Related
Hey guys,
Have had my Honor 6 H60-L02 FDD-LTE for little under 4 hours now
Already unlocked the bootloader and flashed CWM V.6.0.5.1
I installed the MIUI v4.9.6 Rom and i don't really like it, it keeps coming up saying com.android.phone has stopped, and when you update to v4.12 it gets stuck in a boot loop
So I don't think MIUI is very stable for the phone, and I want to install EMUI v3.0 (This isn't lollipop yet is it?)
Long story short, I figure i have to reflash the stock recovery firmware because CWM wont install an Update.App file
I downloaded the Honor 6 Multitool
When i get to install recovery, i choose my honor 6 model then it asks for EMUI 2.3 or 3.0, i tried all the 3.0's and they dont load the recovery, just go back into android
so i tried some of the EMUI 2.3's, i have no idea what each number at the end represent and which one suits my phone... i.e B118SP02?
So that is what stage im at, i have MIUI v4.9.6 with CWM V.6.0.5.1
And i am trying to install EMUI v3.0 stable
Any help would be pretty awesome, can say im slightly disappointed with the availability of roms for this phone, but hopefully this will change in the future
Ok ...
i will start from beginning , i will tell you how to get the last stable update for your phone .
witch is B310【EMUI3.0_Android4.4】.
First Download it from here it's 1GB .
or from here (you should translate it first and click on stable and download) .
Second continue with this link .
Attention : Do step 6 before 5 .
Or go to
http://forum.xda-developers.com/showpost.php?p=57274153&postcount=1
scroll down to: 3 Button Restore not working (If you change between variant example L02>L12) Or Partition been changes and cannot restore back Stock version. Use this steps below : -
Links to the revert package etc are in the post too
Tried Myahyam's method and now the phone is stuck in a boot loop (shows the honor, powered by android splash, goes black then repeats the splash)
need to unbrick the damn thing now
im following the honor 6 multitools unbrick method, its in fastboot transfering files now, will report back when its done.
Just out of curiosity, besides MIUI and EMUI, what other roms are available to flash using CWM or TWRP?
Okay, managed to get CWM back on and sideload the MIUI4 rom again, just to prove to myself that I didn't brick my phone, so that parts all good!
I will have to try your method another time Julsen, i fly out on a 3 week holiday tomorrow morning, and want to load some games and movies to the phone to watch on the plane.
Hopefully when I come back in 3 weeks, there will be a better choice of roms to install using CWM/TWRK
If not, I will attempt your method Julsen, at least i now know how to fix any softboot/bootloop problems, good learning experience all up!
Here u will find couple of custom roms flashable via cwm
http://bbs.anzhi.com/forum.php?mod=forumdisplay&fid=1387&filter=typeid&typeid=15409&mobile=no
Sent from my H60-L02 using Tapatalk
Help me please!
I am having exactly the same problem that serpent is having.
Did any1 found solution?
Hey all, back from my 3 week trip
@nrpetonr i went to that site and grabbed two roms to flash using CWM, they both seem to put it into a boot loop
This phone is strange really, ever since i have unlocked the bootloader and put on a custom rom, its been the only rom that has worked, the rest all put me into a bootloop
Maybe i should try TWRP instead
Hello
I use a ROM with XT897 CM10.2.1 and SIM MOD CornholioGSM since July 2014, it was working fine.
I flashed the ROM-cm-SNAPSHOT-YOG4PAO23E 12.1-20150901-xt897 (RELEASE) one month ago and the ROM worked well. A week ago, the phone was much slower, I turn off reboot and since it constantly!
I made the following transactions with TWRP:
- Reset factory
- Flash ROM (cm 12.1-20150901-SNAPSHOT-YOG4PAO23E-xt897)
- Flash ROM (BlissPop-v4.0.1-xt897-OFFICIAL-20150917-1514)
- Flash recovery (cm 12.1-20150901-SNAPSHOT-YOG4PAO23E-xt897-recovery.img)
- Flash TWRP
- Flash ROM (cm 12.1-20151007-SNAPSHOT-YOG4PAO339-xt897)
Always the same, I have the boot logo and the logo of the ROM and the phone reboots.
