Database Info

Unlocking bootloader lg g pro 2

unlocking a bootloader is not a piece of cake. You will need to go through some programming codes and you will need to be cautious. Before we proceed further you must remember that doing this will void the warranty of your LG G pro 2 and you yourself will be responsible for any damage.
1. Download Android SDK and install it. It is easily available on internet from any source, install all Google USB drivers.
2. Enable USB debugging as shown in the steps while rooting your device.
3. Plug in the USB cable into your Smartphone and connect it with your PC.
4. Type adb devices > adb reboot bootloader > fastboot devices > fastboot oem unlock.
You have to insert all the commands shown above in the same sequence. Let me make you understand the meaning of these commands.
adb devices: This command will check and navigate whether your device is plugged in and revealed in SDK.
adb reboot bootloader: This command reboots your Smartphone into bootloader.
fastboot devices: This command double checks that your LG G pro 2 is connected.
fastboot oem unlock: This is the final command which will make your device to unlock bootloader.
After typing this command, on you Smartphone a confirmation screen will be shown. You just have to press Volume Up button for yes and Power off button to confirm.
Now you have to just restart your device and your bootloader will be unlocked. Kindly use these tricks with extra care and don’t worry all these tricks are safe and already experimented
What is your opinion on this topic?

unlock already!?
meshk said:
unlocking a bootloader is not a piece of cake. You will need to go through some programming codes and you will need to be cautious. Before we proceed further you must remember that doing this will void the warranty of your LG G pro 2 and you yourself will be responsible for any damage.
1. Download Android SDK and install it. It is easily available on internet from any source, install all Google USB drivers.
2. Enable USB debugging as shown in the steps while rooting your device.
3. Plug in the USB cable into your Smartphone and connect it with your PC.
4. Type adb devices > adb reboot bootloader > fastboot devices > fastboot oem unlock.
You have to insert all the commands shown above in the same sequence. Let me make you understand the meaning of these commands.
adb devices: This command will check and navigate whether your device is plugged in and revealed in SDK.
adb reboot bootloader: This command reboots your Smartphone into bootloader.
fastboot devices: This command double checks that your LG G pro 2 is connected.
fastboot oem unlock: This is the final command which will make your device to unlock bootloader.
After typing this command, on you Smartphone a confirmation screen will be shown. You just have to press Volume Up button for yes and Power off button to confirm.
Now you have to just restart your device and your bootloader will be unlocked. Kindly use these tricks with extra care and don’t worry all these tricks are safe and already experimented
What is your opinion on this topic?
Click to expand...
Click to collapse
if our phone's bootloader can be unlock, we can have twrp now??

false information.
meshk said:
unlocking a bootloader is not a piece of cake. You will need to go through some programming codes and you will need to be cautious. Before we proceed further you must remember that doing this will void the warranty of your LG G pro 2 and you yourself will be responsible for any damage.
1. Download Android SDK and install it. It is easily available on internet from any source, install all Google USB drivers.
2. Enable USB debugging as shown in the steps while rooting your device.
3. Plug in the USB cable into your Smartphone and connect it with your PC.
4. Type adb devices > adb reboot bootloader > fastboot devices > fastboot oem unlock.
You have to insert all the commands shown above in the same sequence. Let me make you understand the meaning of these commands.
adb devices: This command will check and navigate whether your device is plugged in and revealed in SDK.
adb reboot bootloader: This command reboots your Smartphone into bootloader.
fastboot devices: This command double checks that your LG G pro 2 is connected.
fastboot oem unlock: This is the final command which will make your device to unlock bootloader.
After typing this command, on you Smartphone a confirmation screen will be shown. You just have to press Volume Up button for yes and Power off button to confirm.
Now you have to just restart your device and your bootloader will be unlocked. Kindly use these tricks with extra care and don’t worry all these tricks are safe and already experimented
What is your opinion on this topic?
Click to expand...
Click to collapse
Yes this is true for older phones but will NOT work for any variant of the l g pro 2 don't get excited guys....

So I'm wondering how come we can install and use PhilZ Touch recovery if the bootloader is locked. Or has PhilZ recovery image been signed or bumped or what?

[Completed] Unlock boootloader for ZTE blade q maxi

I need help.I try to unlock the bootloader on zte blade maxi but I always fail.Who know how i can unlock it, I already root him.Pls help me.Tnx...

XDA Visitor said:
I need help.I try to unlock the bootloader on zte blade maxi but I always fail.Who know how i can unlock it, I already root him.Pls help me.Tnx...
Click to expand...
Click to collapse
Hi,
This is what i could find for you.... hope it helps.
ZTE Blade Q Maxi Unlock Bootloader Tutorial
ZTE Blade Q Maxi Unlock Bootloader Tutorial
I rewrite this tutorial from forum.xda-developers.com :
To unlock the boot loader on your ZTE Blade Q Maxi you need to have the ADT with all the packages installed and configured. Download ADT with all the packages from this link : http://developer.android.com/sdk/index.html
Later once the configuration is done properly then you can connect your device and enable USB Debugging under the options.
1. Download Modaco Superboot file for ZTE Blade Q Maxi from this link : http://downloadsafe.org/file/0YgX7 , and save them to your computer.
Tutorial Video : Easy Way To Download file = http://how-to-root.com/10
2. Once downloaded, extract it by right clicking and extract all.
3. On your device, click on Settings > Developer Options > Turn USB Debugging On.
4. Plug the device in to your computer via USB cable.
5. Open the superboot folder that we just extracted (until you see the folder with fastboot-windows inside it), then hold the shift key down on your computer and right click any blank area.
6. Now, select open command window here.
7. In the command prompt, type the following with hitting enter at the end of each line.
adb-windows reboot bootloader (and wait for the device to reboot) fastboot-windows oem unlock *If it gets stuck at waiting for device here, download and install PDANet on your computer, once installed, unplug then plug the device back in and see if that fixes it.
Once it runs the device should display a screen asking you if you are sure. Click yes using the volume buttons. The device will go back to the bootloader screen but say unlocked at the bottom.

