I am not responsible for Bricked device while installation
Note- Maybe it work on Xolo one Lollipop.I am not try on Lollipop Xolo one.
INSTALL INSTRUCTIONS
1 Download vRoot for PC
Link-From Here
http://vroot.soft112.com/download.html
OR, DOWNLOAD FROM OFFICIAL VROOT WEBSITE
2 Now Connect Your Xolo One to PC.
3 Make sure You Enabled Your USB Debugging On & At Least 50% Battery Charged.
4 Now connect your Phone To PC and open vRoot app on PC
***IF Your Xolo One Detected then start next process***
5 On the vroot program, click on the ROOT button ( Green button ) to begin*rooting Xolo One.
6 The rooting process will take only a few minutes to complete.
7 You’ll be prompted by the program once it has rooted your device.
8 The device will then automatically reboot itself.
9 Congratulation! You’ve just rooted*Xolo One!
CREDITS
@vroot.com
If It work Or it Helpful for You Then Please Pressed Thanks....
Related
Hello All!
As You people know i always post things for QMobile A2 users but today i am posting for QMobile A4 bolt users
I was receiving messages nd also peoples were posting nd asking on the page that to how to root this A4 bolt !!!
Dear QMobile A4 bolt users ur prob is now solved & em here to get ur phone rooted nd cwm recovery installed!!!
This method is not checked by me nor any a4 bolt users but this method is checked by users of A4 clone phone!! nd this method is also i took from clone phones thread so full credit to them but also me to gather the info nd mix them in 1 thread coz i hv gathered this info from diifernet blogs! nd some info is by me!!
WARNING!!!
I am not responsible for any brick or broken hearts so dont blame me in any case!!
EDIT
The Below method is 100% working nd checked. Also the below method of rooting is working for a2 bolt lite too!!
prove
Root Method
REQUIREMENTS
1 QMobile A4 bolt
2 Orignal data cable
3 Moroboro pc suite for installing drivers automatically| DOWNLOAD IT
4 Unlock root |DOWNLOAD
5 this is optional if unlock root will not work then use it for rooting! srsroot |DOWNLOAD
6 A brain
Procedure
1) Attach your phone to the computer and turn on usb debbuging from Settings>applications>development>USB Debugging ...windows will try finding the drivers for it named e56 and will oviously fail..
2) Start moborobo pc suite.. it will search for devices and will auto install the drivers for your phone.
3) Disconnect the phone and exit the moborobo pc suite. exit it from status bar dont just close it.
4) Connect the phone again and start Unlockroot or srs root..
5) Click on the root button..Unlockroot will automatically search for the device(Named E56). Select it.
6) The rooting process will start and your phone will be rebooted. and you will see the SuperSu app in the app drawer.
NOW AFTER ROOTING ,
Install Clockworkmod Recovery
REQUIREMENTS
1 A brain
2 ADB pACKAGE |DOWNLOAD
3 QUICK BOOT |install it on ur phone via play store
4 CWM recovery | DOWNLOAD
Procedure
1) Now Extract the ADB package in your Pc root drive (Basically the root drive is C: drive )
2) Download the Recovery from above
3) Extract the ADB package & you will get an adb folder. Now put the Recovery.img downloaded above in that adb folder.
4) Now Enable USB debugging in your phone by going to Settings->Development->USB Debugging (Skip this step if it is already enabled)
5) Now Download the Quick Boot App from above & install it in your Mobile. Open that App & click on Bootloader option.
6) After sometime your phone will get stuck at the logo. (don’t panic)
7) Connect your phone to PC using USB cable.
8) Now open the adb folder & inside that folder press & hold the Shift key + right click on blank space & choose Open Command Window Here.
9) Now a black cmd window will open, there type fastboot devices
Note :- This should display your device name in Fastboot mode, if nothing is shown, then you have to Follow this to install adb drivers
10) Now Type fastboot flash recovery recovery.img
Within a sec the process will get over & it will install the cwm recovery img on your QMobile A4 Bolt
Now you can check whether your CWM is working or not:-
Remove battery of your phone and reinsert.
Press Power and Volume Up key to boot into recovery mode.
If it get booted into recovery mode then it mean you have successfuly installed it, if not then try the process again.
ENJOY QMobile A4 bolt users , now u hv rooted & cwm recovery installed!
DONT copy this method to other blogs nd websites!!
Qmobile A4 Bolt users HIT that THANKS button because i deserve that!!
I could not enter the bootloader mode through quikboot aap on my Bolt a2 lite,,,,however i have rooted it successfully.... kindly let me know to install CWM???
Hi guys today I will show u how to root Karbonn A9*(Star).
I have personally tested the rooting guide & confirmed to be working on Karbonn A9*(Star)
Karbonn A9*(Star) is a re-branded K-TOUCH W656
Requirments-
1-Pdanet: http://pdanet.co/bin/PdaNetZ350.exe
2-Unlock Root Software: http://www.mediafire.com/download/7p46fdcgnjtf285/UnlockRoot_2.3.0.exe
Steps to root Karbonn A9*(Star) :-
1) Enable USB Debugging on your Karbonn A9*(Star). (By going to Settings > Applications > Development > USB debugging)
2) Download the Pdanet driver, its an executable file (.exe) so after downloading double click on it, to install it.
3) After completing driver installation, download the Unlock root software from the requirement area, its an executable file (.exe), so double click it to install.
4) Connect your Karbonn A9*(Star) with computer via USB cable & open the Unlock root software. Wait for few minute to stabilize the driver & in mean time Unlock root will auto detect your handset.
5) Now choose the Karbonn A9*(Star) from the drop down list of auto detected device.
6) Hit the big ROOT button to start the karbonn A9*(Star) rooting process.
7) Wait for few minutes for the process to complete, then a success message will be displayed on your pc screen.
8) Now disconnect the USB cable & restart/reboot your A9*(Star).
After a long day of searching on how to root this device FINALLY!!! I got it.
NOTE: I AM NOT RESPONSIBLE IF SOMETHING HAPPENED TO YOUR PHONE
I root this device with iRoot
STEP 1- Download iroot
just check google for that
Step 2- Connect your device to your PC make sure that USB debugging is enable
Step 3- Wait for the iRoot to recognize your device and then when you see on your PC that your device is connected Click "root now"
Step 4- Now when your device is rooted you will see an icon that is like a horse and it said its a superuser (its different from the typical superuser or superSU that rooted device has) then go to the play store and install root checker to check if your device is rooted already.
if you want to have a typical superSU icon you can just download it on the play store just type "superSU" by chainFire
Thats how I root my CHERRY MOBILE OMEGA ICON A.K.A MICROMAX A121
Thanks.......:good::good::good:
Hi,
Awesome! Here is the place for such posts though,
http://forum.xda-developers.com/android/general
Thanks! ?
Micromax Canvas Tab P650
How to Root ?
Isearch lots of forums
download lots of software and try on my tab
but in vein for Rooting my Micromax P650 tab
finally I download Kingo ROOT windows software ver 1.3.1
and root my tab successfully
DOWNLOAD
Process (after download and installation successfully on you PC/Laptop I tested in Windows 7 Ultimate)
1. Connect You tab with USB cable and check Developer Option=>USB Debugging in Connected by Right on check box
2. Run Kingo ROOT (it will automatically detect the status of your device.
3. Press Button Root (it will take 2 to 5 minutes............. display messages
4. finally it will display a message like included image here
Your device is ROoted
Use this at Your own RISK. I M not RESPONSIBLE FOR ANYTHING whatever may happen with your Tab.
IF YOU FIND THESE INFORMATION FOR USEFUL FOR YOU HIT THANKS OR COMMENT PLZ
:good:
Instead of all this lengthy procedure, use FramaRoot APK which works well with P650.
http://forum.xda-developers.com/attachment.php?attachmentid=2784451&d=1402084843
Install it, select any exploit, reboot, SuperSU installed by default! Enjoy!
Uninstall FramaRoot after rooting, unroot can also be done with FramaRoot!
IF I HELPED YOU HIT THE THANKS BUTTON! :good: :good: :good: :good: :good: :good: :good:
i had bought this phone from local distributor in Egypt less than one month ago.
i had tried several rooting methods starting from MTKtools to Vroot methods
unfortunately all had failed
through this simplified tutorial i will guide you how to root your G-TiDE V1 simply and obtain full root access
we all know that "the best thing for android is just root"
there are no need for TWRP/ CWM to root via this method
you just need your V1 device,
functioning USB cable,
windown runing combuter,
and an internet connection for both.
1st download and install china phones USB drivers http://ge.tt/2yL21VT thanks @rua1
download and install MTk droid tools http://forum.xda-developers.com/showpost.php?p=49597819&postcount=922 thanks @rua1
you have to try which driver would make your device readable by the droid tools
do not froget to activate USB debugging option in developer option menu after tabbing build number 7 times in about phone.
do not try to root via droid tools as it will not work
download and install Iroot version 1.7.9 to your PC and Vroot app to your phone.
https://drive.google.com/file/d/0B3ZlnmUEzg9jRWltQmRwTjA2SEk/view?usp=sharing
https://drive.google.com/file/d/0B3ZlnmUEzg9jZm9MUUtUWGk2aGs/view?usp=sharing
all your things are ready now
try to root your internet connected phone using vroot.apk
it will say succeeded and ask for a reboot: reboot yor phone
you will notice that a new crowned white lion app with blue shield (Chinese superuser app)
when you open it you will find no root access and iroot recommendation: install iroot and repeat the above steps
your phone still unrooted till now while when you connect it to droid tools it will show yellow box saying that the file bin/su is found click root to get root shell ( do not try; it will not work.
now reboot your phone to recovery from droid tools
perform wipe cache and factory reset then reboot
activate your phone developer option and tick USB debugging
open iroot PC application
connect your phone, when phone is detected try computer based rooting
it will reboot phone twice and then your device is now rooted: congrats
if you hate Chinese superuser app use the following tutorial to replace with SuperSu
http://neyomissright.credit495.ru/watch/crLvs8ec0FE/httpsyoutubecomdevicesupport.html
i am doing this now :fingers-crossed:
not to forget to thank all people and all sites that i read through them to do this.:good:
this is a call for all carrying G-TiDE V1 to be here to start a big development project.
enjoy.
photos and screenshots to be posted.
reminder
do not try nto replace super user app using this tutorial
http://neyomissright.credit495.ru/watch/crLvs8ec0FE/httpsyoutubecomdevicesupport.html
it will cost you your root.
it is just a spam.
I would advise you to try Root Genius which I had succeeded in gaining root from MT8732 tablet Ainol AX10-4G. The current version is RootGenius_en_2.2.6.exe not version 1.8.7 as shown in their English site.
There is APK version available from Official Chinese site but I managed to try out PC version only. Good luck
I need g-tide V1 software....pl help me