I am having a weird problem. I am on stock ATT with root. If i am talking to someone using my phone....if i put it on speaker and screen goes off...I cannot make the screen on back again. If i click power button the phone gets disconnected. its really irritating bug.
Also if i am using GPS while driving and If i get a call....after attending the call and I am not able to go back to navigation app. it shows me black screen.
These two things are annoying me like hell. Any help is appreciated...
maybe set display to never sleep? esp. while driving? will drain the battery faster, but in the car presumably you would have a charger available...
Are you using a screen protector or case thats covering the proximity sensor? Its one of the little spots in the upper left corner. Where most protectors have a cut out. Anyways, thats there to shut the screen off on the phone when you are on it so you dont accidentally hit any buttons. If its covered it wont allow you to turn the display on because it thinks its next to your face. Either that or maybe your sensor is bad.
I dropped my Moto G 2015 today. It was a nasty fall but the case ensured no screen crack. I had already cracked and replaced the screen prior to this.
The battery (Hidden LED in the earpiece) is now permanently lit. I'm running LineageOS and I tried turning off the light from settings where it shows that it's already turned off. Switching it on just makes the light glow brighter.
Any ideas what this might be and how to fix it?
shawnkenneth said:
I dropped my Moto G 2015 today. It was a nasty fall but the case ensured no screen crack. I had already cracked and replaced the screen prior to this.
The battery (Hidden LED in the earpiece) is now permanently lit. I'm running LineageOS and I tried turning off the light from settings where it shows that it's already turned off. Switching it on just makes the light glow brighter.
Any ideas what this might be and how to fix it?
Click to expand...
Click to collapse
The LED/digitizer probably shifted with respect to the mainboard. You could try removing the LCD/digitizer and look at it and see if you see anything(including unplugging the ribbon cable), and then put it back on. If that light is part of the LCD/digitizer assembly you could replace it again. I don't know as I haven't been in there yet.
I dropped my gs6 and the screen cracked but the screen doesnt turn on.
The led indicator and soft button turns on but there is no life on the screen itself.
So does this mean that i only need to replace the screen or is there some internal damage like motherboard etc?
I thought if you crack your screen it does show you whats on the screen but you cant interract with it.
Sorry for my very bad english.
Thanks!
Should be broken only display, not motherboard etc but in the worst case can be also something like that. Try to do something on the phone when is supposedly turned on, for example change volume level or turn on the silence mode. If something will be happened for example some sound or vibration, then there is a chance...
Hi, i dipped my s7 edge in a bowl of water and when i took it out the screen was going crazy but only the top right. Also a while later the back button light flickers and when i turn off the button lights the screen is fine. But another problem is that the screen when turned on it flickers green and sometimes stays green, but turning it off and on for a while it works again. It seems that water got inside the front camera, but when i check the water damage indicator it is not red. Any help
Don't put your phone in water
Let it dry out before trying to use it
Leave it in a rice bowl to try get inner moisture out
Greetings.
I just picked up the Verizon variant of the V50 and have a question, hopefully someone with a V50 can help me out. My proximity sensor, which is supposed to only be active during phone calls to shut off the screen, seems to be responding to darkness. If I'm in a lit room and the screen is locked, the phone shows the "Always on Display" like normal. However, if I turn off the lights, the screen goes black, the fingerprint sensor does not respond to touch and I have to press the power button multiple times to get the screen to activate. If I turn the light back on in the room, the AOD comes back on and the fingerprint sensor responds to touch.
I took a trip to my local vzw store hoping they would have a V50 on display to test this since I don't know if this is a phone feature or a defect. I'd hate to go through the hassle of swapping phones only to have the new one do it too.
I do have a screen protector on the phone but it is not covering the proximity sensor.
Can anyone with a V50 test theirs to see what happens and let me know? I'd appreciate it.
I just tested this on a Verizon LG V50. Almost pitch black while on a call:
- Screen blanks when I put it up to my ear
- Screen lights up when I pull it away.
dinotheo said:
I just tested this on a Verizon LG V50. Almost pitch black while on a call:
- Screen blanks when I put it up to my ear
- Screen lights up when I pull it away.
Click to expand...
Click to collapse
Mine works fine when I'm on a call, it's when I'm not on a call. What if you have it just sitting on a table and you turn off lights and make it completely dark in the room? Does the aod turn off or stay on?
dinotheo said:
I just tested this on a Verizon LG V50. Almost pitch black while on a call:
- Screen blanks when I put it up to my ear
- Screen lights up when I pull it away.
Click to expand...
Click to collapse
Or try this. Have it sitting face up on a table with the AOD on and put your finger over the earpiece/proximity sensor area. Does the display turn off? Mine does and I don't think it should. My V30 didn't.
rustypie said:
Or try this. Have it sitting face up on a table with the AOD on and put your finger over the earpiece/proximity sensor area. Does the display turn off? Mine does and I don't think it should. My V30 didn't.
Click to expand...
Click to collapse
Sorry, it was late when I responded and I neglected to mention that.
When not on a call, in pitch black, covering the screen doe not blank it out. Only when on a call does it blank when you cover the proximity sensor.
dinotheo said:
Sorry, it was late when I responded and I neglected to mention that.
When not on a call, in pitch black, covering the screen doe not blank it out. Only when on a call does it blank when you cover the proximity sensor.
Click to expand...
Click to collapse
I appreciate your help. What about in regularly lit room? With phone showing the always on display, if you cover earpiece area, does display turn off or stay on? On mine, just sitting on a table in a lit room, and it's showing the clock on the aod, if I cover the earpiece display turns off. Sounds like I might have a defective device.
rustypie said:
I appreciate your help. What about in regularly lit room? With phone showing the always on display, if you cover earpiece area, does display turn off or stay on? On mine, just sitting on a table in a lit room, and it's showing the clock on the aod, if I cover the earpiece display turns off. Sounds like I might have a defective device.
Click to expand...
Click to collapse
OK....Let me apologize once more. I missed the AOD part.
AOD turns off when covered regardless of light or dark environment. You want this to happen. The regular home screen does not blank except during a phone call.
You want the AOD to blank such as putting it in your pocket. This is an OLED and they burn. I have a Galaxy S8 where you can see that I used Waze a LOT. I would say that this behavior is normal.
Sorry about the confusion and missing where you asked for AOD.
dinotheo said:
OK....Let me apologize once more. I missed the AOD part.
AOD turns off when covered regardless of light or dark environment. You want this to happen. The regular home screen does not blank except during a phone call.
You want the AOD to blank such as putting it in your pocket. This is an OLED and they burn. I have a Galaxy S8 where you can see that I used Waze a LOT. I would say that this behavior is normal.
Sorry about the confusion and missing where you asked for AOD.
Click to expand...
Click to collapse
No problem, thanks for your help. Can I ask one more thing? With the AOD on, with phone sitting face up with no obstructions anywhere and you make it pitch black in the room WITHOUT covering or touching the sensor. Does the AOD stay lit up or turn off?
In that scenario the AOD stays on.
Went in to a room with AOD on. Turned lights off....AOD stays on.
Turned the lights back on and then off to test. It stayed on.
As soon as I cover the proximity sensor with my hand, it turns off.
dinotheo said:
In that scenario the AOD stays on.
Went in to a room with AOD on. Turned lights off....AOD stays on.
Turned the lights back on and then off to test. It stayed on.
As soon as I cover the proximity sensor with my hand, it turns off.
Click to expand...
Click to collapse
I think that's all I need to know. Thanks so much for your time. I appreciate it.
rustypie said:
Greetings.
I just picked up the Verizon variant of the V50 and have a question, hopefully someone with a V50 can help me out. My proximity sensor, which is supposed to only be active during phone calls to shut off the screen, seems to be responding to darkness. If I'm in a lit room and the screen is locked, the phone shows the "Always on Display" like normal. However, if I turn off the lights, the screen goes black, the fingerprint sensor does not respond to touch and I have to press the power button multiple times to get the screen to activate. If I turn the light back on in the room, the AOD comes back on and the fingerprint sensor responds to touch.
I took a trip to my local vzw store hoping they would have a V50 on display to test this since I don't know if this is a phone feature or a defect. I'd hate to go through the hassle of swapping phones only to have the new one do it too.
I do have a screen protector on the phone but it is not covering the proximity sensor.
Can anyone with a V50 test theirs to see what happens and let me know? I'd appreciate it.
Click to expand...
Click to collapse
Dude you shold try to clean your sensor which is placed between both selfie cameras... Wipe it some wet tissue i was also facing same problem for some days but now it's totally fine after i clean it with wet wipes... I hope this will helpfull for you too
rustypie said:
rustypie said:
Greetings.
I just picked up the Verizon variant of the V50 and have a question, hopefully someone with a V50 can help me out. My proximity sensor, which is supposed to only be active during phone calls to shut off the screen, seems to be responding to darkness. If I'm in a lit room and the screen is locked, the phone shows the "Always on Display" like normal. However, if I turn off the lights, the screen goes black, the fingerprint sensor does not respond to touch and I have to press the power button multiple times to get the screen to activate. If I turn the light back on in the room, the AOD comes back on and the fingerprint sensor responds to touch.
I took a trip to my local vzw store hoping they would have a V50 on display to test this since I don't know if this is a phone feature or a defect. I'd hate to go through the hassle of swapping phones only to have the new one do it too.
I do have a screen protector on the phone but it is not covering the proximity sensor.
Can anyone with a V50 test theirs to see what happens and let me know? I'd appreciate it.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
I have the same problem. And I have already discovered that it is clearly a failure of the proximity sensor since with a sensor testing application it tells me that I have an obstacle 0cm from the screen. Have you managed to fix it?
gubees said:
I have the same problem. And I have already discovered that it is clearly a failure of the proximity sensor since with a sensor testing application it tells me that I have an obstacle 0cm from the screen. Have you managed to fix it?
Click to expand...
Click to collapse
Try this. Ensure there is no screen protector over the selfie camera. Either cut a relief or use a pre cut protector for v50s/g8x. It worked for me.
Try this; ensure there is no screen protector over the selfie camera. Either cut out/relief that area, use a precut V50S/G8X protector OR no protector at all. It worked for me.
Well this is most common issues with low level refurbs.
Please use this App - it will fix the issue.