hi all
help me please , i was using ADB to turn the S-ON , the phone restarted and never came back ....
even when i press the start button nothing happens , i tried the press sound down and open ... nothing
i tried to connect it to the pc , nothing , please help me as HTC EGYPT say they dont have the sw to fix it and wants to replce the motherboard !!!!!
Does your PC detect phone? Try writing command "adb devices", if not try to remove battery and let it for 5minutes and try again, also was your battery full charged before you tryed this?Try let it charge a bit if none of above helps.
But if nothing of that helps i dont see what else could you do..its dead and you need to service it..
nope , ADB doesn't detect it
Before you did the command for S-On did you flash back to stock with the original RUU that came with the phone?
You have corrupted your device and are now in QHSUSB download mode (used by Qualcomm to flash drivers and such to the cpu) and yes you are bricked.
ouch. that sucks lol
Look at the bright side of things. Use this as a learning experience. Now you know what NOT to do with your phone the next time.
Sent From My Pocket
then since i am offically bricked , what is the way out
nope i didnt i did these steps
6.enter the command "fastboot oem writesecureflag 3" (Thanks Dazweeja)
7. Reboot into bootloader using "fastboot reboot-bootloader" or remove & reinsert the battery and press power on while keeping hold of volume down.
ehaballam said:
then since i am offically bricked , what is the way out
Click to expand...
Click to collapse
Call your carrier or HTC and hope they take pity on you, but you'll likely be on the hook for this one.
SOLVED already!
Hello everyone,
i'm new to this so excuse if i do wrong something (title etc..).
I wanted to root my Huawei vns-l31 so i used the srk tool for enable the bootloader and then install the twrp; it seemed that all go right but when i tried to reboot in recovery mode i probably did something wrong in the timing with the combination of buttons and now the phone is stucked on the blackscreen with the message "your device has been unlocked etc etc.. your device is rebooting now.." the problem is that the device it's not really rebooting. I've tried the pwr for 10s, vol up+pwr, vol down+pwr but nothing..the phone doesn't go on fastboot and so i can't flash back anything. Pls help me i've read many threads on xda but no one worked for me.
again sorry if i broke some rules and for my bad english
Thanks to all that will answer this post.
Edit:i Just let the phone turno off because of the battere and then in reboot It showed me the three usual options..Maybe It was Just a bug. Still i dont know why It doesn't open the twrp..I'm Just bad at timing?
Hi, I hope someone can help me. Recently after i've tryed flash the new recovery something was wrong, after i've reboot my phone it start a boot loop, i can't access to recovery (probably there is none), the only thing the phone show me is a fastboot for few seconds if i press the power button and down volume, however after 20/30 sec it restart again, i've tried also connect into pc but without success (it show his self only for 1 sec under device management) than it continue his reboot. Various times i've tried with adb and fastboot but the pc not recognizes the phone.
Nobody can help me?
Solved! patience, sp flash tool and a bit of lucky have allowed this goal. :good::laugh:
Hello guys, right now i'm in big troubles with my FRD-L09C432. I tried to flash the rollback package (wich was working yesterday) but this time after the flashing process phone won't boot, i tried to enter recovery mode but i couldn't. Then i entered in fastboot mode and unlocked bootloader in order to reset the phone. I entered yes on the screen and the phone tried to reboot but now it is stuck on "your phone is unlocked..." and at the bottom: "your phone is booting now". But nothing happen and right now i cannot access recovery, or fastboot or even dload nothing works, i disconnected the battery and started the phone again but nothing... When i try to rebbot it in fastboot, recovery or dload mode it just vibrates twice and show the same screen with "your phone is booting now"
I'm really desperate i have never had a hopeless situation like that, i need your help, thanks a lot for any suggestion or idea that i could try.
:crying:
Up...
