I wrote in a few days ago regarding my phone not being able to detect the SIM card.
From further studies, I found that the issue is likely my baseband. Here's my Tablet's info:
Model Number: GT-P6200
Android versoin: 4.0.4
Baseband version: Unknown
Kernel Version: 3.0.15-P6200XXLQ1-CL776352
[email protected] # 3
SMP PREEMPT Mon Jun 25 14:42:23
KST 2012
Build Number: IMM76D.XXLQ1
I am not sure if that's normal but I gather baseband unknown is not good. I'm trying to go for a fix and maybe reflash my modem file.
However I have two other complications:
* My broadband is down, I'm typing from a USB Dongle
* My tablet can't be detected by Windows. The issue started sametime the Sim coulnd't be found, I tried connecting the tablet to 3 different PCs and it couldn't be detected at all -- I can't even install USB drivers as the PC doesnt even recognize the phone. So I can't update via USB.
I can still connect via WiFi, might go to a place with WiFi and try "Software Update" to see if I can get a software update via the air.
But it seems my only other option is to flash via MicroSD in recovery mode.
Can I fix the baseband by flashing from MicroSD in recovery mode?
I think I screwed up, I flashed using Mobile Odin the 4.0.4 firmware found in one of the threads here for Hong Kong (can't find it anymore). The ICS here flashed my device to a P6200L --> And now Mobile Odin won't work with it! The baseband is still broken. So looks like I lost the ability to flash my device altogether now. I'll try KIES and hope I can do something in KIES, because the new firmware didn't fix the problem.
My current device:
Model Number: GT-P6200L
Android versoin: 4.0.4
Baseband version: Unknown
Kernel Version: 3.0.15-P6200LVJLP5-CL979354
[email protected] # 3
SMP PREEMPT Wed Aug 1 00:14:58
KST 2012
Build Number: IMM76D.VJLP5
Something went wrong when flashed a beta 4.3 ROM and my phone soft-bricked. Was finally able to get it back up and running using the Droid Razr HD Utility 1.21. Flashed the stock ROM but it would hang in set up with the "This could take several minutes" message. However, I was able to load my TWRP backup files and have been able to restore both stock and the 4.2.2 ROM I was using when all this began. However, my baseband has NOT been restored with any restore or stock ROM I've tried. So I have no service and no data connectivity at all.
Here is my phone info:
Model number: Droid RAZR MAXX HD
Android version: 4.2.2
Baseband version: Unknown
Kernel version: 3.0.88-g7f33d31/[email protected] #1/Mon Aug 5 12:42:10 EDT 2013
CPU: ARMv7 Processor rev 4 (v71)
Memory: 808 MB
Slim version: Slim-4.2.2.build.8-OFFICIAL
Build number: slim_xt926usedebug 4.2.2 JDQ39E/eng.darkspadez.20130805.123130 test-keys
Under Status
Network: Unknown
Mobile network type: Unknown
Service State: Out of service
Roaming: Not roaming
Mobile network state: Disconnected
My phone number: Unknown
MIN: Unknown
PRL version: Unknown
MEID: Unknown
IMEI: Unknown
ICCID: Unknown
Anyone have any idea how I can get my baseband back??
Many thanks for any help.
Tried a custom now I can't get a signal on my previous rom. no baseband no imei
I'm facing same issues on my xt926 pls help.
I have tried everything I can to fix this 'NO SIM' problem with No Luck whatso. I have gone back to stock firmware update 4.3 via Kies. done full reset, tried different working sim cards, its getting signal but no network carrier.
This was after flashing 2 ROMs & Gapps - Resurrection-Remix-LP-v5.4.8-20150619-i9305 & AOSP-5.1.1-20150622-i9305-rodman01.
The ROMs both worked fine so does the stock ROM, but still NO SIM. I have also flashed the following modems
Modem-I9305T-DVUENC1, Modem-I9305T-DVUEML1, Modem-I9305T-DVUEMK2, and even some older ones.
