My G930FD is shutting down randomly... And I mean very randomly.
To explain, my issue is that once in a while, when receiving a call, my phone will begin to ring and then completely shut down before it even finishes the first ring. What's more is that I cannot start it back up unless I plug it in and then it does its little charging animation.
I have been stuck in situations where I need my phone, but didn't have a charger when this freak occurrence takes place... I've tried every combination of buttons but I cannot start the device unless I plug it in first.
My current setup:
Superman ROM, with Jesse kernel.
Clean flash.
This has happened with many super kernel versions, as well as the current version of Jesse kernel. I have also used many versions of Superman ROM, but I've only experienced this problem for the past couple weeks... I've tried everything. What is going on?
Sent from my SM-G930F using XDA-Developers mobile app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any of these xposed modules known for causing problems?
Sent from my SM-G930F using XDA-Developers mobile app
jjohn7293 said:
My G930FD is shutting down randomly... And I mean very randomly.
To explain, my issue is that once in a while, when receiving a call, my phone will begin to ring and then completely shut down before it even finishes the first ring. What's more is that I cannot start it back up unless I plug it in and then it does its little charging animation.
I have been stuck in situations where I need my phone, but didn't have a charger when this freak occurrence takes place... I've tried every combination of buttons but I cannot start the device unless I plug it in first.
My current setup:
Superman ROM, with Jesse kernel.
Clean flash.
This has happened with many super kernel versions, as well as the2 current version of Jesse kernel. I have also used many versions of Superman ROM, but I've only experienced this problem for the past couple weeks... I've tried everything. What is going on?
Sent from my SM-G930F using XDA-Developers mobile app
Click to expand...
Click to collapse
Dont worry you should change kernel , use supermans 1.5.2 beta. Join his telegram chanel you will find link in his kernel thread. You can also use the default kernel from his aroma installer.with his beta kernel you can use synapse to set your values.
kutulu32 said:
Dont worry you should change kernel , use supermans 1.5.2 beta. Join his telegram chanel you will find link in his kernel thread. You can also use the default kernel from his aroma installer.with his beta kernel you can use synapse to set your values.
Click to expand...
Click to collapse
I have been using the super kernel, all the way up to 1.5.1 and I've had this issue on each and every kernel that I've used. the only reason I'm using Jesse kernel right now is because of battery life.
Sent from my SM-G930F using XDA-Developers mobile app
jjohn7293 said:
I have been using the super kernel, all the way up to 1.5.1 and I've had this issue on each and every kernel that I've used. the only reason I'm using Jesse kernel right now is because of battery life.
Sent from my SM-G930F using XDA-Developers mobile app
Click to expand...
Click to collapse
I also had the same issues like you with superkernel 1.31,1.4.....
with latest beta and synapse i had not this issue.
the default samsungs kernel is the most stable. But if you want to experiment wth oc undervolting etc then use other kernels
in synapse when you go to the menu i show you in the screenshot first change the 2 governors at the bottom and leave the top one to interactive and at the end change the top one. I think if you do this wrong this is the reason for the freezes black screens revoots etc.
kutulu32 said:
I also had the same issues like you with superkernel 1.31,1.4.....
with latest beta and synapse i had not this issue.
the default samsungs kernel is the most stable. But if you want to experiment wth oc undervolting etc then use other kernels
Click to expand...
Click to collapse
Basically all I need in a kernel is battery life and permissive seLinux
Sent from my SM-G930F using XDA-Developers mobile app
kutulu32 said:
I also had the same issues like you with superkernel 1.31,1.4.....
with latest beta and synapse i had not this issue.
the default samsungs kernel is the most stable. But if you want to experiment wth oc undervolting etc then use other kernels
in synapse when you go to the menu i show you in the screenshot first change the 2 governors at the bottom and leave the top one to interactive and at the end change the top one. I think if you do this wrong this is the reason for the freezes black screens revoots etc.
Click to expand...
Click to collapse
Is 1.5.2 confirmed fix for those issues?
Sent from my SM-G930F using XDA-Developers mobile app
jjohn7293 said:
Is 1.5.2 confirmed fix for those issues?
Sent from my SM-G930F using XDA-Developers mobile app
Click to expand...
Click to collapse
for me yes if you pay attention to the menu in synapse also.
Try it and see for your self i havent read others opinions about this issue.
kutulu32 said:
for me yes if you pay attention to the menu in synapse also.
Try it and see for your self i havent read others opinions about this issue.
Click to expand...
Click to collapse
What will synapse tell me?
Sent from my SM-G930F using XDA-Developers mobile app
jjohn7293 said:
What will synapse tell me?
Sent from my SM-G930F using XDA-Developers mobile app
Click to expand...
Click to collapse
in the screenshot first change the 2 profiles for example performance and then the governor
kutulu32 said:
in the screenshot first change the 2 profiles for example performance and then the governor
Click to expand...
Click to collapse
Idk what that means.
Sent from my SM-G930F using XDA-Developers mobile app
Related
NEW CONFIGURATION
OF STOCK 4.3 KERNEL
Click to expand...
Click to collapse
Hi guyz, since i don't like the default parameters of stock JB (4.3) kernel,
i'm trying to use my own one witch i could have little less power usage
with hight tasks like web browsing or gaming.
Click to expand...
Click to collapse
HOW IT WORKS?
Simply, it decrease the cpu ramping up to maxfreq to preserve
a lower voltages of the SoC, it means, less power usage.
HOW TO FLASH?
REALLY?!? :silly:
Flash it as a normal ROM.
####################
You couldhave issues and choppynesses
Enjoy and, if you like, rate 5 stars
and sure, FEEDBACKS me!!
It's an order!
It should works with all 4.3 JB original samsungs rom.
BTW, it's only a script, not invasive as should.
YOU NEED ROM ROOTED TO USE THIS!
Click to expand...
Click to collapse
ENJOY
Click to expand...
Click to collapse
:laugh:
I will tray ....
Sent from my GT-N7100 using XDA Premium 4 mobile app
Good venture !
'less power usage' means better on battery ?
sorry for noob Q
rraaka said:
Good venture !
'less power usage' means better on battery ?
sorry for noob Q
Click to expand...
Click to collapse
sure
THANKS
There is also a way to overclock maybe?
davibs said:
There is also a way to overclock maybe?
Click to expand...
Click to collapse
nope.. simply it only changes some values of the original pegasusQ governor, overclock is a feature of the modded kernel witch has the correct code in its modules
so, no modules no oc
btw, 4 cores at 1.6ghz is not a common situation, so, an overclock could only increase the consuption since 1 core goes to an OC value witch is to high..
you have to know, more is the freq, more and more is the power consuption
a simply ex, 1 dualcore at X freq absorbs less energy than 1 core at 2X freq.. but, the real teorical computation power is the same..
multithreading is to prevent high battery drain caused by too high freqs
Any feedback?
there is any way to allow unstable power charger in 4.3??
RoNeReR said:
there is any way to allow unstable power charger in 4.3??
Click to expand...
Click to collapse
Allow?
I never saw unstable power while charging.. maybe you have some issues with cable..
anyway only kernel mod can change modules, so, only kernel mod could do what you would
It's only a setting
i have a problem with my note 2... extremly slow charging...
i try a lot of solution....
the only that work probly is to use moded kernel and use stweak or any other control kernel app for ignore unstable power
http://forum.xda-developers.com/showthread.php?t=2278675
Without source code is impossible to change the code of the system
Ciao Iba!! Italian?? I'm from Genoa
trying your script on hurricane v3 and I hit for the first time 22.000 points in antutu benchmark..considering there's no overclock it is a great result...the wall was always 21.700-21.900 more or less.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Only one thing: now I have your script, if I recharge the phone switched off, the orange led is not working anymore...
ciao!!
Lagging when playing music
i faced problem lagging when playing music.. with tried stock music player and music player.. is that due to this mod? i cant confirm it because i am flashing rom recently.. or anyone face this also??
gannjunior said:
Ciao Iba!! Italian?? I'm from Genoa
trying your script on hurricane v3 and I hit for the first time 22.000 points in antutu benchmark..considering there's no overclock it is a great result...the wall was always 21.700-21.900 more or less.
Only one thing: now I have your script, if I recharge the phone switched off, the orange led is not working anymore...
ciao!!
Click to expand...
Click to collapse
Well the benckmark is strange.. and.. the led problem is not a script fault since script doesen't touch those parameters
Gabrieltan said:
i faced problem lagging when playing music.. with tried stock music player and music player.. is that due to this mod? i cant confirm it because i am flashing rom recently.. or anyone face this also??
Click to expand...
Click to collapse
Change rom.. the settings are low.. but not so low!
Stock kernel that can go with N7100ZSUEML1 ?
Dear @iba21,
I have tried searching and asking around on multiple forums to no avail. Therefore trying here as a final attempt.
Would you happen to have a link to somewhere I can download a stock kernel that can go with N7100ZSUEML1 ? My custom counter is resetting to 1 even after Triangle away, as I don't have stock kernel.
Thanks very much in advance.
@iba21, stock kernel- will this work on custom roms kernel like phoenix, dn3 etc.?
Regards.
Sent from my GT-N7100 using XDA Premium 4 mobile app
nitol said:
@iba21, stock kernel- will this work on custom roms kernel like phoenix, dn3 etc.?
Regards.
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yup if those have stock governors
@iba21, testing on Phoenix stock kernel with pegasusq governor. Think you've done a great job.
Regards.
Sent from my GT-N7100 using XDA Premium 4 mobile app
Please assist to check the permission.is it correct since the others is different. Thanks.
Sent from my GT-N7100 using Tapatalk 2
This kernel is for T-mobile 4.4.2 Stock LG Roms with a custom recovery. Do not use this on 4.4.2 AOSP or 4.2.2 Stock
You may use this kernel on future 4.4.2 stock rom releases (As long as they are custom recovery compatible)
Directions for 4.4.2 Stock rom with a recovery can be found here
Main features:
- In kernel thermal (Intellithermal)
- Two in kernel mpdecision hotplugs (Bricked or Intelliplug, you can choose which one to use)
- Dynamic Fsync (Faux)
- Eco mode (Only uses 2 cores - Optional)
- Additional Govs: Intelliactive (Faux) ElementalX (Flar)
- Voltage control (No overclocking yet, but soon)
- Additional I/O scheds
- All TCP congestion types enabled
- Many Improvements, Many useless logs disabled
--------------------------------------------------------------------
Additional Info:
You can switch between intelliplug or bricked mpdecision in the specific menu in trickster. Bricked is default, Only one can be enabled at a time. Bricked is found in the "mpdecision" submenu. Intelliplug is found on the main screen.
Kernel is compatible with francos "per app modes" in his paid app
-------------------------------------------------------------------
Current Release Download
Changelog:
Source
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FIRST!
Thanks. Flashing now. Will report any issues
Just flashed this. Don't seem to have any issues with the kernel. Just waiting for overclocking capability. I am sure it will come soon. Just glad somebody stepped up with a custom kernel for stock 4.4.2 based roms. Thanks dr87!
Just flashed. Hope this fixes my RR.... you DA man dr87. So far so good we'll see how battery life is. Thanks for your hard efforts. :thumbup:
Sent from my LG-D801 using xda app-developers app
Love you for reviving our device section
Sent from my LG-D801 using Tapatalk
Any hope for the international version D802?
Sent from my Evo 3D GSM using XDA Premium 4 mobile app
Sorry.. Wrong thread..
my phone reboots with this kernal and i only lowered voltage by 25mv
tlxxxsracer said:
my phone reboots with this kernal and i only lowered voltage by 25mv
Click to expand...
Click to collapse
well then don't lower voltage
stock 4.4 seems to be more sensitive to voltage changes than 4.2, its the new kernel changes (not mine, LG's)
I dropped my voltage by -25 and I am not having any problems.
dr87 said:
well then don't lower voltage
stock 4.4 seems to be more sensitive to voltage changes than 4.2, its the new kernel changes (not mine, LG's)
Click to expand...
Click to collapse
i have a small issue, every time i quit camera app, it will freeze for about 3-5 sec.
