Related
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
cervantesjc said:
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
Click to expand...
Click to collapse
Take out the battery, wait a full minute. put it back in and the case back together without inadvertantly hitting either the power or up/down keys. Now press the down key. While holding it down, hold down the power key. If that doesn't put you into download mode, you have done the impossible. These phones are (almost) impossible to brick.
I have seemed to have done the something similar as I was trying to reflash with ODIN and the phone went black, I left it alone for several minutes and now when I try to turn the phone on I just have a graphic with a phone and a computer with a little triangle with an exclaimation mark in the middle and nothing else happens.
djallen1 said:
Take out the battery, wait a full minute. put it back in and the case back together without inadvertantly hitting either the power or up/down keys. Now press the down key. While holding it down, hold down the power key. If that doesn't put you into download mode, you have done the impossible. These phones are (almost) impossible to brick.
Click to expand...
Click to collapse
I really think i have the done impossible, there is no download mode nor recovery mode, (well, this has never worked) i don't know what to do, i'm getting my phone replaced.
I tried using adb on my computer, but the device is not found, my computer doesn't recognize my device.
cervantesjc said:
I really think i have the done impossible, there is no download mode nor recovery mode, (well, this has never worked) i don't know what to do, i'm getting my phone replaced.
I tried using adb on my computer, but the device is not found, my computer doesn't recognize my device.
Click to expand...
Click to collapse
UGH
I have the SAME problem...but I always had download AND recovery working...
after a few flashes in a short span...they just dissapeared...
screen just turns black after the "S" logo animation....
ADB can't see the device either
Same Here Too :-|
i've been searching and trying to get into dowload mode for a week and i't not working. i can hear it boot up but just stuck on the darn Vibrant screen
philthyman21 said:
i've been searching and trying to get into dowload mode for a week and i't not working. i can hear it boot up but just stuck on the darn Vibrant screen
Click to expand...
Click to collapse
I was there, use Odin to reflash to stock.
huh
djallen1 said:
Take out the battery, wait a full minute. put it back in and the case back together without inadvertantly hitting either the power or up/down keys. Now press the down key. While holding it down, hold down the power key. If that doesn't put you into download mode, you have done the impossible. These phones are (almost) impossible to brick.
Click to expand...
Click to collapse
i beg to differ
nothing is working for me either
So I went to This Site pathikshah. com /blog / install-android-2-2-froyo-galaxy-s/ (sorry about the spaces new user and xda wont let me post links, not spamming honest), I did exactly as it said it was working as planned until it reset after install. First instead of the vibrant screen coming up it now says:
Galaxy S
GT-I9000
Then It goes to:
Android System Recovery <3e>
on that screen it says twards the bottom:
update media please wait
E:Cant mount /dev/block/mmcblk0p1
(Invalid argument)
E:copy_dbdata_media:Cant mount SDCARD:
your storage not prepared yet, please use UI me
nu for format and reboot actions.
copy default media content failed.
so when I try to scroll through the recovery menu I have to push vol Up to scroll down
also it does nothing when i press the ok button (power button), unless I hold it down then it resets and goes back to the same recovery screen
I rooted the samsung galaxy s then added a rom and the rom is crashing my phone I've tried aboslutely everything don't know what else to do.
i also have a problem
i have install ROM manager and make a back up
went i try to recovery my backup it give me first the original recovery mode i know i have to select update.zip to access the clockworkmod recovery (ver 2.5.1.2 last one) i use the option restore and start it
now my phone just reboot in recovery mode
i'm looking if some one have a working ROM backup
tnx for your help
Drago.
cervantesjc said:
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
Click to expand...
Click to collapse
Read instructions and download files from thread here:
http://forum.xda-developers.com/showthread.php?t=734475
Watch this video:
http://www.youtube.com/watch?v=AnY7P14JSWQ
Good luck
fstathes said:
Read instructions and download files from thread here:
http://forum.xda-developers.com/showthread.php?t=734475
Watch this video:
http://www.youtube.com/watch?v=AnY7P14JSWQ
Good luck
Click to expand...
Click to collapse
Thank you for the video link. I was up to that point unable to get the download/shoveling droid screen. Now I'm in the process of finally getting the phone back to stock after downloading the t-mobile update that cam through and bricked the phone.
no downloading mode
Hi i was hoping this will help me to reenabeling my bricked samsung. But i cant get it in to downloanding mode. the 3 button way isnt working and the way showed in the movie neither. Is there an other way to get the phone back to work?
I have tried all the methods posted here as well as many others from the link posted above. But to no avail.
I did everything successfully up until the reboot. Whereupon, it would not start. No amount of button combination helped me. And taking out the battery pack is no help either. It just won't start. I could use any advice.
Thank you.
I'm in the same boat now, attempted to odin back to stock and now I have a brick. It's just blank, I cant get it into download or recovery mode using any method described.
Is my only shot the jig method I've read about now?
EDIT
Nevermind, I got it. Pulled the battery, replaced it, held down both power buttons, inserted usb (already plugged in comp w/ odin open), boom..entered download mode and flashed..
cervantesjc said:
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
Click to expand...
Click to collapse
Remove the battery and insert it again, now keep pressing the volume buttons and connect the USB cable to your phone, the usb cable must be connected to your pc first.
hey, i also experienced bricking my phone. is there a step by step process how to unbrick it? i need urgent help please. by the way im using samsung galaxy s 4g (
after i have gone to download mode. my computer cannot recognize my device. help me please.
to the post above me. Sounds like you have a bad usb data cable. Grab you a new cable online and you should be good to go
I'm assuming you have already downloaded the drivers to your computer. Sasmung.com will have them
I cannot seem to get my gtab to boot anymore. I was in the middle of flashing it a week ago and I hit the power button in the middle of the process, and it shut off. I have been unable to boot it beyond a black screen since then.
I tried to put cwmod on the microsd card and hold power + volume up while booting but nothing happens.
Does anyone have any ideas on how to fix it?
Yeah - I bricked mine as well trying to get rid of the birds. Will post link to my fix shortly.
ensign.fodder said:
Yeah - I bricked mine as well trying to get rid of the birds. Will post link to my fix shortly.
Click to expand...
Click to collapse
Try this --> http://forum.xda-developers.com/showthread.php?t=861950
unhappyrobot said:
I cannot seem to get my gtab to boot anymore. I was in the middle of flashing it a week ago and I hit the power button in the middle of the process, and it shut off. I have been unable to boot it beyond a black screen since then.
I tried to put cwmod on the microsd card and hold power + volume up while booting but nothing happens.
Does anyone have any ideas on how to fix it?
Click to expand...
Click to collapse
Same thing with me, nothing but a black screen, the method posted on the link below really worked for me give it a try.
ensign.fodder said:
Try this --> http://forum.xda-developers.com/showthread.php?t=861950
Click to expand...
Click to collapse
Awesome, thanks guys nvflash did the trick!
help!
I had a very similar issue but I don't see how nvflash will help. My tablet refuses to load at all after a failed rom attempt. I don't get the load screen and I definitely can't do the power + volume button reset.
Any assistance would be greatly appreciated!
theclosh said:
I had a very similar issue but I don't see how nvflash will help. My tablet refuses to load at all after a failed rom attempt. I don't get the load screen and I definitely can't do the power + volume button reset.
Any assistance would be greatly appreciated!
Click to expand...
Click to collapse
Note that nvFlash is power - volume, not power + volume that's used to get into recovery mode. while using nvflash, you need to have tablet to be connected to the pc in order to run nvflash. when power - volume is pressed, screen appears to be turned off on the tablet, until you run nvflash.bat on pc to push the stock rom. Hope that helps..
The black screen after the "birds logo" or even when you power on and don't get the logo is when the tablet is stuck in APX mode. It is hard to tell the difference between tablet off and tablet on in apx mode.
The best thing to do is plug in USB to the PC and see if the tablet shows up as a device (check device manager on Windows). If there is nothing popping up in Dev. Manager then try pressing the power button again to turn it on. Even though the screen still looks off, the device should come up and you can access it with nvflash.
As others have said, using nvflash to get back to stock, or even just flashing CWM recovery will sometimes work.
So I was following a tutorial on how to put stock fw on the t959v but the files he provided was not for the t959v but the vibrant. So I got the phone stuck into boot loop, after hours of trying to get out of it it finally switched from boot looping to an alternate download mode. I didn't even need to hold the keys to get it into download mode I just had to turn on the phone.
Anyways I followed this thread
http://forum.xda-developers.com/showthread.php?t=1603656&highlight=firmware+upgrade+fail
which lead me to this thread
http://forum.xda-developers.com/showpost.php?p=21953878&postcount=2
And that got me out of the alternate download mode. But now its stuck at boot loop again!
I keep trying using odin but it always fails or goes into another boot loop. Please help, this isn't even my phone.
Okay now the phone is stuck in a constant boot loop and I can't get it into download mode. The amount of threads I read don't help at all because the solution is in download mode which I can't get into.
PLEASE HELP SOMEBODY!
Follow and Download lumins30 heimdall one click stock
solrac1212 said:
Follow and Download lumins30 heimdall one click stock
Click to expand...
Click to collapse
Please please give bhundven the namesake for the One-Click as he made it for us. I wrote the guide ONLY. I don't want to see it called lumin30's Heimdall One-Click. Thanks!
I did use heimdall, but thats what got my phone in a constant boot loop. Now it won't even boot up in download mode. I think it may be bricked. What can I do now?
You tried the three button combo to get in download mode?
lumin30 said:
You tried the three button combo to get in download mode?
Click to expand...
Click to collapse
three button? I tried the volume up+down and inserting the USB cable. It goes straight to the charging screen then a black screen, then back to the charging screen.
Ramzi619 said:
three button? I tried the volume up+down and inserting the USB cable. It goes straight to the charging screen then a black screen, then back to the charging screen.
Click to expand...
Click to collapse
That's not the way. Pull battery, plug phone into computer via usb, hold down BOTH volume buttons, insert battery(while still holding down the volume buttons). That will get you to DL mode.
hechoen said:
That's not the way. Pull battery, plug phone into computer via usb, hold down BOTH volume buttons, insert battery(while still holding down the volume buttons). That will get you to DL mode.
Click to expand...
Click to collapse
Tried it, no luck :/ Same thing happens I see the charging screen (grey'd out) then it goes black, and then I see the charging screen again.
Ramzi619 said:
three button? I tried the volume up+down and inserting the USB cable. It goes straight to the charging screen then a black screen, then back to the charging screen.
Click to expand...
Click to collapse
Actually this will work as long as you are holding the buttons and plugging the phone in at the same time and wait til the splash screen gets bright then let go...there are three different ways to get into download mode...you and also do it from cwm screen too...
Back on Barebones
Anymore input? I'd really like to get those phone running again, seeing as it's not mine. I'm guessing it's bricked since I can't get it into download mode.
Finally got it to work! Got it into download mode by holding down the volume down button and power button while inserting the battery. The mistake was holding down both volume keys, I guess that only works sometimes. After download mode I downloaded the file
"java -jar T959VUVKJ6_STOCK-UVKJ6-One-Click.jar" located in Lumins signature (second link) and flashed, after that the phone started boot looping again. So I tried it again this time clicking "flash bootloaders" and voila! The phone booted up and now it works!
Thanks everyone for the help! I'll be sure to click the thanks button!
Hope this post helped out other people with my problem!
Good job!
Update: I messed around with fastboot a bit more and managed to brick it entirely. It's stuck in a boot loop now -- it won't even power off -- and there's nothing I can do about it, so I just took it in to get it replaced.
Hey guys, I know this thread is very similar to others that have been posted, but I've already looked through them and haven't found anything that works for me yet.
My phone was already running rooted stock with TWRP for the recovery. I tried flashing CM10.2 but it was for the wrong model (I downloaded D802 but my phone is of course D801. Oops). Upon reboot, the LG splash screen appeared and then immediately went to a black screen saying
Code:
Fastboot mode started
udc_start()
When I attempt to turn the phone off it just reboots to that screen again. I am still able to use fastboot, and have tried wiping the phone and re-flashing TWRP. It doesn't throw any errors but I still can't actually boot into recovery. I can't use fastboot to flash a new ROM onto the phone though, since it doesn't like .zip archives apparently, and I can't find a .img file of a ROM anywhere.
When I try to use flashtool as described here http://forum.xda-developers.com/showthread.php?t=2541087 it says the device is not connected (probably because it's not in download mode?).
Any help would be much appreciated. All I need to do is get into recovery, it shouldn't be this hard.
That's the same error I got a few days ago when I mis-flashed a new recovery (oops. and be careful when you use 'dd', because a typo can nuke your recovery). I'd get that error message if I tried to boot into recovery, but if I just let the phone boot, it would boot fine. It was easy to fix, but that was because I just used Terminal Emulator to re-flash recovery.
Your best bet might be to go back to stock. Try this thread.
similar issue, but not quite
antinorm said:
That's the same error I got a few days ago when I mis-flashed a new recovery (oops. and be careful when you use 'dd', because a typo can nuke your recovery). I'd get that error message if I tried to boot into recovery, but if I just let the phone boot, it would boot fine. It was easy to fix, but that was because I just used Terminal Emulator to re-flash recovery.
Your best bet might be to go back to stock. Try this thread.
Click to expand...
Click to collapse
I'm not in a boot loop, as I can power off and it will stay off. But I am stuck at the Fastboot mode started screen (I can't get download mode to come up). When I do try to get into download mode it flashes for a second, but then goes back to the fastboot mode screen.
I'm hoping to find an image that I can use the fastboot flash recovery command with to re-write my recovery partition.
Any suggestions on where to find this image file? Or am I going down the wrong path?
Thanks,
Joseph
Did you get it to work? I am in the same mode.
I'm stuck here as well. Looking for a fix
Did you guys find a fix? I need help with this...
similar thing here with me
any solution
i cant boot at all, not into download mode, nor recovery,
got this too because i was installing a note3 rom to my d800, acciodentally of coarse. i managed to boot to twrp by doing the power and volume down technique. and from twrp i restored my recent backup
To anyone still stuck in this situation (reboot loop, no recovery etc):
- Unplug the phone from the USB cable
- Hold down the power until the phone turns off
- Wait a couple of minutes with the phone off
- Now hold power and volume down buttons
- When LG logo appears - release power and volume down and hold them again
- When you see a white screen with "reset to default instructions" -- do what it says, meaning pressing the power button a couple of times
THAT should work.
TheBestEver said:
All I did was hold power and volume down until the LG logo came on (not when it flashed for just a split 2nd) and then pressed and held power down again and it came to the white screen. Then I pressed power 3 times and got into recovery
Click to expand...
Click to collapse
Which recovery? TWRP?
Swizzle82 said:
Which recovery? TWRP?
Click to expand...
Click to collapse
Cool I wonder if that combo could be used to get into stock kk recovery?
---------- Post added at 09:14 PM ---------- Previous post was at 09:04 PM ----------
Just tried. Nope
lthnnpwr said:
To anyone still stuck in this situation (reboot loop, no recovery etc):
- Unplug the phone from the USB cable
- Hold down the power until the phone turns off
- Wait a couple of minutes with the phone off
- Now hold power and volume down buttons
- When LG logo appears - release power and volume down and hold them again
- When you see a white screen with "reset to default instructions" -- do what it says, meaning pressing the power button a couple of times
THAT should work.
Click to expand...
Click to collapse
What if I'm stuck on a black screen no matter what buttons I press.
Unable to do that.
lthnnpwr said:
To anyone still stuck in this situation (reboot loop, no recovery etc):
- Unplug the phone from the USB cable
- Hold down the power until the phone turns off
- Wait a couple of minutes with the phone off
- Now hold power and volume down buttons
- When LG logo appears - release power and volume down and hold them again
- When you see a white screen with "reset to default instructions" -- do what it says, meaning pressing the power button a couple of times
THAT should work.
Click to expand...
Click to collapse
I'm trying to do that, but when I begin to hold the buttons my screen only three silver vertical bars appear on the left side of the screen.
FluffyZ said:
I'm trying to do that, but when I begin to hold the buttons my screen only three silver vertical bars appear on the left side of the screen.
Click to expand...
Click to collapse
does not work for me any other solution????
stuck in fastboot mode
i did the factory hard reset but it returns to fastboot mode
any help?
FluffyZ said:
I'm trying to do that, but when I begin to hold the buttons my screen only three silver vertical bars appear on the left side of the screen.
Click to expand...
Click to collapse
berceniqgil said:
does not work for me any other solution????
Click to expand...
Click to collapse
hssn a said:
i did the factory hard reset but it returns to fastboot mode
any help?
Click to expand...
Click to collapse
Not sure if you've tried this. To power off fully, press and hold the volume down and power buttons. Do not let go of the buttons. The phone should turn off and the LG logo should appear. Continue holding until after the LG logo disappears. The phone should be fully off and won't turn back on at this point. If you don't see the LG logo, just keep the buttons pressed for about 10-15 seconds and you should be fully powered off by then. You should be able to enter download mode from here (press and hold volume up button while plugging in USB from computer). If you are able to enter download mode, then use the LG mobile support tool in my thread and follow the instructions. This should flash the latest stock system to your phone. If that doesn't work, I have a link to an alternate method for flashing the latest stock system on your phone. Hope this helps.
Howie Dub said:
Not sure if you've tried this. To power off fully, press and hold the volume down and power buttons. Do not let go of the buttons. The phone should turn off and the LG logo should appear. Continue holding until after the LG logo disappears. The phone should be fully off and won't turn back on at this point. If you don't see the LG logo, just keep the buttons pressed for about 10-15 seconds and you should be fully powered off by then. You should be able to enter download mode from here (press and hold volume up button while plugging in USB from computer). If you are able to enter download mode, then use the LG mobile support tool in my thread and follow the instructions. This should flash the latest stock system to your phone. If that doesn't work, I have a link to an alternate method for flashing the latest stock system on your phone. Hope this helps.
Click to expand...
Click to collapse
Thanks for ur idea , but the point is that everything lead me to fastboot even when I'm trying (volume up + usb ) it also lead me to fastboot i have im every buttons and others until i finally found this thread :http://forum.xda-developers.com/showthread.php?t=2477595 . it's a simple way to eliminate the fastboot that u can go to download mode
---------- Post added at 03:53 AM ---------- Previous post was at 03:23 AM ----------
Hey guys, for people who are stuck in fastboot mode there you go a simple way to get back into download mode : http://forum.xda-developers.com/showthread.php?t=2477595
then u have to flash a kdz file via flashtool after connecting into download mode
Those two threads tell you what to do
Jb : http://forum.xda-developers.com/showthread.php?t=2432476
Kk :http://forum.xda-developers.com/showthread.php?t=2664028
lthnnpwr said:
To anyone still stuck in this situation (reboot loop, no recovery etc):
- Unplug the phone from the USB cable
- Hold down the power until the phone turns off
- Wait a couple of minutes with the phone off
- Now hold power and volume down buttons
- When LG logo appears - release power and volume down and hold them again
- When you see a white screen with "reset to default instructions" -- do what it says, meaning pressing the power button a couple of times
THAT should work.
Click to expand...
Click to collapse
I hve tried this but after i confirm the reset it staight away takes me to the black screen
Hi,
Really need your help, after I updated my firmware using Odin, updated BL, AP, CP, CSC, my tab cannot boot up stuck in logo. Doing the Power + volume up leads me to different screen now.
What must I do? Pleasssee help. Added the pic, after doing hard reset (power + vol up)
I cannot connect back to Odin also. Always setup connection failed.
Please help. I really messed up big time :'(
Thank you all in advance.
Well let the battery drain then boot up works or not?
LR7875 said:
Well let the battery drain then boot up works or not?
Click to expand...
Click to collapse
I haven't tried it yet, waiting also for the battery to be drain, it always boot loop but until samsung logo only..
JayR0503 said:
I haven't tried it yet, waiting also for the battery to be drain, it always boot loop but until samsung logo only..
Click to expand...
Click to collapse
Hi, can this be repaired by service center?
If warranty still here, they should repair for you, although most likely they will go ahead and replace the motherboard.
LR7875 said:
If warranty still here, they should repair for you, although most likely they will go ahead and replace the motherboard.
Click to expand...
Click to collapse
Oh my bad.. it is not under warranty anymore, this will cost me a lot right? Is there any chance of connecting back to download mode? I cannot access it anymore, it will show connect to PC only but Odin cannot setup connection though it is added successfully.
Thanks.
have you download the updated odin?
Try with latest Odin, patched Odin, or even running Heimdall(google 'Heimdall samsung') in an Linux virtualbox.
There is a procedure involving complete shut down, then holding certain buttons and somehow (with your fifth hand) connecting cable between device and PC. Probably with Odin already running on PC.
I'm sorry, I don't remember where I saw it described. I think I used it on my SM-T290, so start by checking the T290 and T295 threads.
ykkfive said:
have you download the updated odin?
Click to expand...
Click to collapse
Hi, thanks I haven't downloaded the latest version but I use the 3.14.4.. version. I will try to find the latest one. Thanks.
J.Michael said:
There is a procedure involving complete shut down, then holding certain buttons and somehow (with your fifth hand) connecting cable between device and PC. Probably with Odin already running on PC.
I'm sorry, I don't remember where I saw it described. I think I used it on my SM-T290, so start by checking the T290 and T295 threads.
Click to expand...
Click to collapse
HI, thanks for the reply, actually the tab has been added and recognized in odin, but while Odin will try to setup connection if always fail. and bootloader screen is not showing anymore only this new recovery screen which is totally different from the original and from those I have seen in the forum. attached image is the new recovery screen when I press Power + vol. up button.
JayR0503 said:
HI, thanks for the reply, actually the tab has been added and recognized in odin, but while Odin will try to setup connection if always fail. and bootloader screen is not showing anymore only this new recovery screen which is totally different from the original and from those I have seen in the forum. attached image is the new recovery screen when I press Power + vol. up button.
Click to expand...
Click to collapse
I don't know what the options on your new recovery screen are. (Do you know what "RDX" is?) I can't read the first stack of options.
The tricky procedure I am trying to remember had to do with triggering download mode, and getting Odin to connect. Try to find a more reliable description of the procedure, it will probably include an explanation of what problem it is trying to solve.
JayR0503 said:
HI, thanks for the reply, actually the tab has been added and recognized in odin, but while Odin will try to setup connection if always fail. and bootloader screen is not showing anymore only this new recovery screen which is totally different from the original and from those I have seen in the forum. attached image is the new recovery screen when I press Power + vol. up button.
Click to expand...
Click to collapse
Well not long before I saw someone enter this ss rdx mode. Maybe it is some sort of crashdump mode or something. Let the battery drain down and try to boot up again.
J.Michael said:
I don't know what the options on your new recovery screen are. (Do you know what "RDX" is?) I can't read the first stack of options.
The tricky procedure I am trying to remember had to do with triggering download mode, and getting Odin to connect. Try to find a more reliable description of the procedure, it will probably include an explanation of what problem it is trying to solve.
Click to expand...
Click to collapse
Hi i don't really have idea about RDX sorry but im searching about it also.. there are only 4 options for me to choice from the new menu, To PC connect or US, Connect to SD Card, RDX AGAIN and RDX Exit that's all.
LR7875 said:
Well not long before I saw someone enter this ss rdx mode. Maybe it is some sort of crashdump mode or something. Let the battery drain down and try to boot up again.
Click to expand...
Click to collapse
I'm trying to find some info on RDX also but I did tried to drain the battery but when it bootup same situation exit...
JayR0503 said:
Hi i don't really have idea about RDX sorry but im searching about it also.. there are only 4 options for me to choice from the new menu, To PC connect or US, Connect to SD Card, RDX AGAIN and RDX Exit that's all.
Click to expand...
Click to collapse
Have you tried:
tablet shut down, no cable
run Odin on PC
boot tablet
connect cable between tablet and PC
I'm hoping that option
Code:
[To PC] Connect a USB Cable
means "If you want to connect to a PC, now is the time to connect a USB cable."
Upload Mode means RDX Tool...
Upload Mode
There are several modes that Wave bootloader supports for certain purposes. The normal mode and low power mode just start the Nucleus kernel. I'm also pretty sure everybody knows what a DOWNLOAD MODE is (one with the red letters, but if initiated...
forum.xda-developers.com
Check this Thread...
Best Regards