Model Number: GT-I9305T (Telstra Australia)
Android Version: 4.3
Baseband Version: I9305TDVUEMK2
(It was I9305TDVUENC1, but I flashed
the DVUEMK2 Modem, which didn't work)
Kernal Version: 3.0.31-2051278
[email protected] #1
Wed Mar 19 13:01:08 KST 2014
Build Number: JSS15J.I9350TDVUENC1
Network: Unknown
Signal Strength: 81dBm 20asu
Mobile Network Type: Unknown
Service State: Out of Service
Roaming: Not Roaming
Mobile Network State: Disconnected
My Phone Number: Unknown
IMEI: 3539XXXXXXXXXXXX
IMEISV: 03
IP Address: 192.XXX.XX.XX
Thanks in advance if anyone can help :good:
Hi there,
I believe you'd need a stock firmware flashed in order to boot.
Please post in Australian Galaxy S3 Thread so that one of the experts may be of help.
Good luck
Ahh I see the light... flash stock firmware, not a firmware upgrade and installation from kies,
I wasn't aware of the Aussie thread either so double kudos to you R_a_z_v_a_n
Cheers :good:
Short Story:
Everything used to work with Superman ROM, then I installed Phoenix ROM and now I can not find my Mobile Providor anymore in Mobile Networks (but I can see a different providor) and the phone thinks it is a SM-G930FD. (I might have wiped too much information during installation process of Phoenix ROM) I tried flashing stock using Smart Switch, which ends up in DRK errors + dm-verify errors. After flashing TWRP + SuperSU the phone boots but still the same problems. I flashed BL+AP+CP+CSC from stock SAMMobile but still same problems as flashing using Smart Switch. Also tried BL+AP+CP+HOME_CSC and same problems. Also tried removing cache.img from the CSC and HOME_CSC tars and still no luck. I also tried flashing Superman ROM again but no luck. Also flashing stock again using Smart Switch, then TWRP + SuperSU and tried flashing CSC, HOME_CSC, CSC (no cache) and HOME_CSC (no cache) but still same problems each time. I put the details from "Phone INFO *Samsung*" below.
What else can I do to get my phone to connect to my mobile operator again?
Long Story:
After installing Phoenix ROM (after having some stability issues on Superman ROM) on my S7 SM-G930F I have a problem with connecting to my mobile providor. I believe I have this problem since I followed this guide http://forum.xda-developers.com/showpost.php?p=68979765&postcount=251 and flashed BL+CP (I might have even accidentally flashed for the SM-G935F instead of SM-G930F).
To fix this issue I tried flashing/formatting a lot of things but no luck, so I decided to go back to stock firmware.
I have a TANGO SIM card from Luxembourg that can connect to 3G/4G/LTE and it works fine when I try it on my old Galaxy S4, now I am trying to get it to work on my Galaxy S7.
Smart Switch
Upon plugging my S7 in my computer while Smart Switch is open, it gives the error: "Device not recognised". I managed to get around that by clicking on Emergency software recovery and initialization, then clicking on Device initialization, then giving "SM-G930F" in capitals as Model name, then giving my IMEI code and then Smart Switch succesfully downloads and flashes factory firmware to my S7. However upon booting the S7 I get the error "Device does not have DRK, please install DRK first. press any button".
I have also tried to Wipe cache partition & Wipe data/factory reset after getting the DRK error, but the phone won't boot and it displays dm-verify errors.
When I put the S7 in Download mode it says:
Product name: SM-G930F
Current binary: Samsung Official
System status: Custom
FRP Lock: Off
Warranty void: 1
Custom recovery
So the next thing I do is using a custom recovery TWRP: I succesfully flash TWRP (twrp-3.0.2-4-herolte.img.tar see http://forum.xda-developers.com/galaxy-s7/development/recovery-official-twrp-herolte-t3333770) to the S7.
When I put the S7 in Download mode it says:
Product name: SM-G930F
Current binary: Custom
System status: Custom
FRP Lock: Off
Warranty void: 1
The phone still does not boot, next up I flash SuperSU (SuperSU-v2.78-201609011115.zip see http://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703) inside TWRP. I then click Wipe cache/dalvik and then Reboot System.
Now the phone boots! However after entering my PIN code it displays the Dual SIM card menu (which is weird because this is not a SM-G930FD) with the following SIM 1 details:
SIM 1
TANGO 3G/2G
Unknown
The providor is correct but it is weird that it thinks it can only go up to 3G because I have LTE support.