My battery life has been downright bad, anyone else seeing that too?
Sent from my LG-D801 using Tapatalk
Great kernel. Can't wait for overclocking capability. I know it will be coming soon.
Just out of curiosity, why do your Runqueue Thresholds for Bricked msm_mpdecision differ so greatly from what showp1394 implemented on the Nexus 5? With an almost identical SoC, wouldn't we want to stay closer to those values?
Sent from my LG-D801 using Tapatalk
suppliesidejesus said:
Just out of curiosity, why do your Runqueue Thresholds for Bricked msm_mpdecision differ so greatly from what showp1394 implemented on the Nexus 5? With an almost identical SoC, wouldn't we want to stay closer to those values?
Click to expand...
Click to collapse
The chips aren't almost identical, they ARE identical
Secondly our thresholds are exactly the same, I just double checked both sources. Not sure where you see otherwise.
suppliesidejesus said:
My battery life has been downright bad, anyone else seeing that too?
Click to expand...
Click to collapse
Nope, been using this before release and have better battery than aosp, same as 4.2.2. Check apps.
dr87 said:
The chips aren't almost identical, they ARE identical
Secondly our thresholds are exactly the same, I just double checked both sources. Not sure where you see otherwise.
Nope, been using this before release and have better battery than aosp, same as 4.2.2. Check apps.
Click to expand...
Click to collapse
Yeah, I found that the Bluetooth app had been holding wakelocks even when off. Force closed the app so hopefully that sorts my idle usage. I got the other numbers from his XDA threads, but those values may very well have been carry over from the Nexus 4 configuration.
FYI, here is what I am referring to:
Hammerhead - http://forum.xda-developers.com/showpost.php?p=47399641&postcount=2
Mako - http://forum.xda-developers.com/showpost.php?p=35667484&postcount=2
Weird, right? I wonder why he threw those particular numbers out there for Hammerhead when his source is different.
Sent from my LG-D801 using Tapatalk
suppliesidejesus said:
Yeah, I found that the Bluetooth app had been holding wakelocks even when off. Force closed the app so hopefully that sorts my idle usage. I got the other numbers from his XDA threads, but those values may very well have been carry over from the Nexus 4 configuration.
FYI, here is what I am referring to:
Hammerhead - http://forum.xda-developers.com/showpost.php?p=47399641&postcount=2
Mako - http://forum.xda-developers.com/showpost.php?p=35667484&postcount=2
Weird, right? I wonder why he threw those particular numbers out there for Hammerhead when his source is different.
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
Developers refer to this as: Copy Pasta ?
Sent from my LG-D801 using Tapatalk
erraggy said:
Developers refer to this as: Copy Pasta ?
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
I would tend to agree with you, but one of the values (only one) did change from mako to hammerhead, so I dunno.
dr87 said:
This kernel is for T-mobile 4.4.2 Stock LG Roms with a custom recovery. Do not use this on 4.4.2 AOSP or 4.2.2 Stock
You may use this kernel on future 4.4.2 stock rom releases (As long as they are custom recovery compatible)
Directions for 4.4.2 Stock rom with a recovery can be found here
Main features:
- In kernel thermal (Intellithermal)
- Two in kernel mpdecision hotplugs (Bricked or Intelliplug, you can choose which one to use)
- Dynamic Fsync (Faux)
- Eco mode (Only uses 2 cores - Optional)
- Additional Govs: Intelliactive (Faux) ElementalX (Flar)
- Voltage control (No overclocking yet, but soon)
- Additional I/O scheds
- All TCP congestion types enabled
- Many Improvements, Many useless logs disabled
--------------------------------------------------------------------
Additional Info:
You can switch between intelliplug or bricked mpdecision in the specific menu in trickster. Bricked is default, Only one can be enabled at a time. Bricked is found in the "mpdecision" submenu. Intelliplug is found on the main screen.
Kernel is compatible with francos "per app modes" in his paid app
-------------------------------------------------------------------
Current Release Download
Changelog:
Source
Click to expand...
Click to collapse
Tutorial please?
TehJorge said:
Tutorial please?
Click to expand...
Click to collapse
Lesson 1: never ever quote the OP.
