Samsung s duos GTs7562 stuck at samsung logo - Samsung Galaxy S Duos

HI all,
I used rashr for flashing my phone(Samsung s duos GTs7562) as it doesn't get connected via USB . I flashed cwm recovery but it was unable to back up the samsung ROM. So I flashed TWRP recovery on my phone using rashr.
The app showed a dialog box which said go to recovery after pressing that my phone is now stuck on samsung logo.
The mobile goes into download mode but I'm unable to used ODIN as the phone is not detected by my PC.
It would be great if somebody can guide me on how to fix this problem.
thanks in advance.

If twrp is working, then flash cwm first and via cwm flash 'stock optimised rom'

Ritik99 said:
If twrp is working, then flash cwm first and via cwm flash 'stock optimised rom'
Click to expand...
Click to collapse
TWRP is not working I can only go to download mode.
But my device doesn't get connected to PC via USB so I couldn't use ODIN or ADB

Try installing samsung kies or usb drivers on computer , phone will get detected after this .
---------- Post added at 03:32 AM ---------- Previous post was at 03:27 AM ----------
Follow this guide, it will help
http://forum.xda-developers.com/showthread.php?t=3246791

Ritik99 said:
Try installing samsung kies or usb drivers on computer , phone will get detected after this .
---------- Post added at 03:32 AM ---------- Previous post was at 03:27 AM ----------
Follow this guide, it will help
http://forum.xda-developers.com/showthread.php?t=3246791
Click to expand...
Click to collapse
I had tried Kies before but it didn't get detected also tried universal ADB drivers and google USB drivers but still it won't get detected. When I connect to PC it says USB device malfunctioned and hence not discoverable
I also tried the SD card method in post you linked but no difference

Then take it to service center they will fix it

Ritik99 said:
Then take it to service center they will fix it
Click to expand...
Click to collapse
I took it to service center but they refused to repair it as it is rooted

rikkupaul said:
I took it to service center but they refused to repair it as it is rooted
Click to expand...
Click to collapse
Go to private repair shops , they will not refuse

Related

[galaxy fit] rooting and installing cwm [galaxy fit]

Hi friends i hav rooting files and cwm for galaxy fit
i have downloaded it from xda long ago
So credits goes for uploaders
ROOTING:
copy update.zip to sd card
swith on in recovery mode(HOME+POWER buttons)
install update from sd card
UPDATE.ZIP
http://www.mediafire.com/?olbuknicmmiaivr
CWM FOR GALAXY FIT:
INSTALLABE ONLY WITH ODIN
download odin
select beni_v1.0.ops in OPS tab
tick one package option (top right end)
then in one package tab select Tar file downloaded by the given link
Switch on your mobile in downloading mode before connecting your device to pc (VOLUME DOWN + HOME + POWER BUTTON)
ODIN : http://www.mediafire.com/?qron4v59q311d1a
BENI_v1.0.ops : http://www.mediafire.com/?3mf66q86wc75cfh
CWM tar file : http://www.mediafire.com/download.php?9eb89mi3myq4c6y
NOW UR MOBILE HAS CWM AND IT IS ROOTED
A noob question: How do I unroot?!
in what state must the device be in order to connect to ODIN..?? (powered on, recovery, download)
mikekir97 said:
in what state must the device be in order to connect to ODIN..?? (powered on, recovery, download)
Click to expand...
Click to collapse
Download mode.
It`s a logo with android triagle saying: Downloading... under it
k3eNaNz said:
Download mode.
It`s a logo with android triagle saying: Downloading... under it
Click to expand...
Click to collapse
ok.. I managed to get there but my pc says "USB Device nor recognized" what do I do.. I tried installing Samsung's USB drivers but no luck.. ODIN doesn't connect with the device.. what can I do..?? Thanks..
mikekir97 said:
ok.. I managed to get there but my pc says "USB Device nor recognized" what do I do.. I tried installing Samsung's USB drivers but no luck.. ODIN doesn't connect with the device.. what can I do..?? Thanks..
Click to expand...
Click to collapse
Install Kies. That is gonna install your USB drivers, but make sure Kies is NOT running during ODIN process.
Here is a more detailed tutorial how to root and install Custom recovery on S5670 fit
http://forum.xda-developers.com/showthread.php?t=1595441
k3eNaNz said:
Install Kies. That is gonna install your USB drivers, but make sure Kies is NOT running during ODIN process.
Here is a more detailed tutorial how to root and install Custom recovery on S5670 fit
http://forum.xda-developers.com/showthread.php?t=1595441
Click to expand...
Click to collapse
Thank you my friend but someone finally helped me and I managed to install CMW from stock recovery..

[Q] Galaxy fit not booting up and unable to connect to pc

I have Samsung Galaxy Fit-S5670 with android 2.3.4.
Few days before i have rooted my device for some days. After that i unrooted it due to some problems occurring in it. The WiFi keep on always, and never switched off. Also unable to tether hotspot.
USB connection also not working with windows 7 PC. It keeps on saying "USB not recognized", also installed drivers, but nothing happened.
Now I tried to install CyanogenMod 10 using recovery mode. It said "Successful" but my device is not starting, samsung screen is coming and next "Android . . . " is coming . nothing further is happening.
Please anybody help me.
mohitum007 said:
I have Samsung Galaxy Fit-S5670 with android 2.3.4.
Few days before i have rooted my device for some days. After that i unrooted it due to some problems occurring in it. The WiFi keep on always, and never switched off. Also unable to tether hotspot.
USB connection also not working with windows 7 PC. It keeps on saying "USB not recognized", also installed drivers, but nothing happened.
Now I tried to install CyanogenMod 10 using recovery mode. It said "Successful" but my device is not starting, samsung screen is coming and next "Android . . . " is coming . nothing further is happening.
Please anybody help me.
Click to expand...
Click to collapse
Did you installed ClockWorkMod Recovery or you used stock recovery to install the ROM?
mohitum007 said:
I have Samsung Galaxy Fit-S5670 with android 2.3.4.
Few days before i have rooted my device for some days. After that i unrooted it due to some problems occurring in it. The WiFi keep on always, and never switched off. Also unable to tether hotspot.
USB connection also not working with windows 7 PC. It keeps on saying "USB not recognized", also installed drivers, but nothing happened.
Now I tried to install CyanogenMod 10 using recovery mode. It said "Successful" but my device is not starting, samsung screen is coming and next "Android . . . " is coming . nothing further is happening.
Please anybody help me.
Click to expand...
Click to collapse
Install latest samsung driver
flash samsung firmware via odin
Abhi04 said:
Install latest samsung driver
flash samsung firmware via odin
Click to expand...
Click to collapse
He said that he installed the drivers.Try to uninstall them and install Kies from Samsung and try to connect with that,but you need to flash the stock firmware via Odin
mohitum007 said:
I have Samsung Galaxy Fit-S5670 with android 2.3.4.
Few days before i have rooted my device for some days. After that i unrooted it due to some problems occurring in it. The WiFi keep on always, and never switched off. Also unable to tether hotspot.
USB connection also not working with windows 7 PC. It keeps on saying "USB not recognized", also installed drivers, but nothing happened.
Now I tried to install CyanogenMod 10 using recovery mode. It said "Successful" but my device is not starting, samsung screen is coming and next "Android . . . " is coming . nothing further is happening.
Please anybody help me.
Click to expand...
Click to collapse
gabyif said:
Did you installed ClockWorkMod Recovery or you used stock recovery to install the ROM?
Click to expand...
Click to collapse
Where to install it ? On device or PC? I am stucked in the device boot unable to start device.
mohitum007 said:
Where to install it ? On device or PC? I am stucked in the device boot unable to start device.
Click to expand...
Click to collapse
CWM install on the device and then try to reflash CM 10.1
Download it from here:http://forum.xda-developers.com/showthread.php?t=1339640
gabyif said:
CWM install on the device and then try to reflash CM 10.1
Download it from here:http://forum.xda-developers.com/showthread.php?t=1339640
Click to expand...
Click to collapse
Can i install it using recovery mode? Because usb not recognized on PC that is why i can't install through Odin Multi Downloader.
mohitum007 said:
Can i install it using recovery mode? Because usb not recognized on PC that is why i can't install through Odin Multi Downloader.
Click to expand...
Click to collapse
No you can't,but you need to go in Download mode(Power+Volume Down+Home button) to install it.
It should recognize your phone
gabyif said:
No you can't,but you need to go in Download mode(Power+Volume Down+Home button) to install it.
It should recognize your phone
Click to expand...
Click to collapse
But it is not recognized in download mode too......:'(
mohitum007 said:
But it is not recognized in download mode too......:'(
Click to expand...
Click to collapse
is it going in download mode ?
if it is and mobile is not recognized then try reinstalling mobile usb drivers
Sent from my GT-S5670 using xda premium
soham jambhekar said:
is it going in download mode ?
if it is and mobile is not recognized then try reinstalling mobile usb drivers
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
Ok i will try that too...and check if it works !!!
Do you have any download link for latest drivers?
www.mediafire.com/?h4waxh8r5twuwuq
this is the link to samsung usb driver installer
Sent from my GT-S5670 using xda premium
not connect kaise
hi
i m using jana rom when i try to connect whit samsung kaise there no responses found..
what to do ??
nirajkrm1 said:
hi
i m using jana rom when i try to connect whit samsung kaise there no responses found..
what to do ??
Click to expand...
Click to collapse
Maybe your baseband version isn't of ur country/region. Also check ur drivers
Sent Via XDA™ Premium
IT seems to me that u tried to instal cm10.1 with stock recovery( isn't it). if u did u probably soft bricked ur device.. if not if u hv installed cwm recovery 5 by tj style using odin multi downloader...then tried to install cm10.1 then wipe data and try installing the rom again....
Second; if u hv stock recovery + soft bricked ur device and u cannot connect to ur computer then probably u hv no choice but to goto local mobile repair center... in your device the charging ic may have been damaged which will they replace for rs.200/- and flashing ur device back to normal will cost u rs.200/- extra....using their circuits..something z-box....
third; if u went to authorised samsung care they will blindly charge u rs.4000/- for changing motherboard and messing up the software...which noboy wants.. or ucan makeup a story and fool them and replace ur motherboard if under warranty...
fourth; try to check with local mobile repairwallah and u can yourself flash stock rom at local internet cafe...and then root then instal cwm5 recovery then install diifferent roms for our device.....
take care..:good: luck
i need a recovery for galaxy fit
hi i have bricked my samsung galaxy fit beaucouse after root with apply from sd card i tried to install a room with my stock recovery (orginal recovery) and now when i switch on it shows only logo of sasmung. my charging ic is not working and doesnt so please help me with a recovery than can be installed from stock recovery please helppppp i know how to use odin beaucouse i have rooted and flashed so much phones but is not working to me helpp meeee pls
bosi255 said:
hi i have bricked my samsung galaxy fit beaucouse after root with apply from sd card i tried to install a room with my stock recovery (orginal recovery) and now when i switch on it shows only logo of sasmung. my charging ic is not working and doesnt so please help me with a recovery than can be installed from stock recovery please helppppp i know how to use odin beaucouse i have rooted and flashed so much phones but is not working to me helpp meeee pls
Click to expand...
Click to collapse
can you go to download mode? ( try power+volumeDown+home keys). if you can then simply flash a stock firmware from samfirmware.com via odin.
if you can't go to download mode then take a look at this conversation:
http://forum.xda-developers.com/showthread.php?t=2413137
ehsan-black said:
can you go to download mode? ( try power+volumeDown+home keys). if you can then simply flash a stock firmware from samfirmware.com via odin.
if you can't go to download mode then take a look at this conversation:
http://forum.xda-developers.com/showthread.php?t=2413137
Click to expand...
Click to collapse
Yes, but here is more precise link:
http://forum.xda-developers.com/showthread.php?t=2413137#4
please help me
ehsan-black said:
can you go to download mode? ( try power+volumeDown+home keys). if you can then simply flash a stock firmware from samfirmware.com via odin.
if you can't go to download mode then take a look at this conversation:
http://forum.xda-developers.com/showthread.php?t=2413137
Click to expand...
Click to collapse
yes i can go to download mode and to recovery mode but i have stock recovery and my charging ic dosent work and cable to so is inposible to connect to pc i want only a custum recovery that can be installed from stock recovery even a temporary recovery to install with apply from sd card beaucouse i havent find one for my galaxy fit.i find one but it was for galaxy young but dosent work please helppppppppp
helppp
hi i have bricked my samsung galaxy fit beaucouse after root with apply from sd card i tried to install a room with my stock recovery (orginal recovery) and now when i switch on it shows only logo of sasmung. my charging ic is not working and doesnt so please help me with a recovery than can be installed from stock recovery please helppppp i know how to use odin beaucouse i have rooted and flashed so much phones but is not working to me helpp meeee pls
i can go to download mode and to recovery mode but i have stock recovery and my charging ic dosent work and cable to so is inposible to connect to pc i want only a custum recovery that can be installed from stock recovery even a temporary recovery to install with apply from sd card beaucouse i havent find one for my galaxy fit.i find one but it was for galaxy young but dosent work please helppppppppp

How to enable usb debugging mode when phone is bricked

Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
Shahid Niazi said:
Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
Click to expand...
Click to collapse
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:
sonyu said:
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:
Click to expand...
Click to collapse
No I said I can't install a rom via recovery it gets unknown error ....
But Now I have another question how to enter mt5689 in Fastboot/Flash Mode manually via pc .....with flash tool......
plz can anyone tell how to enable usb debugging mode when phone is bricked.....
if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.
Shahid Niazi said:
Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......
Click to expand...
Click to collapse
Now listen to me very carefully! Don't even try to flash a new firmware to your mobile which is not for your mobile and face the same fate as did! Your place is needrom.com. just contact the site administrator for your device model and he will help you... Believe me!
Hi.....thanx for your reply brother.......
I downloaded the rom from needrom.com for my device mtk6589.....which is actually mtk6572
but after installing a rom with spflash tool....... my hand set gets dead....no usb no display no charging nothing.......
I flashed with spflash tool and process completed successfully with no error... but after installation of rom I safely remove usb of my device ... but when I try to turn my phone on then nothing happen.. now my phone is hard bricked.... Now Plz guide me what I should do now....
I heard from someone that I can be fixed with volcano box....
Plz can anyone tell me..
Did you choose correct model and version?
Sent from my Q900 using XDA Premium 4 mobile app
Kobro said:
if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.
Click to expand...
Click to collapse
You just brought a sigh of relief & smile to my face..
Not just that-you helped me restore my phone with less worry..
Thanks a tonne :angel:
software brick
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???
henno98.hg said:
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???
Click to expand...
Click to collapse
same problem here ..?? did u get any solution ??
Please Help...
Saraf Vikyath said:
same problem here ..?? did u get any solution ??
Click to expand...
Click to collapse
Nobody? You got a solution already?
I have a brick Xperia SP with UBL and I tried to relock via flashtool and then repair via Pc Companion, but still detects the modifications...
Guys....my question is how to enable usb debugging on a soft bricked device
help me bricked micrmex express 2 plz
my phone too .. I forgot to switch my USB debugging...
Help!!!!!
henno98.hg said:
I have a rooted and unlocked bootloader xperia s. What happened is that I was flashing a new software via cwm and its boot img but its stucks on boot img when restarting phone and I haven't enabled usb debugging so I can't install cwn. So anyone can help me???
Click to expand...
Click to collapse
Help i have the same problem, put a custom boot loader on an asus zenfone 2 ze551ml and I couldnt get my passcode to work so I put it in recovery mode and wipe devit cache and it took longer than it should so I forced phone off and ever since then the phjone turns on but loops. I have tried to manully put the phone fastboot and doing that but didnt work. and even tried to update from ADB and that even didnt work. I have tried everything but no luck. Please help me. or email me too [email protected]
The bootloader of my htc desire s is locked and the phone is also not turning on , my usb debugging modhe was disabled, now i need to unlock the bootloader . help me please
sonyu said:
So, you flashed a ROM via cwm.
A few lines later you mention that you can't install cwm... is there something I miss????
Whatever;
Can you enter Fastboot/Flash mode manually/via PC and flash a new ROM from there using Flash Tool?
Have you unlocked your bootloader?
Have you tried following these steps?
That's pretty much everything I can think of.
I hope it's just a software brick... :fingers-crossed:
Click to expand...
Click to collapse
hello!,i wanna ask some question
so right now my phone is stuck on boot or bootloop,and i actually have the stable rom in my phone but the name is not "update.zip" and i forgot to enable usb debugging,is there anyway to access my internal storage without usb debugging
my phone is xiaomi mi4,thanks!:good:
---------- Post added at 06:59 AM ---------- Previous post was at 06:54 AM ----------
Kobro said:
if you want to install a stock rom via odin, you dont need usb debugging to be on, just boot into odin/download mode (google to see how) and flash a stock rom, then do whatever you need.
Click to expand...
Click to collapse
hello so my phone is currently in bootloop,i have a stable rom in my internal storage but the name is not update.zip so i cant flash the rom,i forgot to enable usb debugging,is there anyway to access the internal storage via pc without usb debugging?,my current phone is mi4 xiaomi
Thanks!
chandrakaii said:
hello so my phone is currently in bootloop,i have a stable rom in my internal storage but the name is not update.zip so i cant flash the rom,i forgot to enable usb debugging,is there anyway to access the internal storage via pc without usb debugging?,my current phone is mi4 xiaomi
Thanks!
Click to expand...
Click to collapse
Stable rom as in stock rom? or a stable custom rom?
in any case. if you have cwm or twrp you should be able to access the file on your computer, or even transfer it to an sd if the phone has it..
if its a custom rom flashable zip though you you might as well just flash it.
if its a stock rom an you cant aces recovery then you have to redownload it to your pc....
Shahid Niazi said:
Hi.....thanx for your reply brother.......
I downloaded the rom from needrom.com for my device mtk6589.....which is actually mtk6572
but after installing a rom with spflash tool....... my hand set gets dead....no usb no display no charging nothing.......
I flashed with spflash tool and process completed successfully with no error... but after installation of rom I safely remove usb of my device ... but when I try to turn my phone on then nothing happen.. now my phone is hard bricked.... Now Plz guide me what I should do now....
I heard from someone that I can be fixed with volcano box....
Plz can anyone tell me..
Click to expand...
Click to collapse
Now you can't unbrick your phone because you overwritten the preloader of your phone. Remember: when flashing with SP flash tool you mustn't flash the preloader. The preloader is the file that makes possible the flashing with SP and now that you have overwritten it or flashed the wrong one, you probably won't be able to recover it. Take it to service center.
Sent by my iPad using Tapatalk

Bricked after flashing TWRP in Android

I have a GT SGH-i497 from AT&T. I rooted and flashed CWM recovery and CF-Auto-Root-espresso10att-espresso10uc-samsungsghi497.tar.md5 ROM. Everything was working great. Then I decided to flash TWRP recovery via TWRP Android app and not thru recovery, just to check TWRP out. Now tablet will not boot. PC would recognize it in device manager as QHSUSB_DLOAD. I then attempted to push the custom ROM and TWRP to SD card on tablet via ADB/ Fastboot. After doing so the tablet still does not boot and now my PC chimes when I connect the tablet, but in device manager it now says it is unknown. If I hold the power button while connected the PC chimes off and on. I have searched all forums all the way back to 2012, and I have not found any help. Does anyone here know what I can do to get my tablet back? Any and all help is appreciated. Thanks......:good:
Mr_Mxyzptlk said:
I have a GT SGH-i497 from AT&T. I rooted and flashed CWM recovery and CF-Auto-Root-espresso10att-espresso10uc-samsungsghi497.tar.md5 ROM. Everything was working great. Then I decided to flash TWRP recovery via TWRP Android app and not thru recovery, just to check TWRP out. Now tablet will not boot. PC would recognize it in device manager as QHSUSB_DLOAD. I then attempted to push the custom ROM and TWRP to SD card on tablet via ADB/ Fastboot. After doing so the tablet still does not boot and now my PC chimes when I connect the tablet, but in device manager it now says it is unknown. If I hold the power button while connected the PC chimes off and on. I have searched all forums all the way back to 2012, and I have not found any help. Does anyone here know what I can do to get my tablet back? Any and all help is appreciated. Thanks......:good:
Click to expand...
Click to collapse
try with odin and stock firmware
sergio_f said:
try with odin and stock firmware
Click to expand...
Click to collapse
Odin does not recognize the tablet.
ave you installed the drivers??
search for usbdeview, uninstall the drivers of the tablet or all drivers.. then install drivers again
sergio_f said:
ave you installed the drivers??
search for usbdeview, uninstall the drivers of the tablet or all drivers.. then install drivers again
Click to expand...
Click to collapse
Yes, in my initial post I stated that I pushed ROM and TWRP to tablet sdcard via ADB/ Fastboot, I read they install with the android drivers. But I will try the uninstall and search for the usbeview. Thanks for help I will post my findings/ results later this evening. :good:
odin recognize tablet if you boot it in download mode
power & vol buttons
regards
sergio_f said:
ave you installed the drivers??
search for usbdeview, uninstall the drivers of the tablet or all drivers.. then install drivers again
Click to expand...
Click to collapse
usbdeview worked to the driver status. I installed the QHSUSB_DLOAD drivers on PC and the PC now recognizes tablet when connected. Does anyone know where I can download the debrick image for the galaxy tab 2 10.1 AT&T model? Thanks
Mr_Mxyzptlk said:
usbdeview worked to the driver status. I installed the QHSUSB_DLOAD drivers on PC and the PC now recognizes tablet when connected. Does anyone know where I can download the debrick image for the galaxy tab 2 10.1 AT&T model? Thanks
Click to expand...
Click to collapse
There is none available, in my thread I asked the community to share from their working tabs. I haven't got any. Plus nobody has tried that method. It works or is it just a theory? we still don't know.

Bricked and dead Umidigi A3 - No more detected by PC - How to resolve it?

After wipe data factory reset i got bootloop in TWRP so i decided to reinstall Magisk but no change
after that i decided to flash new Rom
from TWRP i put the phone in bootloader Mod
I waist long time to prepare every thing but phone was no longer responding "Just black screen"
I tried every thing but no reaction from phone and not detected on PC
How could I resolve this?
Many thanks
hectogon said:
After wipe data factory reset i got bootloop in TWRP so i decided to reinstall Magisk but no change
after that i decided to flash new Rom
from TWRP i put the phone in bootloader Mod
I waist long time to prepare every thing but phone was no longer responding "Just black screen"
I tried every thing but no reaction from phone and not detected on PC
How could I resolve this?
Many thanks
Click to expand...
Click to collapse
Don't know if you'll see this but you need to download SP FLASH TOOL and use it to Flash whichever OS is right for your phone
I'll be waiting for a reply
This is it
BlazzerLazzer said:
Don't know if you'll see this but you need to download SP FLASH TOOL and use it to Flash whichever OS is right for your phone
I'll be waiting for a reply
Click to expand...
Click to collapse
ROM Mobile UMIDIGI A3 – ROM Android 8.1.0 ONLY MT6739
ROM 1 Official ROM UMIDIGI Version: UMIDIGI A3 V1.3 20181220 A3
Could you tell me please step by step to get it detected by computer and flash tool.
Under Windows 10.
hectogon said:
ROM Mobile UMIDIGI A3 – ROM Android 8.1.0 ONLY MT6739
ROM 1 Official ROM UMIDIGI Version: UMIDIGI A3 V1.3 20181220 A3
Could you tell me please step by step to get it detected by computer and flash tool.
Under Windows 10.
Click to expand...
Click to collapse
So first thing is first, get the stock image/flash file you want
Then load the android-scatter in the flash tool, then turn the phone off, all the way, plug into your PC and it will flash it for you
---------- Post added at 07:12 PM ---------- Previous post was at 07:09 PM ----------
hectogon said:
ROM Mobile UMIDIGI A3 – ROM Android 8.1.0 ONLY MT6739
ROM 1 Official ROM UMIDIGI Version: UMIDIGI A3 V1.3 20181220 A3
Could you tell me please step by step to get it detected by computer and flash tool.
Under Windows 10.
Click to expand...
Click to collapse
Hold the power button til it starts rebooting
The flash tool will find it before it even gets past startup
It'll reset it and your handset will be as good as new, btw, don't get the a3 pro! The OS looks like ****
When I plug the USB cable I got in device manager Unknown USB device
BlazzerLazzer said:
So first thing is first, get the stock image/flash file you want
Then load the android-scatter in the flash tool, then turn the phone off, all the way, plug into your PC and it will flash it for you
---------- Post added at 07:12 PM ---------- Previous post was at 07:09 PM ----------
Hold the power button til it starts rebooting
The flash tool will find it before it even gets past startup
It'll reset it and your handset will be as good as new, btw, don't get the a3 pro! The OS looks like ****
Click to expand...
Click to collapse
---
When I plug the USB cable I got in device manager Unknown USB device
hectogon said:
When I plug the USB cable I got in device manager Unknown USB device
Click to expand...
Click to collapse
You need to install fastboot drivers for the decide, I just used the universal driver that came with adb tools, which can be downloaded via Google. I cannot post links to those files as a new user, afterwards so flash tool should be able to auto detect and flash your device
I did it
BlazzerLazzer said:
You need to install fastboot drivers for the decide, I just used the universal driver that came with adb tools, which can be downloaded via Google. I cannot post links to those files as a new user, afterwards so flash tool should be able to auto detect and flash your device
Click to expand...
Click to collapse
Could you help me pls with a complet post or we will chat line by line?
Help sim card won't work
I bricked my a3 pro trying to install twrp. I flashed it back to normal using so flash tool but now it won't recognize my sim card. I put my sim in my old phone and it still works. If anyone could help me I would greatly appreciate it thanks

Categories

Resources