Now I finish up the initial setup of Android and then I still can not send text messages or connect to 3G/4G. When I click on Mobile networks > Access Point Names, I see Tango Internet as an unchecked option, it still does not work after checking it on, the details of the access point are the following:
Name: Tango Internet
APN: Internet
Proxy: Not set
Port: Not set
Username: tango
Password: *****
Server: not set
MMSC: http://mms.tango.lu
MMS proxy: 212.66.75.3
MMS port: 8080
MCC: 270
MNC: 77
Authentication type: None
APN type: default,mms,supl
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
Mobile virtual network operator type: None
When I click Settings > Mobile networks > Network operators > Search networks, I only see "L Orange-LU" popping up, which is a different providor then Tango.
Also some more information: in settings > About device > Model number : SM-G930FD (which is incorrect). In settings > About device > Software info :
Android version: 6.0.1
Baseband version: G930FXXU1BPJG (this seems to be correct when looking at the official versions of SAMMobile: http://www.sammobile.com/firmwares/database/SM-G930F/LUX/)
Kernel version: 3.18.14-9519568
[email protected] #1
Tue Oct 25 11:39:18 KST 2016
Build number: MMB29K.G930FXXU1BPJG
SE for Android status: Enforcing
SEPF_SECMOBILE_6.0.1_0031
Tue Oct 25 12:15:56 2016
Security software version: MDF v2.0 Release 7
VPN v1.4 Release 6.1
ASKS v1.2_161011
KNOX version: KNOX 2.6
...
Android security patch: 1 November 2016
Even more info from the app "Phone INFO *Samsung*":
GENERAL
Manufacturer/Brand: samsung
Phone Model: SM-G930F
Device Type: herolte
Product Name: heroltexx
Country of Origin: (blank)
Manufacturing Date: (blank)
Knox Warranty Void: Ox1
Colour / Internal Storage: 32 GB
CSC CODE
Product Code: (blank)
Original CSC Code: LUX
Firmware's CSC Code: LUX
Active CSC Code: LUX
Available CSC Codes: (blank)
CSC Country: Luxembourg / LU
Mobile Operator: 27099 / 27077
FIRMWARE
Bootloader Version: G930FXXU1BPJG
PDA Version: G930FXXU1BPJG
CSC Version: G930FLUX1BPH1
Baseband Version: G930FXXU1BPJG
Latest Firmware: Yes
Kernel Version: 3.18.14-9519568
[email protected] #1
64-bit
Java Virtual Machine: ART 2.1.0
ANDROID
Root Existence: Yes
Android Version: 6.0.1
Build Number: MMB29K.G930FXXU1BPJG
Build Fingerprint: samsung/heroltexx/herolte:6.0.1/MMB29K/G930FXXU1BPJG:user/release-keys
Build Description: heroltexx-user 6.0.1 MMB29K G930FXXU1BPJG release-keys
Build Date: Tue Oct 25 11:48:05 KST 2016
Changelist: 9519568
HARDWARE
Hardware / Board: samsungexynos8890 / universal8890 [64-bit]
Platform / Chip: exynos5 / exynos8890
GPU (Graphical Processing Unit): ARM Mali-T880
Modem Board: SHANNON335
Hardware Revision: (blank)
Total RAM: 3.48 GB
PERSONAL
IMEI: 000000000000000
Android Serial Number: 9885b63... (i don't want to fully type this)
Samsung Serial Number: 00000000000
Headset Connect Counter: 0
Charger Connect Counter: 12
Upon clicking Refurbishment Check, I get "It looks like your phone is NOT a genuine one." with warnings no Manufacturing Date and no Hardware Revision, and also that Know Warranty Void has been tripped. I believe that I accidentally wiped this information in TWRP at some point :/
SAMMobile stock firmware
I also tried to manually flash the stock firmware through ODIN from SAMMobile: http://www.sammobile.com/firmwares/database/SM-G930F/LUX/. I tried flashing BL+AP+CP+CSC , BL+AP+CP+HOME_CSC , AP. I also tried flashing with the Re-Partition option and also with the Phone EFS Clear option. I also followed this guide http://forum.xda-developers.com/note5/help/how-to-solve-dm-verity-verification-t3293306 and flashed BL+AP+CP+CSC with CSC being a custom compiled md5 tar without cache.img , and the same for HOME_CSC.
