Hey guys,i have Lg g2 800 at&t i installed a custom LP in it,after few hours it,s touch stopped working then flash it with KK firmware but no luck then i apply hardbrick proccess on it after flashing images i flash it KK firmware then it,s touch was working auto like a ghost using it then i thought to write other firmware images on it so i did agian same proccess i was trying it to connect in qualcomm mode with pc but now when i insert cable in pc auto detect the phone in qualcomm mode 9008 i short resistence many time with cable or without cable bt whenever i connect it with pc phone auto connect in qualcomm mode,so i put the phone for 2 weeks beside today when i connect it pc it,s still same it,s same with battery or without battery and not powering on also,sorry for my bad english.it,s make me crazy dont know what to do now.Experts please
Related
Hello ... my story a little problem ... I unlock the bootloader , install a custom- karnel , root and all perfect ! 15.3.A.1.14 received the update , the download and install flashtool wanted to try to solve few hiccups ... the problem was when connected to the pc in Flashmode only the green LED is lit for a few seconds, turn off and nothing happened , from that moment on, try conecterlo the wall charger and the same thing happens and green LED turns off, the pc Coneto and achieve to recognize it as a USB input device while another device as defined by the HID compliant provider ( as 2 different devices ) and if I connect and I hold the keys precionado volume up and down is connected as Qualcomm HS- USB QDLoader 9008, pass 30 seconds and reconnect as the 2 devices ... it is clear that attempts to repair the software with Sony PC Companion and Update Service but enters as Flashmode I could not do it , I can not connect in fastboot mode .. try to be as clear as possible thank you very much beforehand ! hope can help me . sorry for my English , I'm Argentinian
chinitool said:
Hello ... my story a little problem ... I unlock the bootloader , install a custom- karnel , root and all perfect ! 15.3.A.1.14 received the update , the download and install flashtool wanted to try to solve few hiccups ... the problem was when connected to the pc in Flashmode only the green LED is lit for a few seconds, turn off and nothing happened , from that moment on, try conecterlo the wall charger and the same thing happens and green LED turns off, the pc Coneto and achieve to recognize it as a USB input device while another device as defined by the HID compliant provider ( as 2 different devices ) and if I connect and I hold the keys precionado volume up and down is connected as Qualcomm HS- USB QDLoader 9008, pass 30 seconds and reconnect as the 2 devices ... it is clear that attempts to repair the software with Sony PC Companion and Update Service but enters as Flashmode I could not do it , I can not connect in fastboot mode .. try to be as clear as possible thank you very much beforehand ! hope can help me . sorry for my English , I'm Argentinian
Click to expand...
Click to collapse
try restoring nandroid backup from cwm if you have created one.
eddiebigmouth said:
try restoring nandroid backup from cwm if you have created one.
Click to expand...
Click to collapse
is not possible because not enter recovery mode
Did you try to connect it to another PC? Because from what I can understand, it's a driver problem.
Today I also unlocked my bootloader to try Kit-Kat and I had a massive problem with drivers. Thankfully I solved it by installing the universal driver pack by Doomlord.
nicholas said:
Did you try to connect it to another PC? Because from what I can understand, it's a driver problem.
Today I also unlocked my bootloader to try Kit-Kat and I had a massive problem with drivers. Thankfully I solved it by installing the universal driver pack by Doomlord.
Click to expand...
Click to collapse
in another, no. but if I made a partition and install windows 7. because when I had that the above operating Sintema and now I have windows 8.1. equally before attempting this update had istalado istalar Sony PC Companion with all drivers
is known about this? http://forum.xda-developers.com/showpost.php?p=49715447&postcount=13
Hey ! I just uninstalled 4.4.4 cyanogenmod from my phone last week and i want it back now even with its high battery drain. Everything worked well, recognizing, rooting, flashing. Now i have problems with usb recognizing. I have debugging mode on. If the phone is turned on, no recognition problems, when i turn it off and i want to go to download mode, the pc no more recognize my phone -_-. i installed again i9500 usb drivers, still no clue. I flashed my 4.4.4 cyanogenmod and rooting and cwm recovery 1 week before and everyrthing worked perfectly, even it was first time i did something like that.
NOTE : THE PHONE IS CHARGING WHILE MY PC DOESN'T RECOGNIZE IT @ TURNED OFF
No1 wanna look there ? -_-
EDIT : Solved, i've gotta enter download mode and press 'accept' and then it recognized, i didn't remember doing that last time Thanks. anyway
Hi Guys i need to know because one person brought samsung captive bricked not charger and i charger the battery on other samsung captive i put the battery full on the phone brincked and the screen on then the phone is in mode download but one issu when i put de usb on my compute the phone don't connect on odin and i put off the phone and on phone present boot att ..... so present cyanogenmod and Miui XD have 2 OS when in miui boot the phone down and y dry again phone in home screen very slow and a wait connect the phone on my pc and don't connected.
what happend why the phone ??? i don't know is the driver phone don't have ?? i don't have idea what happen why don't connected will work driver phone with usb jig ???
HI GUYZ.
I had green screen on lg g3 d855 last day , and now I am trying to flash stock rom using Lg Flash Tool . Phone goes into Download mode and then Firmware upgrade but when it starts , after approx half of minute phone keep turning off. Hence, the upgrade failure.
I noticed that when I go into download mode , my pc detects the phone as "LG Device" ready to use , but when I start flashing the firmware , and it turns off , then Pc recognize the device as "Qualcomm HS-USB Qdloader 9008".
I assume that something wrong with Usb connection which keeps disconnecting after half of minute. even if you do nothing , still it turns off after same amount of time.
need your Help.
Hey, i want to ask you guys for help me with my E6633, i boot my phone, run camera - lag - 3buttos and force down, after that i restore twrp backup, boot up phone - next lag - force down again and game over. Cant turn on, phone no react for vibrations with 3x button combo and if i connect phone Flashtool tell me USB connectet with USB Debug Off nothing more can to do..
Model:E6633
BL unlocked
Not owner of TA backup
Flashtool not work becouse when i try to enter Flash mode, USB not recognized, drivers working fine
using Win7 64bit
USB 2.0 & 3.0 tried but not different
trying Original Sony USB Cable & one universal by Nokia both work the same..
At the last thing, notification LED not work, blue, green, pink or orange - no one of this
Xperia Companion not helped me, porgram ask for flash mode, not recognized again, so only one thing i have is Flashtool log :
- INFO - Starting phone detection
- INFO - Device connected with USB debugging off
PS: I try my E6653 and fastboot & flash are working fine, recovery & adb too
Im in the end of this, please help what to do to fix my phone, really love my Z5.
Best regards
Same problem here
I have the same problem, i've dissarm the whole phone, charge the battery and nothing. my phone died after a massive notifications then get a black screen and after that reboot with the Sony logo, and after that dead, not working, but the pc is detecting it.