Database Info

my android got bricked...

i was using ROM manager on my galaxy fit.. by mistake i clicked the option "backup current MOD"... n den the phone screen got blank n it turnd off..
i tried a lot, even removed the battery n reinserted it.. but its not getting switched on..
is my device bricked?? what to do? please help.....!!!!

Take out ur battery and sim insert battery the quivkly omset data cable
Now on ur phone into downlofing mode flash with odim

I think you need to go to samsung service centre.According to terms and conditions of samsung you have lost your warranty by rooting your phone.BUT THERES A WAY.JUST REMOVE SD CARD FROM YOUR PHONE(bcoz root is in your sd card) AND GO TO THE SERVICE CENTRE AND COMPLAIN THEM THAT YOUR PHONE WAS DISCHARGED AND WHEN YOU TRIED TO START IT AGAIN NOTHING HAPPENED. NEVER ACCEPT THAT YOU HAVE ROOTED YOUR PHONE AND THATS IT! Even I had once bricked my phone and this trick worked.now I have my g fit without any issues or losing warranty.
Best of luck!
Sent from my GT-S5670 using XDA App

No brother, the Root File ( SuperUser ) resides in the Phone Memory....
Better still follow the flashing methods, look up the android dev forum. They are really simple once u get a hang of it

rizwan.choudhury99 said:
i was using ROM manager on my galaxy fit.. by mistake i clicked the option "backup current MOD"... n den the phone screen got blank n it turnd off..
i tried a lot, even removed the battery n reinserted it.. but its not getting switched on..
is my device bricked?? what to do? please help.....!!!!
Click to expand...
Click to collapse
Man try xda unbricker I also bricked ma mini once wide rom manager
And if it doesn't works go to Samsung service center the will repair ur phone and their is no possibility of knowing that u have rooted your phone they will make ur phone work and they will do a hard restore means u need to really root ur phone and a warning
Never use rom manager again
and download clock work recovery for ur phone and flash it through Odin and when installing don't forgot to click one package.
Sent from my GT-S5570 using xda premium

first real brick a110 micromax (canvas 2)

first bricked canvas 2 is in my hand
i am on suvi 7 rom..
battery is dry complet fully dry below 1%
i didnt charge or didnt even not put on charging when its dry..
now mobile is off
i charging
mobile continue-sly on charging since from last night now..
its not working even not boot up
no recovery entry....
so here is question is it really bricked how to wake up it..
plz help me
thnxxx in advance

I guess this is not correct section to post.
Listen plugin ur charger and long press your lock button for like 5 to 6 mins or more..just try, it should work.
Note : First put ur phone on charging mode via power cable

Bluehacks said:
I guess this is not correct section to post.
Listen plugin ur charger and long press your lock button for like 5 to 6 mins or more..just try, it should work.
Note : First put ur phone on charging mode via power cable
Click to expand...
Click to collapse
let me try this
sorry i dont know where to post...
people will post me this link
(GUIDE): "Hard Bricking" & "Resurrecting" the A110 made easy-
but i wanna different method

No you did not brick
nilesh.wankhede said:
first bricked canvas 2 is in my hand
i am on suvi 7 rom..
battery is dry complet fully dry below 1%
i didnt charge or didnt even not put on charging when its dry..
now mobile is off
i charging
mobile continue-sly on charging since from last night now..
its not working even not boot up
no recovery entry....
so here is question is it really bricked how to wake up it..
plz help me
thnxxx in advance
Click to expand...
Click to collapse
The same has happened to me, and I was also thinking on your line and tried all possible solution as also explained by someone here but no use.
Then I took my battery and tried it charged from some outer source.. and to my good surprise I succeeded
Then I put it back to A110 and it is working.
What I could understand that if you are on custom rom they do not support the recharge once the battery goes off completely. Hit Thanks if it helped you

buddy i had the same problem earlier
do not worry
simple solution
just download stock ics v2 and flash it through sp flash tool
[checkout the guides in development section]
every thing will be fine then
i had tried this and i was successfull
so just try it.
shadowww...

it is not bricking.....
As i understand it was not a bricking issue. the rom in which u r dosent have the support to charge the battery when it is switched off. some rom builders have provided patches for the same. you can try downloading such patches and install it frm cwm. before doing all this put your battery in some other canvas phone running in stock rom and then charge it. once you are done with it u can just put the battery back in ur device and switch it on.

No need to worry about anything, this kind of bricking once in a day always happen to me when i don't charge my phone on time , just connect ur charger wait a minute then press and hold the power button and tap menu button simultaneously, within 20-25 secs ur phone will boot, if it doesn't then disconnect the charger connect it again and again follow the whole procedure, i am sure ur fone will boot. Please let me know if it worked, n then hit the thanks button
Sent from my Micromax A110 using xda app-developers app

Please any moderator can move this thread and the other off topic threads posted in development section to their respected forums....
The development section has really got so many unsuitable threads...
Thanks.....

here is simple solution.. .. remove battery. charge it with universal charger.. ..for. 10-15 minutes.. .now keep battery in phone.. .and click power button.. .it will definitely charge

I dont know what to do! :'( Please Help
Today I tried to update my a110 to jelly bean(V3),shile updating it with sp tools,it showed an error and the process stopped,I disconnected the phone,and it is not switching on nor charging from that moment!
Please Help!

Safely Installing a ROM and Help with bricked device.
rohanmitra said:
Today I tried to update my a110 to jelly bean(V3),shile updating it with sp tools,it showed an error and the process stopped,I disconnected the phone,and it is not switching on nor charging from that moment!
Please Help!
Click to expand...
Click to collapse
I recommend you use CWM instead of SP Tools. Its a lot better and have almost 0% chances of any errors except if the zip file is corrupted or phone is switched off.
And about switching it on, I think you bricked your phone. Just go to the service centre and say that you were installing a game and a program started automatically asking you to switch off. You switched off and now its not opening. And most important thing "BE A NOOB TO THEM". Don't talk like some tech. genius. This is one of the working ways. They will repair it to the best of their knowledge, and if its not repaired, you'll get a replacement. Just remove all custom ROM related files from SD card and CWM too. Remove it from SD Card.
I did it several times when many of my friends bricked their MMX A110 installing a ROM or playing with system directory.
:good:

- Easy, you only need flash stock ics through SP Flash Tool and it'll work again

Just flash it again it might work.
Press thanks if i helped
Sent from my Micromax A116 using xda premium

Phone dead
Sonu44589 said:
I recommend you use CWM instead of SP Tools. Its a lot better and have almost 0% chances of any errors except if the zip file is corrupted or phone is switched off.
And about switching it on, I think you bricked your phone. Just go to the service centre and say that you were installing a game and a program started automatically asking you to switch off. You switched off and now its not opening. And most important thing "BE A NOOB TO THEM". Don't talk like some tech. genius. This is one of the working ways. They will repair it to the best of their knowledge, and if its not repaired, you'll get a replacement. Just remove all custom ROM related files from SD card and CWM too. Remove it from SD Card.
I did it several times when many of my friends bricked their MMX A110 installing a ROM or playing with system directory.
:good:
Click to expand...
Click to collapse
Bro i gave my phone has suffered from same problem. i gave to mmx care but now they r returning it without repairing. problem is i have misplaced my bill now n i cant go back to them asking them to replace the phone. please help!!!

Ak****banta said:
....moderator can move this thread .....
Click to expand...
Click to collapse
+1. and op has not responded to 'help posts' or even clicked 'thanks'.....

dont panic
krthkrao said:
Bro i gave my phone has suffered from same problem. i gave to mmx care but now they r returning it without repairing. problem is i have misplaced my bill now n i cant go back to them asking them to replace the phone. please help!!!
Click to expand...
Click to collapse
i had this prob too,wen i dried it up intentionally while trying to calibrate my battery...
our mobile cannot charge the battery when it is entirely dried up , so take ur battery to the local mobile repair shop and ask for a "Battery Boost" thy will charge ur battery it with some specific device , this is usually done for the mobile batteries which were not used for long time to get it running again..
btw did u try booting your phone with another battery! ??