Custom ROMs
I also tried installing custom ROMs but still no connectivity. I only tried Superman ROM and Phoenix ROM again.
Smart Switch + SAMMobile CSC/HOME_CSC
Finally I tried flashing stock firmware again using Smart Switch, and flashing TWRP and SuperSU again so it boots. Then I flashed CSC from SAMMobile and it did not make any difference. I also tried HOME_CSC, CSC (custom compiled without cache.img) and HOME_CSC (custom compiled without cache.img), but the phone still thinks it is a SM-G930FD and I can not connect to my Mobile Providor. Furthermore the details in the app "Phone INFO *Samsung*" do not change when I flash a CSC.
I can not find any other methods to fix this problem... I hope I'm not duplicating any other thread.
What else can I do to get my phone to connect to my mobile operator again?
same here
kiljon said:
Short Story:
Everything used to work with Superman ROM, then I installed Phoenix ROM and now I can not find my Mobile Providor anymore in Mobile Networks (but I can see a different providor) and the phone thinks it is a SM-G930FD. (I might have wiped too much information during installation process of Phoenix ROM) I tried flashing stock using Smart Switch, which ends up in DRK errors + dm-verify errors. After flashing TWRP + SuperSU the phone boots but still the same problems. I flashed BL+AP+CP+CSC from stock SAMMobile but still same problems as flashing using Smart Switch. Also tried BL+AP+CP+HOME_CSC and same problems. Also tried removing cache.img from the CSC and HOME_CSC tars and still no luck. I also tried flashing Superman ROM again but no luck. Also flashing stock again using Smart Switch, then TWRP + SuperSU and tried flashing CSC, HOME_CSC, CSC (no cache) and HOME_CSC (no cache) but still same problems each time. I put the details from "Phone INFO *Samsung*" below.
What else can I do to get my phone to connect to my mobile operator again?
Long Story:
After installing Phoenix ROM (after having some stability issues on Superman ROM) on my S7 SM-G930F I have a problem with connecting to my mobile providor. I believe I have this problem since I followed this guide http://forum.xda-developers.com/showpost.php?p=68979765&postcount=251 and flashed BL+CP (I might have even accidentally flashed for the SM-G935F instead of SM-G930F).
To fix this issue I tried flashing/formatting a lot of things but no luck, so I decided to go back to stock firmware.
I have a TANGO SIM card from Luxembourg that can connect to 3G/4G/LTE and it works fine when I try it on my old Galaxy S4, now I am trying to get it to work on my Galaxy S7.
Smart Switch
Upon plugging my S7 in my computer while Smart Switch is open, it gives the error: "Device not recognised". I managed to get around that by clicking on Emergency software recovery and initialization, then clicking on Device initialization, then giving "SM-G930F" in capitals as Model name, then giving my IMEI code and then Smart Switch succesfully downloads and flashes factory firmware to my S7. However upon booting the S7 I get the error "Device does not have DRK, please install DRK first. press any button".
I have also tried to Wipe cache partition & Wipe data/factory reset after getting the DRK error, but the phone won't boot and it displays dm-verify errors.
When I put the S7 in Download mode it says:
Product name: SM-G930F
Current binary: Samsung Official
System status: Custom
FRP Lock: Off
Warranty void: 1
Custom recovery
So the next thing I do is using a custom recovery TWRP: I succesfully flash TWRP (twrp-3.0.2-4-herolte.img.tar see http://forum.xda-developers.com/galaxy-s7/development/recovery-official-twrp-herolte-t3333770) to the S7.
When I put the S7 in Download mode it says:
Product name: SM-G930F
Current binary: Custom
System status: Custom
FRP Lock: Off
Warranty void: 1
The phone still does not boot, next up I flash SuperSU (SuperSU-v2.78-201609011115.zip see http://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703) inside TWRP. I then click Wipe cache/dalvik and then Reboot System.
Now the phone boots! However after entering my PIN code it displays the Dual SIM card menu (which is weird because this is not a SM-G930FD) with the following SIM 1 details:
SIM 1
TANGO 3G/2G
Unknown
The providor is correct but it is weird that it thinks it can only go up to 3G because I have LTE support.
