Database Info

Jesus!! My G pro 2 was bricked

As recently I used computer to edit the build.prop to disable the soft keys, however, when I put it to the system and then replaced it and rebooted it, nothing was shown and the screen was black after the LG logo gone. Who can help me...T..T

can you enter download mode?
if you can download a stock kdz firmware and install it with LG Flash Tool 2014
it is very easy

rowihel2012 said:
can you enter download mode?
if you can download a stock kdz firmware and install it with LG Flash Tool 2014
it is very easy
Click to expand...
Click to collapse
To enter download mode power off your phone. Than keep volume up pressed and connect to your PC. Than fire up Flash Tool and select kdz.

If KDZ is not success! You return yr phone to Download mode and flash .tot .dll
Good luck!

rowihel2012 said:
can you enter download mode?
if you can download a stock kdz firmware and install it with LG Flash Tool 2014
it is very easy
Click to expand...
Click to collapse
Planet X said:
To enter download mode power off your phone. Than keep volume up pressed and connect to your PC. Than fire up Flash Tool and select kdz.
Click to expand...
Click to collapse
Anonymax said:
If KDZ is not success! You return yr phone to Download mode and flash .tot .dll
Good luck!
Click to expand...
Click to collapse
Thanks all, I flash it successfully, but all the data were disappeared. Do you have any apps that can find the photos back? Because I have some photos in it.

i flashed with lg tools 2014 the firmware 10f but the phone boots to emergency mode immediatelly and doesn boot up android ? what shall i do ?

st0123123 said:
Thanks all, I flash it successfully, but all the data were disappeared. Do you have any apps that can find the photos back? Because I have some photos in it.
Click to expand...
Click to collapse
You can try " Disk Digger " apps from google play store
---------- Post added at 12:42 PM ---------- Previous post was at 12:35 PM ----------
mosh11 said:
i flashed with lg tools 2014 the firmware 10f but the phone boots to emergency mode immediatelly and doesn boot up android ? what shall i do ?
Click to expand...
Click to collapse
Perhaps you missed some critical step, there several guideline in the forum to recovery our phone.

you must flash with phonemode (diag) not emergency mod
flash the kdz again with the wright mod

rowihel2012 said:
you must flash with phonemode (diag) not emergency mod
flash the kdz again with the wright mod
Click to expand...
Click to collapse
that did it thanks

thanks
Planet X said:
To enter download mode power off your phone. Than keep volume up pressed and connect to your PC. Than fire up Flash Tool and select kdz.
Click to expand...
Click to collapse
I am trying too many roms lately and you commented helped me alot.