Read my guide on canvas2 recovery
dileepworld.blogspot.in
Sent from my Micromax A110 using xda app-developers app

rohanmitra said:
Today I tried to update my a110 to jelly bean(V3),shile updating it with sp tools,it showed an error and the process stopped,I disconnected the phone,and it is not switching on nor charging from that moment!
Please Help!
Click to expand...
Click to collapse
Here Is Tutorial Speacially for you :- https://www.youtube.com/watch?v=u2lqUXJi9vQ
Watch it.
Hope I helped
Hit :good:

Imei invalid after factory reset

I cant receive and make calls after I do factory reset of my phone ....Also I get Invalid Imei when I check by *#06#...I have to go to service centre again and again to put my imei number back after every factory reset......:crying::crying::crying::crying:..Kindly tell me what to do...I have a micromax a110 canvas 2 phone

mickeybatio said:
I cant receive and make calls after I do factory reset of my phone ....Also I get Invalid Imei when I check by *#06#...I have to go to service centre again and again to put my imei number back after every factory reset......:crying::crying::crying::crying:..Kindly tell me what to do...I have a micromax a110 canvas 2 phone
Click to expand...
Click to collapse
Those Guys out there in MMX service centre are nut xD.Okay you got your imei wiped .Its actually due to change of ur mother board.not an problem.its easy to implant it again.find ur both imei number in the packaging box .note it down in a piece of paper.now go to engineer mod and select GPRS .Choose the first sim and enter the first imei there .click write imei ---> ok , click attached--->ok ,click detached---> okay
Now repeat this for the second sim and enter the second imei.reboot the phone. Now check ur imei You can now reset your phone even for 1000 times but you have to implant it again and again every time u flash a new rom or reset

engineer mode
hi bro ur advice is a little bit helpfull to me, but the thing is before i've changed my ''''engineer mode > debug utils > debug level to 'user mode'. so my question is whether it should be in user mode or engineer mode. i'm asking u bcoz i am able to get into gprs but i didn't get any sim1 or sim2 option like that to follow ur previous steps. so pls guide me more clearly bcoz i'm a new beee.
my phone is showing no emie:crying:.
even one more doubt bro. eventhough i put my phone in usb debugging mode when i connected it to computer it is showing pls put ur phone in debugging enabled mode:crying::crying:. so how to overcome this problem. i'm unable to connect to pc.
pls help me

chaitu.swaroop said:
hi bro ur advice is a little bit helpfull to me, but the thing is before i've changed my ''''engineer mode > debug utils > debug level to 'user mode'. so my question is whether it should be in user mode or engineer mode. i'm asking u bcoz i am able to get into gprs but i didn't get any sim1 or sim2 option like that to follow ur previous steps. so pls guide me more clearly bcoz i'm a new beee.
my phone is showing no emie:crying:.
even one more doubt bro. eventhough i put my phone in usb debugging mode when i connected it to computer it is showing pls put ur phone in debugging enabled mode:crying::crying:. so how to overcome this problem. i'm unable to connect to pc.
pls help me
Click to expand...
Click to collapse
first select usb debuging option in developer optiion
then in eng mod go to radio wave option and put imi no

hi brother. thanks a lot for ur reply. i've tried what u said. but i'm unable to find that radio wave option. could u pls give the exact path so that it will be helpfull to me.
pls save my phone.
even though i put my phone in debugging enabled mode my pc is showing like pls put debugging mode on. this is another problem i am having right now. to root my phone i need this debugging mode enabled in pc. i've tried framaroot, z4root, z4 zte blade root, terminal emulator all the methods without pc i've tried to root my phone, but no use.
pls help me in this issue.
thanks a lot in advance :good:

hi brother i got a solution for my problem from addasjii a member in xda like us. thanks a lot for him & thanks for u for giving ur valuable ideas & ur valuble time for me & my posts.
the solution he has given is below
U can get ur imei no. Back...even I have faced the same Problem..just go into the engineering mode then in the connectivity column goto cds information and then to radio information and then phone 1--- type AT+EGMR=1,7,"" within the inverted comma put ur first imei no..and hit (send at command). And similarly in phone 2 type at+egmr=1,10"" and put your second imei no.and hit send at command ...then just reboot...it works...
U can find your imei no a the back where u put ur battery. With bar code the first is for phone 1 and below that for phone 2
Sent from my Micromax A110 (Canvas 2) using xda app-developers app

Download the imei writing tool for m a110 http://support.moulnisky.com/index.php?dir=Micromax/00_A Serie/A110/Tools/

What if i do not know the IMEI nos?

