[Completed] stuck - XDA Assist

someone help me , i flashed a custom rom using cwm . After flashing the rom after few hours i made a data wipe , after that the phone showed the boot logo and then went blank , It didn't went to recovery even . after few hours the battery drained , I wasn't near any pc so that i could flash stock rom now the battery is compeletly drained and my pc won't recognize my device even . someone help me please.......????

phone model :- Micromax nitro 2 e311 , processor :- MTk6592 , non - removable battery.

Luna.99 said:
someone help me , i flashed a custom rom using cwm . After flashing the rom after few hours i made a data wipe , after that the phone showed the boot logo and then went blank , It didn't went to recovery even . after few hours the battery drained , I wasn't near any pc so that i could flash stock rom now the battery is compeletly drained and my pc won't recognize my device even . someone help me please.......????
Click to expand...
Click to collapse
Luna.99 said:
phone model :- Micromax nitro 2 e311 , processor :- MTk6592 , non - removable battery.
Click to expand...
Click to collapse
Greetings,
Please do not create a thread or post more than once. You have already asked in the correct section. Please wait for a response there.
Thread closed.

Related

first real brick a110 micromax (canvas 2)

first bricked canvas 2 is in my hand
i am on suvi 7 rom..
battery is dry complet fully dry below 1%
i didnt charge or didnt even not put on charging when its dry..
now mobile is off
i charging
mobile continue-sly on charging since from last night now..
its not working even not boot up
no recovery entry....
so here is question is it really bricked how to wake up it..
plz help me
thnxxx in advance
I guess this is not correct section to post.
Listen plugin ur charger and long press your lock button for like 5 to 6 mins or more..just try, it should work.
Note : First put ur phone on charging mode via power cable
Bluehacks said:
I guess this is not correct section to post.
Listen plugin ur charger and long press your lock button for like 5 to 6 mins or more..just try, it should work.
Note : First put ur phone on charging mode via power cable
Click to expand...
Click to collapse
let me try this
sorry i dont know where to post...
people will post me this link
(GUIDE): "Hard Bricking" & "Resurrecting" the A110 made easy-
but i wanna different method
No you did not brick
nilesh.wankhede said:
first bricked canvas 2 is in my hand
i am on suvi 7 rom..
battery is dry complet fully dry below 1%
i didnt charge or didnt even not put on charging when its dry..
now mobile is off
i charging
mobile continue-sly on charging since from last night now..
its not working even not boot up
no recovery entry....
so here is question is it really bricked how to wake up it..
plz help me
thnxxx in advance
Click to expand...
Click to collapse
The same has happened to me, and I was also thinking on your line and tried all possible solution as also explained by someone here but no use.
Then I took my battery and tried it charged from some outer source.. and to my good surprise I succeeded
Then I put it back to A110 and it is working.
What I could understand that if you are on custom rom they do not support the recharge once the battery goes off completely. Hit Thanks if it helped you
buddy i had the same problem earlier
do not worry
simple solution
just download stock ics v2 and flash it through sp flash tool
[checkout the guides in development section]
every thing will be fine then
i had tried this and i was successfull
so just try it.
shadowww...
it is not bricking.....
As i understand it was not a bricking issue. the rom in which u r dosent have the support to charge the battery when it is switched off. some rom builders have provided patches for the same. you can try downloading such patches and install it frm cwm. before doing all this put your battery in some other canvas phone running in stock rom and then charge it. once you are done with it u can just put the battery back in ur device and switch it on.
No need to worry about anything, this kind of bricking once in a day always happen to me when i don't charge my phone on time , just connect ur charger wait a minute then press and hold the power button and tap menu button simultaneously, within 20-25 secs ur phone will boot, if it doesn't then disconnect the charger connect it again and again follow the whole procedure, i am sure ur fone will boot. Please let me know if it worked, n then hit the thanks button
Sent from my Micromax A110 using xda app-developers app
Please any moderator can move this thread and the other off topic threads posted in development section to their respected forums....
The development section has really got so many unsuitable threads...
Thanks.....
here is simple solution.. .. remove battery. charge it with universal charger.. ..for. 10-15 minutes.. .now keep battery in phone.. .and click power button.. .it will definitely charge
I dont know what to do! :'( Please Help
Today I tried to update my a110 to jelly bean(V3),shile updating it with sp tools,it showed an error and the process stopped,I disconnected the phone,and it is not switching on nor charging from that moment!
Please Help!
Safely Installing a ROM and Help with bricked device.
rohanmitra said:
Today I tried to update my a110 to jelly bean(V3),shile updating it with sp tools,it showed an error and the process stopped,I disconnected the phone,and it is not switching on nor charging from that moment!
Please Help!
Click to expand...
Click to collapse
I recommend you use CWM instead of SP Tools. Its a lot better and have almost 0% chances of any errors except if the zip file is corrupted or phone is switched off.
And about switching it on, I think you bricked your phone. Just go to the service centre and say that you were installing a game and a program started automatically asking you to switch off. You switched off and now its not opening. And most important thing "BE A NOOB TO THEM". Don't talk like some tech. genius. This is one of the working ways. They will repair it to the best of their knowledge, and if its not repaired, you'll get a replacement. Just remove all custom ROM related files from SD card and CWM too. Remove it from SD Card.
I did it several times when many of my friends bricked their MMX A110 installing a ROM or playing with system directory.
:good:
- Easy, you only need flash stock ics through SP Flash Tool and it'll work again
Just flash it again it might work.
Press thanks if i helped
Sent from my Micromax A116 using xda premium
Phone dead
Sonu44589 said:
I recommend you use CWM instead of SP Tools. Its a lot better and have almost 0% chances of any errors except if the zip file is corrupted or phone is switched off.
And about switching it on, I think you bricked your phone. Just go to the service centre and say that you were installing a game and a program started automatically asking you to switch off. You switched off and now its not opening. And most important thing "BE A NOOB TO THEM". Don't talk like some tech. genius. This is one of the working ways. They will repair it to the best of their knowledge, and if its not repaired, you'll get a replacement. Just remove all custom ROM related files from SD card and CWM too. Remove it from SD Card.
I did it several times when many of my friends bricked their MMX A110 installing a ROM or playing with system directory.
:good:
Click to expand...
Click to collapse
Bro i gave my phone has suffered from same problem. i gave to mmx care but now they r returning it without repairing. problem is i have misplaced my bill now n i cant go back to them asking them to replace the phone. please help!!!
Ak****banta said:
....moderator can move this thread .....
Click to expand...
Click to collapse
+1. and op has not responded to 'help posts' or even clicked 'thanks'.....
dont panic
krthkrao said:
Bro i gave my phone has suffered from same problem. i gave to mmx care but now they r returning it without repairing. problem is i have misplaced my bill now n i cant go back to them asking them to replace the phone. please help!!!
Click to expand...
Click to collapse
i had this prob too,wen i dried it up intentionally while trying to calibrate my battery...
our mobile cannot charge the battery when it is entirely dried up , so take ur battery to the local mobile repair shop and ask for a "Battery Boost" thy will charge ur battery it with some specific device , this is usually done for the mobile batteries which were not used for long time to get it running again..
btw did u try booting your phone with another battery! ??
Read my guide on canvas2 recovery
dileepworld.blogspot.in
Sent from my Micromax A110 using xda app-developers app
rohanmitra said:
Today I tried to update my a110 to jelly bean(V3),shile updating it with sp tools,it showed an error and the process stopped,I disconnected the phone,and it is not switching on nor charging from that moment!
Please Help!
Click to expand...
Click to collapse
Here Is Tutorial Speacially for you :- https://www.youtube.com/watch?v=u2lqUXJi9vQ
Watch it.
Hope I helped
Hit :good:

[Completed] [q] no cwm , disabled usb debug , unspecified driver , no boot

HELP OR ASSIST PLEASE , :crying:
My device doesn't startup/boot since
Accidentally deleted some folder and files on Root directory
I try to Charge several times my Battery, also bought a new one.
But it doesn't fix, startup or boot my Device
-
The Reason is : I try to flash some Tweaks , on SuperCharger v6
Expecting for some Better result's on my device , but it only keeps my Battery Drain so fast .
I try to Remove the SuperCharger v6 but accidentally Deleted some Folders
Also i deleted , SuperChargerv6 File .
I didn't intentionally check those folders , i just mistouch and deleted some folder w/ files using Root Explorer on it ,
The folders is on Root directory ,
This is the name of Folder's : ( /dev & /system )
-
i can't be detected on ADB since my Driver is Unspecified
and it only shows " Qualcomm CDMA Technologies MSM "
And it installed or it turns to Human Interface Device "USB Input Device"
What should i do if it doesn't Detect my device when i try to type in adb : adb shell
no devices is showing
This is my device : Starmobile ICON
Specs :
Starmobile Icon Specifications
1.2GHz quad-core Qualcomm Snapdragon MSM8225Q processor
4.5-inch qHD (540x960) IPS capacitive dipslay, 245ppi
Multi-touch with Asahi Dragontrail Glass
350MHz Adreno 203 GPU
Android 4.1.2 (Jelly Bean)
1GB of RAM
4GB of Internal Storage
microSD card slot up 32GB
3G/HSPA (WCDMA 850/2100)
HSDPA 7.2mbps / HSUPA 5.76mbps
GSM 850/900/1800/1900 (Quad-band)
WiFi 802.11 b/g/n / WiFi Hotspot
microUSB v2.0 / Bluetooth
Li-Ion 1,800mAh Battery
Light / Proximity / Gravity Sensor
Iam begging for answer and helps :crying:
Actually this is my first time to post this kind of thread i hope someone could really help me with this
This is my only Phone i keep this a couple of months , but i can't afford to lose this my father will kick my ass and kill me if he will know this phone had this problem
Hi
Thanks for writing to us at XDA Assist. Well, you're in a bit (actually, a lot) of trouble here. By deleting /system you've completely erased your operating system, so there's absolutely no way your phone is going to boot no matter how many new batteries you put into it, there's no operating system for the phone to boot into. I need some more information please, does the device power on at all? Do you see a never-ending boot animation? Or are there absolutely no signs of life from the phone?
timmaaa said:
Hi
Thanks for writing to us at XDA Assist. Well, you're in a bit (actually, a lot) of trouble here. By deleting /system you've completely erased your operating system, so there's absolutely no way your phone is going to boot no matter how many new batteries you put into it, there's no operating system for the phone to boot into. I need some more information please, does the device power on at all? Do you see a never-ending boot animation? Or are there absolutely no signs of life from the phone?
Click to expand...
Click to collapse
Thank you so much for Response sir :crying:
Absolutely no Boot , No sign of anything . but when i try to put a new Battery on it , it boot for a couple of times :
Logo of Carrier after 4 tries of booting , coz iam hoping to boot in to Bootloader , stock recovery and trying if CWM still exist
It turns back to deadboot , and no startup no power , but still Detectable at my Desktop
My desktop is Windows 7 ultimate x64-bit Service pack 1 , is it possible or how can i forcely Flash system.ext4.tar or /system File on it ? and is it Okay or Possible to flash a Firmware that comes from another Model/Device that has same Specifications ?
i try to explore and search deep on any GSM or related to my problems ,
Try some " how to install driver of Qualcomm MSM8225Q , how to install qualcomm drivers , how to flash on ADB , but still no luck ..
Also on my Starmobile ICON , this is one of my Problem, is Where do i hell can i get this phone model FIRMWARE Thats what the tech told me " Only Stock Firmware is my Main Solution "
Please help me iam just a teenager , can't afford to buy a new one , and still hoping to revive my Phone
Anyway tnx again from your response sir :crying:
rekz100 said:
Thank you so much for Response sir :crying:
Absolutely no Boot , No sign of anything . but when i try to put a new Battery on it , it boot for a couple of times :
Logo of Carrier after 4 tries of booting , coz iam hoping to boot in to Bootloader , stock recovery and trying if CWM still exist
It turns back to deadboot , and no startup no power , but still Detectable at my Desktop
My desktop is Windows 7 ultimate x64-bit Service pack 1 , is it possible or how can i forcely Flash system.ext4.tar or /system File on it ? and is it Okay or Possible to flash a Firmware that comes from another Model/Device that has same Specifications ?
i try to explore and search deep on any GSM or related to my problems ,
Try some " how to install driver of Qualcomm MSM8225Q , how to install qualcomm drivers , how to flash on ADB , but still no luck ..
Also on my Starmobile ICON , this is one of my Problem, is Where do i hell can i get this phone model FIRMWARE Thats what the tech told me " Only Stock Firmware is my Main Solution "
Please help me iam just a teenager , can't afford to buy a new one , and still hoping to revive my Phone
Anyway tnx again from your response sir :crying:
Click to expand...
Click to collapse
Unfortunately I can't find any stock firmware for your device anywhere so your options are pretty limited. You can try asking your question here:
Android Q&A, Help & Troubleshooting
If you're unable to get help there then I think your only option is to take the device to a service centre and have it inspected by professionals.
timmaaa said:
Unfortunately I can't find any stock firmware for your device anywhere so your options are pretty limited. You can try asking your question here:
Android Q&A, Help & Troubleshooting
If you're unable to get help there then I think your only option is to take the device to a service centre and have it inspected by professionals.
Click to expand...
Click to collapse
By the way tnx again :crying: :crying: :crying: :crying: :crying:
Thread closed, thanks.

[Completed] device keeps rebooting

hi . i have an Allview x2soul ( a rebranded gionee elife s5.5) and since a week ago i am facing random reboot problems. when i am in recovery (twrp 2.8.6) the device is not rebooting , is working normaly but when it fully boots it is restarting imediatly or after few minutes . i"ve tried flashing another custom rom but no succes , i"ve used battery calibration but without succes. today i"ve flashed the stock rom from gionee s5.5 kk , and as üsual" it rebooted but i"ve seen something strange . the phone was plugged and the charging screen popped up showing low battery (it was the screen from the original rom) after that the battery screen from gionee popped up showing 68 % battery and after that it booted into system . now [email protected] flashed a custom rom ported by me ( pussyfap v4 beast edition mt 6592 ) and the reboots are a bit fewer than the reboots from the gionee rom . any advice ? i don"t think that the battery is dead because in twrp is doing just fine . thanks in advance
Hi,
Try posting your question here:
Android Q&A, Help & Troubleshooting
The experts there may be able to help.
Good luck!

Help me please , phone corrupted after 5 months from installing custom ROM LOLIPOP

Hello all , i've installed Custom ROM LOLIPOP according to tutorial on this forum , but after 5 months i woke up and found my phone all service has been stopped , i've restarted the phone , but the phone was stuck at Sony logo , and nothing happens , i've tried to flash the ROM files again but i got message ' Ooops , You did it again ' , i went to someone that work on mobile phone development , and he told me that the RAM has been corrupted , but i'm not sure of what he said , i can open recovery mode , but i can't do anything , please help me , i've tried to connect phone to PC by Emma Sony program , it recognized the phone model and serial number but it told me message that mobile is locked , please help me
[email protected] said:
Hello all , i've installed Custom ROM LOLIPOP according to tutorial on this forum , but after 5 months i woke up and found my phone all service has been stopped , i've restarted the phone , but the phone was stuck at Sony logo , and nothing happens , i've tried to flash the ROM files again but i got message ' Ooops , You did it again ' , i went to someone that work on mobile phone development , and he told me that the RAM has been corrupted , but i'm not sure of what he said , i can open recovery mode , but i can't do anything , please help me , i've tried to connect phone to PC by Emma Sony program , it recognized the phone model and serial number but it told me message that mobile is locked , please help me
Click to expand...
Click to collapse
Since you can reach recovery mode,
Try flashing the rom I released few days ago in the development section.
Press thanks if I helped you
Sent from my C2305 using Tapatalk
abhishekr700 said:
Since you can reach recovery mode,
Try flashing the rom I released few days ago in the development section.
Press thanks if I helped you
Sent from my C2305 using Tapatalk
Click to expand...
Click to collapse
Dear , i appreciate your help, i have flashed your wonderful ROM, but it stops at 45% Extract:/system/lib/libicui18n.so , i've waited about 30 mins but nothing happens , i've tried it again and the same situation happened.
I just want to tell you that when checking system info menu item i got that system size used and free : -1 MB and internal size the same : -1 MB , Would it help ?
Thanks in advance.
[email protected] said:
