Hello, I have ported a cm13 based rom on my elephone p2000.
So far only 2 bugs:
1)home key not working at all (tried to replace generic.kl from stock and from a working custom rom)
2)sim1 is recognized but it has no signal, imei is valid but baseband shows as unknown.
elidoe89 said:
Hello, I have ported a cm13 based rom on my elephone p2000.
So far only 2 bugs:
1)home key not working at all (tried to replace generic.kl from stock and from a working custom rom)
2)sim1 is recognized but it has no signal, imei is valid but baseband shows as unknown.
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
There isn't a specific forum for the P2000 on XDA. However, I recommend you post your question here:
Android Q&A, Help and Troubleshooting
You'll find expert advice there.
Good luck!
Related
Hi XDA Assist.. Need more guide for me please...
I 've tried to upgrade my GT-N7000 (DXLSE - JELLYBEAN - BASEBAND N7000DXLS8) into some kitkat rom such as omnirom, cm, carbon, slimkat, dirty unicorn etc, and it all installed successly...
i 've try installed lolipop (cm.12) still the network problem persist...
Yes there is always problem with my network services, its very unstable (No service / No Internet Connection) but wifi connection is normal
but everytime i reflash (reinstall) back to Stock Rom JellyBean (4.1.2), every problem above has gone, there is no network problem in my GT-N7000...
I 've been tried every step as xda guide (flash kitkat rom), the same problem always happened (network problem)...
sometime it can detect my simcard network, but still there is no internet connection....
please help... i really want the kitkat rom in my GT-N7000... Thx Guys...
My Android Stuff is :
GT-N7000 (DXLSE)
JellyBean 4.1.2
Baseband N7000DXLS8
Anyway... I 've set the correct APN... but the same problem still persist...
Please Help...
Hi,
Here is a dedicated help thread in your device section.... It would be the best place to ask for help,
[FAQ] [Q&A] [Noob Friendly] HELP THREAD - POST ALL YOUR SUPPORT QUESTIONS HERE
Good luck!
The Darth... I ve been there... And still got no solution... Anyway thx for the suggestion.. Thx for the response..
Sent from my GT-N7000 using XDA Free mobile app
can someone give me the modem file of my motorola moto g2 .problem in network guys. I have installed other modem files this is having cause of this problem.the configuration are included in the image that is attached. the networks problem can be seen in the attached photo
Hi,
Thanks for using XDA Assist Please visit here [ALL IN ONE GUIDE] Unlocking Bootloader + Rooting + Flashing TWRP + Backup Stock ROM and if you have any doubt kindly post there so that experts using your device may help you in more better way
Good Luck!
Please help with my device, Cherry Mobile Omega HD 2..0 build 7 NOT 49, build 7=MT6577 chipset and build 49=MT6589 chipset. Mine is with the build MT6577, The device is not booting and i think i lost the bootloader because i cant go to any mode (Recovery,Fastboot,Normal Reboot) anyone please help.
XDA Visitor said:
Please help with my device, Cherry Mobile Omega HD 2..0 build 7 NOT 49, build 7=MT6577 chipset and build 49=MT6589 chipset. Mine is with the build MT6577, The device is not booting and i think i lost the bootloader because i cant go to any mode (Recovery,Fastboot,Normal Reboot) anyone please help.
Click to expand...
Click to collapse
Hello, and welcome to XDA!
I am having problems finding specs on this device, but if it has a MicroSD slot, you could attempt a cascading boot. But to do this, you need the first 80MB or so of a functioning device (need someone who is rooted with the same device as yours and knows how to perform a dd command).
SD card slot or not, you will want to investigate/post-in this thread:
> Android Development and Hacking > Android General > Cherry mobile Omega HD (i-mobile IQ6)
This is the closest match (same MT6577 chipset) I can find for your device when it comes to your community and device experts. Please note, you will need to be registered for an XDA account to be able to post there.
Hope this helps, and good luck!
I recently ported a CM12.1 ROM from Wiko Rainbow to my device (O+ 8.38). Everything is working fine except for the buttons. I tried replacing Generic.kl, mtk-kpd.kl and some libs (like icu libs) and still not working. Any fix for this?
3DMapPlayer said:
I recently ported a CM12.1 ROM from Wiko Rainbow to my device (O+ 8.38). Everything is working fine except for the buttons. I tried replacing Generic.kl, mtk-kpd.kl and some libs (like icu libs) and still not working. Any fix for this?
Click to expand...
Click to collapse
Hi,
Thanks for using XDA Assist.
You can post your query in Android Q&A,Help and Troubleshooting.Experts there may be able to help you
___
v7
XDA Assist
I have a lenovo a708t device 2g works perfectly but when i switch to 3g it shows no service have flashed the stock rom on it and the problem still persist I have set all apns pls help I have set the network to 3g only with mtk mode app it still not working pls how do I fix this
Olayiwola said:
I have a lenovo a708t device 2g works perfectly but when i switch to 3g it shows no service have flashed the stock rom on it and the problem still persist I have set all apns pls help I have set the network to 3g only with mtk mode app it still not working pls how do I fix this
Click to expand...
Click to collapse
Hi Olayiwola
Thank you for using XDA Assist
The device you are mentioning apparently is one of the: Mediatek MTK6592; or THL MTK6592; or Jyaiu MTK6592.
As we do not have an specific forum dedicated to your device yet, our experts at the below forum should be able to help you. Please be welcome to ask in there.
Android Q&A, Help & Troubleshooting
Nice regards and good luck.
.