very easy, back on ur phone inside d battery place
kamalahasang said:
What if i do not know the IMEI nos?
Click to expand...
Click to collapse
hi fnd u can know ur imei very easily. it is just back of ur phone. remove d battery & u can have ur both imei no.s there.:laugh::laugh:
hit thanks bcoz u know to hit as i helped u.

no luck at send failed heeeeeeeeelp please
chaitu.swaroop said:
hi brother i got a solution for my problem from addasjii a member in xda like us. thanks a lot for him & thanks for u for giving ur valuable ideas & ur valuble time for me & my posts.
the solution he has given is below
U can get ur imei no. Back...even I have faced the same Problem..just go into the engineering mode then in the connectivity column goto cds information and then to radio information and then phone 1--- type AT+EGMR=1,7,"" within the inverted comma put ur first imei no..and hit (send at command). And similarly in phone 2 type at+egmr=1,10"" and put your second imei no.and hit send at command ...then just reboot...it works...
U can find your imei no a the back where u put ur battery. With bar code the first is for phone 1 and below that for phone 2
Sent from my Micromax A110 (Canvas 2) using xda app-developers app
Click to expand...
Click to collapse
fix it plzz

xdag700 said:
fix it plzz
Click to expand...
Click to collapse
IMEI is quite easy to fix ! Use MTK Droid tools to write ur imei or S/N Write tool. There are many tutorials browse through for how to use this tool !
Flashing stock ROM through SP should solve imei. First select format in sp and then flash ROM through sp. Then after first boot take imei backup as mentioned in this thread. And replace it every time u face problem !
http://forum.xda-developers.com/mic...artition-a110q-canvas-2-t2568182/post48447661
( See only IMEI related in this thread. Leave others )

Reset IMEI of A110
Hey! I have got the same problem in my Canvas HD. What I do is:-
1. goto dialer and type *#*#3646633#*#*
2. Goto CDS information
3. Goto Radio
4. On the command bar, type AT+ EGMR, 1,7"YOUR IMEI"
5. And send command
If it says command sent, then good but if not, remove SIM and try again .
6. Reboot
Note: For SIM 1, the command is AT+ EGMR, 1,7"YOUR IMEI" but for SIM 2 it is, AT+ EGMR, 1,10"YOUR IMEI"
I hope you got the answer! :fingers-crossed: :fingers-crossed:

my frnd was gettin this error so i told him this method
everything went well but after reboot his device showing the same error again plz help

[Q] Micromax funbook talk p362 touch not working

Hi frnds and experts...i hav a micromax funbook talk p362 tablet.My cousin had drawn the unlock patterns many times and it got locked, now the tablet asks to enter the email and pasword. I did that but nothing happened so i went to mobile shop and he hard reset the tablet and loaded the software again . But when he switched on the tablet its touch is not working..he says that an additional driver is missing .. How could i get that ... Plz experts help me....i shall be thankful to u all

Hello,
After a quick google, i found another thread on a forum where someone linked to a firmware. Apparantly after you flash it, it should work again.
ON the download link, one person says it worked another it doesn't. IF you don't mind flashing, i'll send you the link.
BTW. your tab doesn't work and you just take it back from the vendor if you still have warranty? You should have asked for another one, since you didn't unlock bootloader nor did you root.

Thanks
Jellybsly said:
Hello,
After a quick google, i found another thread on a forum where someone linked to a firmware. Apparantly after you flash it, it should work again.
ON the download link, one person says it worked another it doesn't. IF you don't mind flashing, i'll send you the link.
BTW. your tab doesn't work and you just take it back from the vendor if you still have warranty? You should have asked for another one, since you didn't unlock bootloader nor did you root.
Click to expand...
Click to collapse
thanks frnd bt can u tell me how can i download the driver from micromax official website... Because he was downloading it from the website.

