[Completed] Huawei G610 U20 Hard reset loop, problem - XDA Assist

Hi everyone,
I´m stuck on rebooting/hard reset my device. Desperately. I´d like to start and saying that I´m not a IT person at all, and maybe my question can sound basic for you. I just need a little bit more clear advices and patience from you. Let´s start:
1) I did a buckup with the app. in the phone, another app start to work bad and I restarted the device normally with the power button and here we go the loop: vibration, logo Huawei, switch off.
2) Vol+ and POWER and I entered in Reboot system-> wipe data-> reboot now-> "[do_cust] do_cust enter" on screen -> reboot now (twice)------> loop
3) download firmware from Huawei Support (http://consumer.huawei.com/pk/mobile-phones/support/downloads/detail/ascend-g610-pk.htm?id=27463) --> format SD with FAT32 --> create the new "dload" folder --> extract the file UPDATE.APP into it --> VOL+ VOL- POWER to go in the download mode (it doesn´t work) --> Reboot mode --> wipe data --> Update from SD (empty, no file UPDATE.APP there) --> trying "reboot now" --> "[do_cust] do_cust enter" on screen --> reboot now (twice)------> loop
I search here and other forums a solution for my problem (like here http://forum.xda-developers.com/general/help/huawei-g610-u20-restart-wont-respond-to-t3375434 or here http://forum.xda-developers.com/chef-central/android/fix-boot-loop-huawei-g610-t2872171 ) but I guess they don´t match with my problem
Thank you a lot for your time!

Hi massino82
Thank you for using XDA Assist
As we do not have an specific forum dedicated for your device yet, our experts at the below forum should be able to help you. Please be welcome to ask in there.
Android Q&A, Help & Troubleshooting
Nice regards and good luck.
.
massino82 said:
Hi everyone,
I´m stuck on rebooting/hard reset my device. Desperately. I´d like to start and saying that I´m not a IT person at all, and maybe my question can sound basic for you. I just need a little bit more clear advices and patience from you. Let´s start:
1) I did a buckup with the app. in the phone, another app start to work bad and I restarted the device normally with the power button and here we go the loop: vibration, logo Huawei, switch off.
2) Vol+ and POWER and I entered in Reboot system-> wipe data-> reboot now-> "[do_cust] do_cust enter" on screen -> reboot now (twice)------> loop
3) download firmware from Huawei Support (http://consumer.huawei.com/pk/mobile-phones/support/downloads/detail/ascend-g610-pk.htm?id=27463) --> format SD with FAT32 --> create the new "dload" folder --> extract the file UPDATE.APP into it --> VOL+ VOL- POWER to go in the download mode (it doesn´t work) --> Reboot mode --> wipe data --> Update from SD (empty, no file UPDATE.APP there) --> trying "reboot now" --> "[do_cust] do_cust enter" on screen --> reboot now (twice)------> loop
I search here and other forums a solution for my problem (like here http://forum.xda-developers.com/general/help/huawei-g610-u20-restart-wont-respond-to-t3375434 or here http://forum.xda-developers.com/chef-central/android/fix-boot-loop-huawei-g610-t2872171 ) but I guess they don´t match with my problem
Thank you a lot for your time!
Click to expand...
Click to collapse

Kdio said:
Hi massino82
Thank you for using XDA Assist
As we do not have an specific forum dedicated for your device yet, our experts at the below forum should be able to help you. Please be welcome to ask in there.
Android Q&A, Help & Troubleshooting
Nice regards and good luck.
.
Click to expand...
Click to collapse
thanks, i post it now in the correct forum

Related

[Completed] How to install Gennxtnote4 on my grand 2?

so i wanted to install gennxtnote4 on my phone. i wonder if i should root my phone first before doing so and if installing gennxtnote4 will erase all the data? and also how do i apply the "vibration patch" and the "fullscreen caller" patch? i'd appreciate any help. you may contact me through [email protected] Thanks!
Hi there,
All you need is in the ROM thread from here: [ROM][4.4.4][SM-G7102]GenNxt N4 Project
Instructions :-
1- Download the rom zip file and place it in ur phone internal memory
2- Boot your phone in CWM Recovery by pressing ( volume up + power button )
3- Reset Data in CWM Recovery
4- Choose install zip option in CWM Recovery and guide to the path of your Download rom
5- Aroma Installer starts and guide u to the installation
6- Reboot when Aroma installation ends
7- Enjoy GenNxt Note4
Click to expand...
Click to collapse
For any other question please register an account and post here: [HELP THREAD][NOOB FRIENDLY] Ask Any Questions
Good luck

[Completed] My phone is messed up

Hi there,
I decided to install some ROM yesterday night because mine wasn't working very well.
Anyways, I placed the .rar file on my external SD root folder, then did the up+down+power button thing. The installation turned out to be successful, but by the time I rebooted my phone it got stuck on HUAWEI logo.
With that being said, I don't know what to do anymore. I ONLY can access to the TWRP recovery mode.
Thank you guys in advance.
Actually, I'll give you a solution that a "forummate" found out a year ago.
- Restored original B510 recovery (flash recovery.img and boot.img from the original B510 rom, it's inside the TWRP thread...)
- Added the B132 update to my external SD card. (Create a folder /dload/ and add the UPDATE.APP file to it)
- Started the phone in recovery mode by by pressing volume up + volume down + power
- Updated to B510 again via update.zip in the /dload/ folder
But I'm totally clueless about the first step.
Hi there
You'd be best served asking for help from the experts who own your device, here:
Ascend P6 Q&A, Help & Troubleshooting
Good luck

[Completed] HELP HELP !! BOOTLOOP [ROOTED] witout cwm

Hi guys . I need your help ..
I have a Firefly Intense X and i rooted it using Kingo and it works fine .. Then I downloaded Pimp My Rom to customized my rom .. I had fun customizing it and it always works fine. Then i'm not contented with my phone's performance so I adjusted it again until I bump in to the adjusting its dpi. I'm not sure if its under Dalvik VM or kernel tweaks .. Then adjust another thing . I don't remember what it is but I remember that it has 'step n1' then again , I adjust something then I click the last step the 'step n(x) - reboot' . then after that , it reboot over and over and over again .. I mean it will show the Company logo the the boot animation then it will go to the homescreen then says download failed after a few seconds , it will go back to the boot animation then go to the homescreen then reboot the again and again and again ..
My phone is recognized by the computer at the device manager under Adb Interface as HTC Dream but my phone is Firefly Mobile. I thought it will appear under 'Other devices' with a yellow warning sign but it's now . I'ts under Adb Interface. I tried to unistall it many times but it is always an HTC Dream. I also downloaded the adb setup 1.4.2 .
I wipe factory data and cache but it is still happening. I already try to go to the fastboot and unlock but i can't unlock it . It says volume up for yes and volume down for no, I click my volume up and nothing is happening. And I also tried to " adb push <filename> /sdcard/. " and it says 'no such file or directory' but the file name I inserted is correct and it is placed to the correct folder. I also tried to removed my sdcard and direct it at my pc and put a new downloaded custom rom and insert it again to my phone but I can't find it when I choose to 'apply update from sdcard'.
NOTE:
I can go to recovery mode and fastboot mode (locked) only not on a CWM.
Please please please .. I need a solution for this problem. And if you have please make it a step-by-step process.
I need you guys .
PLEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAASE
Hi,
Thanks for using XDA Assist Please post here Android Q&A, Help & Troubleshooting
Good Luck!
Thread Closed.

Nexus 5 in bootloop

Hi
I will explain the issue in sequence
1. I was running custom ROM on my Nexus 5.
2. One day the device was stuck in flying colour dot animation and never came out of that
3. I went to recovery mode and cleaned the cache but there was no change
4. I did a complete factory restore. Nothing got resolved (The USB debugging option got disabled during this :crying: )
5. I again tried to go to recovery mode. Suddenly TWRP started asking password for decryption. I don't remember enabling encryption and setting a password. I don't even have a screen lock. I trided "default_password" which didn't help.
ibb.co/j32CSw (Add http to open the link. I am not able to add external link)
5. I pressed cancel , which redirected to this screen
ibb.co/d4wvfG
6. I selected install option and went to this screen. There was nothing displayed
ibb.co/iXvXSw
7. I pressed back and selected ADB sideload and selected clean cache, which also failed with these messages
ibb.co/for6nw
8. I pressed back again and selected mount option and tried to mount system and firmware which again landed in password screen
ibb.co/dXY2Sw
ibb.co/kor6nw
9. ADB and fastboot were not able to identify the device when I connected to PC through USB. I can see this message poping up on Windows
ibb.co/bHxMnw
Please suggest a solution for this
vivekt008 said:
Hi, I will explain the issue in sequence...
Click to expand...
Click to collapse
I don't have this device but, your best bet is to start by posting this question within the following thread for your device.
https://forum.xda-developers.com/showthread.php?t=2496506
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE

Problem About Huawei 4C

Hi
​My Huawei 4C is broken every time I run it .... its run on emergency data
and show me tow option:
1- factory data reset
2- restart
what I chose it's come back to emergency data
and the devices still restart if I do nothing
I download stock firmware and I put the ( updata.app ) in dlod folder in SD card and turn off the device and press ( Vol + ) + ( Vol - ) + ( Power ) it's run into recovery and nothing happened
I tried download update.zip for Huawei 4C and I put it in dlod folder in SD card and I run the device into recovery and chose apply update from sd card and chose update from extrnal SD it's tell me update.zip not found even if I chose update from internal sd just like the same update.zip not found
even I tried enter to fastboot but the computer not recognized my phone even nothing found in device manger
What can I do now?
Thanks​
IRAQIGHOST said:
Hi, My Huawei 4C is broken every time I run it .... its run on emergency data.....
Click to expand...
Click to collapse
I don't have this device but, you should be able to obtain some member guidance within the following Q&A thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3392727
Good Luck!
~~~~~~~~~~~~~~~
Sent using The ClaRetoX Forum App on my SM-G900V device.
Ibuprophen said:
I don't have this device but, you should be able to obtain some member guidance within the following Q&A thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3392727
Good Luck!
~~~~~~~~~~~~~~~
Sent using The ClaRetoX Forum App on my SM-G900V device.
Click to expand...
Click to collapse
thanks man

Categories

Resources