Unbrick all lg model no download,no recovery,no fastboot,no sign of life

HI FRIENDS TODAY I AM GOING TO GIVE FULL AND EXPLAINED TUTORIAL TO UNBRICK ANY LG MODEL ( NOT SUPPORTED BY JTAG,OCTOPUS BOX)
PROBLEM INTRODUCTION
NO DOWNLOAD MODE
NO RECOVERY MODE
NO FASTBOOT MODE
FASTBOOT MODE
LG LOGO STUCK
PC DETECT AS QHSUSB BULK
PARTITION POP UP WHEN CONNECTED TO PC
SECURITY ERROR
KERNEL CRASH
NO SIGN OF LIFE
WHY MY PHONE BRICKED????????​JUST FLASHING WRONG ROM ( MOST IN CASE OF REFURBISHED PHONE PURCHASED FROM THIRD PARTY SELLER)
FLASHING WRONG RECOVERY
FLASHING KERNEL
FLASHING KERNEL
DURING UPDATES ( FAILED OR INTERRUPTED)
AND MANY OTHER CAUSES​
TOOLS REQUIREMENT ​LG FLASH TOOL FOR KDZ AND TOT FILE( http://forum.xda-developers.com/showthread.php?t=2432476​(CREDIT GOES TO HYELTON)​TOT OR KDZ FILE ( DEPENDING ON SITUATION) >>>>>>>>>>( KEEPING BOTH FILES RECOMMENDED)​LG FIRMWARE EXTRACTOR ( http://forum.xda-developers.com/showthread.php?t=2600575) >>>>>>>>>>>> ( DOWNLOAD LATEST VERSION)​
ANDROID SDK SLIM mod edit - malicious link removed) >>>>>>>>>>>> ( USEFULL TO UNBRICK PHONE IN FASTBOOT MODE)​
QUALCOMM DRIVER ( http://www.mediafire.com/download/pba9wajnehr9qwg/Qualcomm+USB+Drivers.rar )>>>>>>>> ( for qhsusb bulk mode)​
PDANET FOR ADB DRIVER ( http://pdanet.co/a/)
IF YOU FLASHED WRONG RECOVERY OR MODIFY PARTITION THEN YOU WILL STUCK IN FASTBOOT
SOLUTION FOR FASTBOOT
EXTRACT ANDROIDSDKSLIM.ZIP FILE ON DESKTOP ( ANY WHERE)
INSTALL PDANET AND CHOOSE LG COMPLETE INSTALLATION
DOWNLOAD PARTITION FILE FOR YOUR MODEL ( IF D802 THEN USE ONLY PARTITION FILE FOR D802) >>>>>>>>>> ( http://downloads.codefi.re/autoprime/LG/LG_G2)
NOTE : 1) YOU CAN EXTRACT PARTITION FILE FROM KDZ OR TOT FILE USING LGFIRMWARE EXTRACTOR TOOL
FOLLOW THIS VIDEO TO KNOW HOW TO EXTRACT PARTITION FILE
2) PARTITION FILE MUST BE IN .img FORMAT ( WHEN WE EXTRACT PARTITION FILE FROM KDZ OR TOT THEN IT IS IN .bin FORMAT SO SIMPLY RENAME FROM .bin to .img )
3) YOU NEED TO EXTRACT 10 FILES FROM TOT ( aboot, boot, sbl1, dbi, laf, recovery, modem, misc, rpm, tz ) and 9 FILES FROM KDZ ( misc file is not present in kdz so dont worry it is not important)
AFTER EXTRACTING PARTITION FILE AND RENAMING THEM YOU WILL GET 10 OR 9 FILE ( aboo.img, boot.img, laf.img, recovery.img, sbl1.img, dbi.img, rpm.img, tz.img, misc.img) and REMOVE ANY NUMBER FROM THE NAME OF FILES ( SUPPOSE YOU GET aboot_21345.bin THEN RENAME TO aboot.img)
NOW COPY THESE PARTITION FILE IN THE LAST FOLDER (PLATFORM-TOOLS) OF ANDROIDSDKSLIM FOLDER.
NOW CONNECT YOUR PHONE TO PC IN FASTBOOT MODE ( OPEN DEVICE MANAGER AND SEE ON THE TOP THERE WILL ANDROID ADB INTERFACE UNDER ANDROID PHONE. IF NOT THEN CHECK ADB DRIVER INSTALLED PROPERLY OR NOT.
NOW GO TO THE THE FOLDER PLATFORM -TOOL INSIDE ANDROIDSDKSLIM FOLDER.
NOW PRESS AND HOLD SHIFT BUTTON ON KEYBOARD AND RIGHT CLICK IN THAT FOLDER AND YOU WILL GET AN OPTION OPEN COMMAND PROMPT OR WINDOW HERE. CLICK ON IT AND YOU WILL GET CMD WINDOW.
NOW TYPE fastboot devices ( IT WILL SHOW YOUR DEVICES )
NOW TYPE THESE COMMAND
fastboot erase recovery
fastboot erase laf
fastboot flash laf laf.img
fastboot reboot
exit​NOW REMOVE USB CABLE AND SWITCH OFF YOUR PHONE BT LONG PRESSING POWER BUTTON
NOW PRESS AND HOLD VOL UP AND CONNECT TO PC AND YOU WILL GET DOWNLOAD MODE FIXED
HURREYYYYYYYYYYYYYY
GO AND FLASH STOCK ROM ( http://forum.xda-developers.com/showthread.php?t=2432476)
IF YOU STILL STUCK IN FASTBOOT MODE THEN TYPE THESE COMMAND ( erase all 10 or 9 file and flash them one by one as shown)
fastboot erase aboot ( this command will erase aboot.img from phone)
fastboot flash aboot aboot.img ( this command will flash aboot to phone )
fastboot erase boot
fastboot flash boot boot.img
fastboot erase laf
