Database Info

Trying to flash stock rom via RUU - Error [155]

I'm stuck in a bootloop / soft brick and would like to go back to stock rom / RUU
Phone is: HTC One S - UK - Vodafone
I'm tried using:
RUU_Ville_U_Vodafone_UK_1.78.161.2_Radio_0.16.31501S.17_2_10.23.31501S.10L_release_258386_signed
RUU_Ville_U_Vodafone_UK_1.53.161.3_Radio_0.15.31501S.19_2_10.13.31501S.06L_release_251482_signed
RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5_Radio_1.06es.50.02.31_10.09a.50.04L_release_275655_signed
Always getting the same error message:
ERROR(155): UNKNOWN ERROR
The ROM Update Utility cannot update your Androidphone
Please get the correct ROM Update Utiility and try again
Pretty obvious what I should do
But cant seem to be able to locate the correct RUU file
Any idea?
Many thanks
Cedric

What is your current software version?
You can change your CID to HTC__001 and then flash unbranded 2.31 (the one you already have)

Did you relock your bootloader?
Sent from my HTC One S using xda premium

Yes I did, Thank you
mikeyinid said:
Did you relock your bootloader?
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse

cid: VODAP001
Could you pleaase confirm how to change my CID?
Tried fastboot oem writecid HTC__001 and that blocked bootloader...
Thank you!
Error message
C:\fastboot oem writecid HTC__001
...
(bootloader) ville_init_sd, SD card already power on
(bootloader) sdhw_7xxx_open: id=0
(bootloader) [SD_HW_ERR] SD: No device attached
(bootloader) 902910 902E20
FAILED (status read failed (Too many links))
finished. total time: 1.271s
Since I posted this morning
I also tried to change CID via adb shell but it doesnt work - error message = error: device not found
And I allowed USB debugging + fastboot recognise USB connection
Any idea? really lost now!!
Thank you very much
usaff22 said:
What is your current software version?
You can change your CID to HTC__001 and then flash unbranded 2.31 (the one you already have)
Click to expand...
Click to collapse

Any luck? Haven't any progress...
Many thanks

cplessier said:
Any luck? Haven't any progress...
Many thanks
Click to expand...
Click to collapse
I had a similar problem with my orange branded one s but got it up and running by doing the following :
unlock bootloader
install twrp recovery
boot into recovery (must be in recovery not bootloader or adb shell will not work)
change orange cid to generic cid http://forum.xda-developers.com/showthread.php?p=26516911#post26516911
flash stock recovery
relock bootloader
install latest european ruu
Hope this helps

I managed to change the CID to Super CID
But still getting Error 155 when trying to install RUU
Any other idea?
Many thanks

cplessier said:
I managed to change the CID to Super CID
But still getting Error 155 when trying to install RUU
Any other idea?
Many thanks
Click to expand...
Click to collapse
If your sure the cid was sucessfully changed (i used HTC_001) and you flashed stock recovery then relocked bootloader im all out of ideas. thats what worked for me.

cplessier said:
I managed to change the CID to Super CID
But still getting Error 155 when trying to install RUU
Any other idea?
Many thanks
Click to expand...
Click to collapse
What is error 155?

usaff22 said:
What is error 155?
Click to expand...
Click to collapse
Error 155 gets when either your bootloader is locked or u r using the wrong RUU
If you updated to jelly bean , sense 4+ and then rooted your ONE S and then installed other roms like CM10, etc, you will get error 155 if you try to use any RUU. Thats because your hboot is updated when upgrading to sense 4+,JB.
Thus to revert back to stock....
1. get stock ICS Sense 4.1 ROM,
2. flash stock recovery.
3. Use OTA update to jelly bean,Sense 4+.
4. Factory reset your phone to remove any non-stock stuff from the ROM.
5. you have STOCK Sense 4+!!
6. then if you want you can relock boot loader .( but I havent tried it, might cause problem)

Your hboot won't be updated unless it's a ota or a ruu am I right eg I was on 4.04 then rooted and installed trickdroid but I am still on the hboot that came with 4.04 ruu.
Sent from my HTC One S using xda premium

Same problem: Error 155: Unknown Error
I'm on Vodafone IE.
Successfully changed CID to HTC__001, restored stock, relocked bootloader and I can't install any RUU, tried
RUU_Ville_U_HTC_Europe_1.78.401.2_Radio_0.16.31501S.17_2_10.23.31501S.10L_release_258480_signed
RUU_Ville_U_ICS_40_S_HTC_Europe_2.21.401.10_Radio_1.06s.50.02.27_2_10.08.50.04L__release_271119_signed
Any ideas?

OK
managed to update with
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4

cplessier said:
I'm stuck in a bootloop / soft brick and would like to go back to stock rom / RUU
Phone is: HTC One S - UK - Vodafone
I'm tried using:
RUU_Ville_U_Vodafone_UK_1.78.161.2_Radio_0.16.31501S.17_2_10.23.31501S.10L_release_258386_signed
RUU_Ville_U_Vodafone_UK_1.53.161.3_Radio_0.15.31501S.19_2_10.13.31501S.06L_release_251482_signed
RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5_Radio_1.06es.50.02.31_10.09a.50.04L_release_275655_signed
Always getting the same error message:
ERROR(155): UNKNOWN ERROR
The ROM Update Utility cannot update your Androidphone
Please get the correct ROM Update Utiility and try again
Pretty obvious what I should do
But cant seem to be able to locate the correct RUU file
Any idea?
Many thanks
Cedric
Click to expand...
Click to collapse
Wipe everything.Should be able to flash CyanogenMod 10. After that, change back the CID to VODAP001 (mmcblk0p4 and build.prop).

Need rom 3.32.708.12

Anybody can help me find ROM 3.32.708.12. ? My phone is breaked and it is so important.
Thank for your help

marco1962 said:
Anybody can help me find ROM 3.32.708.12. ? My phone is breaked and it is so important.
Thank for your help
Click to expand...
Click to collapse
Do you mean stoc ROM? We need your CID to get it. to find it boot to bootloader and use the following fastboot command:
fastboot getvar cid
If you are unlocked and just want a ROM to flash, all ICS and JB ROMs are compatible.

astar26 said:
Do you mean stoc ROM? We need your CID to get it. to find it boot to bootloader and use the following fastboot command:
fastboot getvar cid
If you are unlocked and just want a ROM to flash, all ICS and JB ROMs are compatible.
Click to expand...
Click to collapse
RUU official ROM, with CID HTC_622

marco1962 said:
RUU official ROM, with CID HTC_622
Click to expand...
Click to collapse
Couldn't find exact ROM for you, but try this:
http://www.androidruu.com/getdownlo...0U_11.24A.3504.31_M_release_266490_signed.exe

astar26 said:
Couldn't find exact ROM for you, but try this:
http://www.androidruu.com/getdownlo...0U_11.24A.3504.31_M_release_266490_signed.exe
Click to expand...
Click to collapse
Dear Astra, so thanks for your help. But again I received ERROR [131]: ....
This is my boot loader screenshot. Hope this will help to solve my problem.

marco1962 said:
Dear Astra, so thanks for your help. But again I received ERROR [131]: ....
This is my boot loader screenshot. Hope this will help to solve my problem.
Click to expand...
Click to collapse
It seems that you re-locked your bootloader. Can you try to unlock it? it may help restore your phone without using an RUU. Use th following command:
fastboot oem unlock
Edit: also, how did you get to this situation? It might help solving it.

astar26 said:
It seems that you re-locked your bootloader. Can you try to unlock it? it may help restore your phone without using an RUU. Use th following command:
fastboot oem unlock
Edit: also, how did you get to this situation? It might help solving it.
Click to expand...
Click to collapse
The attached is result of command fastboot oem lock
and how was this this.
i was using Cygen ROM 4.2.2 for several months. one day stoped on boot screen. I tried to install ROM again but can not.
Final i tried to lock and use from official RUU, but all type of RUU give the erroe 131.
this is my story

To unlock ur bootloader again u will need to use the Unlock token again from htc dev.

jmcclue said:
To unlock ur bootloader again u will need to use the Unlock token again from htc dev.
Click to expand...
Click to collapse
now again Unlocked phone, even wrote CWM and installed stock ROM.
But after reboot stop on HTC logo, and don't do anything more.
i am going to became crazy.

marco1962 said:
now again Unlocked phone, even wrote CWM and installed stock ROM.
But after reboot stop on HTC logo, and don't do anything more.
i am going to became crazy.
Click to expand...
Click to collapse
Because you are on S-ON you need to flash the boot.img of the Rom via fastboot command or
flash 4ext recovery
Enable smartflash from it
Flash the Rom
Sent from my HTC Sensation Z710e using xda premium

Help( error 155 & custom flashing fail)

I flashed RUU i got error 155 .and i put it in fastboot flashed and same 155 error pops up.i tried flash it with CM by recovery TWRP. was fail i changed the reocvery to CWM than was same fail while i flashed mike1986 or CM nightly .
whats problem?

AnGrY DuDe said:
I flashed RUU i got error 155 .and i put it in fastboot flashed and same 155 error pops up.i tried flash it with CM by recovery TWRP. was fail i changed the reocvery to CWM than was same fail while i flashed mike1986 or CM nightly .
whats problem?
Click to expand...
Click to collapse
post your bootloader details and what ruu did you try to flash

rzr86 said:
post your bootloader details and what ruu did you try to flash
Click to expand...
Click to collapse
s-on
bootloader unocked
cid is ___jp 15
HBOOT IS 1.27.0000
I FLASHED MANY RUU NOT ONLY 1 EVEN FLASHED T-MOBILE UK ONE .
I THINK 1 THING I DIDN'T DO IT IS ONLY THE S-ON.

AnGrY DuDe said:
s-on
bootloader unocked
cid is ___jp 15
HBOOT IS 1.27.0000
I FLASHED MANY RUU NOT ONLY 1 EVEN FLASHED T-MOBILE UK ONE .
I THINK 1 THING I DIDN'T DO IT IS ONLY THE S-ON.
Click to expand...
Click to collapse
you have to relock first your bootloader in order to flash a ruu.exe
also you need to use the specific ruu for your region(same firmware or higher) and cid

rzr86 said:
you have to relock first your bootloader in order to flash a ruu.exe
also you need to use the specific ruu for your region(same firmware or higher) and cid
Click to expand...
Click to collapse
i want flash it arabic.only ara ruu contain arabic

AnGrY DuDe said:
i want flash it arabic.only ara ruu contain arabic
Click to expand...
Click to collapse
can you post your firmware version?

rzr86 said:
can you post your firmware version?
Click to expand...
Click to collapse
The device version is: not showed .while i start RUU .Because its fail.it won't go into android boot
but the highest version RUU i have is: 3.32.415.15

AnGrY DuDe said:
The device version is: not showed .while i start RUU .Because its fail.it won't go into android boot
but the highest version RUU i have is: 3.32.415.15
Click to expand...
Click to collapse
try this
http://fileom.com/6p157rlhmfst/RUU_...1.23.3504.07_M2_relase_257541_signed.exe.html
or this
http://fileom.com/wh7lz26xjh0i/RUU_....24A.3504.31_M_release_266665_signed.exe.html
but first relock your bootloader

rzr86 said:
can you post your firmware version?
Click to expand...
Click to collapse
thanks bro

AnGrY DuDe said:
thanks bro
Click to expand...
Click to collapse
did it work?

rzr86 said:
did it work?
Click to expand...
Click to collapse
no not worked ...but i didn't relock it.i didn't think its problem for relock it.but i try for relock it.i forgot to relock it

AnGrY DuDe said:
no not worked ...but i didn't relock it.i didn't think its problem for relock it.but i try for relock it.i forgot to relock it
Click to expand...
Click to collapse
you have to relock the bootloader
otherwise the ruu won't work

rzr86 said:
can you post your firmware version?
Click to expand...
Click to collapse
bro i got error 130

AnGrY DuDe said:
bro i got error 130
Click to expand...
Click to collapse
error 130 is a model id error
do you have a sensation/sensation 4G/sensation XE device?
post the out put from this command
fastboot getvar all
don't show your imei and serial number

rzr86 said:
error 130 is a model id error
do you have a sensation/sensation 4G/sensation XE device?
post the out put from this command
fastboot getvar all
don't show your imei and serial number
Click to expand...
Click to collapse
how to check it?

AnGrY DuDe said:
how to check it?
Click to expand...
Click to collapse
its pg58130 htc
i have all RUU for ALL HTC devices.whats the name of the ruu for htc sensaton 4G? i think its 4g

Problem during back to stock rom S4

Today I tried back from CyanogenMod 12 to stock rom in HTC ONE S.
One S 1.5, TWRP 2.8.5, HBoot 2.15, S-ON. Cid T-MOB101
During this procedure: https://translate.google.pl/translat...OMu&edit-text=
In this 6. point "6. Turn the phone back - no, it's not over yet, but the worst is behind us. We run suitable for our model and already RUU.exe normally carry out the procedure ROM Upgrade Utility - Using the instructions of the installer. ". I used RUU from this link https://drive.google.com/folderview?id=0B1IYElPvrGZrdGR6SXIwYjgxd1U&usp=sharing#list
Installer (RUU) show me error [140]: error bootloader version.
After I close installer phone was reboot and I see only bootloader - On the top I see TAMPERED RELOCKED Security Warning)
I can not run Android now
Could you help me? Please
Update> I unlock it using fastboot flash unlocktoken Unlock_code.bin, but what is next?

noiserobert said:
Today I tried back from CyanogenMod 12 to stock rom in HTC ONE S.
One S 1.5, TWRP 2.8.5, HBoot 2.15, S-ON. Cid T-MOB101
During this procedure: https://translate.google.pl/translat...OMu&edit-text=
In this 6. point "6. Turn the phone back - no, it's not over yet, but the worst is behind us. We run suitable for our model and already RUU.exe normally carry out the procedure ROM Upgrade Utility - Using the instructions of the installer. ". I used RUU from this link https://drive.google.com/folderview?id=0B1IYElPvrGZrdGR6SXIwYjgxd1U&usp=sharing#list
Installer (RUU) show me error [140]: error bootloader version.
After I close installer phone was reboot and I see only bootloader - On the top I see TAMPERED RELOCKED Security Warning)
I can not run Android now
Could you help me? Please
Update> I unlock it using fastboot flash unlocktoken Unlock_code.bin, but what is next?
Click to expand...
Click to collapse
to use a RUU your bootloader need be relocked
---------- Post added at 06:28 PM ---------- Previous post was at 06:26 PM ----------
You can try rumrunner to S-OFF and after that try with Ruu

JavierG123 said:
You can try rumrunner to S-OFF and after that try with Ruu
Click to expand...
Click to collapse
I tried it but it not work. I think because it work only with stock rom
How back t stock rom with s-on?

noiserobert said:
I tried it but it not work. I think because it work only with stock rom
How back t stock rom with s-on?
Click to expand...
Click to collapse
Flash the proper RUU for your CID, you don't need S-Off for that.
Sent from nowhere over the air...

@thanks Rapier
I describe as I did it in detaliled:
1. Run fastboot oem readcid and fastboot getvar version-main and receive inforamtion Cid T-MOB101 3.16.111.11
2. Downlaod proper (??) RUU RUU_Ville_U_ICS_40_S_TMO_DE_2.38.111.10_Radio_1.09es.50.02.07_2_10.09d.50.04L_ver2_release_287723_signed.exe . Is it proper for my device One S 1.5, TWRP 2.8.5, HBoot 2.15, S-ON. Cid T-MOB101?
3. Run fastboot oem lock
4. Run fastboot erase cache
5. Run RUU (from 1 point)
6. RUU inform me that will be install oddest (something like 2.38.111.xx - I dont remember all number) version then is on my ONE S (3.16.111.11), I accept it
7. RUU reboots my phone, and HTC starts and on blac background was logo htc
8. After few minutes RUU installer show me error [140]: error bootloader version.
9. I accept RUU and it close and my phone reboot to bootloader On the top I see TAMPERED RELOCKED Security Warning)
Where is wrong ?
Plese help me

I resolve it
1. Install a Viper 2.20
2. Use rumrunner.us to set your phone S-OFF

noiserobert said:
I resolve it
1. Install a Viper 2.20
2. Use rumrunner.us to set your phone S-OFF
Click to expand...
Click to collapse
And the RUU works?

I do not RUU because I did S-Off and it was fantastic
I go to Maximums HD (based on stock rom)

noiserobert said:
I do not RUU because I did S-Off and it was fantastic
I go to Maximums HD (based on stock rom)
Click to expand...
Click to collapse
but... for install Maximums HD you don't need S-OFF....

JavierG123 said:
but... for install Maximums HD you don't need S-OFF....
Click to expand...
Click to collapse
Of course you MUST have S-OFF to install Maxiums HD. Please read about it!

noiserobert said:
Of course you MUST have S-OFF to install Maxiums HD. Please read about it!
Click to expand...
Click to collapse
i'm sorry men. my bad

No problem
Only one problem is that not support beatsaudio

noiserobert said:
No problem
Only one problem is that not support beatsaudio
Click to expand...
Click to collapse
in android development or other section like that here in the forum... exist a flasheable zip to get on any device beats audio and other features...

I am wrong, this rom support BA! It is fantastic!

HTC ONE Unlocked OTA 1.57.617.41 Download

Latest HTC One A9 Unlocked Edition OTA
OTA_HIA_AERO_UL_M60_SENSE7GP_ATT_MR_NA_Gen_Unlock_1.57.617.41-1.57.617.32_release_480058icet4xqcwsg0zr0g.zip
http://d-h.st/YwvS

techlogik said:
Latest HTC One A9 Unlocked Edition OTA
OTA_HIA_AERO_UL_M60_SENSE7GP_ATT_MR_NA_Gen_Unlock_1.57.617.41-1.57.617.32_release_480058icet4xqcwsg0zr0g.zip
http://d-h.st/YwvS
Click to expand...
Click to collapse
I have European version 1.56 , how can I install this?
Sent from my HTC One A9 using XDA-Developers mobile app

If you want to install this update you need to S-OFF your phone and change CID and MID using fastboot command from download mode:
fastboot oem writecid 11111111
fastboot oem writemid 2PQ912000
Then you will be able to flash US firmware.

Anybody have a valid TRWP system image for 1.57.617.32?
I took one but it still failed the verity check.

NuShrike said:
Anybody have a valid TRWP system image for 1.57.617.32?
I took one but it still failed the verity check.
Click to expand...
Click to collapse
Oh well, I flashed the .32 RUU and restored data from TWRP/FlashFire, flash this update, and I think I'm done.

NuShrike said:
Oh well, I flashed the .32 RUU and restored data from TWRP/FlashFire, flash this update, and I think I'm done.
Click to expand...
Click to collapse
Did you use FlashFire to only restore data? Just curious.

qooob said:
If you want to install this update you need to S-OFF your phone and change CID and MID using fastboot command from download mode:
fastboot oem writecid 11111111
fastboot oem writemid 2PQ912000
Then you will be able to flash US firmware.
Click to expand...
Click to collapse
This OTA will not flash if you're superCID. You must use the US unlocked or developer CID specifically to flash this OTA (BS_001 or BS_002).
The RUU will flash if you are superCID, but 1.57.617.41 RUU hasn't been officially (or unofficially that I'm aware of) released yet.

eelpout said:
Did you use FlashFire to only restore data? Just curious.
Click to expand...
Click to collapse
I used FlashFire generated backup in TWRP to restore data.
Of course internal-storage was still wiped, but I manually back that up these days (with SyncMe app), and don't put anything there, if possible.

qooob said:
If you want to install this update you need to S-OFF your phone and change CID and MID using fastboot command from download mode:
fastboot oem writecid 11111111
fastboot oem writemid 2PQ912000
Then you will be able to flash US firmware.
Click to expand...
Click to collapse
Will it really work? My phone will work properly? How to get S-OFF? Will S-On be back after I flash? Do I need to root?

It worked for me.
To get S-Off I used SunShine S-Off. You can disabled S-Off by running command `fastboot oem writesecureflag 3`. You need root to run SunShine.
After getting S-Off be careful not to mess HBOOT otherwise your phone will be hard-bricked and non-recovereable at home (you would need a programmer (device)).

qooob said:
If you want to install this update you need to S-OFF your phone and change CID and MID using fastboot command from download mode:
fastboot oem writecid 11111111
fastboot oem writemid 2PQ912000
Then you will be able to flash US firmware.
Click to expand...
Click to collapse
Will I get OTA?

MVince25 said:
Will I get OTA?
Click to expand...
Click to collapse
Yes, you should. You will need to relock the bootloader and s-on to make OTA work as far as I remember.

Convert UHL to UL
Hi, I have an European Unlocked A9, stock firmware 1.56.401.70. Also, I am S-off, SuperCid, and my device has 2GB of RAM. Can I use US Unlocked RUU to convert my HTC? I want to use 1.57.617.52 software. Is it ok to convert? The US unlocked version has 3GB RAM... Thanks !

qooob said:
Yes, you should. You will need to relock the bootloader and s-on to make OTA work as far as I remember.
Click to expand...
Click to collapse
bro OTA no need S-ON just relock bootloader