I have a lenovo a708t device 2g works perfectly but when i switch to 3g it shows no service have flashed the stock rom on it and the problem still persist I have set all apns pls help I have set the network to 3g only with mtk mode app it still not working pls how do I fix this
Olayiwola said:
I have a lenovo a708t device 2g works perfectly but when i switch to 3g it shows no service have flashed the stock rom on it and the problem still persist I have set all apns pls help I have set the network to 3g only with mtk mode app it still not working pls how do I fix this
Click to expand...
Click to collapse
Hi Olayiwola
Thank you for using XDA Assist
The device you are mentioning apparently is one of the: Mediatek MTK6592; or THL MTK6592; or Jyaiu MTK6592.
As we do not have an specific forum dedicated to your device yet, our experts at the below forum should be able to help you. Please be welcome to ask in there.
Android Q&A, Help & Troubleshooting
Nice regards and good luck.
.
Related
hi every one.
i have Sony Ericsson xperia acro IS11S (AU BY KDDI) came with android 4.0.4 i updated it into cyanogenmod 10.2 Jelly bean 4.3.1 by xda member: Don No 1
every thing worked good except for the network, it shows no signal in network icon , tried to make calls said (to place a call, first turn off airplane mode) but airplane is turned off. on network setting i can't search for network manually.
when i installed (cyanogenmod 10.2) first showed massage (insert SIM card , you need to refer to the SIM card instructions that came with your device). My SIM worked on otther mobile also tested another SIM in my phene but didn't work too.
Note: i can't access engineering mode and many other dialer codes.
now i am trying to back to ics original stock but when i install it it stuck in xperia logon screen
so please help me to fix this issue.
thanks..
Hi,
Ive been searching through XDA for an answer for you but cant find much specifics on your device, even GSMarena doesnt list your phone
I would ask someone with first hand knowledge of your device or look into the stock roms linked here:
http://forum.xda-developers.com/crossdevice-dev/sony/website-japanese-xperias-ftf-t2833391
but you may need to ask in the general Q&A forum found here
http://forum.xda-developers.com/android/help
best of luck!
thanks demkantor
demkantor said:
Hi,
Ive been searching through XDA for an answer for you but cant find much specifics on your device, even GSMarena doesnt list your phone
I would ask someone with first hand knowledge of your device or look into the stock roms linked here:
http://forum.xda-developers.com/crossdevice-dev/sony/website-japanese-xperias-ftf-t2833391
but you may need to ask in the general Q&A forum found here
http://forum.xda-developers.com/android/help
best of luck!
Click to expand...
Click to collapse
thank you very much for replying and helping me. i'll try to flash ftf in the link you sent i hope it will work
thanks again
hussam2020 said:
thank you very much for replying and helping me. i'll try to flash ftf in the link you sent i hope it will work
thanks again
Click to expand...
Click to collapse
i flashed the ftf file when done my phone is stuck in boot loop problem keep restarting until i remove the battery
am really disappointed. this issue took about one month i cant access network no calls no massages no internet service
if you can find me a backup with cwm + kernel or boot.img file for my phone it may solve the problem.
you are the only one that replying to me please help.
HI,
Unfortunately there isn't much else i can help you with as there isn't a lot of information about your device
i know it's frustrating but asking in the Q&A is all you can do right now
hope you can find a fix!
Purpose of XDA-ASSIST
An issue i face after flashing a custom Rom i downloaded from this forum is a little bit tricky for me.
Everything works fine after the flashing apart 3G. Edge works just fine , but i lose network connection immediately i enable 3G service. So the phone has to always stay on 2G only.
i have tried all i know should solve it to no avail . I used Maui meta etc but it didn't work.
NB
I dont have the stock rom to reflash nvram with.
Phone: Mt6572
If there is any more relevant information i left out, please let me know. Awaiting your kindest suggestions.
Dagobert88 said:
An issue i face after flashing a custom Rom i downloaded from this forum is a little bit tricky for me.
Everything works fine after the flashing apart 3G. Edge works just fine , but i lose network connection immediately i enable 3G service. So the phone has to always stay on 2G only.
i have tried all i know should solve it to no avail . I used Maui meta etc but it didn't work.