Is it not posible to do without flashing
Is it not possible to make touch working without flashing my tablet. Can i get a password for micromax ftp servers

Rcy210 said:
Hi frnds and experts...i hav a micromax funbook talk p362 tablet.My cousin had drawn the unlock patterns many times and it got locked, now the tablet asks to enter the email and pasword. I did that but nothing happened so i went to mobile shop and he hard reset the tablet and loaded the software again . But when he switched on the tablet its touch is not working..he says that an additional driver is missing .. How could i get that ... Plz experts help me....i shall be thankful to u all
Click to expand...
Click to collapse
That person has flashed wrong firmware on your device...
Try this http://www.4shared.com/rar/j57Q3MJ6/Micromax_P362.html
Flash this ..
And then it will work.. properly :good:
BTW I also have he same tab and had this problem some months ago..

cant flash
i tried to flash by using tis tool but device is not conecting to updaTE FIRMWARE.my funbook p362 is not startingup.when switch on my tab it displays mmmx logo then goes black screen.after tat when i press unlock button it displays homescreen for a second and once again becomes black

HTC D310w bricked and restore SKU ;CID ;IMEI

OK I've found solution to restore IMEI and SKU ,CID of this dead phone after one week
After many attempts my phone works ok without that error on screen about sku ,cid and without null imei now
For those with bricked htc d310w if help needed just pm and i will reply asap

Dear brother, i have similar problem which happened after flashing custom rom on htc desire 310 dual sim. the phone cant detect any network and all sim slots reads null invalid imei also is prompting for SKU, CID. Please help.
victormm.uk said:
OK I've found solution to restore IMEI and SKU ,CID of this dead phone after one week
After many attempts my phone works ok without that error on screen about sku ,cid and without null imei now
For those with bricked htc d310w if help needed just pm and i will reply asap
Click to expand...
Click to collapse

Info
It is simple first write a fresh copy of stock rom 1.00.1136.5
Do not enter any google account but conect to wifi and update to 1.00.1136.7
Enable developer option then root with "rootdashi-cnet-k9zLZE.apk"
Open MTKdroidTools 2.5.3 and press root ; you must see on left down window of mtktools green and all aps like SU , Mobileuncle and RootExplorer installed in your phone
Disconnect baterry
Open SN_STATION v2.1344.02
When u start to write imei (after bouth imei inserted) push volume down to connect the preloder of phone when u see first 'ok ' meta is loaded then connect battery to reach Kernel stage push power and wait to see writing your phone should see phone boot only android image and restarting
Now if all good it will boot in android ,still that error will be on screen but when do *#06# u will have both imei on screen
Now type on pad #243# and u must see Swich Career ID ;chose what your career must be select 1.Quick Pick ; 2.Set ; 3.Backup to NVRam
Now phone is restarting and after reebot that error is gone and your phone have to work
i will send u an pm with app and some photos for help couse as new user i can't post direct links to my storage
Once u get #243# work it will work every time

Dear victormm,
Thank you very much as i solved problem with sku,cid and imei on htc by proper following steps and using tools which you sent me. I thank you so much currently i have just to say thank you very much and wish you happy xmas & new year.
Regards,
Godson.

Simple just press vol down and connect to pc
With maui meta tool its very easy no need to root
Easy and time saving

victormm.uk said:
It is simple first write a fresh copy of stock rom 1.00.1136.5
Do not enter any google account but conect to wifi and update to 1.00.1136.7
Enable developer option then root with "rootdashi-cnet-k9zLZE.apk"
Open MTKdroidTools 2.5.3 and press root ; you must see on left down window of mtktools green and all aps like SU , Mobileuncle and RootExplorer installed in your phone
Disconnect baterry
Open SN_STATION v2.1344.02
When u start to write imei (after bouth imei inserted) push volume down to connect the preloder of phone when u see first 'ok ' meta is loaded then connect battery to reach Kernel stage push power and wait to see writing your phone should see phone boot only android image and restarting
Now if all good it will boot in android ,still that error will be on screen but when do *#06# u will have both imei on screen
Now type on pad #243# and u must see Swich Career ID ;chose what your career must be select 1.Quick Pick ; 2.Set ; 3.Backup to NVRam
Now phone is restarting and after reebot that error is gone and your phone have to work
i will send u an pm with app and some photos for help couse as new user i can't post direct links to my storage
Once u get #243# work it will work every time
Click to expand...
Click to collapse
Senior Member477 posts Thanks: 16
HTC Desire 310 Single SIM Invalid IMEI cause CID is Incorrect
Dear brother based on this thread, i have similar problem which happened after factory reset on htc desire 310 single sim. the phone cant detect any network and the single sim slots reads null invalid imei also is prompting for SKU, CID. Please help me brother...