Rayan19997 said:
Hello guys, right now i'm in big troubles with my FRD-L09C432. I tried to flash the rollback package (wich was working yesterday) but this time after the flashing process phone won't boot, i tried to enter recovery mode but i couldn't. Then i entered in fastboot mode and unlocked bootloader in order to reset the phone. I entered yes on the screen and the phone tried to reboot but now it is stuck on "your phone is unlocked..." and at the bottom: "your phone is booting now". But nothing happen and right now i cannot access recovery, or fastboot or even dload nothing works, i disconnected the battery and started the phone again but nothing... When i try to rebbot it in fastboot, recovery or dload mode it just vibrates twice and show the same screen with "your phone is booting now"
I'm really desperate i have never had a hopeless situation like that, i need your help, thanks a lot for any suggestion or idea that i could try.
:crying:
Click to expand...
Click to collapse
Here is a link to my own experience of a similar situation.
https://forum.xda-developers.com/honor-8/help/reverting-to-stock-t3685909
And here is another link that might help.
https://forum.xda-developers.com/honor-8/help/honor-8-hard-brick-t3709598
I hope these will help.
srgrusso said:
Here is a link to my own experience of a similar situation.
https://forum.xda-developers.com/honor-8/help/reverting-to-stock-t3685909
And here is another link that might help.
https://forum.xda-developers.com/honor-8/help/honor-8-hard-brick-t3709598
I hope these will help.
Click to expand...
Click to collapse
Thanks dude i'll read that for sure
Unfortunately i have no access to fastboot that's why even DC Phoenix cannot do anything...
fastboot ... conect phone to PC. If the phone its on or off dosend matter.
After conecting to PC hold volume - and power buton (first volume- !) .... and wait a while ... it may reboot severel times. befor enter fastboot.
After enter fastboot try this https://forum.xda-developers.com/honor-8/help/honor-8-hard-bricket-how-to-restore-t3739551
I pray to access this damn fastboot mode dude but i've tried everything and i cannot get into it even when i disconnect/reconnect the battery
My opinion is that the phone tries to reboot in order to reset itself but smthg prevent it from rebooting correctly, a friend told me the boot is damaged/corrupted
Go to one of those high street repair shops. They fixed mine for 80 pounds.
The tech tried with his Huawei flashing box but he couldn't detect the phone...
Did your device got unbriked?
No i bought one with the screen broken and i swapped thé motherboards, but the other is still bricked
Hello,
At one point this tablet was working just fine. It sat for a while and now it boot loops. Shows the amazon logo and auto restarts.
I can hold the proper volume up or down key and it says "Recovery Mode" on the bottom left but never enters into it.
Oddly enough I wasn't screwing around trying to do something I shouldn't have, but for the life of me I can't figure out what the deal is. Have anything I can try to possibly recover it? or is it straight to the bin.
Thank you in advance.
Take care,
Try fastboot boot recovery.img with the help of PC, if it boots format data and install rom.
Shiva Kumar A said:
Try fastboot boot recovery.img with the help of PC, if it boots format data and install rom.
Click to expand...
Click to collapse
Yeah good idea I'll report back .. I mean I can't break it anymore heh. I'm going to blame gamma rays coming down from from space and flipping a single bit in my 6 year old tablet............... causing it to boot loop.
So thinking out
Shiva Kumar A said:
Try fastboot boot recovery.img with the help of PC, if it boots format data and install rom.
Click to expand...
Click to collapse
So thinking out loud.
How do I get the tablet in a spot to accept a fastboot via USB?
It doesn't start up correctly to booted android. It doesn't enter TWRP... it seems as if I am stuck right?
likwidchz said:
So thinking out
So thinking out loud.
How do I get the tablet in a spot to accept a fastboot via USB?
It doesn't start up correctly to booted android. It doesn't enter TWRP... it seems as if I am stuck right?
Click to expand...
Click to collapse
What's happening when you try to boot into fastboot mode? After entering fastboot mode in cmd "fastboot boot twrp.img" "(drag and drop twrp file after boot )" it'll boot into twrp.
Shiva Kumar A said:
What's happening when you try to boot into fastboot mode? After entering fastboot mode in cmd "fastboot boot twrp.img" "(drag and drop twrp file after boot )" it'll boot into twrp.
Click to expand...
Click to collapse
You will have to explain how I would boot it into fastboot mode if
1 The tablet doesn't fully boot up past the amazon logo.
2 I cant even enter TWRP.
What am I missing?
Thank you and cheers!
When the device is fully shutdown press volume down + power.or maybe volume up check your device's combination key
Shiva Kumar A said:
When the device is fully shutdown press volume down + power.or maybe volume up check your device's combination key
Click to expand...
Click to collapse
Right then what? I'm missing something here.
likwidchz said:
Right then what? I'm missing something here.
Click to expand...
Click to collapse
I can't understand you what you trying to ask?
Shiva Kumar A said:
I can't understand you what you trying to ask?
Click to expand...
Click to collapse
Hello apologies,
I'll try and be as verbose as possible this time
This executes
[email protected]:/usr/src/giza# ./boot-fastboot.sh
[2023-02-08 12:26:26.386801] Waiting for preloader
[2023-02-08 12:26:50.335150] Found port = /dev/ttyACM0
[2023-02-08 12:26:50.365886] Handshake
[2023-02-08 12:26:50.386040] Preloader ready, sending FACTFACT
*Holding the left volume button + power button for some time.
[email protected]:/usr/src/giza# fastboot flash recovery bin/recovery.img
< waiting for any device >
Ive had this execute once, but when it does it looks like it wiped out TWRP as I cant get the small text to appear on the bottom left hand corner of the tablet while it does a boot holding power and the volume button.
So I'm not quite sure what I can do now.
Is there a method to flash TWRP with fastboot? or is that what the recovery is?
Could you provide a detailed list of items to try out and some high level instructions.
I've been thumbing through https://forum.xda-developers.com/t/unlock-root-twrp-unbrick-fire-hd-8-2016-giza.4303443/ this guide, but realize I'm not sure which step I need to start from, so I have bene trying a bunch of things and kind of stumped.
Thank you Shiva,
likwidchz said:
Right then what? I'm missing something here.
Click to expand...
Click to collapse
Bootloops are definitely a hassle sometimes. On your device your can either play the button game , watching the device closely and holding the the right button combo when the device goes black in hope that the device will boot into recovery or fastboot when it starts the bootloop again. The easiest thing for me to do sometimes is wait for the battery to drain completely dead then plug the device into the computer while holding the button combination to enter fastboot or recovery. The crappy part is waiting for the battery to drain. I did do a google and learned that Giza uses vol down button and pwr button to enter recovery. But with a dead battery it's likely one will only need to hold vol down button while plugging in the device. If it's in a bootloop it's probably not necessary to hold power button as well, just need to hold the vol down button at the time. I will say with a fair amount of confidence that the device is not a loss cause. Good luck, hope you get it working.
jonpjingleheimler said:
Bootloops are definitely a hassle sometimes. On your device your can either play the button game , watching the device closely and holding the the right button combo when the device goes black in hope that the device will boot into recovery or fastboot when it starts the bootloop again. The easiest thing for me to do sometimes is wait for the battery to drain completely dead then plug the device into the computer while holding the button combination to enter fastboot or recovery. The crappy part is waiting for the battery to drain. I did do a google and learned that Giza uses vol down button and pwr button to enter recovery. But with a dead battery it's likely one will only need to hold vol down button while plugging in the device. If it's in a bootloop it's probably not necessary to hold power button as well, just need to hold the vol down button at the time. I will say with a fair amount of confidence that the device is not a loss cause. Good luck, hope you get it working.
Click to expand...
Click to collapse
I had a weird assumption that I had to wait for the battery to drain. Its just weird this thing happened when it was working just fine.. usually I know when I screw something up pretty good.
I'm more curious on what command I need to be running and constantly retry to load up TWRP via fastboot.
Thanks!
likwidchz said:
I had a weird assumption that I had to wait for the battery to drain. Its just weird this thing happened when it was working just fine.. usually I know when I screw something up pretty good.
I'm more curious on what command I need to be running and constantly retry to load up TWRP via fastboot.
