Hello,
At one point this tablet was working just fine. It sat for a while and now it boot loops. Shows the amazon logo and auto restarts.
I can hold the proper volume up or down key and it says "Recovery Mode" on the bottom left but never enters into it.
Oddly enough I wasn't screwing around trying to do something I shouldn't have, but for the life of me I can't figure out what the deal is. Have anything I can try to possibly recover it? or is it straight to the bin.
Thank you in advance.
Take care,
Try fastboot boot recovery.img with the help of PC, if it boots format data and install rom.
Shiva Kumar A said:
Try fastboot boot recovery.img with the help of PC, if it boots format data and install rom.
Click to expand...
Click to collapse
Yeah good idea I'll report back .. I mean I can't break it anymore heh. I'm going to blame gamma rays coming down from from space and flipping a single bit in my 6 year old tablet............... causing it to boot loop.
So thinking out
Shiva Kumar A said:
Try fastboot boot recovery.img with the help of PC, if it boots format data and install rom.
Click to expand...
Click to collapse
So thinking out loud.
How do I get the tablet in a spot to accept a fastboot via USB?
It doesn't start up correctly to booted android. It doesn't enter TWRP... it seems as if I am stuck right?
likwidchz said:
So thinking out
So thinking out loud.
How do I get the tablet in a spot to accept a fastboot via USB?
It doesn't start up correctly to booted android. It doesn't enter TWRP... it seems as if I am stuck right?
Click to expand...
Click to collapse
What's happening when you try to boot into fastboot mode? After entering fastboot mode in cmd "fastboot boot twrp.img" "(drag and drop twrp file after boot )" it'll boot into twrp.
Shiva Kumar A said:
What's happening when you try to boot into fastboot mode? After entering fastboot mode in cmd "fastboot boot twrp.img" "(drag and drop twrp file after boot )" it'll boot into twrp.
Click to expand...
Click to collapse
You will have to explain how I would boot it into fastboot mode if
1 The tablet doesn't fully boot up past the amazon logo.
2 I cant even enter TWRP.
What am I missing?
Thank you and cheers!
When the device is fully shutdown press volume down + power.or maybe volume up check your device's combination key
Shiva Kumar A said:
When the device is fully shutdown press volume down + power.or maybe volume up check your device's combination key
Click to expand...
Click to collapse
Right then what? I'm missing something here.
likwidchz said:
Right then what? I'm missing something here.
Click to expand...
Click to collapse
I can't understand you what you trying to ask?
Shiva Kumar A said:
I can't understand you what you trying to ask?
Click to expand...
Click to collapse
Hello apologies,
I'll try and be as verbose as possible this time
This executes
[email protected]:/usr/src/giza# ./boot-fastboot.sh
[2023-02-08 12:26:26.386801] Waiting for preloader
[2023-02-08 12:26:50.335150] Found port = /dev/ttyACM0
[2023-02-08 12:26:50.365886] Handshake
[2023-02-08 12:26:50.386040] Preloader ready, sending FACTFACT
*Holding the left volume button + power button for some time.
[email protected]:/usr/src/giza# fastboot flash recovery bin/recovery.img
< waiting for any device >
Ive had this execute once, but when it does it looks like it wiped out TWRP as I cant get the small text to appear on the bottom left hand corner of the tablet while it does a boot holding power and the volume button.
So I'm not quite sure what I can do now.
Is there a method to flash TWRP with fastboot? or is that what the recovery is?
Could you provide a detailed list of items to try out and some high level instructions.
I've been thumbing through https://forum.xda-developers.com/t/unlock-root-twrp-unbrick-fire-hd-8-2016-giza.4303443/ this guide, but realize I'm not sure which step I need to start from, so I have bene trying a bunch of things and kind of stumped.
Thank you Shiva,
likwidchz said:
Right then what? I'm missing something here.
Click to expand...
Click to collapse
Bootloops are definitely a hassle sometimes. On your device your can either play the button game , watching the device closely and holding the the right button combo when the device goes black in hope that the device will boot into recovery or fastboot when it starts the bootloop again. The easiest thing for me to do sometimes is wait for the battery to drain completely dead then plug the device into the computer while holding the button combination to enter fastboot or recovery. The crappy part is waiting for the battery to drain. I did do a google and learned that Giza uses vol down button and pwr button to enter recovery. But with a dead battery it's likely one will only need to hold vol down button while plugging in the device. If it's in a bootloop it's probably not necessary to hold power button as well, just need to hold the vol down button at the time. I will say with a fair amount of confidence that the device is not a loss cause. Good luck, hope you get it working.
jonpjingleheimler said:
Bootloops are definitely a hassle sometimes. On your device your can either play the button game , watching the device closely and holding the the right button combo when the device goes black in hope that the device will boot into recovery or fastboot when it starts the bootloop again. The easiest thing for me to do sometimes is wait for the battery to drain completely dead then plug the device into the computer while holding the button combination to enter fastboot or recovery. The crappy part is waiting for the battery to drain. I did do a google and learned that Giza uses vol down button and pwr button to enter recovery. But with a dead battery it's likely one will only need to hold vol down button while plugging in the device. If it's in a bootloop it's probably not necessary to hold power button as well, just need to hold the vol down button at the time. I will say with a fair amount of confidence that the device is not a loss cause. Good luck, hope you get it working.
Click to expand...
Click to collapse
I had a weird assumption that I had to wait for the battery to drain. Its just weird this thing happened when it was working just fine.. usually I know when I screw something up pretty good.
I'm more curious on what command I need to be running and constantly retry to load up TWRP via fastboot.
Thanks!
likwidchz said:
I had a weird assumption that I had to wait for the battery to drain. Its just weird this thing happened when it was working just fine.. usually I know when I screw something up pretty good.
I'm more curious on what command I need to be running and constantly retry to load up TWRP via fastboot.
Thanks!
Click to expand...
Click to collapse
From what you have described issuing any command from a computer to the device wouldn't be possible as the device is bootlooping. I could not find any info on button combination to enter fastboot only recovery. from recovery there is a reboot to bootloader or fastboot option. that is your best bet. I have messed with at least a few different kindles in my time but there is always someone out there that has done more and may have another option they can add.
likwidchz said:
Hello apologies,
I'll try and be as verbose as possible this time
This executes
[email protected]:/usr/src/giza# ./boot-fastboot.sh
[2023-02-08 12:26:26.386801] Waiting for preloader
[2023-02-08 12:26:50.335150] Found port = /dev/ttyACM0
[2023-02-08 12:26:50.365886] Handshake
[2023-02-08 12:26:50.386040] Preloader ready, sending FACTFACT
*Holding the left volume button + power button for some time.
[email protected]:/usr/src/giza# fastboot flash recovery bin/recovery.img
< waiting for any device >
Ive had this execute once, but when it does it looks like it wiped out TWRP as I cant get the small text to appear on the bottom left hand corner of the tablet while it does a boot holding power and the volume button.
So I'm not quite sure what I can do now.
Is there a method to flash TWRP with fastboot? or is that what the recovery is?
Could you provide a detailed list of items to try out and some high level instructions.
I've been thumbing through https://forum.xda-developers.com/t/unlock-root-twrp-unbrick-fire-hd-8-2016-giza.4303443/ this guide, but realize I'm not sure which step I need to start from, so I have bene trying a bunch of things and kind of stumped.
Thank you Shiva,
Click to expand...
Click to collapse
Message me on telegram brother @HeyShiva
Shiva Kumar A said:
Message me on telegram brother @HeyShiva
Click to expand...
Click to collapse
Whats wrong with this forum?
likwidchz said:
Whats wrong with this forum?
Click to expand...
Click to collapse
Nothing, I can guide you there flawlessly. If you concerned about privacy no problem.
Shiva Kumar A said:
Nothing, I can guide you there flawlessly. If you concerned about privacy no problem.
Click to expand...
Click to collapse
I don't think you are the best person to guide on this one. You don't even seem to know what an Amazon tablet is, considering you suggested to fastboot boot when that cmd was patched back then in 2015.
@likwidchz If you're able to access fastboot thru boot-fastboot, erase preloader with fastboot erase boot0, reboot and run bootrom-step.sh again.
Rortiz2 said:
I don't think you are the best person to guide on this one. You don't even seem to know what an Amazon tablet is, considering you suggested to fastboot boot when that cmd was patched back then in 2015.
@likwidchz If you're able to access fastboot thru boot-fastboot, erase preloader with fastboot erase boot0, reboot and run bootrom-step.sh again.
Click to expand...
Click to collapse
Yes I don't know about this tablet, I thought it was just like any other tablets sorry
Rortiz2 said:
I don't think you are the best person to guide on this one. You don't even seem to know what an Amazon tablet is, considering you suggested to fastboot boot when that cmd was patched back then in 2015.
@likwidchz If you're able to access fastboot thru boot-fastboot, erase preloader with fastboot erase boot0, reboot and run bootrom-step.sh again.
Click to expand...
Click to collapse
Would you happen to be on IRC or some discord group?
I have done about ~7 of these tablets Suez/Giza but when something goes south, its not clear to me which step I need to start back from. Having a side conversation might help. In the end of the tablet is done, I am not going to be too broken up about it. But it's not a lost cause yet.
Thank you for the assistance! Much love.
--Take care.
likwidchz said:
Would you happen to be on IRC or some discord group?
I have done about ~7 of these tablets Suez/Giza but when something goes south, its not clear to me which step I need to start back from. Having a side conversation might help. In the end of the tablet is done, I am not going to be too broken up about it. But it's not a lost cause yet.
Thank you for the assistance! Much love.
--Take care.
Click to expand...
Click to collapse
I don't use IRC, but I do have Discord (R0rt1z2#3415).
Related
I hope I can save it but after 4 hours of trying and reading I can't seem to do it.
I was running an unlocked tf300 with cleanrom. I wanted to update to the newest version of cleanrom and have my tablet on that and ready for school for next term. I downloaded cleanrom on laptop and put it on my micro sd. Went and grabbed the tablet and tried using rom manager to install from sd and backup the os that was on it. Didn't work. So booted into the fastboot spot (vol down and power) and decided i should wipe data since i was there. Went over to that and pushed vol up (once). Let it sit for like 45 minutes and was still on the same screen. Thought to myself well it must be done. Shut off the tablet to restart it.
This is where the problem came up. Now i'm stuck on asus logo. The VD+P doesn't do anything but reboot into the asus logo. The VU+P will put it into a black screen and windows sees it as Asus transformer Prime APX interface. But adb can't see the device. Just device manager. typing fastboot -i 0x0b05 thing just says <waiting for device>
Every post i've read seems to tell people to just push VD+P but if i could do that and get to recovery i wouldn't be doing this. I can't put a blob file into the root sd of the tablet because I can't see the tablet.
Any help would be greatly appreciated.
Maybe this link can help.
http://forum.xda-developers.com/showthread.php?t=2034866
Device manager already sees it as transformer prime apx thing though. So i assume by getting it into APX mode doing the VU+P method it is in apx? or is that not mean it's actually in apx?
bigworm82 said:
Device manager already sees it as transformer prime apx thing though. So i assume by getting it into APX mode doing the VU+P method it is in apx? or is that not mean it's actually in apx?
Click to expand...
Click to collapse
Apx mode is not going to do you any good. The previous link also provides info on blootloader " recovery " mode.
Try the universal naked drivers from this link and try fastboot again.
http://forum.xda-developers.com/showthread.php?t=1766220
If that does not work leave off ' -i 0x0b05 ' in fastboot -i 0x0b05 command and try again.
tobdaryl said:
Apx mode is not going to do you any good. The previous link also provides info on blootloader " recovery " mode.
Try the universal naked drivers from this link and try fastboot again.
http://forum.xda-developers.com/showthread.php?t=1766220
If that does not work leave off ' -i 0x0b05 ' in fastboot -i 0x0b05 command and try again.
Click to expand...
Click to collapse
Already installed the naked drivers and that's when the computer recognized it in the device manager portion as the asus prime apx interface thing. It still just says <waiting for device> in everything i try on fastboot.
bigworm82 said:
Already installed the naked drivers and that's when the computer recognized it in the device manager portion as the asus prime apx interface thing. It still just says <waiting for device> in everything i try on fastboot.
Click to expand...
Click to collapse
Are you in fastboot mode or apx when you give the commands?
tobdaryl said:
Are you in fastboot mode or apx when you give the commands?
Click to expand...
Click to collapse
i just go into cmd and go to the folder i put fastboot and all in and type fastboot..... so on.. what should i do?
bigworm82 said:
i just go into cmd and go to the folder i put fastboot and all in and type fastboot..... so on.. what should i do?
Click to expand...
Click to collapse
I know you previously said you couldn't get into recovery-bootloader menu but that is what we have to accomplish. Apx mode on this unit is only good if you previously installed nvflash and had all of the proper backup files.
The first link I provided provides 9 ways to get into bootloader menu and from there either fastboot mode (usb symbol) or recovery (RCK). I know some may not work but we only need one.
tobdaryl said:
I know you previously said you couldn't get into recovery-bootloader menu but that is what we have to accomplish. Apx mode on this unit is only good if you previously installed nvflash and had all of the proper backup files.
The first link I provided provides 9 ways to get into bootloader menu and from there either fastboot mode (usb symbol) or recovery (RCK). I know some may not work but we only need one.
Click to expand...
Click to collapse
I'm confused the first link is to get into APX mode from how i read it on the page. Am i wrong? I have no issues getting into this mode.
bigworm82 said:
I'm confused the first link is to get into APX mode from how i read it on the page. Am i wrong? I have no issues getting into this mode.
Click to expand...
Click to collapse
apx or bootloader menu-recovery.
To use this guide to enter the bootloader menu just use volume down everywhere it says volume up. Everything else is the same.
4. with unit powered on hold volume down and press reset with paperclip - (don't press hard) reset is located about 25mm or 1in below the sdcard
try this one.
tobdaryl said:
apx or bootloader menu-recovery.
4. with unit powered on hold volume down and press reset with paperclip - (don't press hard)
reset is located about 25mm or 1in below the sdcard
try this one.
To use this guide to enter the bootloader menu just use volume down everywhere it says volume up. Everything else is the same.
Click to expand...
Click to collapse
nope just back to asus logo
bigworm82 said:
nope just back to asus logo
Click to expand...
Click to collapse
use cmd(terminal) in same directory as fastboot
adb reboot then immediately hold volume down
if no help then
adb reboot bootloader - no need for volume on this one
tobdaryl said:
use cmd(terminal) in same directory as fastboot
adb reboot then immediately hold volume down
if no help then
adb reboot bootloader - no need for volume on this one
Click to expand...
Click to collapse
Device not found.
bigworm82 said:
Device not found.
Click to expand...
Click to collapse
Force power off by holding power a few seconds.
Plug power cord into tab with the other end of the power cord not plugged into anything. Hold volume down and plug other end of power cord into pc. This done without pressing power again after it is powered off. Easier to do than describe.
tobdaryl said:
Force power off by holding power a few seconds.
Plug power cord into tab with the other end of the power cord not plugged into anything. Hold volume down and plug other end of power cord into pc. This done without pressing power again after it is powered off. Easier to do than describe.
Click to expand...
Click to collapse
The Problem lies in holding the volume down button. No matter how i turn it on. either plugging it in while holding power down, reset button, letting it die and then plugging it in and turning it on....it just goes into the asus logo screen .
bigworm82 said:
The Problem lies in holding the volume down button. No matter how i turn it on. either plugging it in while holding power down, reset button, letting it die and then plugging it in and turning it on....it just goes into the asus logo screen .
Click to expand...
Click to collapse
I'm sorry, I did understand that from the beginning but the only things that can save you is get into that menu or recovery or your tab accepts a fastboot or adb command. That is the reason you keep getting pushed into that direction.
My best guesses are out. Sometimes redoing something you have already done twice works.
My experience and all I have read rom manager has issues on this tab. Also many who wiped data from the bootloader- recovery menu reach this same point when they reboot.
Some have recovered by just doing each thing again and again and suddenly something works.
Yeah i fear i'm just going to have to call ASUS . sad panda. i keep trying different methods of doing the VD+P method but it just won't get into recovery.
bigworm82 said:
Yeah i fear i'm just going to have to call ASUS . sad panda. i keep trying different methods of doing the VD+P method but it just won't get into recovery.
Click to expand...
Click to collapse
I'm sorry but I am afraid you are correct. If unable to use adb, fastboot, or get into recovery there aren't any other options. Sorry if I pushed more than I should but I wanted to see a more positive result than calling Asus.
Good Luck!
tobdaryl said:
I'm sorry but I am afraid you are correct. If unable to use adb, fastboot, or get into recovery there aren't any other options. Sorry if I pushed more than I should but I wanted to see a more positive result than calling Asus.
Good Luck!
Click to expand...
Click to collapse
I appreciate the attempts though . I really didn't want to have to call them lol.
bigworm82 said:
I appreciate the attempts though . I really didn't want to have to call them lol.
Click to expand...
Click to collapse
If you explain you were having issues with your tab and used wipe data hoping to correct the problem. Now when you turn on it just stays on the asus logo maybe they will repair it without cost.
If you go into detail you probably won't get lucky.
Hey Guys,
so ive been messing around with this little phone and think i might have managed a hard brick. Any thoughts or advice would be appreciated.
was attempting to relock the bootloader and flashing my local 4.4.2 rom and on the command prompt when i reached flash system.img parsechunk lines, they failed. as it said permission denied.
Tried to continue with no luck. Restarted my phone and now cant get into recovery and no boot, the only screen i see is the white warning bootloader locked screen, get a vibrate and then it turns off again. Any ways to flash without Recovery or Fastboot or am i completely out of luck?
Sorry im new to motorolas, had no problems messing around with my old SGS2
Thanks in advance everybody.
did you try this ?
http://forum.xda-developers.com/showthread.php?t=2542219
the only problem is cant get the phone into fastboot mode. Thanks for the input though!
mackb44 said:
the only problem is cant get the phone into fastboot mode. Thanks for the input though!
Click to expand...
Click to collapse
I've been in a few situations where I thought I had 'bricked' my phone. One way that worked (sometimes) was to long press the POWER button for a very long time(minutes), then release and (sometimes) it would reboot.
The usual way to the fastboot menu is - power off (which yours probably is), then hold vol. down and press power button for 5/10 seconds and release both.
Good luck!
jamsh said:
I've been in a few situations where I thought I had 'bricked' my phone. One way that worked (sometimes) was to long press the POWER button for a very long time(minutes), then release and (sometimes) it would reboot.
The usual way to the fastboot menu is - power off (which yours probably is), then hold vol. down and press power button for 5/10 seconds and release both.
Good luck!
Click to expand...
Click to collapse
Yea tried both options, no luck!
The only screen i can get now is the bootloader unlocked screen or the white charging screen when plugged in. After that the screen will stay on but is completely black.
Success I can get into fastboot now!!!! not sure why i could not before
mackb44 said:
Success I can get into fastboot now!!!! not sure why i could not before
Click to expand...
Click to collapse
yes i had something similar,bootlocker warning and then the screen going dark. i just ended up using fastboot and flashing a stock rom and went from there.
glad your panic is over .
quizmaniac said:
yes i had something similar,bootlocker warning and then the screen going dark. i just ended up using fastboot and flashing a stock rom and went from there.
glad your panic is over .
Click to expand...
Click to collapse
Yea thanks buddy!
just have to wait for it to charge up before it will let me flash using adb, oddly its only showing that it is charging while plugged into usb and not the wall socket
Hi everyone im stuck on the resurection of my device (moto g 2013 8GB updated to 5.1 with [5.1 GPE 1 click] from This forum.
I've tried everything or almost for now, cant get it out of that loop.
*Battery pulling.
*hard buttons combinations.
*fastboot and ADB. (not in fastboot mode so.. And as i did flash de 1click before the loop USB Dbgn isn't enabled)
*i think i've tried every toolkit on this forum.
*Raped google search for over a week trying every posible method-
*Only thing left is to take it to church for a blessing. but im not a believer D:
ADD: i've rooted with a "boot.img" from this forum i think it was a 2015 file.
before this i had not 1 issue with the phone. just unlockd the bootloader a few days ago and updated to 5.1 from 5.0.2 becouse of a wifi issue (unknow mac adress) i had to reboot it like 10 times until it appeared again (original mac adress from device, still wrote it down i have it somewhere.)
I think this would be my first post on this forum and it took me over a week to do it becouse this (asking you-comunity) is my last resource.
PS: i had it going betwen 5.0.2 and 5.1 like 4 times to try solving the wifi issue.. only thing it got me was the "line" on the screen like if it where a problem with vertical sync. (i think you are all very familiar with that issue after downgrading the kernel i think.)
the phone just turns it self on everytime. (everytime)
i was able to boot into recovery before the last flash touching the place were the hardware volume button goes (with a neddle) untill it didnt workd anymore and i send it to a store to repair the volume rockers. still no recovery or bootloader boot.
my pc (laptop with 7-32bit recognices it as xt1032. and the one with xp as MTP.)
I've installed every posible thing that i found to bring it back to life even the android sdk full every pkg from 5.0.2 to 5.1 and extras, Motorola drivers and ADB. tried online searching automated from windows and listing it from a folder with the google one. tried adding the hardware manualy and have every ADB thing that i found on device mng but everyone is wit a yellow triangle. (No USB Debuging enabled so why bother anymore.)
I think that's about it.
You seem to be making things massively over-complicated.
Flash latest TWRP from here: http://forum.xda-developers.com/moto-g/development/recovery-twrp-2-8-2-0-touch-recovery-t2980621
Example fastboot command:
fastboot flash recovery twrp.img
If you cannot enter TWRP, use ONLY this fastboot command:
fastboot erase userdata
Via TWRP, flash latest GPE Optimized ROM from here: http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-lollipop-rom-t3017510
i m sorry for my english, isnt my native lang. And for making it over complicated.
i cant enter fastboot mode or give any order to the phone trough fastboot on a console.
I have installed a TWRP touch, just cant acces it. dont know if it is the hardware button (Vol -) or what.
so it dosnt show up on fastboot devices nor adb devices.
am i not understanding something ?
Thanks for replying and taking the time to help!
Enter fastboot mode by turning on phone while holding Volume Down.
lost101 said:
Enter fastboot mode by turning on phone while holding Volume Down.
Click to expand...
Click to collapse
tried again just in case. No luck, wont boot into recovery or bootloader mode. vol (-) or power and vol (-)
it just "tries" to boot up normaly and gets stuck on "android starting" untill "initializing apps" 4 colours flying and reboots again.
dieguitwow1 said:
tried again just in case. No luck, wont boot into recovery or bootloader mode. vol (-) or power and vol (-)
it just "tries" to boot up normaly and gets stuck on "android starting" untill "initializing apps" 4 colours flying and reboots again.
Click to expand...
Click to collapse
If the volume rocker is not broken, then you should be able to enter fastboot mode. Hold power button until phone turns off completely.
If the volume rocker is not broken, then you should be able to enter fastboot mode. Hold power button until phone turns off completely.
Click to expand...
Click to collapse
did that, tried pulling the battery off and holding the keys (down and power or just vol down) and starting it. no way it goes into bootloader or recovery. When i do any of those things the phone just powers back up it self and boots into system or tries to, and get stuck in bootloop.
Im gonna try a gtag cable or something like that tomorrow from a friend. would it work to send it to bootloader or recovr?
dieguitwow1 said:
did that, tried pulling the battery off and holding the keys (down and power or just vol down) and starting it. no way it goes into bootloader or recovery. When i do any of those things the phone just powers back up it self and boots into system or tries to, and get stuck in bootloop.
Im gonna try a gtag cable or something like that tomorrow from a friend. would it work to send it to bootloader or recovr?
Click to expand...
Click to collapse
You said you had the volume rocker repaired - but it seems at least, vol down is not working. I have no experience with jtag kits or commands.
lost101 said:
You seem to be making things massively over-complicated.
Flash latest TWRP from here: http://forum.xda-developers.com/moto-g/development/recovery-twrp-2-8-2-0-touch-recovery-t2980621
Example fastboot command:
fastboot flash recovery twrp.img
If you cannot enter TWRP, use ONLY this fastboot command:
fastboot erase userdata
Via TWRP, flash latest GPE Optimized ROM from here: http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-lollipop-rom-t3017510
Click to expand...
Click to collapse
lost101 said:
Enter fastboot mode by turning on phone while holding Volume Down.
Click to expand...
Click to collapse
lost101 said:
You said you had the volume rocker repaired - but it seems at least, vol down is not working. I have no experience with jtag kits or commands.
Click to expand...
Click to collapse
i think it's not repaired properly, or the last time i flashed it fastboot might have send a command like "fastboot normalboot" or something like that. Would that be stoping me from entering recovery mode or fastboot?
dieguitwow1 said:
i think it's not repaired properly, or the last time i flashed it fastboot might have send a command like "fastboot normalboot" or something like that. Would that be stoping me from entering recovery mode or fastboot?
Click to expand...
Click to collapse
If you power phone off completely, then no commands are remembered. The button is broken.
lost101 said:
If you power phone off completely, then no commands are remembered. The button is broken.
Click to expand...
Click to collapse
Thanks! so, what should i do now? is there any way to fix it or bypass it ?
i was "touching" the button with a niddle until it stoped working is there a fix for it? :fingers-crossed:
dieguitwow1 said:
Thanks! so, what should i do now? is there any way to fix it or bypass it ?
i was "touching" the button with a needle until it stopped working is there a fix for it? :fingers-crossed:
Click to expand...
Click to collapse
Sorry, I can't help you with that. If you know someone good with a soldering iron, maybe they can fix it - otherwise, try another repair shop.
its still seen by my PC with XP. As xt1032 on the bootloop can i do something ? moto device mngr starts with de Moto logo on the sys tray..
dieguitwow1 said:
its still seen by my PC with XP. As xt1032 on the bootloop can i do something ? moto device mngr starts with de Moto logo on the sys tray..
Click to expand...
Click to collapse
adb reboot bootloader
lost101 said:
adb reboot bootloader
Click to expand...
Click to collapse
even if "USB Debuging" isn't enabled?
Edit: Result= [ Error: device ´<null>´ not found ]
dieguitwow1 said:
even if "USB Debuging" isn't enabled?
Edit: Result= [ Error: device ´<null>´ not found ]
Click to expand...
Click to collapse
Yes, USB Debugging would need to be enabled.
lost101 said:
Yes, USB Debugging would need to be enabled.
Click to expand...
Click to collapse
so, apart from taking it to repair again for the button, what can i do?:fingers-crossed:
dieguitwow1 said:
so, apart from taking it to repair again for the button, what can i do?:fingers-crossed:
Click to expand...
Click to collapse
I am not aware of any other options.
i managed to recover the phone it works normaly but screen goes off and on all the time, every 5 sec. Except on Bootloader Mode.
dieguitwow1 said:
i managed to recover the phone it works normaly but screen goes off and on all the time, every 5 sec. Except on Bootloader Mode.
Click to expand...
Click to collapse
What has changed? Did you get the vol button fixed?
Hi,
I have a problem with my Nexus 5, it bootloop on the Google Logo
I try to put a little piece of paper behind the power button and also to click on the power button a lot of times during the boot but it still stuck..
What can I do to try fix it ?
