im new about moto flash before it was ok just for some issue i went for it
i was flashing moto xt926 via utility pc method
but during flashing now its not working fine im searching many ideas from google but no one has solution
plz help me any way to bring it ok??
Seems like your bootloader is locked and you are either trying to downgrade of flash a custom image. You will need to unlock your bootloader first.
abidalimallah said:
im new about moto flash before it was ok just for some issue i went for it
i was flashing moto xt926 via utility pc method
but during flashing now its not working fine im searching many ideas from google but no one has solution
plz help me any way to bring it ok??
Click to expand...
Click to collapse
Exactly what is wrong with the device and what were you doing when it acted up?
if mobile are not on ok condition its just show only hanged on logo nd others matter also like unfortunately application closed so we cant unlock bootloader
Related
Hey Guys, I decide to unlock the bootloader and root my Moto G so i start to read about it and preparing everything to do it in my pc (drivers, etc)
But when i start to read de Resource Guide Thread in the General forum i read something that confuse me specifically in the Root part that says:
"If you do not have or do not wish to unlock your bootloader then you can opt for @oasoas014 's method ( http://forum.xda-developers.com/showthread.php?t=2583652 ) of bootloader downgrade. You may also visit @Cooptx's more detailed guide ( http://forum.xda-developers.com/showthread.php?t=2585755 ) . Note, with the most recent recoveries, you do not need to downgrade your bootload"
But reading the @Cooptx's method says that need unlock bootloader, i really dont understand the @oasoas014 's method but reading all the comments says also that i need unlock bootloader.
So im kinda confuse here, is that im not reading well? or i just need to unlock it? someone can give me a strait answer?
You must unlock bootloader if you want root, there is not other solution for moto g atm. Maybe in future there will be an exploit to root bypassing bootloader like on moto x but not now.
Thanks you, the info is kinda confuse, im gonna put me in to work. Hope eveything goes well
bozzett0 said:
Thanks you, the info is kinda confuse, im gonna put me in to work. Hope eveything goes well
Click to expand...
Click to collapse
It's not that much work and Motorola makes it really easy to unlock the bootloader If you still need some help or run into trouble let us know!
hey
i tried to unlock bootloader via motorola web site but it says my device does not qualify for unlocking
tried flashing recoveries, root zips and updated to official kitkat, but still does not work
phoned motorola support and they said motorola doesn't guarantee bootloaded getting unlocked, it depends on luck
any suggestion?
Moto XT1033 Dual 16gb BR
pedrofortunato said:
hey
i tried to unlock bootloader via motorola web site but it says my device does not qualify for unlocking
tried flashing recoveries, root zips and updated to official kitkat, but still does not work
phoned motorola support and they said motorola doesn't guarantee bootloaded getting unlocked, it depends on luck
any suggestion?
Moto XT1033 Dual 16gb BR
Click to expand...
Click to collapse
Did they use the word " luck "?
Sent from Samsung Chat
jaspreet997 said:
Did they use the word " luck "?
Sent from Samsung Chat
Click to expand...
Click to collapse
not that word but she said it might work as it might not work, and there's nothing me or motorola could do about it
Hello, I'm kind of a noob on these things but here we go:
My Razr is stuck on the red Motorola logo (the boot animation when you turn on the phone) I believe this is what you call "bricked" (?).
I found out some methods here about downloading an XML file and replacing it but where can I find this file? And where do I need to replace it, it is on the firmware file, right? I wanted to get a USA firmware because in my country (Mexico) the KitKat update hasn't been liberated for us and I want to be able to update it.
A friend told me that if I put a firmware from USA it would ask me to update but to do this I need to unlock the bootloader.
I saw a tutorial on unlocking it with Motopocalypse but to do this I need to put the phone on Debugging Mode and I can't do that since my phone is bricked.
Is there a way to unbrick my phone and being able to install KitKat?
If not, of course my priority is to just unbrick it asap regardless if it is with KitKat or JB :/
Thank you so much in advance.
First, you need to tell us exactly what you did that "bricked" it. And I say "bricked" because if you can get to the Motorola logo, it probably isn't really bricked.
Either way, your friend's advice sounds like a bad idea to me. The US firmware is meant for the xt926, which uses Verizon's network. You should either wait for firmware to be released in your region or use a custom ROM (something you can do if you end up unlocking the bootloader).
Do the same: http://forum.xda-developers.com/showthread.php?p=57063750 doesn't care if your device is "bricked"
killrhythm09 said:
First, you need to tell us exactly what you did that "bricked" it. And I say "bricked" because if you can get to the Motorola logo, it probably isn't really bricked.
Either way, your friend's advice sounds like a bad idea to me. The US firmware is meant for the xt926, which uses Verizon's network. You should either wait for firmware to be released in your region or use a custom ROM (something you can do if you end up unlocking the bootloader).
Click to expand...
Click to collapse
When I turn it on it is stuck on the red Motorola logo, it goes like that for hours until battery is dead.
I can go into the bootloader options (when you press vol +/- and power) and I have tried wiping all the data to factory settings but the result is the same.
Sorry if I'm using the wrong terminology.
DorianX said:
Do the same: http://forum.xda-developers.com/showthread.php?p=57063750 doesn't care if your device is "bricked"
Click to expand...
Click to collapse
Can I do that even if I have never unlocked my bootloader?
Update:
I tried flashing with my carrier firmware and deleting the proper lines on the .xml file, then opened with RSD but it shows:
"Failed flashing process 14/21 flash boot "boot_signed" -> Phone returned FAIL"
And on the Fastboot manu on the phone it shows:
"Partition (boot) Security Version Downgraded"
"preflash validation failed for boot"
Please help me
mauber said:
Can I do that even if I have never unlocked my bootloader?
Click to expand...
Click to collapse
If you never upgraded to KK you don't need to have unlocked bootloader, but why don't you unlock your bootloader? I see only benefits with.
DorianX said:
If you never upgraded to KK you don't need to have unlocked bootloader, but why don't you unlock your bootloader? I see only benefits with.
Click to expand...
Click to collapse
Is not that I don't want to, it is that I can't. I'm having trouble flashing the firmware.
Just follow the tutorial http://www.grupoandroid.com/topic/71673-instalar-un-firmware-por-fastboot-en-imágenes/ and use Claro Puerto Rico firmware, then take the OTA
DorianX said:
Just follow the tutorial http://www.grupoandroid.com/topic/71673-instalar-un-firmware-por-fastboot-en-imágenes/ and use Claro Puerto Rico firmware, then take the OTA
Click to expand...
Click to collapse
I did but it got stuck on the "boot_signed" step (RSD lite), deleting that line on the XML file and then it showed the "system_signed" step error, deleted that line on the XML and it apparently flashed successfully but the phone is back to where it was before, stuck on the red Motorola logo boot animation.
i want to relock my MOTO G bootloader. I have already tried many tutorials, but i cant seem get it work. No matter what i do, i always get this error on cmd "sst lock failure" and in device "failed to validate system image". I downloaded firmware from google using my version of moto g KXB20.9-1.8-1.4. I really need to get this to work, so i hope someone can help me.
hi guys just wondering if anyone knows how to get a moto g 2015 (16gb) out of bootloader as it is stuck ? the bootloader is locked and i cant get it unlocked due to oem unlock turned off in settings. the phone will not boot up. This happened during a failed attempt of root (big mistake). Would be a big help if anyone knows.
Just reflash firmware images
Found here on xda forum
pcullenlad93 said:
hi guys just wondering if anyone knows how to get a moto g 2015 (16gb) out of bootloader as it is stuck ? the bootloader is locked and i cant get it unlocked due to oem unlock turned off in settings. the phone will not boot up. This happened during a failed attempt of root (big mistake). Would be a big help if anyone knows.
Click to expand...
Click to collapse
What root method were you attempting? Kingroot?
MrTooPhone said:
What root method were you attempting? Kingroot?
Click to expand...
Click to collapse
Yes i was using kingroot without an unlocked bootloader. Idiotic really. Do you have any solutions ?
Just see this thread, -
http://forum.xda-developers.com/showthread.php?t=3369939
Another user had the same problem. The only difference in your case would be your firmware (XT abcd 1/2gb) and no. of sparsechunk files present (must flash them all).
Broadcasted from Zeta Reticuli
Hey Guys
I'm new here and i don't know if this is the right place to post, if so, pls let me know
My Motorola One Fusion (XT2073-2) is bricked, i can only access the fastboot mode and i've tested all the roms i could, but it didn't work ( it shows preflash validation error ) and i couldn't find one for my bootloader "MBM-3.0-astro_retail-d88b69237fd-220323", can anyone help me find what region is that bootloader ?
It will make me very happy, i am searching for it for months