This is a 100% pure stock kernel with write protection removed. I recompiled it with the write protection option disabled. There are NO OTHER CHANGES to the HTC code.
Info
Note: Breaks exFAT! HTC booby trapped the code! Use Fat 32 and you will be ok
V2 Change - Added the rest of the stock modules so you can jump to and from any kernel.
This is not a module to disable write protection. This is an actual rebuild of source.
The only change made was a changing a yes to a no to disable the write protection.
This is ONLY for Verizon base 1.55.506.2
The RAM Disk also grants ADB as root and supports init.d if busybox is installed in the /xbin folder.
Built with HTC recommend tool chain of gcc 4.6
Big thanks to @flar2 for advising me on what I need to disable.
Feel free to use this as you will for any reason you see fit.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Source is HERE!
Kernel is HERE!
Click to expand...
Click to collapse
When I say stock, I dont mean stock from HTC but compiled as pure stock from HTC source with zero changes to the code other than the disabling of write protection which is not actually in the code, its in the config. Unless of course you consider the config part of the code. Which in that case there is one code change and that is in the config :laugh:
I just want to re-iterate that this is just for a Verizon based 1.55.506.2 ROM. You must have proper stock modules installed. If you installed a custom kernel for another build you may have issues.
Once again, this is for a stock build 1.55.506.2 Verizon ROM!
ill give it try on 1.54.401.5 base its a no go, alot FC
lol. Nice!
wait is that nice because i was dumb enough to even try
Karl said:
wait is that nice because i was dumb enough to even try
Click to expand...
Click to collapse
Oh, I thought you posted that as a joke :angel:
scrosler said:
Oh, I thought you posted that as a joke :angel:
Click to expand...
Click to collapse
i knew people would probably still ask you even though you posted a disclaimer like 3 times, so i thought i would try it so it could be said that it was tested and etc etc :crying:
This is the kernel included in your clean Rom? I want to try a different kernel but like to have the stock ready so I don't have to reflash the whole Rom
Sent from my HTC6525LVW using Tapatalk
two_cents said:
This is the kernel included in your clean Rom? I want to try a different kernel but like to have the stock ready so I don't have to reflash the whole Rom
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
No the kernel in CleanROM is the HTC compile kernel from the same source.
This kernel (I downloaded the source and made the Write Protect edit) compiled it myself.
This kernel does not include the WiFi module. Make sure if you have flashed another kernel the WiFi module did not get over written.
I am going to upload a new version tonight that will add in the stock WiFi module; My initial intent was only to be used on a stock based ROM not as a fall back for kernel hopping. But I will add the extra stock modules so it can be used as a fall back kernel as well. Then everyone will be happy ;c)
Nice, I was looking for a stock recovery flashable kernel with WP removed on the latest 1.55.605.2 base. Awesome. Thanks for this!
I just updated the download link to Version 2.
Version 2 includes the stock modules from the stock ROM so you can completely jump back and forth from one kernel to another and not have to worry about any modules not being over written correctly. :good:
What day is it Scott?
Sent from my HTC6525LVW using XDA Premium 4 mobile app
pjim said:
What day is it Scott?
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have no clue... None... I seen some sun light in the past 96 hours... but not even really sure if it was then... No clue...
scrosler said:
I have no clue... None... I seen some sun light in the past 96 hours... but not even really sure if it was then... No clue...
Click to expand...
Click to collapse
Probably not 4/31?
Sent from my HTC6525LVW using XDA Premium 4 mobile app
pjim said:
Probably not 4/31?
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Good point....
See what happens to you when you dont go outside?
scrosler said:
Good point....
See what happens to you when you dont go outside?
Click to expand...
Click to collapse
tequila and bed buddy?
Sent from my HTC6525LVW using XDA Premium 4 mobile app
pjim said:
tequila and bed buddy?
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hehehe! Soon!