Thanks in advance
is this the kind of bootloop where it loops because of a stuck power button or is it a software based bootloop?
matgras said:
is this the kind of bootloop where it loops because of a stuck power button or is it a software based bootloop?
Click to expand...
Click to collapse
Same as this : https://www.youtube.com/watch?v=jzj73qYg5HA
I take the motherboard off, try to connect just the battery and the screen but same problem..
nathan30 said:
Same as this : https://www.youtube.com/watch?v=jzj73qYg5HA
I take the motherboard off, try to connect just the battery and the screen but same problem..
Click to expand...
Click to collapse
that happened to my old ativ s as well, it was due to a broken power button (electrically stuck, not mechanically) the only solution for me was to solder a new power button on it. But I just used it as an excuse to get a new phone.
matgras said:
that happened to my old ativ s as well, it was due to a broken power button (electrically stuck, not mechanically) the only solution for me was to solder a new power button on it. But I just used it as an excuse to get a new phone.
Click to expand...
Click to collapse
Did you try this solution or not ? To know if I can try to do it
nathan30 said:
Did you try this solution or not ? To know if I can try to do it
Click to expand...
Click to collapse
I haven't, it may be very hard depending on the phone model, I just removed it with pliers so I could boot it with a usb cable and I got all the data I needed from my phone.
Can you get your phone into recovery or fastboot mode?
matgras said:
I haven't, it may be very hard depending on the phone model, I just removed it with pliers so I could boot it with a usb cable and I got all the data I needed from my phone.
Can you get your phone into recovery or fastboot mode?
Click to expand...
Click to collapse
So I try to unsolder the power button and now the phone didn't bootloop anymore. Now I'm waiting the new power button I ordered to see.
And to answer your question, I was not able to reach fastboot or the recovery
nathan30 said:
So I try to unsolder the power button and now the phone didn't bootloop anymore. Now I'm waiting the new power button I ordered to see.
And to answer your question, I was not able to reach fastboot or the recovery
Click to expand...
Click to collapse
if you install gravitybox and xposed there should be an option to turn on the screen with the volume buttons (I'm not sure though, it might have been another module) so you could use that as a temporary solution.
matgras said:
if you install gravitybox and xposed there should be an option to turn on the screen with the volume buttons (I'm not sure though, it might have been another module) so you could use that as a temporary solution.
Click to expand...
Click to collapse
I can't have the phone booting, so I have to wait the new button ^^
nathan30 said:
I can't have the phone booting, so I have to wait the new button ^^
Click to expand...
Click to collapse
with phone turned off, (you can remove the battery and re plug it), hold the volume down button and connect it to the wall charger(do not use PC,it will trigger lg download mode), then you will be able to go to fastboot.
Once there you can:
fastboot reboot to boot to normal OS
fastboot boot twrp so you can install a rom or any other mod
opssemnik said:
with phone turned off, (you can remove the battery and re plug it), hold the volume down button and connect it to the wall charger(do not use PC,it will trigger lg download mode), then you will be able to go to fastboot.
Once there you can:
fastboot reboot to boot to normal OS
fastboot boot twrp so you can install a rom or any other mod
Click to expand...
Click to collapse
Oh I didn't know this tips. Thanks a lot I will try asap. But the lg download mode can't be a good solution to reinstall a rom with the computer?
nathan30 said:
Oh I didn't know this tips. Thanks a lot I will try asap. But the lg download mode can't be a good solution to reinstall a rom with the computer?
Click to expand...
Click to collapse
it locks the bootloader and fully wipes the userdata
here is the thread link
http://forum.xda-developers.com/goo...orial-how-to-flash-factory-images-lg-t2713833
opssemnik said:
it locks the bootloader and fully wipes the userdata
here is the thread link
http://forum.xda-developers.com/goo...orial-how-to-flash-factory-images-lg-t2713833
Click to expand...
Click to collapse
So I try to push volume down and connecting the charger. I reach the fastboot menu but I can't select "start" or something else because without power button I can't validate my choice..
nathan30 said:
So I try to push volume down and connecting the charger. I reach the fastboot menu but I can't select "start" or something else because without power button I can't validate my choice..
Click to expand...
Click to collapse
as i said, you need a computer once you reach fastboot mode, to send the commands.
fastboot reboot - to boot into normal OS
fastboot boot twrp - to boot twrp
opssemnik said:
as i said, you need a computer once you reach fastboot mode, to send the commands.
fastboot reboot - to boot into normal OS
fastboot boot twrp - to boot twrp
Click to expand...