The ROM (CM12.1) has started once and then restart the phone has rebooted repeatedly.
I tried with or without a SIM card.
I do not understand where does the problem, can you help me?
Well not having the phone in front of me, I don't really quite understand the issue myself - however, I would suggest using RSD Lite and one of the FXZ files to flash everything (including recovery) back to stock.
If you still have issues, there is a bigger problem (likely hardware failure).
Hello
sorry if my explanation was not clear.
I added a photo which shows the two steps in the operation of my phone.
Step 1: Start the phone .
Step 2 : boot ROM CM12
The Step 2 lasts 23 seconds then return to Step 1 and Step 2 and Step 1, Step 2 infinitely .
I hope this is understandable .
I read on the forum that used some RSD Lite but as I had not used for the ROM installation, I did not understand why use .
I'm a new user, i can't post picture, I send link by PM, thanks.
I thought my last post made it clear what purpose RSD Lite and the FXZ files are - they restore the phone to stock completely - ROM, recovery, everything will be reset to when it was stock from the factory (granted it may be a newer image than what shipped on the phone, but you get the point).
Again, as I stated previously, if you still have issues after flashing everything stock your issue is likely not software, but hardware.
I searched the forum about RSD Lite. Now I understand its usefulness.
I used RSD Lite to flash the ROM asanti_c_sprint-user-4.1.2-9.8.2Q-122_XT897_FFW-5-6-release-keys-cid9.xml.zip
My phone had with SPRINT .
The flash went well but unfortunately I still have the same problem :
Step 1: unlocked bootloader screen
Step 2: The red M MOTOROLA
Step 1, Step 2 , .....
Is there another test or I can consider it a hardware problem ?
Hardware problem can come out of the MODSIM ? I use a SIM card in the phone for 16 months.
Nicolas.636 said:
I searched the forum about RSD Lite. Now I understand its usefulness.
I used RSD Lite to flash the ROM asanti_c_sprint-user-4.1.2-9.8.2Q-122_XT897_FFW-5-6-release-keys-cid9.xml.zip
My phone had with SPRINT .
The flash went well but unfortunately I still have the same problem :
Step 1: unlocked bootloader screen
Step 2: The red M MOTOROLA
Step 1, Step 2 , .....
Is there another test or I can consider it a hardware problem ?
Hardware problem can come out of the MODSIM ? I use a SIM card in the phone for 16 months.
Click to expand...
Click to collapse
The hardware issue is likely not related to the SIM modification. As to what exactly has failed, I'm not sure... perhaps the NAND or something else memory related.
Aouch aouch...
Thank you for your help.
I think it remains for me to search for a motherboard for photon Q.
Long life in the forum!
Use "borrowed" TWRP recovery image.
Nicolas.636 said:
Hello
I use a ROM with XT897 CM10.2.1 and SIM MOD CornholioGSM since July 2014, it was working fine.
I flashed the ROM-cm-SNAPSHOT-YOG4PAO23E 12.1-20150901-xt897 (RELEASE) one month ago and the ROM worked well. A week ago, the phone was much slower, I turn off reboot and since it constantly!
I made the following transactions with TWRP:
- Reset factory
- Flash ROM (cm 12.1-20150901-SNAPSHOT-YOG4PAO23E-xt897)
- Flash ROM (BlissPop-v4.0.1-xt897-OFFICIAL-20150917-1514)
- Flash recovery (cm 12.1-20150901-SNAPSHOT-YOG4PAO23E-xt897-recovery.img)
- Flash TWRP
- Flash ROM (cm 12.1-20151007-SNAPSHOT-YOG4PAO339-xt897)
Always the same, I have the boot logo and the logo of the ROM and the phone reboots.
The ROM (CM12.1) has started once and then restart the phone has rebooted repeatedly.
I tried with or without a SIM card.
I do not understand where does the problem, can you help me?
Click to expand...
