Latest HTC One A9 Unlocked Edition OTA
OTA_HIA_AERO_UL_M60_SENSE7GP_ATT_MR_NA_Gen_Unlock_1.57.617.41-1.57.617.32_release_480058icet4xqcwsg0zr0g.zip
http://d-h.st/YwvS
techlogik said:
Latest HTC One A9 Unlocked Edition OTA
OTA_HIA_AERO_UL_M60_SENSE7GP_ATT_MR_NA_Gen_Unlock_1.57.617.41-1.57.617.32_release_480058icet4xqcwsg0zr0g.zip
http://d-h.st/YwvS
Click to expand...
Click to collapse
I have European version 1.56 , how can I install this?
Sent from my HTC One A9 using XDA-Developers mobile app
If you want to install this update you need to S-OFF your phone and change CID and MID using fastboot command from download mode:
fastboot oem writecid 11111111
fastboot oem writemid 2PQ912000
Then you will be able to flash US firmware.
Anybody have a valid TRWP system image for 1.57.617.32?
I took one but it still failed the verity check.
NuShrike said:
Anybody have a valid TRWP system image for 1.57.617.32?
I took one but it still failed the verity check.
Click to expand...
Click to collapse
Oh well, I flashed the .32 RUU and restored data from TWRP/FlashFire, flash this update, and I think I'm done.
NuShrike said:
Oh well, I flashed the .32 RUU and restored data from TWRP/FlashFire, flash this update, and I think I'm done.
Click to expand...
Click to collapse
Did you use FlashFire to only restore data? Just curious.
qooob said:
If you want to install this update you need to S-OFF your phone and change CID and MID using fastboot command from download mode:
fastboot oem writecid 11111111
fastboot oem writemid 2PQ912000
Then you will be able to flash US firmware.
Click to expand...
Click to collapse
This OTA will not flash if you're superCID. You must use the US unlocked or developer CID specifically to flash this OTA (BS_001 or BS_002).
The RUU will flash if you are superCID, but 1.57.617.41 RUU hasn't been officially (or unofficially that I'm aware of) released yet.
eelpout said:
Did you use FlashFire to only restore data? Just curious.
Click to expand...
Click to collapse
I used FlashFire generated backup in TWRP to restore data.
Of course internal-storage was still wiped, but I manually back that up these days (with SyncMe app), and don't put anything there, if possible.
qooob said:
If you want to install this update you need to S-OFF your phone and change CID and MID using fastboot command from download mode:
fastboot oem writecid 11111111
fastboot oem writemid 2PQ912000
Then you will be able to flash US firmware.
Click to expand...
Click to collapse
Will it really work? My phone will work properly? How to get S-OFF? Will S-On be back after I flash? Do I need to root?
It worked for me.
To get S-Off I used SunShine S-Off. You can disabled S-Off by running command `fastboot oem writesecureflag 3`. You need root to run SunShine.
After getting S-Off be careful not to mess HBOOT otherwise your phone will be hard-bricked and non-recovereable at home (you would need a programmer (device)).
qooob said:
If you want to install this update you need to S-OFF your phone and change CID and MID using fastboot command from download mode:
fastboot oem writecid 11111111
fastboot oem writemid 2PQ912000
Then you will be able to flash US firmware.
Click to expand...
Click to collapse
Will I get OTA?
MVince25 said:
Will I get OTA?
Click to expand...
Click to collapse
Yes, you should. You will need to relock the bootloader and s-on to make OTA work as far as I remember.
Convert UHL to UL
Hi, I have an European Unlocked A9, stock firmware 1.56.401.70. Also, I am S-off, SuperCid, and my device has 2GB of RAM. Can I use US Unlocked RUU to convert my HTC? I want to use 1.57.617.52 software. Is it ok to convert? The US unlocked version has 3GB RAM... Thanks !
qooob said:
Yes, you should. You will need to relock the bootloader and s-on to make OTA work as far as I remember.
Click to expand...
Click to collapse
bro OTA no need S-ON just relock bootloader
Related
hi Guyzz
im new to Android phone
i've Unlock Bootloader from HTC Dev, roorted my HTC Explorer,
i've relocked bootloader of my HTC Explorer through this command "fastboot oem lock" but facing some issues like
after relocking bootloader my phone does not starts it show fastboot menu again n again, i tried many time by removing battery but same issue occurs
After applying all those solutions that found on google notthing happens
help me guyzzzz
If you relock your bootloader, you should flash stock ROM (with stock kernel) and stock recovery. Otherwise the phone will be stuck at the HBOOT screen with a "Security Warning" message
relock bootloader
Sachin Thomas said:
If you relock your bootloader, you should flash stock ROM (with stock kernel) and stock recovery. Otherwise the phone will be stuck at the HBOOT screen with a "Security Warning" message
Click to expand...
Click to collapse
Oh thats great but how can i do this sir....?
Plz describe in detail
ammarraza94 said:
Oh thats great but how can i do this sir....?
Plz describe in detail
Click to expand...
Click to collapse
Why are you trying to do this? You have lost your warranty by unlocking the bootloader. Re-locking will not make any difference.
If you are trying to return to stock ROM, unlock your bootloader and flash this:
http://forum.xda-developers.com/showthread.php?t=2225776
Or if you really want to re-lock it find an RUU appropriate for your radio version and run it after re-locking
Sachin Thomas said:
Why are you trying to do this? You have lost your warranty by unlocking the bootloader. Re-locking will not make any difference.
If you are trying to return to stock ROM, unlock your bootloader and flash this:
http://forum.xda-developers.com/showthread.php?t=2225776
Or if you really want to re-lock it find an RUU appropriate for your radio version and run it after re-locking
Click to expand...
Click to collapse
Hello,
Yes Sir i don't have Warranty...& how can i flash stock ROM (with stock kernel) and stock recovery
ammarraza94 said:
Hello,
Yes Sir i don't have Warranty...& how can i flash stock ROM (with stock kernel) and stock recovery
Click to expand...
Click to collapse
Download RUU and run it after relocking
Sachin Thomas said:
Download RUU and run it after relocking
Click to expand...
Click to collapse
hi Dear this is my Radio Version & HBoot Version
HBOOT-1.01.0000
RADIO-1.10.80.13M2
Can i Apply this RUU on my Phone
"RUU_Pico_HTC_Europe_1.28.401.1_Radio_10.35d.80.09H_1.11.82.17_release_230964_signed"
ammarraza94 said:
hi Dear this is my Radio Version & HBoot Version
HBOOT-1.01.0000
RADIO-1.10.80.13M2
Can i Apply this RUU on my Phone
"RUU_Pico_HTC_Europe_1.28.401.1_Radio_10.35d.80.09H_1.11.82.17_release_230964_signed"
Click to expand...
Click to collapse
What's your device's CID? Type "fastboot getvar cid" in fastboot mode to find out
Sachin Thomas said:
What's your device's CID? Type "fastboot getvar cid" in fastboot mode to find out
Click to expand...
Click to collapse
CID: HTC__Y13
finished. total time: 0.000s
ammarraza94 said:
CID: HTC__Y13
finished. total time: 0.000s
Click to expand...
Click to collapse
According to this page HTC__Y13 corresponds to HTC_Europe
http://mobility.forumsee.com/a/m/s/p12-9502-061490--operator-name-and-cid-classification-for-mozart-roms-ansar.html
So I think you'll be able to use the European RUU. The installation will not continue if it's incompatible, it'll show Error [131]
Sachin Thomas said:
According to this page HTC__Y13 corresponds to HTC_Europe
http://mobility.forumsee.com/a/m/s/p12-9502-061490--operator-name-and-cid-classification-for-mozart-roms-ansar.html
So I think you'll be able to use the European RUU. The installation will not continue if it's incompatible, it'll show Error [131]
Click to expand...
