Database Info

[Completed] [Q] my Galaxy mega 6.3 is not recognized by computer

Hi.
I have a galaxy mega 6.3 and it's got stuck in "firmware upgrade encountered an issue" screen.
when I connect it to computer in order to flash a rom with odin , computer doesn't recognize it. even it's not shown in device manager and it seems like phone is not connected. I have already installed drivers and I also have kies on my PC. I'm totally confused because I have been searching for a solution but I haven't found any answer.
Also My phone doesn't get into download mode.
Can someone help me?:crying:

SimpleTool said:
You need to download the drivers for your device. It contains Fastboot and ADB for your device. Once it's installed, your computer should be able recognize the phone.
Click to expand...
Click to collapse
I have already installed the drivers.
I can't get into download mode. maybe that's the reason.
anything I do, it shows the screen " firmware encountered an issue"
no download mode and no samsung logo while turning the phone on.

Hi
Thanks for writing to us at XDA Assist. I think it's best to ask your question in the Galaxy Mega q&a section here:
Galaxy Mega Q&A, Help & Troubleshooting
Good luck!

Thread closed, thanks.

[Completed] Zopo ZP999 Bricked after Firmware Update, Flashtool Stuck Downloading System

hi,
i've (or had) a Zopo ZP999 with mt6595 Soc...after a firmware update my radio lost signal, then i tried to flash my device
despitly he got bricked, i explain
when i open the SP flashtool 5.13 (version certified for 6595), select scatter file and can download all sub-items, disconnect/reconnect phone, flash starts
- DA passed
- BL passed
- then start then system download...after 7% the download stop without error
i redo, now it stops after 33%, another time afetr 22%
i checked preloader is installed corectly
anyone an idea?

Zopodroid said:
hi,
i've (or had) a Zopo ZP999 with mt6595 Soc...after a firmware update my radio lost signal, then i tried to flash my device
despitly he got bricked, i explain
when i open the SP flashtool 5.13 (version certified for 6595), select scatter file and can download all sub-items, disconnect/reconnect phone, flash starts
- DA passed
- BL passed
- then start then system download...after 7% the download stop without error
i redo, now it stops after 33%, another time afetr 22%
i checked preloader is installed corectly
anyone an idea?
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
There is no forum specifically for the Zopo ZP999 but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help where members familiar with your device might be able to advise you. Since your device is not widely used, please be patient and give the experts plenty of time to respond.
Good Luck!

[solved]
hi,
found solution
I uninstall/reinstall vcom driver and changed usb cable...flash OK....phone alive again
can be closed

[Completed] Help Note 3 5.0 Bricked

Hello I am new here, and also a noob in rooting, I recently rooted my Note 3 N900T on 5.0 it was all working good but I didnt had a recovery so I decided to install Rom manager and installed a recovery and clicked boot into recovery after that I got a bootloop so I flashed a stock firmware from Odin and then it failed after that My device is showing "Firmware Upgrade encounter connect to Kies", but now when I connect to the PC is says Usb device not recognized, I tried uninstalling both Kies and usb drivers and reinstalling still no good,
Please Help!!
Thank You

osamashakeel1999 said:
Hello I am new here, and also a noob in rooting, I recently rooted my Note 3 N900T on 5.0 it was all working good but I didnt had a recovery so I decided to install Rom manager and installed a recovery and clicked boot into recovery after that I got a bootloop so I flashed a stock firmware from Odin and then it failed after that My device is showing "Firmware Upgrade encounter connect to Kies", but now when I connect to the PC is says Usb device not recognized, I tried uninstalling both Kies and usb drivers and reinstalling still no good,
Please Help!!
Thank You
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
Sorry to hear about your trouble but fortunately there is an XDA area dedicated to the T-Mobile Samsung Galaxy Note 3 N900T at http://forum.xda-developers.com/note-3-tmobile which would be a good starting place. I suggest you post your question with all relevant details in the friendly Q&A forum there at http://forum.xda-developers.com/note-3-tmobile/help where the experts familiar with your device will be best able to guide you.
Good luck!
EDIT: Member has now posted in the suggested area. Thread closed.

[Completed] Possibly hard-bricked LG lge-465f phone - download mode only

Hello!
I recently came upon a (quite old) LG phone, model LG lge-465f. It was suffering from Security Error loop. I charged the battery using an external charger, downloaded LG Mobile Support Tool, installed the drivers on my Windows 7 x64, connected the phone in Download Mode (couldn't get it in Emergency Mode for the life of me), the software recognised the phone, so I did the Software Update. It downloaded the firmware, extracted it, but got stuck at 5%, saying I needed to unplug and plug it back. Did it a few times, until the program crashed. Tried some more times, changed to a Windows XP x32 station, but to no avail.
So I downloaded a .kdz from a stock ROM site I trust and tried to use the LG Flash Tool 2014. No luck. Still got stuck at 5% and crashed. If I tried to click on Get Phone Information, the program crashed.
Then I tried KDZ_FW_UPD. Selected the phone mode to DIAG, selected my KDZ, but got ERROR PHONE NOT FOUND. I tried to change the COM port to COM41, did the flashing again, still stuck at the same error.
Problem is, the phone now seems to be even worse. I can't turn it on, only get it to download mode. Now I can't even see the Security Error... Is the phone totally gone?
Thanks for any help!

Hello and thank you for using XDA Assist,
please ask in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there will be able to help you.
Best regards & good luck
Trafalgar Square
XDA Assist

[Completed] Can't change firmware Lenovo Vibe Shot Z90-7

Hello everyone!
I accquired this phone froma chinese online shop (the third one) and i want to change the chinese rom to euro firmware.
The problem resides in that when i changed the rom following the instructions of this forum in the other 2 previous phones i got it was everything alright and worked correctly, but with this last one i can't even make miflash/qlifil recognise Qualcom Com port. Now i only get at miflash the phone recognised with this weird name: b65bc2d5 . I'm affraid to try flashing because i didn't see anyone who got that name on the program and i don't want to get a brick. Also i tried to change the rom by sdcard with fastboot using the same file i used to install the other 2 phone that worked but it still says that the phone is Z90-7 and it wont take the installation file ( it's the second file on boycracked stock official lenovo vibe shot rom page). The thing is that when you upgrade to eu rom the phone model changes to Z90a40 and takes that rom, but not this last one.
I installed all the drivers manually because the phone on vendor mode can't install them itself (vol up + power button and then plug to the pc).
The version of chinese rom is android 6.0.1.
I hope this info will make someone know the solution because i don't.
Thanks and regards.
P.D: Now i'm triying to plug and detect but can't even do miflash detects it.

Hello and thank you for using XDA Assist,
please post your question in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist