Hello ... my story a little problem ... I unlock the bootloader , install a custom- karnel , root and all perfect ! 15.3.A.1.14 received the update , the download and install flashtool wanted to try to solve few hiccups ... the problem was when connected to the pc in Flashmode only the green LED is lit for a few seconds, turn off and nothing happened , from that moment on, try conecterlo the wall charger and the same thing happens and green LED turns off, the pc Coneto and achieve to recognize it as a USB input device while another device as defined by the HID compliant provider ( as 2 different devices ) and if I connect and I hold the keys precionado volume up and down is connected as Qualcomm HS- USB QDLoader 9008, pass 30 seconds and reconnect as the 2 devices ... it is clear that attempts to repair the software with Sony PC Companion and Update Service but enters as Flashmode I could not do it , I can not connect in fastboot mode .. try to be as clear as possible thank you very much beforehand ! hope can help me . sorry for my English , I'm Argentinian
chinitool said:
Hello ... my story a little problem ... I unlock the bootloader , install a custom- karnel , root and all perfect ! 15.3.A.1.14 received the update , the download and install flashtool wanted to try to solve few hiccups ... the problem was when connected to the pc in Flashmode only the green LED is lit for a few seconds, turn off and nothing happened , from that moment on, try conecterlo the wall charger and the same thing happens and green LED turns off, the pc Coneto and achieve to recognize it as a USB input device while another device as defined by the HID compliant provider ( as 2 different devices ) and if I connect and I hold the keys precionado volume up and down is connected as Qualcomm HS- USB QDLoader 9008, pass 30 seconds and reconnect as the 2 devices ... it is clear that attempts to repair the software with Sony PC Companion and Update Service but enters as Flashmode I could not do it , I can not connect in fastboot mode .. try to be as clear as possible thank you very much beforehand ! hope can help me . sorry for my English , I'm Argentinian
Click to expand...
Click to collapse
try restoring nandroid backup from cwm if you have created one.
eddiebigmouth said:
try restoring nandroid backup from cwm if you have created one.
Click to expand...
Click to collapse
is not possible because not enter recovery mode
Did you try to connect it to another PC? Because from what I can understand, it's a driver problem.
Today I also unlocked my bootloader to try Kit-Kat and I had a massive problem with drivers. Thankfully I solved it by installing the universal driver pack by Doomlord.
nicholas said:
Did you try to connect it to another PC? Because from what I can understand, it's a driver problem.
Today I also unlocked my bootloader to try Kit-Kat and I had a massive problem with drivers. Thankfully I solved it by installing the universal driver pack by Doomlord.
Click to expand...
Click to collapse
in another, no. but if I made a partition and install windows 7. because when I had that the above operating Sintema and now I have windows 8.1. equally before attempting this update had istalado istalar Sony PC Companion with all drivers
is known about this? http://forum.xda-developers.com/showpost.php?p=49715447&postcount=13
Hey guys,i have Lg g2 800 at&t i installed a custom LP in it,after few hours it,s touch stopped working then flash it with KK firmware but no luck then i apply hardbrick proccess on it after flashing images i flash it KK firmware then it,s touch was working auto like a ghost using it then i thought to write other firmware images on it so i did agian same proccess i was trying it to connect in qualcomm mode with pc but now when i insert cable in pc auto detect the phone in qualcomm mode 9008 i short resistence many time with cable or without cable bt whenever i connect it with pc phone auto connect in qualcomm mode,so i put the phone for 2 weeks beside today when i connect it pc it,s still same it,s same with battery or without battery and not powering on also,sorry for my bad english.it,s make me crazy dont know what to do now.Experts please
[Q] Bricked. Erased/messed up bootloader. Win recognized as "HS-USB QDLoader 9008".
Hello.
Finally I hard bricked my Photon Q. I think I erased an unlocked bootloader. Right now phone cannot boot into fastboot mode. Power+Vol up, Power+Vol down held long do nothing. After connecting to Windows PC, phone is recognized as "HS-USB QDLoader 9008". I found drivers on the net. RSDlite recognizes device, but flashing fails with message that it cannot switch phone from download mode. I found QPST service software used to flash bootloader. Right now I think the problem is that I don't have proper bootloader images for Photon Q, and to be honest, I don't really know what options to use (the software seems quite complicated).
Has anyone encoutered (and solved) similar issues? Do you have any ideas, what to do? I tried some generic Qualcomm files, but couldn't flash them.
Anyone, please, help me, if you can.
Chris
I have an sony xperia c2105 (xperia L), yesterday i´ve tried to unlock bootloader, later unlock it, the phone begins to bootloop.... So i flashed a firmware, wrong one, from xperia m, cause i was thinking my phone was xperia m...
Since i flashed it my phone is detected as Qualcomm HS-USB QDLoader 9008 in all usb ports from my pc, i have installed the drivers, flashtool, everything... Flashtool is not detecting device. Leds from the phone, leds are off, pushing buttons or connecting the device to the pc... The phone is not responding on flashmode or fastboot, and flashtools is not detecting it, pc yes detects it, but as Qualcomm HS-USB QDLoader 9008 ... Screen is off, phone is hard bricked so well. Is death may i have some help?
Can you help me please??
Manuelpm said:
I have an sony xperia c2105 (xperia L), yesterday i´ve tried to unlock bootloader, later unlock it, the phone begins to bootloop.... So i flashed a firmware, wrong one, from xperia m, cause i was thinking my phone was xperia m...
Since i flashed it my phone is detected as Qualcomm HS-USB QDLoader 9008 in all usb ports from my pc, i have installed the drivers, flashtool, everything... Flashtool is not detecting device. Leds from the phone, leds are off, pushing buttons or connecting the device to the pc... The phone is not responding on flashmode or fastboot, and flashtools is not detecting it, pc yes detects it, but as Qualcomm HS-USB QDLoader 9008 ... Screen is off, phone is hard bricked so well. Is death may i have some help?
Can you help me please??
Click to expand...
Click to collapse
Hi just attach phone to pc ,install taoshan drivers ,fastboot ,flashmod drivers & flash firmware for xperia l ,done.
Sorry, posted because is hard bricked, when phone is hard bricked is supposed to be that flashmode or fastboot aren't working, same for vibration, not leds, no image etc.... This means hardbrick i mean. And my taoshan is totally hardbricked i already said, drivers installed phone appears as... 9008 in pc, wtf... How can i flash anything with my pc if i can't take phone in flashmode or fastboot? I need some help please guys my phone, i need help!!
This is the only truth about QLoader 9008 for sony xperia L
The only way for repair this phone appears in LG L70 with msm 8210, in this forum, using QFIL: https://translate.google.es/transla...k-lg-d325-stuck-on-mode-9008.html&prev=search
Tested in 2016 with zuk z2, 100% working, but the only way for this is possible for save a lot of xperias L, is attaching the files for us. When i used QPST for repair my hardbrick Zuk z2, downloaded em, was a method, for repair hardbrick; for xperia L this method not exists, are a lot of posts talking about: someone post the files, but... No one does... Okay, for 20€ you can buy a motherboard, but btw, this QPST or QFIL, save phones, not ours xperias L ofc, because no one helps...
Ah if your phone is giving some leds, or something in screen, this is not the QLoader 9008 issue, and you can save the phone with flashtool, if your phone doesnt give leds, nothing on screen (bootloop), or doesnt vibrate 3 times... You can dream with repair without paying... Everybody gives ROMS etc, but for hardbrick methods when programs are available, you can dream...
Not hard to see how this QFIL detects phone, you can install, open the program... And put the usb between the phone and the pc; you will see how this QFIL detects phone as QLOADER 9008 and you only need the things for flash, then you will save the phone; otherwise, you are only another one who losed this phone by this crap.
Best regards, now i have to go for buy new phone!! You people who know this methods are available for other phones and dont help... Maybe you have to go bed right now!!
Same with me,, mybe we need qdloader for MSM8230,, Next flash with Qfil
HerySastro said:
Same with me,, mybe we need qdloader for MSM8230,, Next flash with Qfil
Click to expand...
Click to collapse
Yes, i think same and all here is written seems right. But for Sony L with the MSM8230 chipset nothing is available so i dont have the right prog_emmc_firehose_8230.mbn file for QPST because it doesnt exist.
I need to know if i can repair the qdloader 9800 problem with a tool of many which exist for qualcomm chips. I spend already mor than 30 hours to read, search and try to fix the problem. First not, but now i am able to get it for 1-3 seconds in a green-yellow light even when i just connect the usb to charging cable. I extracted the firmware and used the TUT somewhere here. No .mbn is found in the 15.3.A.1.17 firmware in .ftf for flashtool. Flashtool connects my Sony L every 2 minutes for only 5 seconds as "unknown device". Thats all.
I need to know if Sony L 9800 problem could be solve by myself or not because now i spend every day hours many hours without solve it or know if possible?
Thanks for help and reply!
If post is not in the ideal thread the you can put it in the right one. i would appreciate it.
greeting
Can someone provied me blank flash file for motorola g6. I hard bricked my devices while updating it. There was an OTA update in my device and i was so excited that i didint notice battery percentage and started my update process. While updating my devices ran out of juice and now it is dead. It means not responding at all (not booting regularly or in recovery). When i connect it in my pc it is detected as Qualcomm HS-USB QLoader 9008. Please help me. I didnt find any blank flash file for my motorola g6. :crying::crying: