to collapse
stock EU OS ?
you mean Xiaomi Eu ROM?
If the code name is CAS,there are chinesse firmware only.
maybe try that
Use this tool https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
Unroot before and dont relock the bootloader.

Thanks for the answer
NOSS8 said:
stock EU OS ?
you mean Xiaomi Eu ROM?
If the code name is CAS,there are chinesse firmware only.
Click to expand...
Click to collapse
I got the Xiaomi.EU ROM as it was shipped with. It has a TWRP recovery from when I rooted it and got Magisk installed.
My MIUI 12 version is V12.0.15.0.QJJCNXM (stable).
Use this tool https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
Unroot before and dont relock the bootloader.
Click to expand...
Click to collapse
I understand this is a tutorial to change my ROM, which is not what I'm searching for as the ROM works really well. Plus I only see the CAS on this thread's links which is the chinese ROM.
Not sure what you meant.
My bootloader was locked all the time, I just unlocked it during my testing but it did not change anything.

loupyes said:
Thanks for the answer
I got the Xiaomi.EU ROM as it was shipped with. It has a TWRP recovery from when I rooted it and got Magisk installed.
My MIUI 12 version is V12.0.15.0.QJJCNXM (stable).
I understand this is a tutorial to change my ROM, which is not what I'm searching for as the ROM works really well. Plus I only see the CAS on this thread's links which is the chinese ROM.
Not sure what you meant.
My bootloader was locked all the time, I just unlocked it during my testing but it did not change anything.
Click to expand...
Click to collapse
My MIUI 12 version is V12.0.15.0.QJJCNXM=chinesse version
With this tool you will make a complete installation not like with the Twrp and can be recovered your the camera.
https://xiaomifirmwareupdater.com/miui/cas/stable/V12.0.15.0.QJJCNXM/

NOSS8 said:
My MIUI 12 version is V12.0.15.0.QJJCNXM=chinesse version
With this tool you will make a complete installation not like with the Twrp and can be recovered your the camera.
https://xiaomifirmwareupdater.com/miui/cas/stable/V12.0.15.0.QJJCNXM/
Click to expand...
Click to collapse
Now in the tests, my 5x telephoto camera does not respond, so I think it's an hardware issue, but I don't think the camera is broken so I'd like to found people with the same experience.
I don't think changing the recovery will solve the problem.
Plus I like having TWRP

loupyes said:
Now in the tests, my 5x telephoto camera does not respond, so I think it's an hardware issue, but I don't think the camera is broken so I'd like to found people with the same experience.
I don't think changing the recovery will solve the problem.
Plus I like having TWRP
Click to expand...
Click to collapse
Flash this rom to be sure
Mi 10 Ultra ChinaStableFastbootV13.0.4.0.SJJCNXM

Just to be sure of something, I did a test. Thanks for answering all my messages but what I need and want now is info or a way to debunk the issue.
I wont flash a ROM in a language I don't understand on the phone I use every day just to test something.
I already tried resetting the phone (including dalvik cache iirc) and it did not change anything.
Plus I would need a PC and a flashing tool, this would take a lot of time...
Finally, the issue did not came with a ROM change, the actual ROM is stable.

Edit : I changed the camera module, everything works perfectly
According to my repair shop, Xiaomis are just unreliable.