Thanks allot for adding the modules... Now I can start playing with kernels again... Hopefully someone will figure out the exFAT issue other than faux and stock all kernels lose my 64gb sdcard
There seems to be something missing from the v2 kernel that isn't in clean Rom kernel... I lost my 64gb card after flashing back
Sent from my HTC6525LVW using Tapatalk
two_cents said:
Thanks allot for adding the modules... Now I can start playing with kernels again... Hopefully someone will figure out the exFAT issue other than faux and stock all kernels lose my 64gb sdcard
There seems to be something missing from the v2 kernel that isn't in clean Rom kernel... I lost my 64gb card after flashing back
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
The CleanROM kernel is the actual HTC Built kernel.
If this is missing exfat I will just need to recompile it again with the ex-fat option turned on. Not a huge deal.
Download : Aurora_N920P_Kernel_6.0.1.tar.md5
Zip flash via Recovery Aurora_N920P_Kernel_6.0.1.zip
* AUTO-ROOT SYSTEM-LESS SuperSU v2.71 (on flash)
* Based on official Samsung source: Samsung OSRC
* ramdisk base: N920PVPU2BPC3
* KNOX WARRANTY VOID: 1
* KNOX Remove All
* SELinux PERMISSIVE (default) or ENFORCING
* DEEP SLEEP FIX
* Compiled with UBERTC GCC 5.3.1 20160401 + Graphite optimizations
* Linux 3.10.101
* init.d script support (drop in script & set permissions to 755 or 777 and reboot)
* adb insecure
* Mali GPU DVFS disabled for min/max frequencies
* Secure storage = false (should prevent WIFI settings & passwords wiping on reboots)
* Synapse app support for many kernel configurations
Verry Good
Perfect sir.
Thanks so much for this, cant wait to give it a run.
Is it the kernel included in the last Lamlazyrom? I'm not on MM right now, but it ran good yesterday while i tested it out.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A little bit off topic but...
I've been using many different browsers to translate the Vietnamese to English but they all leave me curious. It seems the first few versions of Lamlazyrom had a sprint base and this last version is from a chinese dual sim GSM base N9200ZCU2BPC5?
Have you guys figured out how to get the sprint cdma radio working on all the gsm note 5 roms?
I dont know if it is my poor sprint signal but i had to use an app from the playstore to get into the apn settings to add/remove/modify a few things to get data and hot spot working.
Maybe this should be moved to the Original Andoid Development with the other Kernels so people don't miss out?
can anyone make a zip from the kernel ??
Sent from my SM-N920P using XDA Premium HD app
954wrecker said:
Is it the kernel included in the last Lamlazyrom? I'm not on MM right now, but it ran good yesterday while i tested it out.
A little bit off topic but...
I've been using many different browsers to translate the Vietnamese to English but they all leave me curious. It seems the first few versions of Lamlazyrom had a sprint base and this last version is from a chinese dual sim GSM base N9200ZCU2BPC5?
Have you guys figured out how to get the sprint cdma radio working on all the gsm note 5 roms?
I dont know if it is my poor sprint signal but i had to use an app from the playstore to get into the apn settings to add/remove/modify a few things to get data and hot spot working.
Maybe this should be moved to the Original Andoid Development with the other Kernels so people don't miss out?
Click to expand...
Click to collapse
Thanks you.
I make lamlazy rom for vietnam use.
And not suport for cdma.
Yes. I will update in version 4
pbedard said:
can anyone make a zip from the kernel ??
Sent from my SM-N920P using XDA Premium HD app
Click to expand...
Click to collapse
Okie. I will make zip flash
lamlazy said:
Okie. I will make zip flash
Click to expand...
Click to collapse
@lamlazy a zip version is attached here
I created one for the guys this morning to test with our custom N920P MM rom that will be released this weekend hopefully. If all goes well, you might get notified for credits for this new kernel for us if it gets included.
Regards - Troy
In testing this kernel right now but it seems it doesbt Work with synapse !!!!
torhect said:
In testing this kernel right now but it seems it doesbt Work with synapse !!!!
Click to expand...
Click to collapse
How can you tell?
I haven't tried with the app, just don't have the time at the moment maybe some other users will weigh in as well. :good:
tdunham said:
How can you tell?
I haven't tried with the app, just don't have the time at the moment maybe some other users will weigh in as well. :good:
Click to expand...