Click to collapse
Hello
Sir which RUU Can i Use. What do u Prefer..?
"RUU_Pico_HTC_Europe_1.17.401.2 Radio_10.30.80.09 H_1.10.80.13M2 release_221180_signed"
"RUU_Pico_HTC_Europe_1.28.401.1 Radio_10.35d.80.09 H_1.11.82.17 release_230964_signed"
These Is My Phone Details
"HBOOT-1.01.0000"
"RADIO-1.10.80.13M2"
"CID: HTC__Y13 .finished. total time: 0.000s"
You can use any RUU that contains a radio that's newer than your current radio version
Sachin Thomas said:
You can use any RUU that contains a radio that's newer than your current radio version
Click to expand...
Click to collapse
pls i need a little help.
my phone cvid is : VODAP304
i've noticed that theres not this on that site you gave ->http://mobility.forumsee.com/a/m/s/...cid-classification-for-mozart-roms-ansar.html
maybe thats why i keep gettint the "error131" whenever i try to install a RUU...
i'm from portugal, so i'm using a europe ruu everytime i try to install, but i keep getting that error131 and saying that i should install a version compatible with my phone... idk what to do... can you help me?
can i flash RUU 2.20 if my bootloader is relocked and S-on and tampered ?
slytidar said:
can i flash RUU 2.20 if my bootloader is relocked and S-on and tampered ?
Click to expand...
Click to collapse
If you change your CID back to CWS_001, theoretically, you should not brick running the 2.20 RUU, I'm not sure what will happen if you were to upgrade to 3.18 at any point. Probably brick in that case.
Safest way to RUU is to S-OFF first.
exad said:
If you change your CID back to CWS_001, theoretically, you should not brick running the 2.20 RUU, I'm not sure what will happen if you were to upgrade to 3.18 at any point. Probably brick in that case.
Safest way to RUU is to S-OFF first.
Click to expand...
Click to collapse
i cant s ooff as i can only go to bootloader menu
or if there is any way to do it while in the bootloader menu
slytidar said:
i cant s ooff as i can only go to bootloader menu
or if there is any way to do it while in the bootloader menu
Click to expand...
Click to collapse
There is no way to S-OFF without a ROM.
So your choices are
Unlock, flash recovery, flash rom, fastboot flash boot.img, S-OFF, RUU.
Or
Fastboot writecid CWS__001, RUU 2.20, Never upgrade for fear of bricking.
exad said:
There is no way to S-OFF without a ROM.
So your choices are
Unlock, flash recovery, flash rom, fastboot flash boot.img, S-OFF, RUU.
Or
Fastboot writecid CWS__001, RUU 2.20, Never upgrade for fear of bricking.
Click to expand...
Click to collapse
shall i try the last one ?
"Fastboot writecid CWS__001"?
slytidar said:
shall i try the last one ?
"Fastboot writecid CWS__001"?
Click to expand...
Click to collapse
Do whichever one you want. Just remember without S-OFF, I'm pretty sure you will not be able to upgrade to 3.18+ without bricking.
fixed it bt flashing a stock boot.img
thanks
exad said:
If you change your CID back to CWS_001, theoretically, you should not brick running the 2.20 RUU, I'm not sure what will happen if you were to upgrade to 3.18 at any point. Probably brick in that case.
Safest way to RUU is to S-OFF first.
Click to expand...
Click to collapse
2.20 RUU will run with SuperCID, bootloader locked and S-on. With the 3.18 RUU, you will brick under those conditions.
Is it possible to do a JB RUU after i just superCID and S-OFF? Because i wanna go back to stock.
Yes,but don't use the OTA RUU or you will brick your phone
yooouuri said:
Is it possible to do a JB RUU after i just superCID and S-OFF? Because i wanna go back to stock.
Click to expand...
Click to collapse
You can use any ruu while s-OFF, just simply plug phone to computer and run ruu. No need to relock bootloader.
For the supercid, it is recommended to change it back to original with fastboot command.
Fastboot oem write cid xxxxxxxx.
There has been a few bricks takin Jb ota while still supercid.
Sent from my HTC One S
tominozh said:
You can use any ruu while s-OFF, just simply plug phone to computer and run ruu. No need to relock bootloader.
For the supercid, it is recommended to change it back to original with fastboot command.
Fastboot oem write cid xxxxxxxx.
There has been a few bricks takin Jb ota while still supercid.
Sent from my HTC One S
Click to expand...
Click to collapse
Uwe303 said:
Yes,but don't use the OTA RUU or you will brick your phone
Click to expand...
Click to collapse
Thanks for your fast response, how do i know my original CID?
Im going to flash
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
So do i need to change my CID?
yooouuri said:
Thanks for your fast response, how do i know my original CID?
Im going to flash
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
So do i need to change my CID?
Click to expand...
Click to collapse
Just change it to
Fastboot oem writecid HTC__001
Sent from my HTC One S
tominozh said:
Just change it to
Fastboot oem writecid HTC__001
Sent from my HTC One S
Click to expand...
Click to collapse
Thanks
Edit;
If i change my CID to HTC__001 and i run the RUU, i cant change my language to dutch.
@tominozh
Edit;
Changed to HTC__E11, lets run the RUU again and hope!
CIDs list: http://forum.xda-developers.com/showthread.php?t=2139447
tominozh said:
Just change it to
Fastboot oem writecid HTC__001
Sent from my HTC One S
Click to expand...
Click to collapse
Its not mandatory to change your SuperCID back to stock just to install a RUU (with OTA RUU you get problems, but not with normal ones).
yooouuri said:
Thanks
Edit;
If i change my CID to HTC__001 and i run the RUU, i cant change my language to dutch.
@tominozh
Edit;
Changed to HTC__E11, lets run the RUU again and hope!
CIDs list: http://forum.xda-developers.com/showthread.php?t=2139447
Click to expand...
Click to collapse
Where you cant change the language?
Help
I'm trying to return my old HTC One XL (Telstra) back to stock. It's current state is:
S-Off
CID = 11111111
TWRP
hboot: 2.15
I've found the latest full RUU from this thread (all the links to newer RUU are broken):
http://forum.xda-developers.com/showthread.php?t=2119610&page=5
3.17.841.2
File Timestamp: 04/12/12
Publically Seen: 24/12/12
Android: 4.1.1
Kernel: 3.4.10-g240d4d5
hboot: 2.14.0000
radio: 0.23a.32.09.29_10.128.32.34a
First, can I us this RUU even though I have a newer hboot (2.15) installed?
Second, do I need to change my CID back? (using fastboot oem writecid TELST001). Will changing the CID loose my S-Off?
Third, is this the process:
1) Flash the stock recovery:
fastboot flash recovery recovery.img (taken out of the RUU)
fastboot reboot-bootloader
fastboot erase cache
2) Flash the stock boot.img
fastboot flash boot boot.img (taken out of the RUU)
fastboot reboot-bootloader
fastboot erase cache
3) Re-lock the boot loader
fastboot oem lock
fastboot reboot-bootloader
fastboot erase cache
4) Load RUU
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot reboot
After all this, I assume I'll loose TWRP etc. but will have a stock phone, and the ability to load OTA updates from the carrier.
THANKS
That 3.17.841.2 file isn't an RUU, it's an OTA. It's a zip file, an RUU is always an exe program. There's only one Telstra RUU available and it's a much earlier version. You can't flash that file using fastboot, an OTA can only be applied via stock recovery, and it requires the correct previous OS to be already installed on the device. If you want to return the device to stock you just run the latest actual RUU (1.89 from memory), and follow this process:
1) Run RUU exe via Windows.
2) Revert to Telstra CID.
Code:
fastboot oem writecid TELST001
3) Lock bootloader.
Code:
fastboot oem lock
4) Go back to s-on.
Code:
fastboot oem writesecureflag 3
5) Take OTA updates via Settings/About Phone/Software Updates until you reach the point you wavy to be at.