Click to collapse
I had a similar incident a few days ago. I have a hard time stopping myself from pushing the limits. Usually I stop when it's broken. I tried RSD Lite, SDB sideload/ flash, zip install from recovery, fastboot(mine's dead), all with no luck.
Any how, If you have CWM, temporarily change to TWRP. If you already have TWRP it's easier.
XDA has a TWRP recovery image in the forum. Put that in your sdcard (I had to paste it from my computer because my xt897 was soft bricked). Flash from TWRP.
Worked fom me. got my phone back after 1 week of flashing everything and then some.
Good luck.
http://forum.xda-developers.com/showthread.php?t=2295643
http://forum.xda-developers.com/showthread.php?t=2295643&page=2
Hello
thank you for this new information.
I tried it and it worked with the ROM [PQ_ICS-Stock] but only with that one!
I tried the ROM [PQ_JB-421] , several Cyanogen ROM but still the same looping boot problem.
I tried several version of TRWP without success .
I do not understand why my Photon Q only works with this ROM [PQ_ICS-Stock] .
Is still a motherboard problem ?
Hello everyone
I'm going crazy !
As I had not managed to solve my problem, I ordered a mainboard on ebay.
Today I realized the SIMMOD on this new board.
when I restarted phone the same startup problems with the ROM SPRINT !
I unlocked the bootloader .
I installed TWRP 2.7.1.2
I installed CM12.1-20151219 - NIGHTLY - XT897
Still the same problem starting loop.
Someone an idea ?
Nicolas.636 said:
Hello everyone
I'm going crazy !
As I had not managed to solve my problem, I ordered a mainboard on ebay.
Today I realized the SIMMOD on this new board.
when I restarted phone the same startup problems with the ROM SPRINT !
I unlocked the bootloader .
I installed TWRP 2.7.1.2
I installed CM12.1-20151219 - NIGHTLY - XT897
Still the same problem starting loop.
Someone an idea ?
Click to expand...
Click to collapse
If you can't RSD Lite, something is up. Either you are not doing the process correctly, or there is something wrong with the device (still).
Perhaps you were always on ICS and never made the official jump to JB? You say you can RSD Lite to an ICS version, just not a JB version? So 4.0.x works but 4.1.x does not?
Again I'm talking stock. If stock doesn't work, I wouldn't even attempt CM. Start with the basics, then work your way towards the aftermarket.
I agree that if the stock rom does not work after the installation with RSD Lite is that it remains something (software) .
The first motherboard I used 12.1 CM for several months it is that the phone supports android 5.1
I agree that it must abort running a stock ROM before flashing a ROM CM. But the ICS ROM STOCK works!
It is possible that I did not do the process correctly .
What surprises me is that the second board had the same problem with the ROM SPRINT !
I will do other tests.
Nicolas.636 said:
What surprises me is that the second board had the same problem with the ROM SPRINT !
Click to expand...
Click to collapse
This is the part that makes me think you are perhaps missing some step in the process somewhere.
Can you RSD Lite to ICS? Not flash it with TWRP. If that is successful, try to RSD Lite to the latest JB again.
I modified the second motherboard ( mod sim card ) and I started the phone with the ROM SPRINT and I got the boot problem repeatedly.
the common point of two motherboards is that they both have a bad ESN .
I will do other tests.
Nicolas.636 said:
I modified the second motherboard ( mod sim card ) and I started the phone with the ROM SPRINT and I got the boot problem repeatedly.
the common point of two motherboards is that they both have a bad ESN .
I will do other tests.
Click to expand...
Click to collapse
Bad ESN shouldn't prevent booting... it would prevent you from activating the device on the Sprint network, but I would imagine you don't care about that...
arrrghhh said:
it would prevent you from activating the device on the Sprint network, but I would imagine you don't care about that...
Click to expand...
Click to collapse
yes
I used RSD Lite 6.1.6 for flashing the ROM [ 2014-03-09 - TSv2 ] but the process has blocked after the flash.
Here is what I did :
1- run RSD Lite
2- Start the phone in FASTBOOT mode.
3- usb phone connection to PC
4- opening of the ROM [ 2014-03-09 - TSv2 ] and "uncompress and start flashing"
5- flash goes well
6- the phone reboots => Logo M red => telephone reboot => Logo M red => again ....
7- RSD Lite waits for the restart ... [ it waits again, LOL ]
8- I turned off the phone and I unplugged.
9- I turned on the phone who start properly, I arrived at the language selection screen .
The ROM is an android version 4.0.4 , I think you know this ROM .
Why the process with RSD Lite has blocked the phone to reboot ?
That's what I did wrong in the process?
I have read many forum post, I tried several methods but only in the ROM 4.0.4 STOCK work. Flashed with RSD lite or restoration of a backup with TWRP.
I have the bootloop problem using RSD Lite 6.2.4 for ROM 4.1.2 CSPIRE or ROM 4.1.2 SPRINT. No error message of RSD lite. No error message of phone.
I've modified the XML file but it changed nothing.
Same problem using TRWP with custom ROM or restoration of a backup ROM4.1.2 JB.
Same problem using OPEN RECOVERY 209 with custom ROM.
Where is the problem ?
I would use CM12 ROM.
Nicolas.636 said:
I have read many forum post, I tried several methods but only in the ROM 4.0.4 STOCK work. Flashed with RSD lite or restoration of a backup with TWRP.
I have the bootloop problem using RSD Lite 6.2.4 for ROM 4.1.2 CSPIRE or ROM 4.1.2 SPRINT. No error message of RSD lite. No error message of phone.
I've modified the XML file but it changed nothing.
Same problem using TRWP with custom ROM or restoration of a backup ROM4.1.2 JB.
Same problem using OPEN RECOVERY 209 with custom ROM.
Where is the problem ?
I would use CM12 ROM.
Click to expand...
Click to collapse
Without having the device in my hands, it's hard to say for sure. The only difference I can see you are doing differently from me is using a newer version of RSD. I doubt that would be an issue, but may want to try other RSD versions.
In the end, I suppose if 4.0.4 works, use that...
Thank you for you help.
I'll buy a other PHOTON Q on EBAY.
I do other test with the new PHOTON Q.
Hello
I received my new q photon.
It is version 4.1.2
I unlocked the bootloader .
I made a backup with TWRP and OPEN_RECOVERY_209 .
I tried an installation of 3 different ROM but I have an error message !
I do not understand where does the problem ?!
Is this a bad version of TWRP or ROM ?
here is alternative rom for Vowney maybe someone can build it.
I flashed this rom for Vowney its work but name of telefon changed to Hasee.... its have to be changed in build prop.
and its only english and chinese language
How to flash
1-download Rom Vowney and Hasee rom
2- entpack both roms and delete system and userdata img from vowney rom
3-take only sytem and user data img files from Hasee rom put in to vowney rom
if you want change also boot logo take also logo.bin from Hasse rom put in to Vowney rom
4- Hasee rom file download-------http://www.needrom.com/wp-content/uploads/2016/01/HASEE-HL9916004.zip
5 Vowney rom https://mega.nz/#!WtFRjIQb!NrQlJeemUZVz0Lr9SlgM2pap7MDkYZPiz1PdTkn0yuI
6- in SP_Flash_Tool------ flash it done
Has anyone ever tried this rom? Are there some differences between Elephone's original ROM (which is very bad) and Hasee's rom? I would try Hasee's rom but I would like to have further informations about it
Edit:
I tested it:
no gapps
fingerprint doesn't work (application crash when setting)
the rom recognizes only 3 gb of ram
the phone is very hot
ok video 4K...
test in progress
4K recorded properly?
4K recorded properly?
Llopbal said:
4K recorded properly?
Click to expand...
Click to collapse
Sorry, I have not run records and now I installed the original rom given that no one has thought of doing the same my test
Thank you for try this Rom I found this Rom information by elephone officials Website and this Rom has function by me but I don't have experience about Rom building I thought maybe some Developer can do it for everyone the elephone vowney user
http://www.needrom.com/download/hasee-hl9916004/
Here is from Rom information
Is it possible like before hasee rom install this rom?
http://forum.xda-developers.com/pure-xl/orig-development/rom-allview-s-stock-modified-soon-t3366508
Vowney Hasee self testing Rom
I've been using this for a while. It's made my vowney a proper phone. Gets a little hot but better than stock. Everything works apart from Fingerprint.
Flashing succes finally...
Yep...
After a very long battle i have also been able to install this experimental vowney-hasee rom...
I have Windows 7, x64.
I encountered many problems on the way, of which nobody said anything on the posts above:
- everytime i tried flashing , the MTP USB device driver could not be installed by the windows update process, which i couldn't stop untill it finished searching for the driver and couldn't find it... It lookslike the problem is in the phone itself. Solution found: reboot phone, wipe cache partition.
- when trying to flash using guide above, phone got never detected by flashing software and gave error:
"the memory buffer for loading image verification fail"
That i could not get over ... but... i found something on another forum...
And i ended up flashing the rom using that tool, successfully !!!
Tool downloaded is SP_Flash_Tool_v5.1524.00.000.zip
Same procedure: Load DA file, load scatter, click "Download button", restart phone. Imediately after restart, phone starts getting flashed by software.
Now i have a new problem: i can't damn find to change to english, from chinese language, but i'll be back with details on it.
:good:
Ok, after having the rom for one day i considder it still very dissapointing in that that everything is chinese and there is no gapps at all. Tried to install manually Play Store, it didn't work at all after install...
Unusable... Flashing 20060125 original Vowney update back...
sagimarius said:
Ok, after having the rom for one day i considder it still very dissapointing in that that everything is chinese and there is no gapps at all. Tried to install manually Play Store, it didn't work at all after install...
Unusable... Flashing 20060125 original Vowney update back...
Click to expand...
Click to collapse
Change Language from Chinese to English
I found english, i changed to english, but there are still a bunch of stuff in chinese, that's what i meant... And no chance to install gapps....
And no working TWRP ...
I did
Traton said:
Change Language from Chinese to English
Click to expand...
Click to collapse
Yes, i did. That's what i mean... Even after changing language to english, still half the rom stays chinese and the most disapointing thing is: no chance to install google apps. n
alternative rom...
model: Creo Mark 1
Link download
Interesting..
did you try it on? any experiences with it?
does the camera make better detailed pics?
does it still warm up when used with video / skype etc ?
pakyto said:
alternative rom...
model: Creo Mark 1
Link download
Click to expand...
Click to collapse
I tried it, but i cant get it to work, after flashing it the phone only shows elephone logo
I flashed the creo mark 1 ROM successfully today. After flashing with sp tools, I rooted then immediately went into recovery, applied super su, then wiped dalvik cache, & cache. It then booted into creo ROM. Every thing worked apart from no 1 sim card. No 2 worked. Location always on & had to apply WiFi before setup. Has a cool auto update feature. Camera very good. All google services worked & updated. Never tried to make a call, but it showed answer machine message. I reverted back to stick 5.1. Somebody might see a ROM similar with 6.0 or 7.0 I can fiddle about with. Also the haase ROM also works very similar. Shame about the vowney phone, I bet 7.0 would run beautiful on it.
Hello. This looks like the place I can get the best help.
Got a Xiaomi Mi5 last week - cheap and very cheerful. Having read online about possible fake roms and bloatware I thought the safest option would be to load the official stable rom to be safe.
Attempt 1
Following the MIUI guidance I downloaded the ROM, copied it to my phone in Windows explorer and then used the MIUI updater tool within the phone to load the new ROM.
http://en.miui.com/a-232.html
Everything went swimmingly for a couple of hours, but then the phone began crashing.
Attempt 2
By this stage I realised the above method was no longer available to me. So I got unlocking privalidges, unlocked my phone. Then, using MiFlash I flashed the latest ROM to the phone. Now the crashing problems happen within about a minute. It actually froze the screen first time round so I did it again.
Added fun issue - left my phone on overnight to charge. And it had stopped charging at 58%.
Attempt 3
Downloaded the EU MIUI Rom. Accessed TWRP in my phone and tried to use it to wipe and install. Not sure the wipes were fully effective - got a lot of red writing. And when I went to install the new ROM the internal storage was 0MB.
Had a look at guidance, and I forget what I did, but was finally able to see the zip file on my phone through TWRP. I got the "7" error. Have read how to fix this but seems too risky considering whats gone before.
Desired solution
I would just like any ROM on my phone which works. Don't really care which, I have followed each guide religiously. It may well just be a faulty phone but I don't want to send it back to China without ruling out the problem being me screwing with the software. Especially as I assume i've technically voided warranty... (I can reload Global Developer and relock it though so have hidden it pretty well. Only difference I can tell is that I now get a menu in recovery mode when before I got instruction to go to PCsuite).
Also - I seem to remember there originally being a downloaded_rom file in the internal memory which is no longer there. If im sending it back do I need to recreate one to hide my activity?
Appreciate any advice.
Moley1985 said:
Hello. This looks like the place I can get the best help.
Got a Xiaomi Mi5 last week - cheap and very cheerful. Having read online about possible fake roms and bloatware I thought the safest option would be to load the official stable rom to be safe.
Attempt 1
Following the MIUI guidance I downloaded the ROM, copied it to my phone in Windows explorer and then used the MIUI updater tool within the phone to load the new ROM.
http://en.miui.com/a-232.html
Everything went swimmingly for a couple of hours, but then the phone began crashing.
Attempt 2
By this stage I realised the above method was no longer available to me. So I got unlocking privalidges, unlocked my phone. Then, using MiFlash I flashed the latest ROM to the phone. Now the crashing problems happen within about a minute. It actually froze the screen first time round so I did it again.
Added fun issue - left my phone on overnight to charge. And it had stopped charging at 58%.
Attempt 3
Downloaded the EU MIUI Rom. Accessed TWRP in my phone and tried to use it to wipe and install. Not sure the wipes were fully effective - got a lot of red writing. And when I went to install the new ROM the internal storage was 0MB.
Had a look at guidance, and I forget what I did, but was finally able to see the zip file on my phone through TWRP. I got the "7" error. Have read how to fix this but seems too risky considering whats gone before.
Desired solution
I would just like any ROM on my phone which works. Don't really care which, I have followed each guide religiously. It may well just be a faulty phone but I don't want to send it back to China without ruling out the problem being me screwing with the software. Especially as I assume i've technically voided warranty... (I can reload Global Developer and relock it though so have hidden it pretty well. Only difference I can tell is that I now get a menu in recovery mode when before I got instruction to go to PCsuite).
Also - I seem to remember there originally being a downloaded_rom file in the internal memory which is no longer there. If im sending it back do I need to recreate one to hide my activity?
Appreciate any advice.
Click to expand...
Click to collapse
Greetings and welcome to assist. Xiaomi phones are encrypted by default so you need to wipe your phone in fastboot to access your storage again and you also need to flash latest su zip to disable dm verity. That should clear you internal memory issues and allow you to flash a zip through twrp
Good Luck
Sawdoctor
Hello, good night, I have a problem with the camera, it takes 30 seconds to start, I do not know what is going on, someone who can help me, this happened after installing Miu 10 with the Mi Mi TR Rom V.8.7.29 of this page https://forum.xda-developers.com/mi...iui10-miui-tr-rom-8-7-29-coming-soon-t3822279 and I had error the camera and install a fix of the camera that is that same page and the problem was solved but I gave many errors that rom so I decided to return to miu 9 and I did it through the twrp formatting data and I could go back to miu 9 but I started to give error the camera for what install from flash tool but it still takes time to start the camera, I do not know if it was to install that camera fix earlier or not, someone to help me please.
I enclose a video so you can see my problem. https://www.youtube.com/watch?v=A2uDX0FSFpM
Maybe flashing a new firmware can solve the problems:
https://sourceforge.net/projects/xi..._V9.5.3.0.NCHMIFA_f75ae7e989_7.1.zip/download
Flash this using TWRP and let me know the results :highfive: