G flex 2 korean version updated to 6.0.1 - LG G Flex 2

Follow the link :
http://m.ppomppu.co.kr/new/bbs_view.php?id=phone&no=3201270&page=1
Update te korean device via lg pc suite , it will take 30-40 minutes to get updated !!

http://forum.xda-developers.com/showthread.php?p=67257040
Tapnięte.

Is there any way we can update the AT&T H950 variant to this Korean update?

According to a Chinese forum, http://bbs.angeeks.com/thread-3956441-1-11.html
H959(32G) is the same as F510k, they can cross flash the kdz.
But there is no kdz for F510 on the internet.

none from korea here to share experience ?

Well, at least it's happening. Just be patient, we waited for so long and I don't think a few more days will be a problem.

Ahmedt7866 said:
Is there any way we can update the AT&T H950 variant to this Korean update?
Click to expand...
Click to collapse
Do not try it even if tot or kdz is available for that..
H950 has qfuse set and anything that is qfuse<1 ie 0 will hard brick the device..
I just hope that there will be some exploit that can give us custom recovery and kernel someday..
However kernel hijacking is a possibility but devs with enough knowledge arent interested in this device ...
Also MM may not have root simply also due to dm_verity in kernel..
For us h950 users outside USA there may never be a MM either...
I was wondering if we all take it to twitter to demand a solution for custom kernel bombing their twitter we may get a good response
We can even say our devices heat up so much that it reaches temp of 60-70+ so we need to modify vdd freely for all g flex 2...
They may acknowledge the sd810 problem and send a method to unlock all variants..
What do u say guys?
Sent from my LG-H950 using XDA-Developers mobile app

adds08 said:
Do not try it even if tot or kdz is available for that..
H950 has qfuse set and anything that is qfuse<1 ie 0 will hard brick the device..
I just hope that there will be some exploit that can give us custom recovery and kernel someday..
However kernel hijacking is a possibility but devs with enough knowledge arent interested in this device ...
Also MM may not have root simply also due to dm_verity in kernel..
For us h950 users outside USA there may never be a MM either...
I was wondering if we all take it to twitter to demand a solution for custom kernel bombing their twitter we may get a good response
We can even say our devices heat up so much that it reaches temp of 60-70+ so we need to modify vdd freely for all g flex 2...
They may acknowledge the sd810 problem and send a method to unlock all variants..
What do u say guys?
Sent from my LG-H950 using XDA-Developers mobile app
Click to expand...
Click to collapse
you have my support by twittering them all day long if it will help

What about PR Versions, can't we get H950PR Marshmallow after being released and flash it over the existing 5.1.1 ???

https://drive.google.com/file/d/0B0UblGbOPFYBTWJ4OFgzN29Wemc/view?usp=drivesdk
System dump of F510l v20b

kjub said:
you have my support by twittering them all day long if it will help
Click to expand...
Click to collapse
Thanks man bt if 100 ppl do it for atleast 4hr itd be great.. A smartphone world twitter revolution.. XD
mkhman said:
What about PR Versions, can't we get H950PR Marshmallow after being released and flash it over the existing 5.1.1 ???
Click to expand...
Click to collapse
No even ATT PR has no qfuse set.. ATT 5.1.1 has qfuse so not possible..
Will result in infamous q9008 brick..
kevin3688 said:
https://drive.google.com/file/d/0B0UblGbOPFYBTWJ4OFgzN29Wemc/view?usp=drivesdk
System dump of F510l v20b
Click to expand...
Click to collapse
Wow ..someone already dumped the system..
Bt no use right now for other variants..
Maybe like v10 lg will include oem unlock for h955 euro but what of us
Sent from my LG-H950 using XDA-Developers mobile app

kevin3688 said:
https://drive.google.com/file/d/0B0UblGbOPFYBTWJ4OFgzN29Wemc/view?usp=drivesdk
System dump of F510l v20b
Click to expand...
Click to collapse
2.84GB unpacked, is it just me or its much smaller than 5.1.1?

adds08 said:
Thanks man bt if 100 ppl do it for atleast 4hr itd be great.. A smartphone world twitter revolution.. XD
No even ATT PR has no qfuse set.. ATT 5.1.1 has qfuse so not possible..
Will result in infamous q9008 brick..
Wow ..someone already dumped the system..
Bt no use right now for other variants..
Maybe like v10 lg will include oem unlock for h955 euro but what of us
Sent from my LG-H950 using XDA-Developers mobile app
Click to expand...
Click to collapse
What about flashing H950PR Marshmallow over H950 V. 5.0.1 ????? is it applicable ???

F510L20b_00_0519.kdz
http://pkg02.xcdn.gdms.lge.com/dn/downloader.dev?fileKey=FW4DNGN5523KA7U784EFRMQ/F510L20b_00_0519.kdz
For LG F510L Only.

mkhman said:
What about flashing H950PR Marshmallow over H950 V. 5.0.1 ????? is it applicable ???
Click to expand...
Click to collapse
i dont know if it works, i see in another thread someone asking for flash h955 over f510l and the only thing they say is the modem driver maybe dont work, you will dont have network connection...but maybe the rom works.

Now we only need a rooted image.

baggerbodo said:
Now we only need a rooted image.
Click to expand...
Click to collapse
U wont root Marshmallow on Flex 2.

baggerbodo said:
Now we only need a rooted image.
Click to expand...
Click to collapse
Flash only the system.img, the phone won't boot.
Unless you know how?

mkhman said:
What about flashing H950PR Marshmallow over H950 V. 5.0.1 ????? is it applicable ???
Click to expand...
Click to collapse
Yes that is applicable.. But don't downgrade att 5.1.1 to 5.0.1
Downgrade for att 5.1.1 is not possible whatsoever
Sent from my LG-H950 using XDA-Developers mobile app

I saw a few disappointments ahead when it's fully realised that without a unlocked boot loader we can't root marshmallow.

Related

I have a LG G Stylo (Canadain) modle number LG-H636

I have a LG G Stylo (Canadain) modle number LG-H636
i rooted mt phone and after a day i unrooted it . Now when i try to update my phone it wont update cz it say its suspected of rooting.
How can i flash the stock rom for this phone ? and where can i download the stock rom for this model ?like how can i get it back to normal and then update ? plz help
What provider are you with?
If it's a Fido phone, there is a KDZ available
Do you have 5.1 or 5.0 on fido ? With videotron, we're stuck a 5.0 and it's full of bug and very laggy.
mana4.com said:
Do you have 5.1 or 5.0 on fido ? With videotron, we're stuck a 5.0 and it's full of bug and very laggy.
Click to expand...
Click to collapse
5.1.1 is available, but I haven't updated. I am not able to attain root and don't wish to make it harder with an update. Otherwise, the system runs stable at 5.0.2
I have 5.0.2 and don't notice many bugs if any. Battery life is excellent l, 2-3 days if not used much.
I have a fido lg Stylo h636 and want to update too but I've rooted with king root. What a mistake because now I can't update. Any fix for this?
wind
fearhq said:
If it's a Fido phone, there is a KDZ available
Click to expand...
Click to collapse
im with but this phone is unlocked is there any way i can get it to work ?
with wind
asidorowicz said:
What provider are you with?
Click to expand...
Click to collapse
im with wind bu my phone is unlocked
unknownshake said:
im with wind bu my phone is unlocked
Click to expand...
Click to collapse
Use this link, but replace "IMEI" with your imei. You can get it by dialing *#06#. This should give you a link to a kdz file
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=IMEI
unknownshake said:
im with but this phone is unlocked is there any way i can get it to work ?
Click to expand...
Click to collapse
fearhq said:
If it's a Fido phone, there is a KDZ available
Click to expand...
Click to collapse
asidorowicz said:
Use this link, but replace "IMEI" with your imei. You can get it by dialing *#06#. This should give you a link to a kdz file
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=IMEI
Click to expand...
Click to collapse
there is a H636 KDZ files , so i believe i do will be safe if you give it a shot about trying either of the Root Methods and if you manage to get Root access someone from the Stylo scene can help and port TWRP for you guys.
KDZ can be found in my thread (Thanks @asidorowicz for the KDZ download link)
http://forum.xda-developers.com/android/development/read-trying-to-root-kdz-files-kdz-tmo-t3152531/
help
DrakenFX said:
there is a H636 KDZ files , so i believe i do will be safe if you give it a shot about trying either of the Root Methods and if you manage to get Root access someone from the Stylo scene can help and port TWRP for you guys.
KDZ can be found in my thread (Thanks @asidorowicz for the KDZ download link)
http://forum.xda-developers.com/android/development/read-trying-to-root-kdz-files-kdz-tmo-t3152531/
Click to expand...
Click to collapse
So if i use the fido KDZ will it work on my phone ? is it safe ?
unknownshake said:
So if i use the fido KDZ will it work on my phone ? is it safe ?
Click to expand...
Click to collapse
KDZ are like Factory Device Restore File, having the KDZ is like a having a Doctor next to you when come to Un-brick/Full Restore/Unroot you device , I don't know which LP version this KDZ is but if this v10i is 5.1.1. and you are on 5.0.2 you'll be like Updating your device to the Latest android/software available on your carrier.