Sent from my Evita
timmaaa said:
That 3.17.841.2 file isn't an RUU, it's an OTA. It's a zip file, an RUU is always an exe program. There's only one Telstra RUU available and it's a much earlier version. You can't flash that file using fastboot, an OTA can only be applied via stock recovery, and it requires the correct previous OS to be already installed on the device. If you want to return the device to stock you just run the latest actual RUU (1.89 from memory), and follow this process:
1) Run RUU exe via Windows.
2) Revert to Telstra CID.
Code:
fastboot oem writecid TELST001
3) Lock bootloader.
Code:
fastboot oem lock
4) Go back to s-on.
Code:
fastboot oem writesecureflag 3
5) Take OTA updates via Settings/About Phone/Software Updates until you reach the point you wavy to be at.
Sent from my Evita
Click to expand...
Click to collapse
Won't running the exe RUU before changing the CID fail?
And I thought you could still get the RUU as a ZIP (although most are just smaller OTA updates). The ZIP is 700Mb.
DACcer said:
Won't running the exe RUU before changing the CID fail?
Click to expand...
Click to collapse
No, you have s-off. Having s-off bypasses all security checks.
DACcer said:
And I thought you could still get the RUU as a ZIP (although most are just smaller OTA updates). The ZIP is 700Mb.
Click to expand...
Click to collapse
No, an RUU is always an exe file. Just like an OTA is always a zip file.
Sent from my Evita
timmaaa said:
No, you have s-off. Having s-off bypasses all security checks.
No, an RUU is always an exe file. Just like an OTA is always a zip file.
Sent from my Evita
Click to expand...
Click to collapse
Sweet, cheers timmaaa .
Now, I just need to find the RUU, all the links are either broken, or to the HTC website which has gone.
Any suggestions?
And would I need to downgrade HBOOT before RUU?
DACcer said:
Sweet, cheers timmaaa .
Now, I just need to find the RUU, all the links are either broken, or to the HTC website which has gone.
Any suggestions?
And would I need to downgrade HBOOT before RUU?
Click to expand...
Click to collapse
Answer my own question:
http://androidruu.com/index.php?developer=Evita
Does this sound right:
RUU_Evita_UL_Telstra_WWE_1.81.841.1_R_Radio_0.17a.32.09.03_2_10.85.32.16L_release_259804_signed.exe
You'll find the RUU here:
http://androidruu.com/?developer=Evita
You don't need to do anything before running the RUU, just connect in fastboot mode and get it cracking.
PS. We press the thanks button to show our gratitude on XDA [emoji2]
Sent from my Evita
timmaaa said:
You'll find the RUU here:
http://androidruu.com/?developer=Evita
You don't need to do anything before running the RUU, just connect in fastboot mode and get it cracking.
PS. We press the thanks button to show our gratitude on XDA [emoji2]
Sent from my Evita
Click to expand...
Click to collapse
All worked . Thanks!!
You're welcome, glad to help.
Sent from my Evita
HTC A9 s-off. after flashing RUU.exe software still modified and bootloader unlocked. WHY?????
UAALEX said:
HTC A9 s-off. after flashing RUU.exe software still modified and bootloader unlocked. WHY?????
Click to expand...
Click to collapse
RUU doesn't regain s-on and it doesn't relock bootloader. To relock bootloader you should be running a command in fastboot that's similar to
Code:
fastboot oem relock
EVOuser94 said:
RUU doesn't regain s-on and it doesn't relock bootloader. To relock bootloader you should be running a command in fastboot that's similar to
Code:
fastboot oem relock
Click to expand...
Click to collapse
but RUU.exe must set software to official, or not?
UAALEX said:
but RUU.exe must set software to official, or not?
Click to expand...
Click to collapse
To ruu you need to relock bootloader only if you are s-on, if you're s-off you don't need to worry about that.
Ruu also might not set it to official, because you would have a modified boot.img, though correct me if I'm wrong.