Now I finish up the initial setup of Android and then I still can not send text messages or connect to 3G/4G. When I click on Mobile networks > Access Point Names, I see Tango Internet as an unchecked option, it still does not work after checking it on, the details of the access point are the following:
Name: Tango Internet
APN: Internet
Proxy: Not set
Port: Not set
Username: tango
Password: *****
Server: not set
MMSC: http://mms.tango.lu
MMS proxy: 212.66.75.3
MMS port: 8080
MCC: 270
MNC: 77
Authentication type: None
APN type: default,mms,supl
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
Mobile virtual network operator type: None
When I click Settings > Mobile networks > Network operators > Search networks, I only see "L Orange-LU" popping up, which is a different providor then Tango.
Also some more information: in settings > About device > Model number : SM-G930FD (which is incorrect). In settings > About device > Software info :
Android version: 6.0.1
Baseband version: G930FXXU1BPJG (this seems to be correct when looking at the official versions of SAMMobile: http://www.sammobile.com/firmwares/database/SM-G930F/LUX/)
Kernel version: 3.18.14-9519568
[email protected] #1
Tue Oct 25 11:39:18 KST 2016
Build number: MMB29K.G930FXXU1BPJG
SE for Android status: Enforcing
SEPF_SECMOBILE_6.0.1_0031
Tue Oct 25 12:15:56 2016
Security software version: MDF v2.0 Release 7
VPN v1.4 Release 6.1
ASKS v1.2_161011
KNOX version: KNOX 2.6
...
Android security patch: 1 November 2016
Even more info from the app "Phone INFO *Samsung*":
GENERAL
Manufacturer/Brand: samsung
Phone Model: SM-G930F
Device Type: herolte
Product Name: heroltexx
Country of Origin: (blank)
Manufacturing Date: (blank)
Knox Warranty Void: Ox1
Colour / Internal Storage: 32 GB
CSC CODE
Product Code: (blank)
Original CSC Code: LUX
Firmware's CSC Code: LUX
Active CSC Code: LUX
Available CSC Codes: (blank)
CSC Country: Luxembourg / LU
Mobile Operator: 27099 / 27077
FIRMWARE
Bootloader Version: G930FXXU1BPJG
PDA Version: G930FXXU1BPJG
CSC Version: G930FLUX1BPH1
Baseband Version: G930FXXU1BPJG
Latest Firmware: Yes
Kernel Version: 3.18.14-9519568
[email protected] #1
64-bit
Java Virtual Machine: ART 2.1.0
ANDROID
Root Existence: Yes
Android Version: 6.0.1
Build Number: MMB29K.G930FXXU1BPJG
Build Fingerprint: samsung/heroltexx/herolte:6.0.1/MMB29K/G930FXXU1BPJG:user/release-keys
Build Description: heroltexx-user 6.0.1 MMB29K G930FXXU1BPJG release-keys
Build Date: Tue Oct 25 11:48:05 KST 2016
Changelist: 9519568
HARDWARE
Hardware / Board: samsungexynos8890 / universal8890 [64-bit]
Platform / Chip: exynos5 / exynos8890
GPU (Graphical Processing Unit): ARM Mali-T880
Modem Board: SHANNON335
Hardware Revision: (blank)
Total RAM: 3.48 GB
PERSONAL
IMEI: 000000000000000
Android Serial Number: 9885b63... (i don't want to fully type this)
Samsung Serial Number: 00000000000
Headset Connect Counter: 0
Charger Connect Counter: 12
Upon clicking Refurbishment Check, I get "It looks like your phone is NOT a genuine one." with warnings no Manufacturing Date and no Hardware Revision, and also that Know Warranty Void has been tripped. I believe that I accidentally wiped this information in TWRP at some point :/
SAMMobile stock firmware
I also tried to manually flash the stock firmware through ODIN from SAMMobile: http://www.sammobile.com/firmwares/database/SM-G930F/LUX/. I tried flashing BL+AP+CP+CSC , BL+AP+CP+HOME_CSC , AP. I also tried flashing with the Re-Partition option and also with the Phone EFS Clear option. I also followed this guide http://forum.xda-developers.com/note5/help/how-to-solve-dm-verity-verification-t3293306 and flashed BL+AP+CP+CSC with CSC being a custom compiled md5 tar without cache.img , and the same for HOME_CSC.
Custom ROMs
I also tried installing custom ROMs but still no connectivity. I only tried Superman ROM and Phoenix ROM again.
