Database Info

[Completed] callers cant listen to me unless noise rreduction turned off

i had to change my display and touch panel. when i got it back from customer care this occured :
- people cant listen to me in phone call . both in dialed and received .
- during calls , screen goes back
- if i turn off the proximity , blackout fixes .
- if i turn off dual mic noise reduction , they can listen...... but my voice is not clear... sometimes shattered
- i tried with earphone , this time i don't need to turn off proximity or noise reduction...... but my voice isn't still clear and shattered
I'm not sure if its a software or hardware issue.... I'm getting kitkat next week... so software issue will be fixed... but if its a hardware problem , then i need to go for customer care...... that's very very weird to me... what to do ?

Ok,
Can you tell us more about your device, I cannot help you if you don't tell us more infos.
Device model, rooted or not, stock or custom rom, etc...
We need those infos about your device for a good help and good answer,
Thanks in advance

philos64 said:
Ok,
Can you tell us more about your device, I cannot help you if you don't tell us more infos.
Device model, rooted or not, stock or custom rom, etc...
We need those infos about your device for a good help and good answer,
Thanks in advance
Click to expand...
Click to collapse
actually its rebranded from gionee . device : walton primo s2 . stock rom. not rooted yet.
should i add any other info, philos ?

Ok, thanks for quick answer.
You have some threads about your device
[FIRMWARE] [UNBRICK] WALTON Primo S2 Official Firmware, Flashtools & Drivers
[ROOT][Tutorial] Walton Primo S2 Rooting Tool
But nothing more about your problem. I can suggest you to type " Walton Primo S2" to => "Search all forums" just above right to this post and read.
Maybe you will find a answer or you can post your issue here => General discussion > Questions and Answers
Good luck...

[Completed] network problem please help

hi every one.
i have Sony Ericsson xperia acro IS11S (AU BY KDDI) came with android 4.0.4 i updated it into cyanogenmod 10.2 Jelly bean 4.3.1 by xda member: Don No 1
every thing worked good except for the network, it shows no signal in network icon , tried to make calls said (to place a call, first turn off airplane mode) but airplane is turned off. on network setting i can't search for network manually.
when i installed (cyanogenmod 10.2) first showed massage (insert SIM card , you need to refer to the SIM card instructions that came with your device). My SIM worked on otther mobile also tested another SIM in my phene but didn't work too.
Note: i can't access engineering mode and many other dialer codes.
now i am trying to back to ics original stock but when i install it it stuck in xperia logon screen
so please help me to fix this issue.
thanks..

Hi,
Ive been searching through XDA for an answer for you but cant find much specifics on your device, even GSMarena doesnt list your phone
I would ask someone with first hand knowledge of your device or look into the stock roms linked here:
http://forum.xda-developers.com/crossdevice-dev/sony/website-japanese-xperias-ftf-t2833391
but you may need to ask in the general Q&A forum found here
http://forum.xda-developers.com/android/help
best of luck!

thanks demkantor
demkantor said:
Hi,
Ive been searching through XDA for an answer for you but cant find much specifics on your device, even GSMarena doesnt list your phone
I would ask someone with first hand knowledge of your device or look into the stock roms linked here:
http://forum.xda-developers.com/crossdevice-dev/sony/website-japanese-xperias-ftf-t2833391
but you may need to ask in the general Q&A forum found here
http://forum.xda-developers.com/android/help
best of luck!
Click to expand...
Click to collapse
thank you very much for replying and helping me. i'll try to flash ftf in the link you sent i hope it will work
thanks again

hussam2020 said:
thank you very much for replying and helping me. i'll try to flash ftf in the link you sent i hope it will work
thanks again
Click to expand...
Click to collapse
i flashed the ftf file when done my phone is stuck in boot loop problem keep restarting until i remove the battery
am really disappointed. this issue took about one month i cant access network no calls no massages no internet service
if you can find me a backup with cwm + kernel or boot.img file for my phone it may solve the problem.
you are the only one that replying to me please help.