Thanks!
Click to expand...
Click to collapse
From what you have described issuing any command from a computer to the device wouldn't be possible as the device is bootlooping. I could not find any info on button combination to enter fastboot only recovery. from recovery there is a reboot to bootloader or fastboot option. that is your best bet. I have messed with at least a few different kindles in my time but there is always someone out there that has done more and may have another option they can add.
likwidchz said:
Hello apologies,
I'll try and be as verbose as possible this time
This executes
[email protected]:/usr/src/giza# ./boot-fastboot.sh
[2023-02-08 12:26:26.386801] Waiting for preloader
[2023-02-08 12:26:50.335150] Found port = /dev/ttyACM0
[2023-02-08 12:26:50.365886] Handshake
[2023-02-08 12:26:50.386040] Preloader ready, sending FACTFACT
*Holding the left volume button + power button for some time.
[email protected]:/usr/src/giza# fastboot flash recovery bin/recovery.img
< waiting for any device >
Ive had this execute once, but when it does it looks like it wiped out TWRP as I cant get the small text to appear on the bottom left hand corner of the tablet while it does a boot holding power and the volume button.
So I'm not quite sure what I can do now.
Is there a method to flash TWRP with fastboot? or is that what the recovery is?
Could you provide a detailed list of items to try out and some high level instructions.
I've been thumbing through https://forum.xda-developers.com/t/unlock-root-twrp-unbrick-fire-hd-8-2016-giza.4303443/ this guide, but realize I'm not sure which step I need to start from, so I have bene trying a bunch of things and kind of stumped.
Thank you Shiva,
Click to expand...
Click to collapse
Message me on telegram brother @HeyShiva
Shiva Kumar A said:
Message me on telegram brother @HeyShiva
Click to expand...
Click to collapse
Whats wrong with this forum?
likwidchz said:
Whats wrong with this forum?
Click to expand...
Click to collapse
Nothing, I can guide you there flawlessly. If you concerned about privacy no problem.
Shiva Kumar A said:
Nothing, I can guide you there flawlessly. If you concerned about privacy no problem.
Click to expand...
Click to collapse
I don't think you are the best person to guide on this one. You don't even seem to know what an Amazon tablet is, considering you suggested to fastboot boot when that cmd was patched back then in 2015.
@likwidchz If you're able to access fastboot thru boot-fastboot, erase preloader with fastboot erase boot0, reboot and run bootrom-step.sh again.
Rortiz2 said:
I don't think you are the best person to guide on this one. You don't even seem to know what an Amazon tablet is, considering you suggested to fastboot boot when that cmd was patched back then in 2015.
@likwidchz If you're able to access fastboot thru boot-fastboot, erase preloader with fastboot erase boot0, reboot and run bootrom-step.sh again.
Click to expand...
Click to collapse
Yes I don't know about this tablet, I thought it was just like any other tablets sorry
Rortiz2 said:
I don't think you are the best person to guide on this one. You don't even seem to know what an Amazon tablet is, considering you suggested to fastboot boot when that cmd was patched back then in 2015.
@likwidchz If you're able to access fastboot thru boot-fastboot, erase preloader with fastboot erase boot0, reboot and run bootrom-step.sh again.
Click to expand...
Click to collapse
Would you happen to be on IRC or some discord group?
I have done about ~7 of these tablets Suez/Giza but when something goes south, its not clear to me which step I need to start back from. Having a side conversation might help. In the end of the tablet is done, I am not going to be too broken up about it. But it's not a lost cause yet.
Thank you for the assistance! Much love.
--Take care.
likwidchz said:
Would you happen to be on IRC or some discord group?
I have done about ~7 of these tablets Suez/Giza but when something goes south, its not clear to me which step I need to start back from. Having a side conversation might help. In the end of the tablet is done, I am not going to be too broken up about it. But it's not a lost cause yet.
Thank you for the assistance! Much love.
--Take care.
Click to expand...
Click to collapse
I don't use IRC, but I do have Discord (R0rt1z2#3415).