Just the 4 steps are very easy..
[NOTE : INTERNET CONNECTION MUST BE NEEDED]
Download this application ===>>https://drive.google.com/open?id=0Bz7mC4zOd_hiSTVYcW4xOTBrZkk
1 } Unable USB debugging in the phone ...
2 } Install and Open the Downloaded App , Connect Your device via USB cable...
3 } Allow the access to the PC/Laptop for using device when the pop-up will be there after connecting your device..
4}Click on Root button !!
your phone will be restarted in few minutes ...
It's done :good::good::good::good: ENJOYY !!!!
Don't forget to Rate
Do we need to unlock bootloader to do this? How to unlock bootloader? Will this works 100%? Pls help..
Related
hello world.
i have non cellular chines tablet " marshal tablet me-700a" with android 4.0.3 and i want to root that for install some app. please help me.
i have it so! please help us!
Rooting Marshal ME-700A / ME-700B
you can root your device easly using following steps:
1. download and install unlock root. (u can google it and download free or pro edition from its official website)
2. enable usb debugging in your device (Setting>developer options>usb debugging)
3. attach your device to your pc and run the unlock root.
4. unlock root will show ur device name and press root and wait till device be restarted.
5. congratulations, you have done!
don't forget too install adb drivers on your pc, otherwise unlock root would not recognize ur device.
i'm not responsible for anything happens too your tablet. So do it on your own risk
Marshal ME-701
Hey guys , please help me to root my Marshal Me-701 please :crying:
Hi
Can you help me?
Does this device have normal HDMI out put, I mean it needs a mhl adaptor or I supports usual HDMI port?
And is it capable of playing 1080p videos?
Thanks for answers.
Hello All!
As You people know i always post things for QMobile A2 users but today i am posting for QMobile A4 bolt users
I was receiving messages nd also peoples were posting nd asking on the page that to how to root this A4 bolt !!!
Dear QMobile A4 bolt users ur prob is now solved & em here to get ur phone rooted nd cwm recovery installed!!!
This method is not checked by me nor any a4 bolt users but this method is checked by users of A4 clone phone!! nd this method is also i took from clone phones thread so full credit to them but also me to gather the info nd mix them in 1 thread coz i hv gathered this info from diifernet blogs! nd some info is by me!!
WARNING!!!
I am not responsible for any brick or broken hearts so dont blame me in any case!!
EDIT
The Below method is 100% working nd checked. Also the below method of rooting is working for a2 bolt lite too!!
prove
Root Method
REQUIREMENTS
1 QMobile A4 bolt
2 Orignal data cable
3 Moroboro pc suite for installing drivers automatically| DOWNLOAD IT
4 Unlock root |DOWNLOAD
5 this is optional if unlock root will not work then use it for rooting! srsroot |DOWNLOAD
6 A brain
Procedure
1) Attach your phone to the computer and turn on usb debbuging from Settings>applications>development>USB Debugging ...windows will try finding the drivers for it named e56 and will oviously fail..
2) Start moborobo pc suite.. it will search for devices and will auto install the drivers for your phone.
3) Disconnect the phone and exit the moborobo pc suite. exit it from status bar dont just close it.
4) Connect the phone again and start Unlockroot or srs root..
5) Click on the root button..Unlockroot will automatically search for the device(Named E56). Select it.
6) The rooting process will start and your phone will be rebooted. and you will see the SuperSu app in the app drawer.
NOW AFTER ROOTING ,
Install Clockworkmod Recovery
REQUIREMENTS
1 A brain
2 ADB pACKAGE |DOWNLOAD
3 QUICK BOOT |install it on ur phone via play store
4 CWM recovery | DOWNLOAD
Procedure
1) Now Extract the ADB package in your Pc root drive (Basically the root drive is C: drive )
2) Download the Recovery from above
3) Extract the ADB package & you will get an adb folder. Now put the Recovery.img downloaded above in that adb folder.
4) Now Enable USB debugging in your phone by going to Settings->Development->USB Debugging (Skip this step if it is already enabled)
5) Now Download the Quick Boot App from above & install it in your Mobile. Open that App & click on Bootloader option.
6) After sometime your phone will get stuck at the logo. (don’t panic)
7) Connect your phone to PC using USB cable.
8) Now open the adb folder & inside that folder press & hold the Shift key + right click on blank space & choose Open Command Window Here.
9) Now a black cmd window will open, there type fastboot devices
Note :- This should display your device name in Fastboot mode, if nothing is shown, then you have to Follow this to install adb drivers
10) Now Type fastboot flash recovery recovery.img
Within a sec the process will get over & it will install the cwm recovery img on your QMobile A4 Bolt
Now you can check whether your CWM is working or not:-
Remove battery of your phone and reinsert.
Press Power and Volume Up key to boot into recovery mode.
If it get booted into recovery mode then it mean you have successfuly installed it, if not then try the process again.
ENJOY QMobile A4 bolt users , now u hv rooted & cwm recovery installed!
DONT copy this method to other blogs nd websites!!
Qmobile A4 Bolt users HIT that THANKS button because i deserve that!!
I could not enter the bootloader mode through quikboot aap on my Bolt a2 lite,,,,however i have rooted it successfully.... kindly let me know to install CWM???
I have a solution for you very easy and fast it takes only 2 mints works on almost every android smartphone 2.3.x (gingerbread) + ,,,,,
so go ahead...
Step No 1: Download vroot windows app from the given link
Step No 2: Install and run it in your Pc
Step No 3: Connect Your Phone Via Usb Cable and check usb debugging option, wait until vroot detects your phone once it's detected click the re-root button ( if you are rooted before ) and now your phone is reboot automatically wait for it to turn on,,,,
now you can see a chiness super su application in your app drawer... don't do anything with this app simply connect your mobile again and check usb debugging option and now click unroot .... Voila you have successfully unroot your mobile
Sorry For My Bad English
I am not responsible for Bricked device while installation
Note- Maybe it work on Xolo one Lollipop.I am not try on Lollipop Xolo one.
INSTALL INSTRUCTIONS
1 Download vRoot for PC
Link-From Here
http://vroot.soft112.com/download.html
OR, DOWNLOAD FROM OFFICIAL VROOT WEBSITE
2 Now Connect Your Xolo One to PC.
3 Make sure You Enabled Your USB Debugging On & At Least 50% Battery Charged.
4 Now connect your Phone To PC and open vRoot app on PC
***IF Your Xolo One Detected then start next process***
5 On the vroot program, click on the ROOT button ( Green button ) to begin*rooting Xolo One.
6 The rooting process will take only a few minutes to complete.
7 You’ll be prompted by the program once it has rooted your device.
8 The device will then automatically reboot itself.
9 Congratulation! You’ve just rooted*Xolo One!
CREDITS
@vroot.com
If It work Or it Helpful for You Then Please Pressed Thanks....
Hi guys ....
I am using lenovo p70-a ...android 5.1... i want to root this device ...i downloaded farmaroot ....and installed it when i open it it shows a message your device seems not vulnerable exploit include in farmaroot .....so anyone can give me the solution how can i root my device .....anyone help me please
Download and install One Click Root onto your PC or Mac.
Connect your Android to your computer using a standard USB cable.
Open ‘Developer Options’ and enable USB debugging.
Run One Click Root and let the software complete all remaining steps.
For more help check Lenovo P70 Manual.