Cant Root To Doogee X9

Good day magicians of the android and xda users, followed a tutorial where to root this you have to flash the TWRP, to be able to then install SUPERSU. (A normal root as far as I understand).
What happened is that I saw that to be able to entral to the recovery it was necessary to unblock the bootloader but doing it by means of ADB / fastboot
I follow the basic command list and when I put "fastboot oem unlock" it stays frozen and does not work on the cell phone says yes / no; volume up / down I press up / if on the cell phone while the console stays in ellipsis ... I do not know how to unblock that I can not. Any suggestions, thank you.:crying:

sony ultra 3223 root?

Hi
Is their a root solution for Sony 3223

Hi, through the official Sony Xperia website, follow their instructions and get an unlock code to unlock your bootloader. Then follow instructions at twrp.me on how to boot TWRP in order to flash stuff. Magisk works.

I will make a comprehensive root guide.
Basically you need to check your device eligibility, and get the code when it's eligible.
Backup your data
Enable USB debugging and allow your host computer.
Make sure OEM Unlocking enabled
Install Sony Companion for drivers.
Download TWRP in development section
Turn the phone off.
Take memory card out and copy the latest Magisk
Press volume up when connecting to host computer, and the phone should show blue light
Check Device Manager. If you see unknown device, pick the driver and user Sony soXXXX (XXXX is the number)
Open command prompt and go to where ADB is.
Enter fastboot devices
If the model showed up, enter the command shown on Sony developer site along with code given
Let the phone boots like new and finish the initial setup.
Turn the phone off
Press volume up when connecting to host computer
Enter fastboot boot and press space once, and drag-and-drop the TWRP into the command prompt and press enter.
Install TWRP and reboot

Thanks for reply I through H3223 was not root able in Oreo?

mchlbenner said:
Thanks for reply I through H3223 was not root able in Oreo?
Click to expand...
Click to collapse
I just bought a new H3223 XA2 Ultra, and it updated all the way to the December 2018 security update. I just enabled developer options, enabled OEM unlock, and got an unlock code from Sony.
I then ran the service menu check on the phone, and it stated that the phone CAN be unlocked.
I haven't done it yet, but yes, you can unlock and root this phone.

Is there a way as of 2020 to unlock the bootloader?

Yes, I have searched the whole forum and after finding mixed answers I decided to post a question myself. I have used the Huawei Bootloader Unlock app from the Play Store in a P10 Lite and it worked fine but it says P20 is not supported. I have read on methods like disassembling the device but that's out of my range. So the question here is: Is there ANY way (apart from the disassembling one) to unlock the bootloader?
Thanks.

TotallyNotInUse said:
Yes, I have searched the whole forum and after finding mixed answers I decided to post a question myself. I have used the Huawei Bootloader Unlock app from the Play Store in a P10 Lite and it worked fine but it says P20 is not supported. I have read on methods like disassembling the device but that's out of my range. So the question here is: Is there ANY way (apart from the disassembling one) to unlock the bootloader?
Thanks.
Click to expand...
Click to collapse
I asked DC_Unlocker Support if they could Unlock my Bootloader on my P10Lite with android 8 ! And they told me after Android 8, and Emui 5+ the P10Lite Devices aren't Supported now.
If their would be a Way or if anyone has an other Idea... DLoad, Flashing Roms Rollback didn't worked for me.
But i would really like to try other Ways if their would be a Chance for a Working Way to Rollback on Android 7. Couse than DC-Unlocker would Work and could Unlock the Bootloader and Root the Phone, Flash TWRP and Doing much other things.
Sent from my [device_name] using XDA-Developers Legacy app

I'd love to know... I have my unlock code, but I have no idea how to use it. I got my code from Huawei before they stopped providing them.

ElChe said:
I'd love to know... I have my unlock code, but I have no idea how to use it. I got my code from Huawei before they stopped providing them.
Click to expand...
Click to collapse
First of all, enable the Developer Option
1. To Enable the Developer Option, Go to your Settings –> System -> About Phone -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled“
2. Now go to Developer optiosn in the settings and Enable OEM unlock
3. Download Minimal ADB and Fastboot
4. Turn off your phone and Press Volume Up and Power button simultaneously to open Fastboot mode or enter the command [to enter command, you need to connect your phone to PC using USB Cable]
Code:
adb reboot bootloader
5. now unlock your device’s bootloader with this command line.
Code:
fastboot oem unlock *****************
You need to replace the ****** with the unique unlock code.
Once it is done, you can reboot your phone. Now you can install TWRP Recovery, Custom Kernel, Root or even install Custom ROM. Enjoy!

TotallyNotInUse said:
First of all, enable the Developer Option
1. To Enable the Developer Option, Go to your Settings –> System -> About Phone -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled“
2. Now go to Developer optiosn in the settings and Enable OEM unlock
3. Download Minimal ADB and Fastboot
4. Turn off your phone and Press Volume Up and Power button simultaneously to open Fastboot mode or enter the command [to enter command, you need to connect your phone to PC using USB Cable]
Code:
adb reboot bootloader
5. now unlock your device’s bootloader with this command line.
Code:
fastboot oem unlock *****************
You need to replace the ****** with the unique unlock code.
Once it is done, you can reboot your phone. Now you can install TWRP Recovery, Custom Kernel, Root or even install Custom ROM. Enjoy!
Click to expand...
Click to collapse
Wow thanks! I'll get on that this weekend!