first bricked canvas 2 is in my hand
i am on suvi 7 rom..
battery is dry complet fully dry below 1%
i didnt charge or didnt even not put on charging when its dry..
now mobile is off
i charging
mobile continue-sly on charging since from last night now..
its not working even not boot up
no recovery entry....
so here is question is it really bricked how to wake up it..
plz help me
thnxxx in advance
I guess this is not correct section to post.
Listen plugin ur charger and long press your lock button for like 5 to 6 mins or more..just try, it should work.
Note : First put ur phone on charging mode via power cable
Bluehacks said:
I guess this is not correct section to post.
Listen plugin ur charger and long press your lock button for like 5 to 6 mins or more..just try, it should work.
Note : First put ur phone on charging mode via power cable
Click to expand...
Click to collapse
let me try this
sorry i dont know where to post...
people will post me this link
(GUIDE): "Hard Bricking" & "Resurrecting" the A110 made easy-
but i wanna different method
No you did not brick
nilesh.wankhede said:
first bricked canvas 2 is in my hand
i am on suvi 7 rom..
battery is dry complet fully dry below 1%
i didnt charge or didnt even not put on charging when its dry..
now mobile is off
i charging
mobile continue-sly on charging since from last night now..
its not working even not boot up
no recovery entry....
so here is question is it really bricked how to wake up it..
plz help me
thnxxx in advance
Click to expand...
Click to collapse
The same has happened to me, and I was also thinking on your line and tried all possible solution as also explained by someone here but no use.
Then I took my battery and tried it charged from some outer source.. and to my good surprise I succeeded
Then I put it back to A110 and it is working.
What I could understand that if you are on custom rom they do not support the recharge once the battery goes off completely. Hit Thanks if it helped you
buddy i had the same problem earlier
do not worry
simple solution
just download stock ics v2 and flash it through sp flash tool
[checkout the guides in development section]
every thing will be fine then
i had tried this and i was successfull
so just try it.
shadowww...
it is not bricking.....
As i understand it was not a bricking issue. the rom in which u r dosent have the support to charge the battery when it is switched off. some rom builders have provided patches for the same. you can try downloading such patches and install it frm cwm. before doing all this put your battery in some other canvas phone running in stock rom and then charge it. once you are done with it u can just put the battery back in ur device and switch it on.
No need to worry about anything, this kind of bricking once in a day always happen to me when i don't charge my phone on time , just connect ur charger wait a minute then press and hold the power button and tap menu button simultaneously, within 20-25 secs ur phone will boot, if it doesn't then disconnect the charger connect it again and again follow the whole procedure, i am sure ur fone will boot. Please let me know if it worked, n then hit the thanks button
Sent from my Micromax A110 using xda app-developers app
Please any moderator can move this thread and the other off topic threads posted in development section to their respected forums....
The development section has really got so many unsuitable threads...
Thanks.....
here is simple solution.. .. remove battery. charge it with universal charger.. ..for. 10-15 minutes.. .now keep battery in phone.. .and click power button.. .it will definitely charge
I dont know what to do! :'( Please Help
Today I tried to update my a110 to jelly bean(V3),shile updating it with sp tools,it showed an error and the process stopped,I disconnected the phone,and it is not switching on nor charging from that moment!
Please Help!
Safely Installing a ROM and Help with bricked device.
rohanmitra said:
Today I tried to update my a110 to jelly bean(V3),shile updating it with sp tools,it showed an error and the process stopped,I disconnected the phone,and it is not switching on nor charging from that moment!
Please Help!
Click to expand...
Click to collapse
I recommend you use CWM instead of SP Tools. Its a lot better and have almost 0% chances of any errors except if the zip file is corrupted or phone is switched off.
And about switching it on, I think you bricked your phone. Just go to the service centre and say that you were installing a game and a program started automatically asking you to switch off. You switched off and now its not opening. And most important thing "BE A NOOB TO THEM". Don't talk like some tech. genius. This is one of the working ways. They will repair it to the best of their knowledge, and if its not repaired, you'll get a replacement. Just remove all custom ROM related files from SD card and CWM too. Remove it from SD Card.
I did it several times when many of my friends bricked their MMX A110 installing a ROM or playing with system directory.
:good:
- Easy, you only need flash stock ics through SP Flash Tool and it'll work again
Just flash it again it might work.
Press thanks if i helped
Sent from my Micromax A116 using xda premium
Phone dead
Sonu44589 said:
I recommend you use CWM instead of SP Tools. Its a lot better and have almost 0% chances of any errors except if the zip file is corrupted or phone is switched off.
And about switching it on, I think you bricked your phone. Just go to the service centre and say that you were installing a game and a program started automatically asking you to switch off. You switched off and now its not opening. And most important thing "BE A NOOB TO THEM". Don't talk like some tech. genius. This is one of the working ways. They will repair it to the best of their knowledge, and if its not repaired, you'll get a replacement. Just remove all custom ROM related files from SD card and CWM too. Remove it from SD Card.
I did it several times when many of my friends bricked their MMX A110 installing a ROM or playing with system directory.
:good:
Click to expand...
Click to collapse
Bro i gave my phone has suffered from same problem. i gave to mmx care but now they r returning it without repairing. problem is i have misplaced my bill now n i cant go back to them asking them to replace the phone. please help!!!
Ak****banta said:
....moderator can move this thread .....
Click to expand...
Click to collapse
+1. and op has not responded to 'help posts' or even clicked 'thanks'.....
dont panic
krthkrao said:
Bro i gave my phone has suffered from same problem. i gave to mmx care but now they r returning it without repairing. problem is i have misplaced my bill now n i cant go back to them asking them to replace the phone. please help!!!
Click to expand...
Click to collapse
i had this prob too,wen i dried it up intentionally while trying to calibrate my battery...
our mobile cannot charge the battery when it is entirely dried up , so take ur battery to the local mobile repair shop and ask for a "Battery Boost" thy will charge ur battery it with some specific device , this is usually done for the mobile batteries which were not used for long time to get it running again..
btw did u try booting your phone with another battery! ??
Read my guide on canvas2 recovery
dileepworld.blogspot.in
Sent from my Micromax A110 using xda app-developers app
rohanmitra said:
Today I tried to update my a110 to jelly bean(V3),shile updating it with sp tools,it showed an error and the process stopped,I disconnected the phone,and it is not switching on nor charging from that moment!
Please Help!
Click to expand...
Click to collapse
Here Is Tutorial Speacially for you :- https://www.youtube.com/watch?v=u2lqUXJi9vQ
Watch it.
Hope I helped
Hit :good:
Related
i was using ROM manager on my galaxy fit.. by mistake i clicked the option "backup current MOD"... n den the phone screen got blank n it turnd off..
i tried a lot, even removed the battery n reinserted it.. but its not getting switched on..
is my device bricked?? what to do? please help.....!!!!
Take out ur battery and sim insert battery the quivkly omset data cable
Now on ur phone into downlofing mode flash with odim
I think you need to go to samsung service centre.According to terms and conditions of samsung you have lost your warranty by rooting your phone.BUT THERES A WAY.JUST REMOVE SD CARD FROM YOUR PHONE(bcoz root is in your sd card) AND GO TO THE SERVICE CENTRE AND COMPLAIN THEM THAT YOUR PHONE WAS DISCHARGED AND WHEN YOU TRIED TO START IT AGAIN NOTHING HAPPENED. NEVER ACCEPT THAT YOU HAVE ROOTED YOUR PHONE AND THATS IT! Even I had once bricked my phone and this trick worked.now I have my g fit without any issues or losing warranty.
Best of luck!
Sent from my GT-S5670 using XDA App
No brother, the Root File ( SuperUser ) resides in the Phone Memory....
Better still follow the flashing methods, look up the android dev forum. They are really simple once u get a hang of it
rizwan.choudhury99 said:
i was using ROM manager on my galaxy fit.. by mistake i clicked the option "backup current MOD"... n den the phone screen got blank n it turnd off..
i tried a lot, even removed the battery n reinserted it.. but its not getting switched on..
is my device bricked?? what to do? please help.....!!!!
Click to expand...
Click to collapse
Man try xda unbricker I also bricked ma mini once wide rom manager
And if it doesn't works go to Samsung service center the will repair ur phone and their is no possibility of knowing that u have rooted your phone they will make ur phone work and they will do a hard restore means u need to really root ur phone and a warning
Never use rom manager again
and download clock work recovery for ur phone and flash it through Odin and when installing don't forgot to click one package.
Sent from my GT-S5570 using xda premium
Hi everyone!
A friend of mine found a samsung wave 2. Because it was locked with a password i tried to flash new firmware on it with multiloader.
It gave an error and now i can't get into download mode anymore, it appears on the screen for half a second and then the phone reboots.
I also can't charge it anymore because if i plug it in, the empty battery appears, and the phone reboots after 15 seconds. It doesn't seem to charge and i guess that's why i cant stay in download mode. Also it gets quite hot while charging...
Any ideas how to fix this? I've found numerous topics spread across the internet but none give a real solution :s
Thanks in advance.
Flash a stock firmware using Odin. That should help.
Press thanks if I've helped you
Sent from my GT-P5110 using XDA Premium HD app
No you didnt help, but i managed to charge the battery by wiring it to my galaxy s2, quite dangerous imo
but i succeeded and managed to get into download mode without rebooting, SOLVED
Bricked samsung waves s8530
I have samsung wave s8530... I had tried to flash the same using the turko Cfw version 9,but could not do it correctly... Now the phone is not switching on. And also not going into download mode... Wat should I do plz help
bango7886 said:
I have samsung wave s8530... I had tried to flash the same using the turko Cfw version 9,but could not do it correctly... Now the phone is not switching on. And also not going into download mode... Wat should I do plz help
Click to expand...
Click to collapse
So... Looks like it's hard bricked ... So ... just go to an Authorised service centre, and Play Dumb. Just tell that suddenly your phone wouldn't turn on and that you donno what happened (don't tell about rooting or anything) .... So, depending on how well you acted and how dumb the service centre people are, you 'may' get a replacement under warranty ..
ndmicH perfectly
niranjan94 said:
So... Looks like it's hard bricked ... So ... just go to an Authorised service centre, and Play Dumb. Just tell that suddenly your phone wouldn't turn on and that you donno what happened (don't tell about rooting or anything) .... So, depending on how well you acted and how dumb the service centre people are, you 'may' get a replacement under warranty ..
Click to expand...
Click to collapse
Thanks for the advise.... But is there a way I can myself unbrick the moblie?
bango7886 said:
Thanks for the advise.... But is there a way I can myself unbrick the moblie?
Click to expand...
Click to collapse
No ... i don't think so ... SInce you can't even turn on the phone ... the answer is No ... sorry ...
works condya
Thanks dude.... Tried to flash it once again.... 100% success...
Hhahahaha epic! i fixed it
I used the battery of my galaxy s2 (which has 1 more connection pin and a is lot larger) with some super technical skills and managed to flash a new rom and it worked!
hello,
i am new user of android platform...i dont know whether it is a right section to post or not...i know little about rooting, i have read it some where...so my problem is that i have bought new karbonn a27 retina but from starting it heats up too much near its speaker above screen..it heats during calling, charging, playing almost whole day...and one big problem is that it hangs toooooooo much...i went to service centre but response from them was null..so with hope i am posting here...i need some answers...
1. please post me links to threads about rooting, kernels, roms..so dat i can learn all..
2. i want to root my phone..so plz tell me the guide
3. i dont know much about kernel but my friend told me dat about kernal...i want low kernel..so dat my mobile run smooths and not heat up too much..
4. lastly tell me how to increase my mobile speed so dat i can play games and use it smoothly...any method..
A27 root
u can use root master to root ur A27. but I still didn't find any cwm recovery. plz if anyone know abt it post a way or link here
Karbonn A27
After struggling for months, I was finally able to root my Karbonn A27 using Root Master. Soon after rooting, I couldn't resist the urge to install a custom rom.The stock rom was giving me a lot of issues, one of the major problem being the heating issue.
So as a next step, I tried to flash the recovery. I took a chance and flashed the CWMrecovery which was not meant for my device. (The CWM I used was actually meant for Karbonn A21)
As a result of that, I got my phone bricked. (Soft bricked caught on bootloop) Luckily, I am able to put the phone on Fastboot mode though.
To unbrick my phone, I understand that I need to find the stock rom for my device. So that I can re-flash all the images in Fastboot mode. The problem is I am not to find the Stock Rom on the internet. Please let me know if there is any other alternate way to get out of jail.
Notable things:
1) One interested thing, that I would like to share about my phone is that, while booting if I press the "power and up arrow" button together it takes me to weird screen showing hardware information. It does nothing after that, I will have to remove and reinsert the battery to make it boot again.
2) Another thing, after restarting the phone by pressing the power button later if I press the "UP and DOWN" arrow key together. It takes me to another screen which reads "Fastboot" mode displaying options for recovery and factory reset.
karbonn a27 root
hi my phone is karbon a27 is full not work to hd game or hd videos plz sent me root link
Did you find it ?
gpoup for karbonn a27 retina
hello everyone , in vietnam , there is a group for this phone , plz log in facebook and then search " Q-Smart Miracle Mach "
Last week my phone:laugh: rebooted again and again showing the "android robot" sign ...I submitted my phone to micromax service centre ..They told me that it will take around 15-20 days for the repair since its a motherboard problem...I kept it for 20 days...After the repair I used it for half of the day..When I came home I thought of clean installing new apps after doing a factory reset from the setting...After i did that I was able to use my phone perfectly normal...I installed quality games and useful apps from the appstore.....Then after sometime I noticed that I was not able to do any calls nor I recieved any calls,...The network sign status was perfect above and I went and showed it the next day again to the micromax centre ...They told me why I did a factory reset...?Also they told me nonsense :laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh: that if u do factory rest u r imei will get erased.They took my phone checked my imei number ...It showed invalid to them...They again put and gave me my imei number and warneed me not to reset my phone.... Now I have bought my phone back ...I want to simply do a clean install of stock jelly bean rom and dont want that Imei erasing problem...What should I do...??????