Dear , i appreciate your help, i have flashed your wonderful ROM, but it stops at 45% Extract:/system/lib/libicui18n.so , i've waited about 30 mins but nothing happens , i've tried it again and the same situation happened.
I just want to tell you that when checking system info menu item i got that system size used and free : -1 MB and internal size the same : -1 MB , Would it help ?
Thanks in advance.
Click to expand...
Click to collapse
First of all to say thanks,you can press the thanks button on his/her post,it helps keeping xda clean and on track.
Now as for your problem what I think is that your system partition memory has corrupted,
Recovery is stored on separate partition so you are still able to access it.
Elsewhere your motherboard and all is intact cause you can run the rom installer and execute commands to.
I strongly recommend getting your phone to a service centre for help,
Noone here(I guess) can help you deal with hardware issues.
One more thing, have you tried restoring your system via wmshua flash tool,
You can find its tutorial easily in the forum. Try it before spending money
Press the thanks button if I helped you.
Sent from my C2305 using Tapatalk

How do I fix my soft bricked Gionee F100 in bootloop

hello everyone !
I got a Gionee f100 few days back .. I noticed each time it was turned on it displays a 4glte animation, which want cool to me .. so last night I went on with the idea of changing the boot animation.zip , which didn't work until this morning .. I was so happy to have a Gionee animation on my phone's startup screen .. to my surprise it got stuck and latet rebooted it self ..
and got stuck again .. I've tried everything which I read online .. N.B .. my phone doesn't enter the factory mode no more .. please guys how do I fix this ?? ..
Flash custom or stock rom.
Thank you my friend !..
I gave it to a mobile engineer .. he returned it saying my phone is a clone .. but I don't believe him because .. it is running what a normal Gionee re F100 should ..
And I rooted it my self .. KingRoot displayed the information : GiONEE F100 with other details ..
Does it mean my phone is truly a clone .. cos I don't think KingRoot would lie .. can it ??
Please help !!
You have to put your phone at download mode or fastboot mode then you have to connect it to your computer then use adb software to factory reset your phone and try to install TWRP or i prefer {redwolf TWRP} using adb software or use mi tool to install it and then flash Supersu or i prefer magisk module.
Your phone will be fine after factory reset
Kahoan said:
Flash custom or stock rom.
Click to expand...
Click to collapse
Thanks Kahoan .. I downloaded the flash file of my phone and with the help of Spflashtool I was able to bring my phone back to life !! Thanks everyone I really appreciate !!
Pdrood said:
hello everyone !
I got a Gionee f100 few days back .. I noticed each time it was turned on it displays a 4glte animation, which want cool to me .. so last night I went on with the idea of changing the boot animation.zip , which didn't work until this morning .. I was so happy to have a Gionee animation on my phone's startup screen .. to my surprise it got stuck and latet rebooted it self ..
and got stuck again .. I've tried everything which I read online .. N.B .. my phone doesn't enter the factory mode no more .. please guys how do I fix this ?? ..
Click to expand...
Click to collapse
Hello,
Please i have a similar problem with my phone,. whenever i install new app and restarts the phone it gets stucked into boot loop at the animation. I searched for stock rom online to reset it, apparently i used the wrong one and now my phone is not coming on,not responding at all.
I need your help,
Thanks

Categories

Resources