Use @GameTheory. Unbrick Guide can be found here http://androidcreations.weebly.com/lg-g-stylo.html
10k
DrakenFX said:
KDZ are like Factory Device Restore File, having the KDZ is like a having a Doctor next to you when come to Un-brick/Full Restore/Unroot you device , I don't know which LP version this KDZ is but if this v10i is 5.1.1. and you are on 5.0.2 you'll be like Updating your device to the Latest android/software available on your carrier.
Use @GameTheory. Unbrick Guide can be found here http://androidcreations.weebly.com/lg-g-stylo.html
Click to expand...
Click to collapse
My version is not 10i mine is 10K. will ur method still work ?
unknownshake said:
My version is not 10i mine is 10K. will ur method still work ?
Click to expand...
Click to collapse
doesn't matter which version you have the KDZ method (which is not mine btw ) will still work but in this case i don't know if v10K is actually a better update than v10i.
Edit: @unknownshake
The v10k KDZ is been release check my KDZ link from preview post if you need to download
there is no update
DrakenFX said:
doesn't matter which version you have the KDZ method (which is not mine btw ) will still work but in this case i don't know if v10K is actually a better update than v10i.
Edit: @unknownshake
The v10k KDZ is been release check my KDZ link from preview post if you need to download
Click to expand...
Click to collapse
i reostred my phone using the method u tolled me before , and i restored it to the version 10i. But the andriod version is still on 5.0.2 everytime i check for update it say there is no update. isnt there 5.1.1 update for this ?
if i want to restore my phone again can i install the 10j version on it ? mine is the Canadian version phone.
unknownshake said:
i reostred my phone using the method u tolled me before , and i restored it to the version 10i. But the andriod version is still on 5.0.2 everytime i check for update it say there is no update. isnt there 5.1.1 update for this ?
if i want to restore my phone again can i install the 10j version on it ? mine is the Canadian version phone.
Click to expand...
Click to collapse
try using the v10k KDZ that's the latest software firmware for you device,
P.S. i don't know which LP version is v10k but i know is the latest release.
cant downlaod it
DrakenFX said:
try using the v10k KDZ that's the latest software firmware for you device,
P.S. i don't know which LP version is v10k but i know is the latest release.
Click to expand...
Click to collapse
its not downloading , when i click on v10k it jus opens a blank page.
unknownshake said:
its not downloading , when i click on v10k it jus opens a blank page.
Click to expand...
Click to collapse
give it a try now is working for both H636 (Canadian Stylo) KDZ's
its downloading now
DrakenFX said:
give it a try now is working for both H636 (Canadian Stylo) KDZ's
Click to expand...
Click to collapse
Thank You , its downloading now. one more question , will i b able to update my phone by OTA after i i restore my phone using this ?
unknownshake said:
Thank You , its downloading now. one more question , will i b able to update my phone by OTA after i i restore my phone using this ?
Click to expand...
Click to collapse
YES, using KDZ method will erase all/every trace of root/custom recovery and all that so you'll be able to get OTA's

How to Update my Lg g3 D850 to official lollipop

I need to update my g3 d850 to official lollipop and unable to find .kdz anywhere. Can anyone help me how to update the g3 to official lollipop with detail steps and links? Even lg support tool is showing that it is up to date. I am currently running on 4.4.2.
krishna13 said:
I need to update my g3 d850 to official lollipop and unable to find .kdz anywhere. Can anyone help me how to update the g3 to official lollipop with detail steps and links? Even lg support tool is showing that it is up to date. I am currently running on 4.4.2.
Click to expand...
Click to collapse
The AT&T D850 is TOT method only that's why there's no kdz at all. Only official lollipop you can get is to insert an AT&T sim.
Sent from my iPhone using Tapatalk
hyelton said:
The AT&T D850 is TOT method only that's why there's no kdz at all. Only official lollipop you can get is to insert an AT&T sim.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
no i cant. I stay in india. Its an unlocked phone. Can you please help me to update it manually through TOT...
krishna13 said:
no i cant. I stay in india. Its an unlocked phone. Can you please help me to update it manually through TOT...
Click to expand...
Click to collapse
You cannot update it with a tot file. As there's only KitKat. Your only way is to have an AT&T sim or root / custom rom. Or it might be possible to root and load the update file. Never done the img update file before but if it can be done it would be in the general section.
Sent from my iPhone using Tapatalk
hyelton said:
You cannot update it with a tot file. As there's only KitKat. Your only way is to have an AT&T sim or root / custom rom. Or it might be possible to root and load the update file. Never done the img update file before but if it can be done it would be in the general section.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
So is it possible to flash/ install a stock rom after rooting my device?
If yes, can you provide me with the link and some steps to follow.
I will be very thankful to you.
krishna13 said:
So is it possible to flash/ install a stock rom after rooting my device?
If yes, can you provide me with the link and some steps to follow.
I will be very thankful to you.
Click to expand...
Click to collapse
Search is very helpful
But here you go: http://forum.xda-developers.com/att-lg-g3/development/rom-lg-d850-20f-lollipop-5-0-1-extras-t3052041
hyelton said:
Search is very helpful
But here you go: http://forum.xda-developers.com/att-lg-g3/development/rom-lg-d850-20f-lollipop-5-0-1-extras-t3052041
Click to expand...
Click to collapse
Thanku.
But is this a custom rom or stock rom?
How to install twrp recovery?
Even in future if any updates were released then i need to install either with sim card or flashing custom roms for my at&t model?
if you're going to go through the effort of rooting your phone you might as well install twrp which instructions you can find on these forums or even on twrp website I believe. the link clearly states that it is a stock rom. furthermore the guy was even nice enough to include his own instructions! what more could you ask for.
a little reading goes a long way. personally, I would vote to stick with a stock rom like the one linked above as it will be most stable and support all the features of the phone out of the box.
once a 6.0 rom is released for the d850 it will be real easy for you to wipe and flash that to upgrade again.

Android 5.1.1 Update for AT&T G Flex 2 Unlocked in India.

Alright So I just got the G Flex 2 here in India, it's a AT&T device which is unlocked to work on all networks. the phone is currently running 5.0.1 which is Slow and laggy and heats up bad and I desperately need to update it to 5.1.1 even if it's not the latest one. I'm not too technical and can't flash anything so maybe a simple install package or something is available which would be helpful.
also, since I tried to check the update after manually taking the date forward and took it like 2-3 months ahead I can't check for updates till 2351 hours so maybe a work around with that too, please. I have a stable WIFI connection at my disposal.:good:
you can upgrade with H950PR A 5.1.1 , HAS A POST OF HOW TO MAKE THE PROCESS , I FEEL MY BAD ENGLISH
yash.khatri3297 said:
Alright So I just got the G Flex 2 here in India, it's a AT&T device which is unlocked to work on all networks. the phone is currently running 5.0.1 which is Slow and laggy and heats up bad and I desperately need to update it to 5.1.1 even if it's not the latest one. I'm not too technical and can't flash anything so maybe a simple install package or something is available which would be helpful.
also, since I tried to check the update after manually taking the date forward and took it like 2-3 months ahead I can't check for updates till 2351 hours so maybe a work around with that too, please. I have a stable WIFI connection at my disposal.:good:
Click to expand...
Click to collapse
Use TOT method to upgrade firmware.
VeTaLkhv said:
Use TOT method to upgrade firmware.
Click to expand...
Click to collapse
Any links or tutorials?
yash.khatri3297 said:
Any links or tutorials?
Click to expand...
Click to collapse
http://forum.xda-developers.com/g-flex2/general/guide-lg-g-flex-2-stock-firmware-to-t3037593
Flash directly to 11z, .tot presented in that topic is also some debloated and rooted, so near to zero other manipulations.
Btw, search for another Mega Lock dll file, the one mentioned in that topic didnt worked for me.
no no no. dont do TOT
I am in India and am happily running 5.1.1. Claro. I have done this and have a youtube video as well. check it out
abhishek.banerjee said:
no no no. dont do TOT
I am in India and am happily running 5.1.1. Claro. I have done this and have a youtube video as well. check it out
Click to expand...
Click to collapse
Do you have a link for that video?

g5 rom

i am making a new rom from 6.0.1 i am trying with g5 modded apps
XDA:DevDB Information
g5 rom for lg gflex 2, ROM for the LG G Flex 2
Contributors
nikolas60, Nikolas60
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Testing
Created 2016-07-25
Last Updated 2016-07-25
i need help can i make it on kdz file so anyone can flash it i found a way to recompile it to kdz and evrything but will it break my bootloader it will be base on mm
nikolas60 said:
ROM OS Version: 2.3.x Gingerbread
Click to expand...
Click to collapse
WTF?!
KoumiCZ said:
WTF?!
Click to expand...
Click to collapse
sorry fixed
I am not addict to custom roms but if you need anything from an owner of a rooted H955 v15c just mention it.
By the way, are you planning custom rom for all models?
yea good luck with locked bootloader.
If you need anything with a rooted 15e (latest lollipop version) image, I can help. Also, how are you going to flash a ROM with the bootloader locked in marshmallow, since bootloader locked in mm = no root and no flashing ROMs? But still very good initiative, I'll look forward to see your progress on the ROM. Nice idea C:
We will give you all our support~
i will try to root mm first
Do it, do it now
i bricked send it to lg and i hope it will get fixed by warranty as far of lock boot loader the phone failed while flashing rom and the partitions where changed so when i was flashing stock Rom was stuck at 9 percent on lg up and i read on forums a lot have the same problem maybe i will not root again lg g flex 2 stock marshmallow to be safe in my other phones the rooting process was easy now i dot want to brick it again sorry guys il try to make mods from v10 for 5.1.1 nothing more for you guys me i will not use it im guess root break this phone partitions so sorry
nikolas60 said:
i bricked send it to lg and i hope it will get fixed by warranty as far of lock boot loader the phone failed while flashing rom and the partitions where changed so when i was flashing stock Rom was stuck at 9 percent on lg up and i read on forums a lot have the same problem maybe i will not root again lg g flex 2 stock marshmallow to be safe in my other phones the rooting process was easy now i dot want to brick it again sorry guys il try to make mods from v10 for 5.1.1 nothing more for you guys me i will not use it im guess root break this phone partitions so sorry
Click to expand...
Click to collapse
Well, at least you tried. Thanks for that. If you ever decide to look into unlocking the G Flex2's bootloader, make sure to update us
lets just hope for 7.0. I know LG firmware can get up to v30. so far we have v20 mallows
Iron_Overheat said:
If you need anything with a rooted 15e (latest lollipop version) image, I can help. Also, how are you going to flash a ROM with the bootloader locked in marshmallow, since bootloader locked in mm = no root and no flashing ROMs? But still very good initiative, I'll look forward to see your progress on the ROM. Nice idea C:
Click to expand...
Click to collapse
Please notice that actually we can unlock it very easy as we have have root and flashfire!
raftomas88 said:
Please notice that actually we can unlock it very easy as we have have root and flashfire!
Click to expand...
Click to collapse
... oh really ? and how exactly can we do that? It would be great if you could explain it, because everyone here is actually waiting for that to happen !
Flashfire may work at least backing up all partitions.
I believe it still needs a custom recovery to flash but I haven't gotten my device yet. Will be here in a few days.
Sent from my 0PJA2 using Tapatalk
rootlinux said:
Flashfire may work at least backing up all partitions.
I believe it still needs a custom recovery to flash but I haven't gotten my device yet. Will be here in a few days.
Sent from my 0PJA2 using Tapatalk
Click to expand...
Click to collapse
any progress?
LG FLEX 2
When it will be realise 4 donwload? and twrp too.. thank uu.
dragantnt said:
When it will be realise 4 donwload? and twrp too.. thank uu.
Click to expand...
Click to collapse
Today