U can get ur imei no. Back...even I have faced the same Problem..just go into the engineering mode then in the connectivity column goto cds information and then to radio information and then phone 1--- type AT+EGMR=1,7,"" within the inverted comma put ur first imei no..and hit (send at command). And similarly in phone 2 type at+egmr=1,10"" and put your second imei no.and hit send at command ...then just reboot...it works...
U can find your imei no a the back where u put ur battery. With bar code the first is for phone 1 and below that for phone 2
Sent from my Micromax A110 (Canvas 2) using xda app-developers app
thanks a lot bro
thanks a lot brother. i've solved my imei problem with ur solution. really thanks a lot. urs is ultimate solution
:good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good:
i've one more problem bro.. that is even my phone is in debugging enabled mode my pc is showing me to put my phone in debugging mode. so could u do some help here kindly. & i want to root my phone& i've tried framaroot, z4root, z4 zte blade root, terminal emulator method, but no use, so pls help me to root my phone. to root it, it should be connected & detected by my pc with debugging enabled mode observed by my pc. so pls help me
chaitu.swaroop said:
thanks a lot brother. i've solved my imei problem with ur solution. really thanks a lot. urs is ultimate solution
:good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good:
i've one more problem bro.. that is even my phone is in debugging enabled mode my pc is showing me to put my phone in debugging mode. so could u do some help here kindly. & i want to root my phone& i've tried framaroot, z4root, z4 zte blade root, terminal emulator method, but no use, so pls help me to root my phone. to root it, it should be connected & detected by my pc with debugging enabled mode observed by my pc. so pls help me
Click to expand...
Click to collapse
Guess you are on jb 4.1.1. So in this case, bin4ry method and some others may not work.
Pls use THIS GUIDE TO ROOT YOUR PHONE.
It explains everything in detail.
But before trying the above,don't forget to install proper drivers,or nothing will happen(flashing won't start). Use THIS GUIDE TO INSTALL PROPER DRIVERS FOR CANVAS 2
Sent from my I9300 using xda premium
Dear Sirs,
My daughter is using a Celkon A119Q HD (Stock Rom is available needrom ). The device uses a MTK6589.
Recently, my friend flashed the wrong preloader on my phone and hard bricked it. Currently it doesn turn on, no display nothing. Me being an idiot did not take a backup using MTK droid tools and I dont have CWM recovery on my phone. So I decided to flash my phone with the stock rom.
I have installed all the necessary drivers and When I connect my phone to SP Flash tools, it is able to identify it. It says "Mediatek DA USB VCOM (Android) (COM5)". However I am unabe to flash it at all. I have tried format, format without boot loader, firmware->upgrade, format all + download, download only and even ran a memory test.
Absolutely nothing seems to work. I have attached the various screenshots of the error messages I get.
I would deeply be in your dept if you could kindly help me and guide me as to what I should do next Sir, since my daughter has been giving me hell over her phone.
:crying:
Thank you very much for the help. I sincerely appreciate it.
Can't figure out, What you mean by a 'Preloader' but looks like you've bumped...
N'ayam Amarsh'e said:
Can't figure out, What you mean by a 'Preloader' but looks like you've bumped...
Click to expand...
Click to collapse
he was trying to install a custom ROM and flashed the PRELOADER first...the process stopped halfway through and the phone has been bricked ever since.. :crying:
rakave said:
Dear Sirs,
My daughter is using a Celkon A119Q HD (Stock Rom is available needrom ). The device uses a MTK6589.
Recently, my friend flashed the wrong preloader on my phone and hard bricked it. Currently it doesn turn on, no display nothing. Me being an idiot did not take a backup using MTK droid tools and I dont have CWM recovery on my phone. So I decided to flash my phone with the stock rom.
I have installed all the necessary drivers and When I connect my phone to SP Flash tools, it is able to identify it. It says "Mediatek DA USB VCOM (Android) (COM5)". However I am unabe to flash it at all. I have tried format, format without boot loader, firmware->upgrade, format all + download, download only and even ran a memory test.
Absolutely nothing seems to work. I have attached the various screenshots of the error messages I get.
I would deeply be in your dept if you could kindly help me and guide me as to what I should do next Sir, since my daughter has been giving me hell over her phone.
:crying:
Thank you very much for the help. I sincerely appreciate it.
Click to expand...
Click to collapse
did you try to restock it.. installing a stock rom is the last option if available.. if the phone is not even turning on, check battery.. make sure your battery is charged..
and at last.. you could just try taking it to the service center if it's in warrenty.. but make sure it doesn't turn on.. don't tell them you were flashing.. they will never know.. hope it help in any way..
btw check out my signature...