HI,
Unfortunately there isn't much else i can help you with as there isn't a lot of information about your device
i know it's frustrating but asking in the Q&A is all you can do right now
hope you can find a fix!
Purpose of XDA-ASSIST

[Completed] Help! Part of nvram region deleted

An issue i face after flashing a custom Rom i downloaded from this forum is a little bit tricky for me.
Everything works fine after the flashing apart 3G. Edge works just fine , but i lose network connection immediately i enable 3G service. So the phone has to always stay on 2G only.
i have tried all i know should solve it to no avail . I used Maui meta etc but it didn't work.
NB
I dont have the stock rom to reflash nvram with.
Phone: Mt6572
If there is any more relevant information i left out, please let me know. Awaiting your kindest suggestions.

Dagobert88 said:
An issue i face after flashing a custom Rom i downloaded from this forum is a little bit tricky for me.
Everything works fine after the flashing apart 3G. Edge works just fine , but i lose network connection immediately i enable 3G service. So the phone has to always stay on 2G only.
i have tried all i know should solve it to no avail . I used Maui meta etc but it didn't work.
NB
I dont have the stock rom to reflash nvram with.
Phone: Mt6572
If there is any more relevant information i left out, please let me know. Awaiting your kindest suggestions.
Click to expand...
Click to collapse
Here is what I found:
[Q] MT6572 nvram.bin required by threatalive
missing baseband mt6572 by leo_hacker82
CUBOT GT72E (MT6572) BRICKED (Help Thread) by Aedirus
Hopefully one of the mentioned advices can help in your case.
If not maybe best to ask in one of these threads, or in the Android Q&A, Help & Troubleshooting forum.
Good luck !
P.S.: Next time ... make a backup of all partitions before messing around

Thread closed. Thank you!

[Completed] MOTO G Unable to Send SMS

Hi,
Need help very badly ... Tried all the methods mentioned on web starting from factory reset to Stock Rom to setting the SMSC number
Here is what my problem is
NOT able to send sms or receive SMS on MOTO G gen 1
I was using CM12.1 initially , which was good but the Gmaps were not comfy in it ( the gps used to get lost often)
Then i moved to a Custom ROM of 5.1 ( dont remember the maker basically a stock one but some boatware removed)... this is when the problem started
since then I have tried all the stuff mentioned on the forum but no help
Any way i can get it serviced , probably by locking the bootlocker and going to a service center and getting it fixed OR
IS THERE ANY OTHER SOLUTION
PLEASE HELP

smarannss said:
Hi,
Need help very badly ... Tried all the methods mentioned on web starting from factory reset to Stock Rom to setting the SMSC number
Here is what my problem is
NOT able to send sms or receive SMS on MOTO G gen 1
I was using CM12.1 initially , which was good but the Gmaps were not comfy in it ( the gps used to get lost often)
Then i moved to a Custom ROM of 5.1 ( dont remember the maker basically a stock one but some boatware removed)... this is when the problem started
since then I have tried all the stuff mentioned on the forum but no help
Any way i can get it serviced , probably by locking the bootlocker and going to a service center and getting it fixed OR
IS THERE ANY OTHER SOLUTION
PLEASE HELP
Click to expand...
Click to collapse
Hi,
There is a forum dedicated specifically for your device. You shall try to ask your question there http://forum.xda-developers.com/moto-g/help to get better help and support.
Good luck

Thread closed, thank you

[Completed] Network issue

I have a lenovo a708t device 2g works perfectly but when i switch to 3g it shows no service have flashed the stock rom on it and the problem still persist I have set all apns pls help I have set the network to 3g only with mtk mode app it still not working pls how do I fix this

Olayiwola said:
I have a lenovo a708t device 2g works perfectly but when i switch to 3g it shows no service have flashed the stock rom on it and the problem still persist I have set all apns pls help I have set the network to 3g only with mtk mode app it still not working pls how do I fix this
Click to expand...
Click to collapse
Hi Olayiwola
Thank you for using XDA Assist
The device you are mentioning apparently is one of the: Mediatek MTK6592; or THL MTK6592; or Jyaiu MTK6592.
As we do not have an specific forum dedicated to your device yet, our experts at the below forum should be able to help you. Please be welcome to ask in there.
Android Q&A, Help & Troubleshooting
Nice regards and good luck.
.