Smart Switch + SAMMobile CSC/HOME_CSC
Finally I tried flashing stock firmware again using Smart Switch, and flashing TWRP and SuperSU again so it boots. Then I flashed CSC from SAMMobile and it did not make any difference. I also tried HOME_CSC, CSC (custom compiled without cache.img) and HOME_CSC (custom compiled without cache.img), but the phone still thinks it is a SM-G930FD and I can not connect to my Mobile Providor. Furthermore the details in the app "Phone INFO *Samsung*" do not change when I flash a CSC.
I can not find any other methods to fix this problem... I hope I'm not duplicating any other thread.
What else can I do to get my phone to connect to my mobile operator again?
Click to expand...
Click to collapse
i hope to help, i did a total wipe , cache and data ,and then reinstalled stock rom from sam mobile and everything turned to normal , mobile data is ok now!
popetillox said:
i hope to help, i did a total wipe , cache and data ,and then reinstalled stock rom from sam mobile and everything turned to normal , mobile data is ok now!
Click to expand...
Click to collapse
Thank you for replying! Oh, I'm glad I'm not alone. So I go into TWRP, go to Wipe, then check the following:
Dalvik / ART Cache: checked
System: unchecked
Data: checked
Internal Storage: unchecked
Cache: checked
Micro SDCard: unchecked
USB OTG: unchecked
Then I'll flash BL+AP+CP+CSC from SAMMobile. I'll post the results in a few minutes.
popetillox said:
i hope to help, i did a total wipe , cache and data ,and then reinstalled stock rom from sam mobile and everything turned to normal , mobile data is ok now!
Click to expand...
Click to collapse
Hmmm, it didn't work, I get DRK error and dm-verify upon flashing BL+AP+CP+CSC.
Now I flashed TWRP again, and wiped the following:
Dalvik / ART Cache: checked
System: checked
Data: checked
Internal Storage: checked
Cache: checked
Micro SDCard: checked
USB OTG: unchecked
Then flashed BL+AP+CP+CSC again. Still DRK error, then I hit "Wipe data/factory reset", and also hit "Wipe cache directory" and rebooted, but then it still gives dm-verify error.
Then flashed TWRP again, mounted the sd card and put SuperSU-v2.78-201609011115.zip on it. Then I flashed the SuperSU, then hit "Wipe cached/dalvik" and Reboot System. As expected it boots again but still no connection to my Mobile Providor and it still thinks it is a SM-G930FD.
I guess I must be wiping in the wrong way? How do you perform a "total wipe"?
Now I will wipe everything again through TWRP and flash stock through Smart Switch again, and see if that makes any changes.
PS: when I'm flashing BL+AP+CP+CSC in Odin I only have the following options checked (maybe I also need to check Re-Partition or something?):
Auto Reboot: checked
Re-Partition: unchecked
F. Reset Time: checked
DeviceInfo: disabled
Nand Erase All: unchecked
Flash Lock: unchecked
T Flash: unchecked
Phone EFS Clear: unchecked
Phone Bootloader Update: unchecked
popetillox said:
i hope to help, i did a total wipe , cache and data ,and then reinstalled stock rom from sam mobile and everything turned to normal , mobile data is ok now!
Click to expand...
Click to collapse
Even wiping as much as possible through TWRP and then performing an emergency recovery through Smart Switch still gives the DRK and dm-verify errors. I flashed TWRP and SuperSU again and now it still thinks it is a SM-G930FD and it still does not connect to my Mobile Providor...
I wish I was as lucky as you were. Or maybe my "total wipe" method is wrong?
Unroot
kiljon said:
Even wiping as much as possible through TWRP and then performing an emergency recovery through Smart Switch still gives the DRK and dm-verify errors. I flashed TWRP and SuperSU again and now it still thinks it is a SM-G930FD and it still does not connect to my Mobile Providor...
I wish I was as lucky as you were. Or maybe my "total wipe" method is wrong?
Click to expand...
Click to collapse
(sorry for my english) I forgot a couple of things, first of all, I did unroot the Phone, (so there was no TWRP nor Superuser etc, then i installed stock 6.01. rom and then i took the S7 to a shop and they unloked the phone (they are friends at the shop) , the told me that it was modems fault due a bad installation of the beta rom (the name that appeared was a different one, just like yours, but after days of "going crazy" the S7 is working like charm, and i will never root again.
---------- Post added at 11:27 PM ---------- Previous post was at 11:23 PM ----------
when i say "total wipe" i tray to say wipe from stock recovery, sorry for my english !! ?
hello exactly ditto issue here please do share the fix.
In the end I tried some more resetting without any luck and then left it lying around. Note that it was left in quite cold conditions.
After a few weeks I wanted to get it working again but it seemed the battery was dead. I let it on the charger overnight. The next day the battery still seemed dead. A few days on the charger later it still didn't show anything after trying to boot it.
I showed it to my dealer that it didn't boot and they took it for repair. A few days (or weeks) later they claimed that the motherboard was dead, they replaced it and I could come to pick it up. When I booted the phobe it had stock software and I could connect to my mobile providor successfully! I have been stock ever since. Samsung have also updated the software to Android 7.0 so that's good. I have also found solutions for the problems I had with being non-rooted. Maybe in the far future I will root again.
Platform: Samsung Android
Selected port: COM6
Selected model: SM-G930F
Reading info, please wait...
Detected phone model: SM-G930F
Firmware compiled date: Mon Jan 15 17:03:31 KST 2018
PDA version: G930FXXS2DRA9
CSC version: G930FXEF1DQJ1
SW version: G930FXXU2DRA9
Phone SN: R58H61FZEFE
Android version: 7.0 (NRD90M)
Sales code: XEF
Country: France
HW platform: exynos5
HW Chip: exynos8890
HW Modem: SHANNON335
Security patch level: 2018-01-01
SIM 1 status: ready
Codename: heroltexx
I tried everything flash COMBINATION_FA60_G930FXXU2ARA2 and network repair and write cert but when i flash the original stock firmware the network remains nothing
I can't do network repair and write cert on version 7 and i can't downgrade to version 6 cause bootloader !!!!
Has the phone's imei been blacklisted in some way?
I checked it and it’s not
Seems you cant flash an older firmware. Grab the very latest firmware (even if its not your csc) and flash that.
I found this the hard way
instrumentaly said:
Platform: Samsung Android
Selected port: COM6
Selected model: SM-G930F
Reading info, please wait...
Detected phone model: SM-G930F
Firmware compiled date: Mon Jan 15 17:03:31 KST 2018
PDA version: G930FXXS2DRA9
CSC version: G930FXEF1DQJ1
SW version: G930FXXU2DRA9
Phone SN: R58H61FZEFE
Android version: 7.0 (NRD90M)
Sales code: XEF
Country: France
HW platform: exynos5
HW Chip: exynos8890
HW Modem: SHANNON335
Security patch level: 2018-01-01
SIM 1 status: ready
Codename: heroltexx
I tried everything flash COMBINATION_FA60_G930FXXU2ARA2 and network repair and write cert but when i flash the original stock firmware the network remains nothing
I can't do network repair and write cert on version 7 and i can't downgrade to version 6 cause bootloader !!!!
Click to expand...
Click to collapse
plz try flashing this firmware and write pB6.tar modem then patch certificate https://www.sammobile.com/firmwares/galaxy-s7/SM-G930F/ALE/download/G930FXXU1DQHD/207465/
sharufi said:
plz try flashing this firmware and patch certificate https://www.sammobile.com/firmwares/galaxy-s7/SM-G930F/ALE/download/G930FXXU1DQHD/207465/
Click to expand...
Click to collapse
lol check log b4 answer i'm using U2 and u sent me link for U1 rom how i can downgrade !!!!!
instrumentaly said:
lol check log b4 answer i'm using U2 and u sent me link for U1 rom how i can downgrade !!!!!
Click to expand...
Click to collapse
its new build, 2018-02-18, it should work
sharufi said:
plz try flashing this firmware and write pB6.tar modem then patch certificate https://www.sammobile.com/firmwares/galaxy-s7/SM-G930F/ALE/download/G930FXXU1DQHD/207465/
Click to expand...
Click to collapse
how can I patch the certificate? I have the same problem
Atoriki92 said:
how can I patch the certificate? I have the same problem
Click to expand...
