Related
Now, while updating my phone via KDZ it showed error:
Upgrade Error
WParam : 100
LParam: 1002.
I tried many variations (CDMA, 3GQCT / CS_emergency, emergency..) but nothing, the same error.
The phone is now in emergency mode, and i know, if i will try to disconnect phone from pc it will be bricked, what to do ???
I would be very happy if someone could help me
EDIT: Can moderators add SOLVED to this thread ?
ashirviskas said:
Now, while updating my phone via KDZ it showed error:
Upgrade Error
WParam : 100
LParam: 1002.
I tried many variations (CDMA, 3GQCT / CS_emergency, emergency..) but nothing, the same error.
The phone is now in emergency mode, and i know, if i will try to disconnect phone from pc it will be bricked, what to do ???
I would be very happy if someone could help me
Click to expand...
Click to collapse
ALSO, my system is windows 7. LGE Virtual Modem and LGE Android Platform USB Modem are disabled
try again this time with 3gqct with admin.
Sent from my LG-P500
also enable usb debugging. that step is important
Sent from my LG-P500
allenwalker1998 said:
try again this time with 3gqct with admin.
Sent from my LG-P500
Click to expand...
Click to collapse
I am using Run as admin. But thanks (And phone is in emergency now)
By the way i attached logs, the first on is the longest, others 7 are same like the second so i added only first and second
EDIT: First log is too big, so here it is: http://www.2shared.com/document/wgs6hsIH/KDZ_FW_UPD_log00.html
is it a korean p500? i suggest updating ur usb drivers
Sent from my LG-P500
allenwalker1998 said:
is it a korean p500? i suggest updating ur usb drivers
Sent from my LG-P500
Click to expand...
Click to collapse
No, it is normal LG-P500, drivers are installed.
ashirviskas said:
No, it is normal LG-P500, drivers are installed.
Click to expand...
Click to collapse
Now downloading V20C_00.kdz.
EDIT:
Nope, not working and this one
So, i left my phone overnight plugged to charger to do not exit emergency mode, ut now heres another problem. I reinstalled windows ( now i have xp) but it does not recognizes my phone, i tried many drivers, but still the phone is not showing in the devices. The only drivers i have are LGE modem, and LGE bluetooth TransPort. Any drivers or tutorials will be accepted, thanks
(And sorry for my english)
ashirviskas said:
So, i left my phone overnight plugged to charger to do not exit emergency mode, ut now heres another problem. I reinstalled windows ( now i have xp) but it does not recognizes my phone, i tried many drivers, but still the phone is not showing in the devices. The only drivers i have are LGE modem, and LGE bluetooth TransPort. Any drivers or tutorials will be accepted, thanks
(And sorry for my english)
Click to expand...
Click to collapse
its somewhere here in forum.. search for it..
probably try the fastboot thread..
shake ur fone and remove the battery then connect ur fone to pc without battery and then try kdz updater.. it will be sorted out
if first tym it didn't work then give it 2-3 tries it will work surely
Sent from my LG-P500 using xda premium
ccdreadcc said:
its somewhere here in forum.. search for it..
probably try the fastboot thread..
Click to expand...
Click to collapse
None of the drivers are workng...
if you are still in emergency mode, just go into kdz updater, and put the settings at 3GQCT and the State as emergency. then just launch software update. And btw if you wouldve stayed on windows 7 it wouldve been okay, ive used kdz updater about 7 times already and each time owrked.
For in depth guide, idk if you already read this but heres the link
http://forum.xda-developers.com/showthread.php?t=1060121
P500T1 said:
if you are still in emergency mode, just go into kdz updater, and put the settings at 3GQCT and the State as emergency. then just launch software update. And btw if you wouldve stayed on windows 7 it wouldve been okay, ive used kdz updater about 7 times already and each time owrked.
For in depth guide, idk if you already read this but heres the link
http://forum.xda-developers.com/showthread.php?t=1060121
Click to expand...
Click to collapse
Thanks to all, but nothing worked. Now my computer doesn't even recognize that i am connecting my phone. even device manager isn't refreshing when i m connecting my phone to pc... Same on another computer (Laptop, win7, 64-bit). will try to remove battery, hope this will not brick my phone
abhinav quietly brilliant said:
shake ur fone and remove the battery then connect ur fone to pc without battery and then try kdz updater.. it will be sorted out
if first tym it didn't work then give it 2-3 tries it will work surely
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Just removed battery. BRICKED. Well, i think i will have to do some pause at androids....
ashirviskas said:
Just removed battery. BRICKED. Well, i think i will have to do some pause at androids....
Click to expand...
Click to collapse
I will do nothing for you but to suggest you that never ever flash a gb rom via kdz (v20*) it will lead ur phone to brick.. always flash v10e rom via kdz rather then other one.........
By the way have you tried flashing v10* roms at that time in the emergency mode....
Press THANKS if I help you..!!
Sent from my [email protected] OpTiMu$ On€ [email protected]
yeah try flashing a froyo.. i have this type of brick once before n by removing battery, shaking fone and then using kdz worked for me
Sent from my LG-P500 using xda premium
ashirviskas said:
So, i left my phone overnight plugged to charger to do not exit emergency mode, ut now heres another problem. I reinstalled windows ( now i have xp) but it does not recognizes my phone, i tried many drivers, but still the phone is not showing in the devices. The only drivers i have are LGE modem, and LGE bluetooth TransPort. Any drivers or tutorials will be accepted, thanks
(And sorry for my english)
Click to expand...
Click to collapse
You had to DISABLE lge Modem, as that causes soft bricking , like you have now.
GO into my signatures link and look up how to flash kdz properly, with all the links attached, as well as how to get out of emergency mode. My guide should just be made sticky, as it has the compilation of all the kdz, emergency procedures, rooting guides into one, as ive lost count how many times I had to tell someone how to do the above things.
Go to emergency mode flash recovery using lgmdp and install any custom rom.this is better then kdz.
Sent from my LG-P500 using Tapatalk 2
vikasb32 said:
Go to emergency mode flash recovery using lgmdp and install any custom rom.this is better then kdz.
Sent from my LG-P500 using Tapatalk 2
Click to expand...
Click to collapse
you cant get into recovery when its in emergency mode, emergency mode = bootloader, which is before recovery.
Lgmdp is not better then KDZ, dont talk s***, just because its your opinion.
Id the OP is not sure, use google and research for him/herself, but kdz can be used to get out of emergency mode, I have a link to the thread in my sig, for that purpose, its very easy, but dont forget to plug ur phone into another USB port, or re-install your LG drivers and disable LGE modem, as that was most likely the original cause of your problem.
Hello,
i have a problem, i need to flash baseband ( http://forum.xda-developers.com/showthread.php?t=1149530 ) on my LG.
But LGMDP.exe doesn't shows my phone on Select port. But ONLY LGMDP.exe. I have usb debugging enabled.
So what can I do that it shows my phone, so I finally can flash baseband?
Hope you can help me fast.
Thanks.
Yours sincerely,
LegendZz
Have you installed LG Drivers
Sent from my GT-I9082 using xda premium
Yes, I have installed LG Drivers, PC Suite and so on, but dont work
Have you disabled lg modem from control panel>properties in your PC? After disabling, reboot PC & then connect phone.
Sent from my LG-P500
pmvyas said:
Have you disabled lg modem from control panel>properties in your PC? After disabling, reboot PC & then connect phone.
Sent from my LG-P500
Click to expand...
Click to collapse
Yes I have, but still don't work
Now I tried to install Gingerbread 2.3.3 official with KDZ Updater, but also this one says ' PHONE WAS NOT FOUND '
LegendZz said:
Yes I have, but still don't work
Now I tried to install Gingerbread 2.3.3 official with KDZ Updater, but also this one says ' PHONE WAS NOT FOUND '
Click to expand...
Click to collapse
for people, like me also, that LGMDP doesn't show device, you need to have installed LG drivers, disabled LG modem from device manager, reboot into recovery, conect phone to pc, go to advance/mounts and mount USB, that shoud make LGMDP show the device(maybe it will take some little time to detect it and instal drivers), from LGMDP select country and language, carrier, phone model and shoud see if there are updates for it and install them and after all is done reboot
AND DO NOT TRY TO UPDATE TROUGH KDZ BECAUSE ALOT OF PEOPLE HAD HARDBRICKED THEYR PHONES (USING KDZ IS NOT FOR EVERYBODY), ONLY USE LGMDP,
AN IF YOU EVENTUALY USED KDZ AND GAVE YOU ERROR, DO NOT PULL OUT BATTERY, JUST RETRY AGAIN UNTILL IS ALL DONE OK,
IF ALSO, YOU WILL NEED TO GET YOUR DEVICE TO THE REPAIR SHOP AND THAT IS NOT FOR FREE, OR IN THE WORST CASE YOU WILL NEED A NEW PHONE
My LG G2 D800 (AT&T) 32 GB is stuck in download mode and I cannot flash the stock ROM to it.
I can't get out of download mode no matter how I try to press keys at boot, etc. -- just a black screen with the LG logo.
adb devices returns no devices found.
Shows in Windows Device Manager as "LGE AndroidNet USB Serial Port (COM4)."
Flash Tool finds my device, but when I try to flash (using dll C:\Users\SAdra\Downloads\LGD800_20130904_LGFLASHv160.dll and S/W LGD800AT-01-V10O-310-410-OCT-19-2013+0.tot), it fails immediately and says "Model Information Check Fail!"
It shows "IMEI : " and "Model : ". That's really scary if that information has truly disappeared (not sure how that could have happened though). I at least have the IMEI on a sticker on the back.
I used ioroot to successfully enter root mode, so I should have an EFS backup, but I don't know how to recover it since I'm in download mode and the only tool I have to work with is the LG FlashTool, which isn't happy with me right now. I've tried key combinations but I can't seem to enter recovery mode or fastboot or anything from here.
Previously I was stuck in a fastboot loop but then I re-flashed most of the stock partitions from (downloads.codefi.re 10d_partitions directory under D800 Stock_Firmware) -- I remember doing this for aboot, boot, dbi, laf, modem, recovery, and abl1 -- I was following some dumb forum post in which someone recommended doing that -- duhh...
I would be happy at this point if I could get back into my fastboot loop -- at least I could flash stuff from there.
What got me into the fastboot loop in the first place was flashing the BeanStalk ROM (it was a two-part thing where you were supposed to first flash the main ROM and then flash a device-specific patch -- well, the initial ROM flash got me into the fastboot loop).
Any recommendations? If I were to use Linux, would I have any other options -- I've seen people mention flashing partitions using dd?
At this point I'm about ready to take it in to AT&T (still under warranty / in contract) and beg for help, although I know I've obviously voided my warranty by rooting it.
I've seen a few older threads where people are stuck in download mode and have the same "model information" error in FlashTool, and it seems nobody ever replies to those threads, so I think I'm out of luck. If anybody has gone through this or has any idea what I can do, I would really appreciate the help.
Thanks,
I have the same problem with my G2. I am stuck at the LG logo. No recovery and download mode stuck at the dots. Phone is recognized (while its showing the LG logo) on the control panel as LGE AndroidNet USB Serial port (41) and LGE AndroidNet USB modem. I have tried all tutorials (hard resets, linux etc) I found but nothing worked. Anyone with suggestions???
thanks
bassist82 said:
I have the same problem with my G2. I am stuck at the LG logo. No recovery and download mode stuck at the dots. Phone is recognized (while its showing the LG logo) on the control panel as LGE AndroidNet USB Serial port (41) and LGE AndroidNet USB modem. I have tried all tutorials (hard resets, linux etc) I found but nothing worked. Anyone with suggestions???
thanks
Click to expand...
Click to collapse
did you solved it? im in same situation
Any news? Thanks
bassist82 said:
I have the same problem with my G2. I am stuck at the LG logo. No recovery and download mode stuck at the dots. Phone is recognized (while its showing the LG logo) on the control panel as LGE AndroidNet USB Serial port (41) and LGE AndroidNet USB modem. I have tried all tutorials (hard resets, linux etc) I found but nothing worked. Anyone with suggestions???
thanks
Click to expand...
Click to collapse
did you found the solution ?? same problem
I'm in the same situation. Flashed the wrong rom and now stuck at lg logo. Lg flash tool keeps erroring out with mismatch model numbers. The universal file also errors out. Anyone have a way to save it? I even hex edited the files and ended up with mismatched bin number. I feel I'm so close. Lg flash tool just keeps getting confused. Is it a full brick and a lost cause?
Sent from my SM-G900T using Tapatalk
Anybody???
Sent from my SM-G900T using XDA Free mobile app
I had the same problem quite a while ago and found that the firmware i downloaded was not the right one, downloaded 20c and related dll and it worked search for it.
Sent from my LG-D800 using XDA Free mobile app
lingarajug said:
I had the same problem quite a while ago and found that the firmware i downloaded was not the right one, downloaded 20c and related dll and it worked search for it.
Sent from my LG-D800 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for the suggestion but it still didn't work. Here are pics for what's happening.
1.) It's an at&t g2.
2.) Here's the wrong ROM that was flashed. (Cloudy)
3.) This is the error I Gerry from lgflashtool. (Wrong model)
4.) If I use the alternate DLL in op post then this is the error. (Crossdll)
I just can't get it to unbrick. Any other suggestions I'm site would help a ton of other people. Thanks in advance!
Sent from my Samsung Galaxy S5 using XDA Free mobile app
In the 2nd pic it says f320l but in 3rd pic it says d801 T-Mobile and firmware version reads 20e, if it is an at&t phone there is only 20c tot and dll available now, so if u could go back to stock recovery and clean everything and then download 20c firmware and dll u should be good to go. If u still cant flash 20c firmware try 20d not 20o as it 20d is what my g2 came with first.
Sent from my LG-D800 using XDA Free mobile app
lingarajug said:
In the 2nd pic it says f320l but in 3rd pic it says d801 T-Mobile and firmware version reads 20e, if it is an at&t phone there is only 20c tot and dll available now, so if u could go back to stock recovery and clean everything and then download 20c firmware and dll u should be good to go. If u still cant flash 20c firmware try 20d not 20o as it 20d is what my g2 came with first.
Sent from my LG-D800 using XDA Free mobile app
Click to expand...
Click to collapse
That's what's weird. I am using the 20c tot. I have stock recovery. Return to factory does nothing. Still a brick. Anyone else have my problem and overcome it?
Sent from my SM-G900T using XDA Free mobile app
jayb222 said:
That's what's weird. I am using the 20c tot. I have stock recovery. Return to factory does nothing. Still a brick. Anyone else have my problem and overcome it?
Sent from my SM-G900T using XDA Free mobile app
Click to expand...
Click to collapse
Pm me I think I can help. Sorry I may be a month late
SamerAdra said:
My LG G2 D800 (AT&T) 32 GB is stuck in download mode and I cannot flash the stock ROM to it.
I can't get out of download mode no matter how I try to press keys at boot, etc. -- just a black screen with the LG logo.
adb devices returns no devices found.
Shows in Windows Device Manager as "LGE AndroidNet USB Serial Port (COM4)."
Flash Tool finds my device, but when I try to flash (using dll C:\Users\SAdra\Downloads\LGD800_20130904_LGFLASHv160.dll and S/W LGD800AT-01-V10O-310-410-OCT-19-2013+0.tot), it fails immediately and says "Model Information Check Fail!"
It shows "IMEI : " and "Model : ". That's really scary if that information has truly disappeared (not sure how that could have happened though). I at least have the IMEI on a sticker on the back.
I used ioroot to successfully enter root mode, so I should have an EFS backup, but I don't know how to recover it since I'm in download mode and the only tool I have to work with is the LG FlashTool, which isn't happy with me right now. I've tried key combinations but I can't seem to enter recovery mode or fastboot or anything from here.
Previously I was stuck in a fastboot loop but then I re-flashed most of the stock partitions from (downloads.codefi.re 10d_partitions directory under D800 Stock_Firmware) -- I remember doing this for aboot, boot, dbi, laf, modem, recovery, and abl1 -- I was following some dumb forum post in which someone recommended doing that -- duhh...
I would be happy at this point if I could get back into my fastboot loop -- at least I could flash stuff from there.
What got me into the fastboot loop in the first place was flashing the BeanStalk ROM (it was a two-part thing where you were supposed to first flash the main ROM and then flash a device-specific patch -- well, the initial ROM flash got me into the fastboot loop).
Any recommendations? If I were to use Linux, would I have any other options -- I've seen people mention flashing partitions using dd?
At this point I'm about ready to take it in to AT&T (still under warranty / in contract) and beg for help, although I know I've obviously voided my warranty by rooting it.
I've seen a few older threads where people are stuck in download mode and have the same "model information" error in FlashTool, and it seems nobody ever replies to those threads, so I think I'm out of luck. If anybody has gone through this or has any idea what I can do, I would really appreciate the help.
Thanks,
Click to expand...
Click to collapse
Hey,i had same issue but i solved it with srk tool 2.0 try it,it works for me don,t forget to hit thanks
Hi
I had the standard kitkat factory rom installed in my g3.I rooted the phone installed the twrp recovery, everything worked fine. Then I downloaded the stock lollipop rom for lg g3 d855 and flashed it through the TWRP recovery. During installation it formated the previous system. I rebooted the phone and from that moment it is not turning on. In removed the battery several times, tried to charge it , it shows no response. When I connect it with a computer then a com port is added in the device manager which shows phone is showing some response.
kindly help me regarding this issue.
Thank You
aeroexpert said:
Hi
I had the standard kitkat factory rom installed in my g3.I rooted the phone installed the twrp recovery, everything worked fine. Then I downloaded the stock lollipop rom for lg g3 d855 and flashed it through the TWRP recovery. During installation it formated the previous system. I rebooted the phone and from that moment it is not turning on. In removed the battery several times, tried to charge it , it shows no response. When I connect it with a computer then a com port is added in the device manager which shows phone is showing some response.
kindly help me regarding this issue.
Thank You
Click to expand...
Click to collapse
Did you do a full wipe before you flashed? Can you access TWRP? Can you access Download Mode? Please provide more info. Although I know nothing about unbricking devices, maybe someone with the right experience can help you, but you should give as much info and details as possible.
If you can still access in TWRP you can flash a custom ROM
Sent from my ALCATEL ONE TOUCH 6040D using XDA-Developers mobile app
joe2k01 said:
If you can still access in TWRP you can flash a custom ROM
Sent from my ALCATEL ONE TOUCH 6040D]
Click to expand...
Click to collapse
Well I did not wipe before installing new firmware through TWRP
Now phone is hard bricked,
It can't go to twrp, no recovery, no dowload or fastboot mode, Phone won't turn on and is recognized as LGE AndroidNet USB Serial Port in my laptop.
aeroexpert said:
Well I did not wipe before installing new firmware through TWRP
Now phone is hard bricked,
It can't go to twrp, no recovery, no dowload or fastboot mode, Phone won't turn on and is recognized as LGE AndroidNet USB Serial Port in my laptop.
Click to expand...
Click to collapse
Maybe you should try this: http://appsandtips.blogspot.co.il/2015/11/how-to-hard-unbricked-lg-g3-all-variants.html?m=1
This tutorial also seems nice: http://www.androidbrick.com/unbrick-recover-your-dead-lg-g3-g2-all-variants/
Good luck and hope you'll unbrick it successfully. Anyway you got nothing to lose I guess...
Sent from my LG G3 D855 running stock Lollipop v21a.
I have Opened my LG g3, did the steps as mentioned, now i am stuck in Borad Diag app which shows following error during test,
No response from the device, Check PMIC First and if still boot problem, replace AP ,
Do you know what should I do to fix it ?
Thank You
Sent from my ALE-L21 using XDA-Developers mobile app
aeroexpert said:
I have Opened my LG g3, did the steps as mentioned, now i am stuck in Borad Diag app which shows following error during test,
No response from the device, Check PMIC First and if still boot problem, replace AP ,
Do you know what should I do to fix it ?
Thank You
Sent from my ALE-L21 using XDA-Developers mobile app
Click to expand...
Click to collapse
As I said earlier, I have no experience with unbricking. However, what is your PC operating system (maybe windows 10 do problems?), do your device appear as qualcomm 9008 in the device manager?
Sent from my LG G3 D855 running stock Lollipop v21a.
Thank You, I am on WIN 10, that is not a problem , I shall see what I can do, May be I shall use LG Smart Boot Diagnostics Tool
Sent from my ALE-L21 using XDA-Developers mobile app
hi guys, want to share with you how i unbricked my t-mobile lg v10 . it's h901 on the sticker under battery while motherboard said f600l (korean version) i tried tungick sdcard method but didnt worked for me dont know why. then i found a video on youtube posted 3 days ago . using qfil & lg firmware extractor & lgup .phone should be on qualcomm 9008 mode. extracted f600l 20e into dz then extracted the dz file on a specified folder opened qfil select flat build . select the msm8992.mbn file then select the folder of extracted dz files f600l 20e select rawprogram.xml cancel the patch file. connect phone (in 9008 mode) press download (if it didnt choose the port automatically choose it yourself) .it will take a minute to download. then diconnect phone and reconnect it in download mode (press vol up while connecting cable to pc) it should enter download mode. then flash f600l 30e with lgup . and voila now i have my phone back to live with android 7.0 with no errors at all all thanks goes to aaya angush as he post the video & .mbn + .xml files thank you too much link to tutorial video: https://www.youtube.com/watch?v=JyY8jwdvCJI link to my phone booting after flash: https://youtu.be/Ut-psw_GELQ dont forget to install qualcomm drivers
all kdz here:
https://lg-firmwares.com/
another note: after some failed methods i brick the phone by flashing somefiles from h901 with files from f600l kdz's with qfil after that pc won't recognize phone at all. except an empty battery blinking icon if i connect phone without battery. then ifound this picture to short test point pins on the motherboard (take off battery. then connect the two pins with a small copper wire then connect usb cable to pc while still connecting pins .when you see qualcomm hs-usb 9008 on pc device manager release the wire then download correct files with qfil)
samy2015 said:
hi guys, want to share with you how i unbricked my t-mobile lg v10 . it's h901 on the sticker under battery while motherboard said f600l (korean version)
Click to expand...
Click to collapse
Thank you samy for pointing out the video. The problem I have is that I don't have network now. please help as my sim is not working, though I am on android 7.0 as well. my stickers also said h901, the phone was previously loading as T-Mobile and that is where LG bridge tried to update it to 20l and it got bricked to 9008.
any way now I have the phone on F600L30e as per the above method but I have this screenshot of the network status screen, my sim is not working, I got no network
JuGnO said:
Thank you samy for pointing out the video. The problem I have is that I don't have network now. please help as my sim is not working, though I am on android 7.0 as well. my stickers also said h901, the phone was previously loading as T-Mobile and that is where LG bridge tried to update it to 20l and it got bricked to 9008.
any way now I have the phone on F600L30e as per the above method but I have this screenshot of the network status screen, my sim is not working, I got no network
Click to expand...
Click to collapse
dont know why i didn't faced this . flash the f600l 30e again . may be it will be fixed or try another simcard from different provider .heres a pic of my network status
samy2015 said:
dont know why i didn't faced this . flash the f600l 30e again . may be it will be fixed or try another simcard from different provider .heres a pic of my network status
Click to expand...
Click to collapse
Can you please share the screenshot of your software page in about
JuGnO said:
Can you please share the screenshot of your software page in about
Click to expand...
Click to collapse
ok see here:
JuGnO said:
Thank you samy for pointing out the video. The problem I have is that I don't have network now. please help as my sim is not working, though I am on android 7.0 as well. my stickers also said h901, the phone was previously loading as T-Mobile and that is where LG bridge tried to update it to 20l and it got bricked to 9008.
any way now I have the phone on F600L30e as per the above method but I have this screenshot of the network status screen, my sim is not working, I got no network
Click to expand...
Click to collapse
do you tried to choose network manually ? is the phone detect the card ? did you change mode may be its 4g or 3g
samy2015 said:
do you tried to choose network manually ? is the phone detect the card ? did you change mode may be its 4g or 3g
Click to expand...
Click to collapse
I cant find the place where I can select the network manualy not the area where it shows 4g or 3g
The sim card was read since i have sim pin lock and have to enter it to open phone
---------- Post added at 07:06 AM ---------- Previous post was at 07:05 AM ----------
samy2015 said:
ok see here:
Click to expand...
Click to collapse
I have identical screenshot
JuGnO said:
I cant find the place where I can select the network manualy not the area where it shows 4g or 3g
The sim card was read since i have sim pin lock and have to enter it to open phone
---------- Post added at 07:06 AM ---------- Previous post was at 07:05 AM ----------
I have identical screenshot
Click to expand...
Click to collapse
then maybe its a only a setting problem
i cant find where to choose 3g or 4g in my phone
samy2015 said:
then maybe its a only a setting problem
i cant find where to choose 3g or 4g in my phone
Click to expand...
Click to collapse
Well i tried and checked with many softwares
All said rafio off
Although one went above and beyond and showed that my phine is infact connect to appropriate network but radio is turned off by system probably
Hereis the screenshot
JuGnO said:
Well i tried and checked with many softwares
All said rafio off
Although one went above and beyond and showed that my phine is infact connect to appropriate network but radio is turned off by system probably
Hereis the screenshot
Click to expand...
Click to collapse
well i can't help with that
samy2015 said:
another note: after some failed methods i brick the phone by flashing somefiles from h901 with files from f600l kdz's with qfil after that pc won't recognize phone at all. except an empty battery blinking icon if i connect phone without battery. then ifound this picture to short test point pins on the motherboard (take off battery. then connect the two pins with a small copper wire then connect usb cable to pc while still connecting pins .when you see qualcomm hs-usb 9008 on pc device manager release the wire then download correct files with qfil)
Click to expand...
Click to collapse
I've try this test point, there's nothing changes
ardian1899 said:
I've try this test point, there's nothing changes
Click to expand...
Click to collapse
you tried it then phone didnt enter qualcomm 9008 mode ?
you must stay short the pins till you connect cable to pc and after pc detect phone release the short wire
samy2015 said:
you tried it then phone didnt enter qualcomm 9008 mode ?
you must stay short the pins till you connect cable to pc and after pc detect phone release the short wire
Click to expand...
Click to collapse
Yes, I did that.. unfortunately nothings happen.
Do you think I may have better luck with the micro sd method?
ardian1899 said:
Yes, I did that.. unfortunately nothings happen.
Do you think I may have better luck with the micro sd method?
Click to expand...
Click to collapse
i don't know . is your phone showing any sign of life ?
samy2015 said:
i don't know . is your phone showing any sign of life ?
Click to expand...
Click to collapse
Yes..
If I connect the phone to the computer without battery, nothings appear
If I connect with battery, it's always enter download mode regardless I hold the up button or not (even if I hold the down button)
If I try to turn it on without connecting to the computer, the LG logo is flashing for a moment then enter download mode again.
On device manager, it's "LGE AndroidNet Serial USB".
LG bridge can't connect with the phone as well as QFIL (anymore).
Only visible on LGup and LG flashtool, been trying to flash using any KDZ and DZ (H901 and F600L) on both software, no luck. It's stopping between 4-36%..
I may try on another laptop in a few hours.
Any idea perhaps?
ardian1899 said:
Yes..
If I connect the phone to the computer without battery, nothings appear
If I connect with battery, it's always enter download mode regardless I hold the up button or not (even if I hold the down button)
If I try to turn it on without connecting to the computer, the LG logo is flashing for a moment then enter download mode again.
On device manager, it's "LGE AndroidNet Serial USB".
LG bridge can't connect with the phone as well as QFIL (anymore).
Only visible on LGup and LG flashtool, been trying to flash using any KDZ and DZ (H901 and F600L) on both software, no luck. It's stopping between 4-36%..
I may try on another laptop in a few hours.
Any idea perhaps?
Click to expand...
Click to collapse
your phone just need the correct kdz then it back to life. see its model on motherboard to make sure what to flash
what error lgup is giving you if its stuck at 4% its not even start flashing. i faced that stuck at 4% then extracted kdz into dz then it flashed
samy2015 said:
your phone just need the correct kdz then it back to life. see its model on motherboard to make sure what to flash
what error lgup is giving you if its stuck at 4% its not even start flashing. i faced that stuck at 4% then extracted kdz into dz then it flashed
Click to expand...
Click to collapse
I'm attaching the error screenshot. The best I can get is 36%..
ardian1899 said:
I'm attaching the error screenshot. The best I can get is 36%..
Click to expand...
Click to collapse
you are trying to flash h901 20j if it will complete phone bricked again . try flash f600l 20e or f600l 30e try kdz and dz & let us see the error
samy2015 said:
you are trying to flash h901 20j if it will complete phone bricked again . try flash f600l 20e or f600l 30e try kdz and dz & let us see the error
Click to expand...
Click to collapse
Looks like I'm out of luck so far.
All of them happen at (or probably after) step display is showing "modem".
If I use kdz: H901xx returning "does not support refurbish process". F600Lxxx returning "Error: KDZ file is invalid. H901 -> F600L"
Any suggestion?
I'll try the TP again..