Click to collapse
Oh i didn't understand, thanks a lot it's working
Now I'm just waiting my new power button
i had this **** sorry for swearing i thought its something with my ROM CM13 Nightly I tried the repair service they said that they changed the power button no data was deleted so its probably the button but some one had a guide how to get the phone out that **** using your PC and manual ADB commands ( No program command line only )
I need help with this issue
when this problem reached me it was a meter of replacing the power button itself (it's like stuck there) by the way my phone was still under warranty so they changed it for me
https://www.ifixit.com/Answers/View/208337/How+do+I+fix+a+Nexus+5+Power+Button+Issue
https://www.aliexpress.com/store/pr...821-NEW-Free-Shipping/629458_32289287372.html
https://www.aliexpress.com/popular/nexus-5-on-off-switch.html
If that helped you dont forget to press the thank you button
Hi everyone. I have an honor 6x emui 5, android 7 Nougat, and I unlocked the bootloader but I have a problem (I followed this guide) after running the command C:\ adb> adb reboot recovery, it says:
"Your device has been unlocked and can not be trusted.
To learn more, visit:
...
your device is booting now "
but it stays stuck on this screen and does not let me access the twrp.
Do you have a solution?
I looked around for something but there is nothing concrete and clear. Thanks a lot.
Luigi (i'm not Mario's brother)
Hi Luigi (ouch, thought it was Mario's bro :silly: ), once you flash TWRP through fastboot, you boot directly to it in way to don't let Huawei Recovery overwrite it immediately after?
To do this, as you finish to flash the image you'll need to boot to TWRP using hardware keys (at least that's what i did to make it works). When you're still in fastboot mode and TWRP is flashed, keep pressed power button and wait until your phone's display becomes black.
Be ready to hold down power button and Vol+ together as soon as you feel the phone vibrating while restarting (pay many attention to this step because it's the trickiest part - power button should be released while phone it's on black screen, but you'll for have to re-hold down power button again shortly after! Basically just hold the two keys and release them immediately as you see the Honor logo) and if everything went well, you'll finally be in TWRP.
Lemme know if you'll be able to win the game or if you need a Power-Up mushroom.
RedSkull23 said:
Hi Luigi (ouch, thought it was Mario's bro :silly: ), once you flash TWRP through fastboot, you boot directly to it in way to don't let Huawei Recovery overwrite it immediately after?
To do this, as you finish to flash the image you'll need to boot to TWRP using hardware keys (at least that's what i did to make it works). When you're still in fastboot mode and TWRP is flashed, keep pressed power button and wait until your phone's display becomes black.
Be ready to hold down power button and Vol+ together as soon as you feel the phone vibrating while restarting (pay many attention to this step because it's the trickiest part - power button should be released while phone it's on black screen, but you'll for have to re-hold down power button again shortly after! Basically just hold the two keys and release them immediately as you see the Honor logo) and if everything went well, you'll finally be in TWRP.
Lemme know if you'll be able to win the game or if you need a Power-Up mushroom.
Click to expand...
Click to collapse
but then this operation I have to execute it before or even after visualizing the screen that I have told you before?
The point is that the twrp does not flash ...:crying:
I tried several times to execute the sequence, and now it is stuck on the screen of the 3 options, ie it does not start anymore
he did not want to. How do I do now? I've tried any combination of buttons but it remains locked :crying:
Nvust said:
but then this operation I have to execute it before or even after visualizing the screen that I have told you before?
Click to expand...
Click to collapse
Immediately after that you've flashed TWRP and you get "success" message, when you're still on fastboot mode. Just type "fastboot reboot" and prepare to hold the keys once phone vibrates.
Nvust said:
The point is that the twrp does not flash ...:crying:
Click to expand...
Click to collapse
Telling me what issues you're facing could help more than this. What you mean with TWRP does not flash?
Nvust said:
I tried several times to execute the sequence, and now it is stuck on the screen of the 3 options, ie it does not start anymore
he did not want to. How do I do now? I've tried any combination of buttons but it remains locked :crying:
Click to expand...
Click to collapse
That's weird. But until I'll know more about the steps you did, helping becomes harder. Tell me something because just flashing stuff to recovery partition could not mess system that much, unless that you've flashed a wrong TWRP or the correct TWRP but in a wrong partition.
RedSkull23 said:
Immediately after that you've flashed TWRP and you get "success" message, when you're still on fastboot mode. Just type "fastboot reboot" and prepare to hold the keys once phone vibrates.
Telling me what issues you're facing could help more than this. What you mean with TWRP does not flash?
That's weird. But until I'll know more about the steps you did, helping becomes harder. Tell me something because just flashing stuff to recovery partition could not mess system that much, unless that you've flashed a wrong TWRP or the correct TWRP but in a wrong partition.
Click to expand...
Click to collapse
look here
after it don't make nothing