Click to collapse
could you flash the rom having binary 2 installed ?
instrumentaly said:
Platform: Samsung Android
Selected port: COM6
Selected model: SM-G930F
Reading info, please wait...
Detected phone model: SM-G930F
Firmware compiled date: Mon Jan 15 17:03:31 KST 2018
PDA version: G930FXXS2DRA9
CSC version: G930FXEF1DQJ1
SW version: G930FXXU2DRA9
Phone SN: R58H61FZEFE
Android version: 7.0 (NRD90M)
Sales code: XEF
Country: France
HW platform: exynos5
HW Chip: exynos8890
HW Modem: SHANNON335
Security patch level: 2018-01-01
SIM 1 status: ready
Codename: heroltexx
I tried everything flash COMBINATION_FA60_G930FXXU2ARA2 and network repair and write cert but when i flash the original stock firmware the network remains nothing
I can't do network repair and write cert on version 7 and i can't downgrade to version 6 cause bootloader !!!!
Click to expand...
Click to collapse
Same problem for me with my G935F, have you found solution?
---------- Post added at 01:36 AM ---------- Previous post was at 01:34 AM ----------
Same problem for my, on G935F. Have you found solution to fix it?
instrumentaly said:
Platform: Samsung Android
Selected port: COM6
Selected model: SM-G930F
Reading info, please wait...
Detected phone model: SM-G930F
Firmware compiled date: Mon Jan 15 17:03:31 KST 2018
PDA version: G930FXXS2DRA9
CSC version: G930FXEF1DQJ1
SW version: G930FXXU2DRA9
Phone SN: R58H61FZEFE
Android version: 7.0 (NRD90M)
Sales code: XEF
Country: France
HW platform: exynos5
HW Chip: exynos8890
HW Modem: SHANNON335
Security patch level: 2018-01-01
SIM 1 status: ready
Codename: heroltexx
I tried everything flash COMBINATION_FA60_G930FXXU2ARA2 and network repair and write cert but when i flash the original stock firmware the network remains nothing
I can't do network repair and write cert on version 7 and i can't downgrade to version 6 cause bootloader !!!!
Click to expand...
Click to collapse
Based on the information i can see available to me your PDA, BL and CP version are all AP SWREV B:2 whereas your CSC is using AP SWREV B:1, you will not be able to connect to any network whilst your CSC is set to B1, you need to download a full firmware package that contains all AP SWREV B:2 if your in australia or uk the new 8.0 oreo firmware is out on sammobile its for the uk but the network functions on all australian carriers this should fix your issue also go to the dialer and enter *#0011# is thr screen blank or filled with information if blank you are experiencing a certificate error or imei issue if it displays text when entered change the modem to AP SWREV B:2 firmware please feel free to private message me if you still need some help.
also quick questoin the combination FA_60_G930FXXU2ARA2 rom you flashed to the device did it actually boot ? As i have a G930F with knox tripped and for some reason the exact same combination rom will not boot at all on my device i get nad passed and provisioned and the blue status light but will not go any further and once restarted i get a console error.
Thanks
Matthew
mofazar said:
Same problem for me with my G935F, have you found solution?
---------- Post added at 01:36 AM ---------- Previous post was at 01:34 AM ----------
Same problem for my, on G935F. Have you found solution to fix it?
Click to expand...
Click to collapse
Just flash with this version
Sammobile 7.0 INS
your baseband version also repaird
then root
Then repair imei on Z3x (only orignal)
And then patch certificate
thats it....
Sorry for my bad English...
Hers the log..
Operation: Patch Certificate
Selected model: SM-G930F
Software version: 32.4
Waiting ADB device... OK
Reading phone info...
Model: SM-G930F
Android version: 7.0
PDA version: G930FXXS2DRCG
CSC version: G930FODD2DRAG
Phone version: G930FXXU2DRAG
Product code: SM-G930FZSUINS
CSC country code: India
CSC sales code: INS
Phone SN: RZ8J90V9S9B
IMEI: 358688xxxxxxxx8
HW version: MP 0.700
RF cal date: 20170909
Chip name: EXYNOS8890
Modem board: SHANNON335
Security patch: 2018-03-01
Boot Warranty bit: 1
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Writing zTool... OK
Initialization zTool... OK
Rebooting phone... OK
Patching CERT check... done
Done with Samsung Tool PRO v.32.4