fastboot flash laf laf.img
fastboot erase rpm
fastboot flash rpm rpm.img
fastboot erase recovery
fastboot flash recovery recovery.img
fastboot erase modem
fastboot flash modem modem.img
fastboot erase misc
fastboot flash misc misc.img
fastboot erase sbl1
fastboot flash sbl1 sbl1.img
fastboot erase tz
fastboot flash tz tz.img
fastboot erase dbi
fastboot flash dbi dbi.img
fastboot reboot
exit​NOW REMOVE USB CABLE AND SWITCH OFF YOUR PHONE BT LONG PRESSING POWER BUTTON
NOW PRESS AND HOLD VOL UP AND CONNECT TO PC AND YOU WILL GET DOWNLOAD MODE FIXED
HURREYYYYYYYYYYYYYY
GO AND FLASH STOCK ROM ( http://forum.xda-developers.com/showthread.php?t=2432476)
SOLUTION FOR ALL THE PROBLEM WITH NO DOWNLOAD MODE​YOU NEED TO FORCE PHONE INTO QHSUSB BULK MODE BY SHORTING TEST POINT
WHEN YOU GET QHSUSB BULK MODE IN DEVICE MANAGER THEN INSTALL QUALCOMM DRIVER ( http://www.mediafire.com/download/pba9wajnehr9qwg/Qualcomm+USB+Drivers.rar)
NOTE : THERE ARE TWO MODE IN QHSUSB BULK
1) QUALCOMM HS-USB 9006
THIS MODE IS VERY EASY TO FIX. YOU NEED THE PARTITION FILE THAT WE GET IN THE STARTING TO SOLVE FASTBOOT MODE)
TO SOLVE 9006 FOLLOW THIS METHOD ( http://forum.xda-developers.com/showthread.php?t=2582142 )
UBUNTU METHOD IS UNIVERSAL IT CAN BE USED FOR ANY PHONE IN 9006 ( UNBRICK VERY PARTITION METHOD ( http://forum.xda-developers.com/lg-g2/general/unbrick-lg-g2-qhsusbbulkqualcomm-9006-t2939627) BY TUNG KICK IS ONLY FOR G2 HOWEVER IT CAN BE USED FOR GPRO2 AND G FLEX BUT I M NOT SURE IT MAY NOT WORK OR BRICKED MORE)
WHEN YOUR PHONE GET STUCK IN 9006 THEN LOTS OFF DRIVE POP UP WHEN CONNECTED TO PC ( MOST IMPORTANT IDENTIFICATION)
2 ) QUALCOMM HS-USB 9008
IF YOU STUCK IN 9008 THEN THIS IS THE SUPER HARD BRICK MODE.
CONTACT aftabalam8c2 ( http://forum.xda-developers.com/member.php?u=4554553 ) this guy not only can unbrick lg g2 , g3 but g pro 2, g flex, vu3, vu2, nexus4 , nexus 5, lg g , lg gpro, and around MORE THAN 30 ( I DONT KNOW BUT HE TOLD ME ALL HE CAN UNBRICK MORE THAN 50 ) devices of lg which not supported by JTAG OR OCTOPUS BOX.​
ACCORDING TO HIM MOST USER DAMAGED DURING SHORTING OF TEST POINT ( SO BETTER TO ASK HIM BEFOR SHORT)
I NEVER SHORTED SO DONT ASK ME. HE ALSO MADE A SERIES OF TEST POINT ON YOU TUBE FOR MANY DEVICES BUT THESE VIDEO ARE NOT PUBLIC NOW. MAY BE HE MAKE ALL VIDEOS PRIVATE AFTER SOME GUY CHEATED HIM ON XDA ( CONCLUDED FROM HIS COMMENTS)
AND THE ACCOUNT OF THIS GUY DISABLED BY XDA FOR 1 WEEK ( I ASKED HIM PERSONALY ON WHATS APP)
SO IF YOU WANT THE TEST POINT FOR ANY PHONE ASK HIM​.
THIS GUY UNBRICKED MY LG G FLEX IN 20 MINUTES IN FRONT OF ME ( WE ARE FROM SAME STATE SO I WENT HIS HOME)
FO THE FULL STORY OF LG G FLEX UNBRICKING SEE THIS ( http://forum.xda-developers.com/lg-...nload-mode-t3059257/post59555140#post59555140)
SO THE MOST IMPORTANT THING IS TO SHORT THE TEST POINT CORRECTLY WITHOUT DAMAGING EMMC ( I WOULD ADVICE ALL OF YOU PLEASE ASK HIM BEFOR SHORTING MAY HE SHARE THOSE VIDEOS ON YOU TUBE )
FOR COLLECTION OF TEST POINT SEE THIS ( http://forum.xda-developers.com/hardware-hacking/hardware/collection-test-phone-t3048736 )
SOLUTION FOR ERROR DURING FLASHING​FOLLOW THIS GUIDE ( http://forum.xda-developers.com/lg-g2/general/lg-g2-cross-dll-device-model-fota-laf-t3003717 )
THERE ARE MANY GUYS WHO CLAIM TO FIX YOUR BRICKED LG PHONE BUT I DONT KNOW THE AUTHENTICITY OF THESE GUYS
TUNGKICK WHICH IS ALSO WHO UNBRICK HAS VERY BAD RECORD, I SEEN THE POST MANY GUYS CLAIM THAT HE STEAL PASSWORD AND DATA FROM THEIR PC AND TOOL HE USED INSTALL KEYLOGGER TO YOUR PC ( I AM JUST TELLING THE COMMENTS ON GUYS AND THEY ALSO UPLOADED SOME PIC FOR THE PROOF)​
THANKS SO MUCH
THREAD UNDER CONSTURCTION ( I WILL UPDATE PICTURE FOR MORE DETAILS )​
to be continue..........