LG V10 (F600L,F600K and F600S) Android N 7.0 kdz firmware

Here you are the Android N 7.0 firmware for LG V10.
G V10 F600S
V30d:
F600K30d_00_0510.kdz
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW3E5QZB72KWAOTD0283M9M/F600K30d_00_0510.kdz
LG V10 F600L
v30e:
F600L30e_00_0517.kdz
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW5BEN6B72G7AALC76A34BI/F600L30e_00_0517.kdz
LG V10 F600L
V30d
F600K30d_00_0510.kdz
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW3E5QZB72KWAOTD0283M9M/F600K30d_00_0510.kdz
PHP:
wget --user-agent="LGE-ActiveDP/0.9" http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW4E54ZB72FZALGFEC83DCX/F600S30d_00_0510.kdz -O F600S30d_00_0510.kdz
Learn how to download kdz firmware from LG server
Source: https://www.mylgphones.com/lg-v10-f600l-f600k-f600s-android-7-0-stock-kdz-firmware-how-to-upgrade-lg-v10-to-android-7-0-with-lg-up.html
Can i install it in international model (H960a) manually?
omar2005 said:
Can i install it in international model (H960a) manually?
Click to expand...
Click to collapse
NO! This is for Korean models only, if you install this you will lose network conectivity and other features...so, is better to wait a week to have the right one to your model...in my case is the H960A too.
Thank you
Someone knows the changelog?
KhainoZeitgeist said:
Someone knows the changelog?
Click to expand...
Click to collapse
WAT!?
Half of these feat. already are on V10.
No changes/improvement to the Second Screen?
Disappointing
KhainoZeitgeist said:
WAT!?
Half of these feat. already are on V10.
No changes/improvement to the Second Screen?
Disappointing
Click to expand...
Click to collapse
LOL! you are gettin' the same reaction as me, no big deal update, some "little" changes but nothing really new...
The better thing we get is the UX and fresh design apps.
But maybe better performance and better battery management.
Second screen should see some improvements but again nothing new, maybe we get the same treatment as V20 have in this aspect. DPI change in the second screen to put more words are welcome...
Lets wait and see if some of our Korean friends (or the people who have the Korean bariants over here) say anything in the next days about pros and cons of this update.
Waiting for my h961n
Sent from my LG-H961N using Tapatalk
Waiting for h901
Waiting for my h961n too
ruk_design said:
Waiting for my h961n too
Click to expand...
Click to collapse
+1
asialove2013 said:
Here you are the Android N 7.0 firmware for LG V10.
G V10 F600S
V30d:
F600K30d_00_0510.kdz
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW3E5QZB72KWAOTD0283M9M/F600K30d_00_0510.kdz
LG V10 F600L
v30e:
F600L30e_00_0517.kdz
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW5BEN6B72G7AALC76A34BI/F600L30e_00_0517.kdz
LG V10 F600L
V30d
F600K30d_00_0510.kdz
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW3E5QZB72KWAOTD0283M9M/F600K30d_00_0510.kdz
PHP:
wget --user-agent="LGE-ActiveDP/0.9" http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW4E54ZB72FZALGFEC83DCX/F600S30d_00_0510.kdz -O F600S30d_00_0510.kdz
Learn how to download kdz firmware from LG server
Source: https://www.mylgphones.com/lg-v10-f600l-f600k-f600s-android-7-0-stock-kdz-firmware-how-to-upgrade-lg-v10-to-android-7-0-with-lg-up.html
Click to expand...
Click to collapse
use below link to find all kdz files in a place if you face any link issue in post above.
https://lg-firmwares.com/category/lg-series/lg-v10/
Waiting for lg H960A xD
I have a LG V10 F600L running on Android 5.1.1.
I bought this phone used and when I bought it, it was already rooted. I don't have any experience with this sort of thing and I don't really want my finances to be burdened with replacing a phone if I accidentally brick it.
I know its a lot to request but can anyone take the time tell me how exactly I should proceed? What steps should I take? what guides I should follow? etc.
I have literally never touched the technical aspects of a phone's OS and firmware, etc. in my life before. But I really do want to update and will follow all instructions and precautions.
Thank you in advance
Sovereign31 said:
I have a LG V10 F600L running on Android 5.1.1.
I bought this phone used and when I bought it, it was already rooted. I don't have any experience with this sort of thing and I don't really want my finances to be burdened with replacing a phone if I accidentally brick it.
I know its a lot to request but can anyone take the time tell me how exactly I should proceed? What steps should I take? what guides I should follow? etc.
I have literally never touched the technical aspects of a phone's OS and firmware, etc. in my life before. But I really do want to update and will follow all instructions and precautions.
Thank you in advance
Click to expand...
Click to collapse
Guys..
Lg h961n nougat has been launched seems. Please have a look on the website below.
https://lg-firmwares.com/lg-h961n-firmwares/
H961N30a file. I am downloading now and will confirm after flashing in my lg h961n#dual sim hongkong version.
sunny68097 said:
Guys..
Lg h961n nougat has been launched seems. Please have a look on the website below.
https://lg-firmwares.com/lg-h961n-firmwares/
H961N30a file. I am downloading now and will confirm after flashing in my lg h961n#dual sim hongkong version.
Click to expand...
Click to collapse
Omg....i got nougat for my phone..:angel::angel:
:laugh: Lg v10 ho61n dual SIM updated to Nougat.
Kdz file downloaded from the link mentioned above. I have flashed using uppercut.
You can see the screenshots attached taken from capture plus tool in our phone.
sunny68097 said:
Omg....i got nougat for my phone..:angel::angel:
:laugh: Lg v10 ho61n dual SIM updated to Nougat.
Kdz file downloaded from the link mentioned above. I have flashed using uppercut.
You can see the screenshots attached taken from capture plus tool in our phone.
Click to expand...
Click to collapse
your H961N is the Hong Kong version?? i see in the screenshot your software version GLOBAL so im cunfused.
I downloaded the kdz file ,now backuping up my data then will flash and see ?
Sent from my LG-H961N using Tapatalk
sun_is_shinning said:
your H961N is the Hong Kong version?? i see in the screenshot your software version GLOBAL so im cunfused.
Click to expand...
Click to collapse
I thought it's hongkong but i think it's international version. My apologies

Categories

Resources