NB
I dont have the stock rom to reflash nvram with.
Phone: Mt6572
If there is any more relevant information i left out, please let me know. Awaiting your kindest suggestions.
Click to expand...
Click to collapse
Here is what I found:
[Q] MT6572 nvram.bin required by threatalive
missing baseband mt6572 by leo_hacker82
CUBOT GT72E (MT6572) BRICKED (Help Thread) by Aedirus
Hopefully one of the mentioned advices can help in your case.
If not maybe best to ask in one of these threads, or in the Android Q&A, Help & Troubleshooting forum.
Good luck !
P.S.: Next time ... make a backup of all partitions before messing around
Thread closed. Thank you!
Custom ROM WIFI error with connecting to network
EDIT: I moved it to another section
afternoon_poop said:
Hi!
I have flashed LeWa OS 1.4 alpha on my ZTE V790 (kis lite), and this is not the first time I flashed this ROM, but now I get this error where WIFI can be turned on, but it cant connect, so I started ADB logcat from cmd (its pretty big, over 306 pages(I think its repeating around 20 times))
And also im kinda neww to this ADB thing and i cant figure out what the problem is. (i saw in a few places that the BSSID is all 00000... , but in Kali Linux the BSSID that loads from airdump-ng is different), and just to say, I have tried to replace wpa_supplicant.conf, but that didnt work!
SO if someone knows how to fix it, PLEASE HELP!
docs.google.com/document/d/12D24C9xejnalAsM-rthbwDi79D_i0WDOFa3jGESda_Q/edit?usp=sharing
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
I'm sorry to hear about your trouble. There is no forum specifically for the ZTE V790 but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help. That's a good place to start where members familiar with your device might be able to advise you.
Good luck!
aniktanims said:
Try to repair you imei,for solve the problem,or you can use mtk droid tools
Click to expand...
Click to collapse
The IMEI is the same as on the motherboard when i type *#06# , and i dont know if i can use MTK tools, because this device has ARM v7a CPU
hiii
i have this phone from 1 year and i never use it becoz i get it as a present from my brother when he come outside resident country to our home. the mobile problem is when try run any appz or do calling, it's do restart to Huawei logo and then come back to work
i tried to reflash stock ROM/ other roms but with all roms running with same problem , is that hardware problem??!!
can anyone face this kinda of problem before!!!!
anyone can help me , plz!!!
thx
speedman2202 said:
hiii
i have this phone from 1 year and i never use it becoz i get it as a present from my brother when he come outside resident country to our home. the mobile problem is when try run any appz or do calling, it's do restart to Huawei logo and then come back to work
i tried to reflash stock ROM/ other roms but with all roms running with same problem , is that hardware problem??!!
can anyone face this kinda of problem before!!!!
anyone can help me , plz!!!
thx
Click to expand...
Click to collapse
Greetings.
Thank you for using XDA Assist. Please ask the questions regarding your device here:
Android Q&A, Help & Troubleshooting
Good luck!
My device is lenovo a6000+ (not any physical damage, its a software problem done by me)
and my mistake is am unfortunately installed youphoria volte update, (i need to undo this how)
then after my phone is not getting network signal... (the band width may changed, so how to correct it)
I re installed OS too.... (phone overally good functioning except signal problem that causes calling ended)
Plz find me solution plz urgently.....
plz tell or forword this info to any another one who can help me please............
venkat09227 said:
My device is lenovo a6000+ (not any physical damage, its a software problem done by me)
and my mistake is am unfortunately installed youphoria volte update, (i need to undo this how)
then after my phone is not getting network signal... (the band width may changed, so how to correct it)
I re installed OS too.... (phone overally good functioning except signal problem that causes calling ended)
Plz find me solution plz urgently.....
plz tell or forword this info to any another one who can help me please............
Click to expand...
Click to collapse
Greetings and welcome to asssit. I found this thread that may help
http://forum.xda-developers.com/lenovo-a6000/help/weak-signal-message-sending-eror-help-t3473121
why not ask in the forum here
http://forum.xda-developers.com/lenovo-a6000/help
and the experts there will be able to help you
Good Luck
Sawdoctor