Hi Guys, pls help me.
This is not the first time i tried to update firmware using KDZUpdater [KDZ_FW_UPD.exe] .
But this is the first time my device has been bricked.
During updating my firmware, i was in "Emergency Mode" and i received some error on KDZUpdater GUI Console.
As i was unable to move from "Emergeny Mode", i tried again to update firmware, but again i got some error.
I thought removing the battery will do some good, but i was wrong.
Now my mobile is as good as "BLACK BRICK".
It even doesn't detect in "Device Manager".
Note:
Before using "KDZUpdater", i had disabled "LG modems" from device manager.
Pls help me on this.
Sent from my TCL J636D+ using XDA Free mobile app

vcforums said:
Hi Guys, pls help me.
This is not the first time i tried to update firmware using KDZUpdater [KDZ_FW_UPD.exe] .
But this is the first time my device has been bricked.
During updating my firmware, i was in "Emergency Mode" and i received some error on KDZUpdater GUI Console.
As i was unable to move from "Emergeny Mode", i tried again to update firmware, but again i got some error.
I thought removing the battery will do some good, but i was wrong.
Now my mobile is as good as "BLACK BRICK".
It even doesn't detect in "Device Manager".
Note:
Before using "KDZUpdater", i had disabled "LG modems" from device manager.
Pls help me on this.
Sent from my TCL J636D+ using XDA Free mobile app
Click to expand...
Click to collapse
You have only one option.
You need to force your phone into qhsusb bulk mode by shorting test point.

What does that mean??
Will this be done through software or I need some special hardware or should I sent to LG service centre.
Pls guide
Sent from my TCL J636D+ using XDA Free mobile app

vcforums said:
What does that mean??
Will this be done through software or I need some special hardware or should I sent to LG service centre.
Pls guide
Sent from my TCL J636D+ using XDA Free mobile app
Click to expand...
Click to collapse
You need to open your phone and do short of some pins.
A guys named aftabalam8c2 has full tutorial video how to do this.
And he will help u.
I m posting his contact details in pm

I have no download mode, but rom still works fine. cant root and cant start into recovery.
I solved the QHUSB 9006 Method in ubuntu, but after filling the partitions, all is like before, still NO download mode.....

Lg g3 f460s no download mode nor flashboot
I have lg g3 prime.
Lg g3 f460s from koria, sk telecom.
I want to install a custom rom, but it failed and i havent kept backup of stock rom, so first it shows " secure boot error" then i again go to fastboot mode and by mistake flash wrong file at boot partition & recovery partition.
After that when i switch on my phone it shows secure boot error & after it 's switched off.
When i press vol+ and insert in usb , download mode dialog comes and after 5 to 6 seconds it switch off automatically.
Not any key combination work for recovery mode & fastboot mode.
Means my phone have not download mode and not fastboot mode.
Now what should i do for unbrick it.

Don't support with lg l65 D280g?
friend you help me with D280g lg? help me pliz

I have the g pro 2 with no download mode just lg logo what should I do?

---------- Post added at 05:30 PM ---------- Previous post was at 05:28 PM ----------
SANJAYTHL said:
I have lg g3 prime.
Lg g3 f460s from koria, sk telecom.
I want to install a custom rom, but it failed and i havent kept backup of stock rom, so first it shows " secure boot error" then i again go to fastboot mode and by mistake flash wrong file at boot partition & recovery partition.
After that when i switch on my phone it shows secure boot error & after it 's switched off.
When i press vol+ and insert in usb , download mode dialog comes and after 5 to 6 seconds it switch off automatically.
Not any key combination work for recovery mode & fastboot mode.
Means my phone have not download mode and not fastboot mode.
Now what should i do for unbrick it.
Click to expand...
Click to collapse
Same here..have you found a fix yet?

daredavel said:
---------- Post added at 05:30 PM ---------- Previous post was at 05:28 PM ----------
Same here..have you found a fix yet?
Click to expand...
Click to collapse
got the solution but can't find the apropriate files, i am showing the method, if you find the files let me know.
1. with willcracker board diag,
in that case you need chipset file for apq8084 (snapdragon 805), i have searched to many but cant find. in that case you need original (latest on your phone) firmware in .tot file and convert it in .mbn file. this you can do in willcracker. only the problem is apq8084 chipset files and latest firmware in tot file. you can find it in .kdz but cant get it in .tot file.
2. with qpst programme. (qfil programe)
in this method you need programmer file, rawprogram.xml & patch.xml of the same version phone (f460s) and yes original firmware.
you can find both program on google or xda.
if you got the appropriate files let me know and share with me.
thanks in advance.

Help
Cannot unbrick ls996 in q-bulk mode. tried everything...every site. Even tried to contact member mentioned in post. Im willing to work hard to unbrick, NOT looking for easy way...out...but im no phone technican by all means. Thanks!!!

I've got a E975 (Optimus G Intl) to unbrick here.
I've got it to fastboot mode, but I can't get the laf.img and dbi.img files (they are not in the .kdz or .dz files).
Can anyone give me a help?

Wrong ROM install in LG f460s
SANJAYTHL said:
got the solution but can't find the apropriate files, i am showing the method, if you find the files let me know.
1. with willcracker board diag,
in that case you need chipset file for apq8084 (snapdragon 805), i have searched to many but cant find. in that case you need original (latest on your phone) firmware in .tot file and convert it in .mbn file. this you can do in willcracker. only the problem is apq8084 chipset files and latest firmware in tot file. you can find it in .kdz but cant get it in .tot file.
2. with qpst programme. (qfil programe)
in this method you need programmer file, rawprogram.xml & patch.xml of the same version phone (f460s) and yes original firmware.
you can find both program on google or xda.
if you got the appropriate files let me know and share with me.
thanks in advance.
Click to expand...
Click to collapse
I have same issue wrong ROM installed on LG f460s and I have no download mode, no recovery, no fastboot no charging shown, no sign of life, just Qualcomm HS-USB QDLoad 9008 is shown in device manager when connect to PC.. I am searching APQ8084 folder to paste in boarddiag tool, Dear if you have found any other way to solve this issue please let me know. thanx in advance

power outage while flashing kdz on LG C660
Please help... I know my phone is a little outdated but I would still love use it for my daily routine . I'm in the middle of flashing the original firmware when the power outage happened. Now it won't power on at all. Been searching for days on what pins/components to short to force it into qhsusb bulk mode but no luck. I hope someone can help me...:crying:

tobitab said:
Please help... I know my phone is a little outdated but I would still love use it for my daily routine . I'm in the middle of flashing the original firmware when the power outage happened. Now it won't power on at all. Been searching for days on what pins/components to short to force it into qhsusb bulk mode but no luck. I hope someone can help me...:crying:
Click to expand...
Click to collapse
Which phone??

Anyone there" help me" i hav bricked my lg g2 f320k" wenever i connect my phone to pc" lots of partitions comes up

superguy19 said:
Which phone??
Click to expand...
Click to collapse
My phone is LG Optimus Pro C660...
---------- Post added at 01:32 PM ---------- Previous post was at 01:18 PM ----------
superguy19 said:
Which phone??
Click to expand...
Click to collapse
Ajayz said:
Anyone there" help me" i hav bricked my lg g2 f320k" wenever i connect my phone to pc" lots of partitions comes up
Click to expand...
Click to collapse
Have you tried checking on the 'Device Manager' what mode is the phone in 'Ports' section when connected to pc?
After that there are instructions in the first page for every mode. My phone doesn't show up and I needed it to force into
qhsusb bulk mode in order to proceed...

Bricked LG H440n
Hello guys I have bricked my LG H440n in an attempt of unlocking the bootloader. My phone doesn't get recognised by pc, I can only enter fastboot mode, but command like "fastboot erase aboot" are not working, it just says remote: "unknown command". Can anyone help me where can I find the pins to short on this phone?

Hello!
I would like to ask some help with my hard bricked G3 D855 16GB, i installed wrong rom
My english is not a best, and i dont dare to do anything. I have win 8.1. I dont know about Linux, and virtual PC.
I will very glad that someone can help me maybe via teamviewer. I also donate You. Please
If you think that You can help me maybe, please write me.

H955 soft brick?

Hi!
I have same problem as here:
http://forum.xda-developers.com/g-flex2/help/h950-5-1-1-v11z-bricked-bootloop-lg-t3223221
But i dont delete rootedsystem.img
I tried this guide:
http://forum.xda-developers.com/g-flex2/development/lg-g-flex-2-ls996-zv6-sprint-5-1-1-t3169212
But first time dont work, then i copy bad copy command and i run "dump" command, what does it mean?Its all deleted?I think it shoud be for backup no?And when im now trying to do flash cmd, the hashtag dont dissappered.
Any idead?I have last V15C rom, so i dont can use LGFlashtool, because downgrade doesnt work?

Yes you can use LG Flash Tool to restore your phone to stock and unbrick your device. Download V15c stock kdz file and flash it with lg flash tool from download mode (turn of the phone, hold volume up and connect your phone to pc). Run lg flash tool, browse for v15c kdz, select csm flash to format all data, and pres start, wait for 5-10 minutes and watch progres bar on the phone. If lg flash tool crash after phone reboots, never mind it is ok.
So you do not need to downgrade because there is a v15c kdz, I use this method to unroot and revert everything as new.
Sent from my LG-H955 using Tapatalk

Yeah, i done it yesterday before your post.Luckily i have found all Flex 2 firmwares, so i flash correct one.But thanks for your answer.

[Recovery][cv1] TWRP 3.2.3.0 For LM-X210 Devices

Compatible Devices:
LG K8+
LG Aristo 2, 2+
LG K9
LG Phoenix 4
Thanks to @AustinGarrick1818 who discovered that this TWRP originally started and developed for the Aristo 2, by @messi2050 and @armandop_, then later updated to the latest version by @tecknight, was able to be flash on the Phoenix 4 leading to the idea that any cv1 device is cable of a ROOT method/TWRP Recovery.
Pre-Requisites:
USB Debugging Enabled​
OEM Unlock Enabled​
ADB/Fastboot Device Drivers​
Your Phone/Brain​
Hey guys! Just a heads up, I'm not responsible for any bricked devices or broken devices. So flash at your own risk! This TWRP has the Oreo Kernel from the Aristo 2's Oreo Firmware release.
Downloads
Latest Recovery by @tecknight Here --> https://www.androidfilehost.com/?fid=11410963190603906754​Latest USB Drivers --> https://www.lg.com/us/support/software-firmware-drivers​
Instructions:
1. Install the ADB Drivers from above. If you have them don't bother. Just move on. If you don't then make sure to install them somewhere easily accessible, as your gonna want to get to them easily.
2. Place the TWRP image in the ADB Folder for later use and plug your phone into your PC. Then press (Shift+Right Click) and select "Open Command Prompt Here".
3. After that type the next few lines of code:
Code:
adb devices
Code:
adb reboot bootloader
4. It should boot into fastboot mode. From there type:
Code:
fasboot devices
Code:
fastboot flashing unlock
5. To prevent fastboot from encrypting cache and data type:
Code:
fastboot erase userdata
Code:
fastboot erase cache
6.Remember the Recovery image? Rename it to rec.img and flash it like this:
Code:
fastboot flash recovery rec.img
7. Now that you've flashed TWRP test it:
Code:
fastboot reboot recovery
NOTE: Anytime you boot up your phone you will get a message saying that the bootloader is locked and you need to lock it. Don't do it. If you do then you phone will soft brick and get stuck in a bootloop. Just let it boot.
8. If you did everything right you should be brought to TWRP.
PLEASE LEAVE A THANKS! THANKS!

Downgrade?
Hey man thanks for pointing out that this will work with the all cv1 devices... I have the Aristo 2 on Metro... Is it possible to flash twrp while on the official Oreo firmware or do I have to downgrade to Nougat?
Last time I was on xda it was stated that you couldn't flash in fastboot while on official Oreo...

tdawgg777 said:
Hey man thanks for pointing out that this will work with the all cv1 devices... I have the Aristo 2 on Metro... Is it possible to flash twrp while on the official Oreo firmware or do I have to downgrade to Nougat?
Last time I was on xda it was stated that you couldn't flash in fastboot while on official Oreo...
Click to expand...
Click to collapse
Yah, it's still like that unfortunately. But you can downgrade to Nougat with LG Uppercut. You should just flash the TWRP on Nougat firmware because it's not locked. So when you downgrade just follow these steps to get Oreo. Also don't install Tec's version of Oreo Firmware. Just jump to my other thread for my Custom Stock ROM. Tec's flashes Oreo Firmware with Oreo Stock Rooted. But mine just flashes the nesassary Oreo Boot and System. The links on my signature.
By the way for anyone wondering the LG Phoenix 4 can be Rooted this way to.

NonStickAtom785 said:
Compatible Devices:
LG K8+
LG Aristo 2, 2+
LG K9
LG Phoenix 4
Thanks to @AustinGarrick1818 who discovered that this TWRP originally started and developed for the Aristo 2, by @messi2050 and @armandop_, then later updated to the latest version by @tecknight, was able to be flash on the Phoenix 4 leading to the idea that any cv1 device is cable of a ROOT method/TWRP Recovery.
Pre-Requisites:
USB Debugging Enabled
OEM Unlock Enabled
ADB/Fastboot Device Drivers
Your Phone/Brain
Hey guys! Just a heads up, I'm not responsible for any bricked devices or broken devices. So flash at your own risk! This TWRP has the Oreo Kernel from the Aristo 2's Oreo Firmware release.
Downloads
Latest Recovery by @tecknight Here --> https://www.androidfilehost.com/?fid=11410963190603906754
Latest USB Drivers --> http://tool.cdn.gdms.lge.com/dn/downloader.dev?fileKey=UW00120120425
Instructions:
1. Install the ADB Drivers from above. If you have them don't bother. Just move on. If you don't then make sure to install them somewhere easily accessible, as your gonna want to get to them easily.
2. Place the TWRP image in the ADB Folder for later use and plug your phone into your PC. Then press (Shift+Right Click) and select "Open Command Prompt Here".
3. After that type the next few lines of code:
4. It should boot into fastboot mode. From there type:
5. To prevent fastboot from encrypting cache and data type:
6.Remember the Recovery image? Rename it to rec.img and flash it like this:
7. Now that you've flashed TWRP test it:
NOTE: Anytime you boot up your phone you will get a message saying that the bootloader is locked and you need to lock it. Don't do it. If you do then you phone will soft brick and get stuck in a bootloop. Just let it boot.
8. If you did everything right you should be brought to TWRP.
PLEASE LEAVE A THANKS! THANKS!
Click to expand...
Click to collapse
If fastboot flashing unlock fails try fastboot oem unlock

tdawgg777 said:
Hey man thanks for pointing out that this will work with the all cv1 devices... I have the Aristo 2 on Metro... Is it possible to flash twrp while on the official Oreo firmware or do I have to downgrade to Nougat?
Last time I was on xda it was stated that you couldn't flash in fastboot while on official Oreo...
Click to expand...
Click to collapse
As long as your bootloader is unlocked it won't be a problem at least on the LG Phoenix 4 it can have TWRP with Oreo

hello good night I can not enter bootloader mode I always reboot in normal mode the phone, I do it this way c: adb / adb reboot bootloader but I started normal tengop a lg k9 x210em I do not understand the truth any suggestion excuse my English

hello good night I can not enter bootloader mode I always reboot in normal mode the phone, I do it this way c: adb / adb reboot bootloader but I started normal, a lg k9 x210hm I do not understand the truth any suggestion

tazlooney89 said:
hello good night I can not enter bootloader mode I always reboot in normal mode the phone, I do it this way c: adb / adb reboot bootloader but I started normal, a lg k9 x210hm I do not understand the truth any suggestion
Click to expand...
Click to collapse
on my device is the same

Problem!!!
I do what you write in tutorial but my phone dont run on fastboot mode Please HELP!!!

Do we know anything about unbricking these phones? I've got a US Cellular K8+ (LG-X210ULM) that my wife accidentally bricked a while back while trying to flash TWRP (not this particular build, obviously). I think she said everything seemed fine and then on reboot...well, it just never turned on again. PC doesn't pick it up at all, no Qualcomm mode or anything. Based on that, I had assumed it was a lost cause that would take JTAG to bring back, and it may well be...
...but then I noticed something unusual the other day. For the hell of it, I decided to plug it into a charger and let it sit for a while. I got what I expected, which was nothing at all. Oh well. Anyway, I happened to be working with another X210 at the time but only had one battery handy, so I just popped the one out of the "dead" phone without unplugging it and went about with what I was doing. After about 5-10 minutes, something caught my eye - sure enough, the dead phone's screen was now on, displaying the "?" battery screen. I put the battery back into the phone and got unceremoniously dumped straight back to black nothingness. Oh well.
So yeah, the phone still doesn't seem to respond to anything when connected to the PC with no battery, so it's probably a no-go, but the fact that it still shows the no-battery screen tells me it's not quite *as* bricked as I thought it was at least. Any ideas? Are we lucky enough to do a boot-from-SD trick on this phone?

Lmx210cm twrp
Do you happen to have anything for the lmx210cm?

Ausboz said:
Do you happen to have anything for the lmx210cm?
Click to expand...
Click to collapse
Just created a whole EDL firmware for the Aristo 2 aka Phoenix 4. PM me for the links if you'd like a copy. I also found our prog_emmc_firehose_8917_ddr.mbn to flash with (it works)
---------- Post added at 05:16 AM ---------- Previous post was at 05:13 AM ----------
tdawgg777 said:
Hey man thanks for pointing out that this will work with the all cv1 devices... I have the Aristo 2 on Metro... Is it possible to flash twrp while on the official Oreo firmware or do I have to downgrade to Nougat?
Last time I was on xda it was stated that you couldn't flash in fastboot while on official Oreo...
Click to expand...
Click to collapse
I tested oreo and it works file

AustinGarrick1818 said:
Just created a whole EDL firmware for the Aristo 2 aka Phoenix 4. PM me for the links if you'd like a copy. I also found our prog_emmc_firehose_8917_ddr.mbn to flash with (it works)
---------- Post added at 05:16 AM ---------- Previous post was at 05:13 AM ----------
I tested oreo and it works file
Click to expand...
Click to collapse
Hi would mind telling how to flash that firmware amd whats the prog_+++++++ddr.mbn to flash i have aristo 2 android 8.1 metro and i cant do any flash in fastboot or root it anything you know about it will be appreciated so much...

@NonStickAtom785 Any solution to start fastboot mode, the phone? Whenever I try to start it from CMD the phone restarts normally, there is no way to get into fastboot mode.
I already probe manually, with combination of buttons, and it does not work either, the model is the LX210HM

tazlooney89 said:
@NonStickAtom785 Any solution to start fastboot mode, the phone? Whenever I try to start it from CMD the phone restarts normally, there is no way to get into fastboot mode.
I already probe manually, with combination of buttons, and it does not work either, the model is the LX210HM
Click to expand...
Click to collapse
Have you tried installing the Aristo 2 firmware on your phone? In theory these phones have the same build and processors. Also in theory, but proven to work on some other cv1 devices (LG Phoenix 4), you should be able to flash Aristo 2 firmware and unlock your phone that way. I would also check your system.img to see if anything such as a security patch is in place to keep your phone from rebooting to the bootloader. You can backup the system.img manually and send me the img and I will look for anything that different from the Aristo 2 system.img.
Also by backing up the system.img and sending it to me, I can retrieve any "extra" carrier settings and add them to the cv1 img. I'm working on a full stock cv1 firmware img that will work on all the cv1 devices as a root strategy.

I have Lg K9 ( lmx210em ) and it's IMPOSSIBLE enter in fastboot mode, either with key combinations, either with adb command... The phone always boot in normalk mode !!!
Download mode and recowery mode work properly, but fastboot mode DID NOT !!!

urgent
i need the firmware the phoenix 4 please

NonStickAtom785 said:
Compatible Devices:
LG K8+
LG Aristo 2, 2+
LG K9
LG Phoenix 4
Thanks to @AustinGarrick1818 who discovered that this TWRP originally started and developed for the Aristo 2, by @messi2050 and @armandop_, then later updated to the latest version by @tecknight, was able to be flash on the Phoenix 4 leading to the idea that any cv1 device is cable of a ROOT method/TWRP Recovery.
..............
[/COLOR][/SIZE]
Click to expand...
Click to collapse
I'm assuming this will not work on the LG Aristo 2 Verizon PrePaid LM-X210VPP ? Or am i wrong? I have one here in inventory that just needs a new LCD and Digitizer ($20) and I was thinking about fixing it and modding it but worried about Verizon and the bootloader being locked. Have not found a lot of info on this device just yet so debating whether or not to keep / fix or get rid of it.
---------- Post added at 01:24 AM ---------- Previous post was at 01:22 AM ----------
AustinGarrick1818 said:
Just created a whole EDL firmware for the Aristo 2 aka Phoenix 4. PM me for the links if you'd like a copy. I also found our prog_emmc_firehose_8917_ddr.mbn to flash with (it works)
---------- Post added at 05:16 AM ---------- Previous post was at 05:13 AM ----------
I tested oreo and it works file
Click to expand...
Click to collapse
Did anyone get this guys debrick package? And does it have the xml's already created? Either way I would like a copy. If someone can pm me a link to a download or email me it that would be awesome.

i installed twrp and rooted the lmx210cm however now when i boot i shows a black bar at bottom of screen... top of image is cut off and touch screen is unresponsive.... works fine in twrp... what did i do wrong?

jdthomas4181 said:
i installed twrp and rooted the lmx210cm however now when i boot i shows a black bar at bottom of screen... top of image is cut off and touch screen is unresponsive.... works fine in twrp... what did i do wrong?
Click to expand...
Click to collapse
The issue you describe appears to be caused by kernel incompatibilities between certain partitions of the phone.
The fact that TWRP does not have the screen glitching issue implies that the kernel embedded in the TWRP image you flashed IS compatible, but perhaps the kernel within your boot image is NOT.
My first question would be:
You mention that you rooted your phone from fastboot.
Did you:
1. patch the stock boot image on your phone or
2. flash a pre-rooted boot image to your boot partition or
3. Flash a pre rooted ROM to your phone
If you answered #2 or #3, then my secondary question would be:
Specifically which boot image or ROM did you flash to your phone ?
---------- Post added at 08:35 PM ---------- Previous post was at 08:32 PM ----------
noidodroid said:
I'm assuming this will not work on the LG Aristo 2 Verizon PrePaid LM-X210VPP ? Or am i wrong? I have one here in inventory that just needs a new LCD and Digitizer ($20) and I was thinking about fixing it and modding it but worried about Verizon and the bootloader being locked. Have not found a lot of info on this device just yet so debating whether or not to keep / fix or get rid of it.
---------- Post added at 01:24 AM ---------- Previous post was at 01:22 AM ----------
Did anyone get this guys debrick package? And does it have the xml's already created? Either way I would like a copy. If someone can pm me a link to a download or email me it that would be awesome.
Click to expand...
Click to collapse
I did not get the edl package, but I really want it and of course his account is suspended.
Anybody have it ?
Also this method should be capable of working on your phone, as it is a cv1 device.
You may have to downgrade the firmware to Nougat before proceeding if the device is currently running Oreo.
If the device is currently running Oreo or later, you can downgrade the phone to Nougat using the LGUP utility

lg gpad v410 boatloader

does the att have a boatloader, does it respond to commands ? thanks

root with 360
flash twrp
flash 14.1 nightly
take zlmage from lg gpad replace in CrazySuperKernel-CM14.1-V9.0-D855.zip
fill out v410 anykernel2 and rezip
it should get stuck on the boatloader page or fastboot mode
if you have any problems hold the power button and go back to twrp

Can you link 360

Can you link 360