Click to collapse
Its ok!! By the way nice kernel so far! my battery seems to improve ill keep testing thanks! How is ram management with this kernel ?
giving it a test and will report back thanks
@lamlazy
Ok, bug reporting...
Flashing this removes, hides or disables the supersu application if it is already installed. Flashing Supersu 2.71 does not restore the app.
Fresh flashed the kernel in a rom with the same result, the supersu app is missing but additionally there is no longer any prompts for root access which means ALL apps get access without asking.
Also, the kernel will not run by itself from a fresh flash unless it gets patched by systemless root first.
tdunham said:
@lamlazy
Ok, bug reporting...
Flashing this removes, hides or disables the supersu application if it is already installed. Flashing Supersu 2.71 does not restore the app.
Fresh flashed the kernel in a rom with the same result, the supersu app is missing but additionally there is no longer any prompts for root access which means ALL apps get access without asking.
Also, the kernel will not run by itself from a fresh flash unless it gets patched by systemless root first.
Click to expand...
Click to collapse
yes. im fix it
954wrecker said:
Is it the kernel included in the last Lamlazyrom? I'm not on MM right now, but it ran good yesterday while i tested it out.
A little bit off topic but...
I've been using many different browsers to translate the Vietnamese to English but they all leave me curious. It seems the first few versions of Lamlazyrom had a sprint base and this last version is from a chinese dual sim GSM base N9200ZCU2BPC5? Have you guys figured out how to get the sprint cdma radio working on all the gsm note 5 roms?
I dont know if it is my poor sprint signal but i had to use an app from the playstore to get into the apn settings to add/remove/modify a few things to get data and hot spot working.
Maybe this should be moved to the Original Andoid Development with the other Kernels so people don't miss out?
Click to expand...
Click to collapse
Hey wrecker I can't get data and I get the no sim card error some time
I just fladh the kernel and still no root
Sent from my SM-N920P using XDA-Developers mobile app
daminux said:
I just fladh the kernel and still no root
Sent from my SM-N920P using XDA-Developers mobile app
Click to expand...
Click to collapse
???
superSU hidden. you download on google play
Thank you all is perfect ?
Is there a compatible mod for extended power menu ?
Sent from my SM-N920P using XDA-Developers mobile app
lamlazy said:
yes. im fix it
Click to expand...
Click to collapse
It happened to me also!!!
---------- Post added at 10:21 PM ---------- Previous post was at 10:14 PM ----------
lamlazy said:
???
superSU hidden. you download on google play
Click to expand...
Click to collapse
Is this will always be happening all the time ? I mean supersu hidden?
The bad thing is that you cannot make to many changes to the kernel configuration
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WELCOME TO ELITE KERNELS!
Our main goal behind building these kernels is to create a setup that gives a balance between performance and battery life without straying too far from stock. We like to have our cake and eat it too. Our kernels include performance, memory, and scheduling tweaks that enables your phone to come to the party when you are hammering down on it and need performance ASAP, and to go to sleep faster than a basset hound on a warm summer day. We put these kernels together mainly for our own use; so what we release is what we personally use. We hope you enjoy them too!
Elite Kernel Members
@buckmarble
@brymaster5000
Special Features (added to stock options)
Storage
Linux 3.10.100
Synced with Googles DR1.5 and DR1.6 branches
Boot
Permissive Selinux
Anykernel 2 installer - ramdisk edits that don't overwrite your current boot.img tweaks
Forced Encryption.........just kidding.
Optimization
Neon
Official Linaro 4.9
CPU
Stock CFS
voltage control
GPU
Governors
Stock governors
IO Schedulers
NOOP
Deadline
CFQ
ROW
SIO
BFQ
FIOPS
Battery
USB Fast Charge
Miscellaneous
Wake Gestures + Camera Launch Gesture
Color/Gamma Control
Frandom
Fsync
Advanced TCP Congestion Control
Scripted control with Elite.sh in /System/elite
Upstream Linux patches
High Performance Audio
Microphone and Volume gain
Wakelock control
Marshmallow 6.0.1
Elite_Bullhead_M-07_06_2016
Marshmallow 6.0.1 - Testing
N Preview 3
Elite_Bullhead_N-06_06_2016
SUPERSEDED DOWNLOADS
Elite_Bullhead_M-06_06_2016
Elite_Bullhead_M-05_06_2016
What is enabled by default? We like to control our kernels with a script run at boot for defaults, although any kernel app can control the built in settings. Here is what we set as default upon boot:
Sweep left 2 sleep
Doubletap 2 wake
CFQ IO scheduler with 1536 read ahead
If you want to change anything you can open up /system/elite/Elite.sh and save and execute (or use your favorite control app). Current method for N Preview has script in /system/su.d/Elite.sh
KERNEL SOURCE
Special Thanks
@flar2 for his wake gestures
@franciscofranco for his sound control
@osm0sis for his anykernel2 setup
@bsmitty83 for helping your old B-Team member to get ak2 running
Our testers/friends - you know who you are...
BETA TESTING KERNELS
XDA:DevDB Information
Elite Kernel, Kernel for the LG Nexus 5X
Contributors
buckmarble, brymaster5000
Kernel Special Features:
Version Information
Status: Stable
Created 2016-05-06
Last Updated 2016-10-12
reserved
reserved
Yay! Congratulations guys.
Sent from my iPhone 6s+ using Tapatalk
SynisterWolf said:
Yay! Congratulations guys.
Sent from my iPhone 6s+ using Tapatalk
Click to expand...
Click to collapse
No MODs allowed in this thread.
Welcome to the Bull!!
Sent from my Nexus 5X using XDA-Developers mobile app
@buckmarble : Nice to see you finally open the thread Seems you fixed the kernel and reverted the commits
Nice @buckmarble ! I remember you from the M7/M8 days...great to see you here!
Sent from my Nexus 5X using XDA-Developers mobile app
Great to see another legend here.
wont boot on the new purenexus update. stuck on the google logo. clean flash, tried twice. boots fine though on elementalx.
I tried flashing on YAOSP and I got the red exclamation point system corrupt.
rebretz000 said:
I tried flashing on YAOSP and I got the red exclamation point system corrupt.
Click to expand...
Click to collapse
This will happen. Ignore it
fix-this! said:
wont boot on the new purenexus update. stuck on the google logo. clean flash, tried twice. boots fine though on elementalx.
Click to expand...
Click to collapse
I need logs. My daughter is using my 5x ATM and it is working fine on stock but I can't test other Roms right now.
Sent from my HTC6545LVW using Tapatalk
buckmarble said:
This will happen. Ignore it
I need logs. My daughter is using my 5x ATM and it is working fine on stock but I can't test other Roms right now.
Sent from my HTC6545LVW using Tapatalk
Click to expand...
Click to collapse
Hey mate good to see you around. Welcome to Bullhead, keep up the work
I have a 5x but its stock and unrooted at the current moment
poondog said:
Hey mate good to see you around. Welcome to Bullhead, keep up the work
I have a 5x but its stock and unrooted at the current moment
Click to expand...
Click to collapse
Just like my htc 10 is! Haha I am maintaining kernels for 3 Nexus devices and hopefully adding the 10 to the list soon.
Sent from my HTC6545LVW using Tapatalk
buckmarble said:
Just like my htc 10 is! Haha I am maintaining kernels for 3 Nexus devices and hopefully adding the 10 to the list soon.
Sent from my HTC6545LVW using Tapatalk
Click to expand...
Click to collapse
You have too many phones man
Seems HTC has won back some old fans
I'm on chroma, everything is working fine here except for the voltage control. When I try to change a value in ex kernel manager nothing changes
fix-this! said:
wont boot on the new purenexus update. stuck on the google logo. clean flash, tried twice. boots fine though on elementalx.
Click to expand...
Click to collapse
Flash boot.img of purenexus and try again.
Sent from my Nexus 5X using Tapatalk
fix-this! said:
wont boot on the new purenexus update. stuck on the google logo. clean flash, tried twice. boots fine though on elementalx.
Click to expand...
Click to collapse
Flashed it on latest PureNexus without problems. Its running great!
for now it is good kernel, i make test in the future days
Curious to know how this stacks up against other popular bullhead kernels.